diff mbox series

[net-next,03/10,v2] ptp: ixp46x: move adjacent to ethernet driver

Message ID 20191101130224.7964-4-linus.walleij@linaro.org
State New
Headers show
Series IXP4xx networking cleanups | expand

Commit Message

Linus Walleij Nov. 1, 2019, 1:02 p.m. UTC 
From: Arnd Bergmann <arnd@arndb.de>


The ixp46x ptp driver has a somewhat unusual setup, where the ptp
driver and the ethernet driver are in different directories but
access the same registers that are defined a platform specific
header file.

Moving everything into drivers/net/ makes it look more like most
other ptp drivers and allows compile-testing this driver on
other targets.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v1->v2:
- Rename patch as "move ADJACENT" which makes more sense
---
 drivers/net/ethernet/xscale/Kconfig                | 14 ++++++++++++++
 drivers/net/ethernet/xscale/Makefile               |  3 ++-
 drivers/net/ethernet/xscale/ixp4xx_eth.c           |  3 ++-
 drivers/{ptp => net/ethernet/xscale}/ptp_ixp46x.c  |  3 ++-
 .../net/ethernet/xscale/ptp_ixp46x.h               |  0
 drivers/ptp/Kconfig                                | 14 --------------
 drivers/ptp/Makefile                               |  1 -
 7 files changed, 20 insertions(+), 18 deletions(-)
 rename drivers/{ptp => net/ethernet/xscale}/ptp_ixp46x.c (99%)
 rename arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h => drivers/net/ethernet/xscale/ptp_ixp46x.h (100%)

-- 
2.21.0
diff mbox series

Patch

diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index cd0a8f46e7c6..98aa7b8ddb06 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -27,4 +27,18 @@  config IXP4XX_ETH
 	  Say Y here if you want to use built-in Ethernet ports
 	  on IXP4xx processor.
 
+config PTP_1588_CLOCK_IXP46X
+	tristate "Intel IXP46x as PTP clock"
+	depends on IXP4XX_ETH
+	depends on PTP_1588_CLOCK
+	default y
+	help
+	  This driver adds support for using the IXP46X as a PTP
+	  clock. This clock is only useful if your PTP programs are
+	  getting hardware time stamps on the PTP Ethernet packets
+	  using the SO_TIMESTAMPING API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_ixp46x.
+
 endif # NET_VENDOR_XSCALE
diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile
index 794a519d07b3..607f91b1e878 100644
--- a/drivers/net/ethernet/xscale/Makefile
+++ b/drivers/net/ethernet/xscale/Makefile
@@ -3,4 +3,5 @@ 
 # Makefile for the Intel XScale IXP device drivers.
 #
 
-obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+obj-$(CONFIG_IXP4XX_ETH)		+= ixp4xx_eth.o
+obj-$(CONFIG_PTP_1588_CLOCK_IXP46X)	+= ptp_ixp46x.o
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 6fc04ffb22c2..0075ecdb21f4 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -33,10 +33,11 @@ 
 #include <linux/ptp_classify.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <mach/ixp46x_ts.h>
 #include <linux/soc/ixp4xx/npe.h>
 #include <linux/soc/ixp4xx/qmgr.h>
 
+#include "ixp46x_ts.h"
+
 #define DEBUG_DESC		0
 #define DEBUG_RX		0
 #define DEBUG_TX		0
diff --git a/drivers/ptp/ptp_ixp46x.c b/drivers/net/ethernet/xscale/ptp_ixp46x.c
similarity index 99%
rename from drivers/ptp/ptp_ixp46x.c
rename to drivers/net/ethernet/xscale/ptp_ixp46x.c
index 67028484e9a0..9ecc395239e9 100644
--- a/drivers/ptp/ptp_ixp46x.c
+++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c
@@ -15,7 +15,8 @@ 
 #include <linux/module.h>
 
 #include <linux/ptp_clock_kernel.h>
-#include <mach/ixp46x_ts.h>
+
+#include "ixp46x_ts.h"
 
 #define DRIVER		"ptp_ixp46x"
 #define N_EXT_TS	2
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h b/drivers/net/ethernet/xscale/ptp_ixp46x.h
similarity index 100%
rename from arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h
rename to drivers/net/ethernet/xscale/ptp_ixp46x.h
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 960961fb0d7c..0209e0ef082d 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -56,20 +56,6 @@  config PTP_1588_CLOCK_QORIQ
 	  To compile this driver as a module, choose M here: the module
 	  will be called ptp-qoriq.
 
-config PTP_1588_CLOCK_IXP46X
-	tristate "Intel IXP46x as PTP clock"
-	depends on IXP4XX_ETH
-	depends on PTP_1588_CLOCK
-	default y
-	help
-	  This driver adds support for using the IXP46X as a PTP
-	  clock. This clock is only useful if your PTP programs are
-	  getting hardware time stamps on the PTP Ethernet packets
-	  using the SO_TIMESTAMPING API.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ptp_ixp46x.
-
 comment "Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks."
 	depends on PHYLIB=n || NETWORK_PHY_TIMESTAMPING=n
 
diff --git a/drivers/ptp/Makefile b/drivers/ptp/Makefile
index 677d1d178a3e..8ac3513f61c9 100644
--- a/drivers/ptp/Makefile
+++ b/drivers/ptp/Makefile
@@ -6,7 +6,6 @@ 
 ptp-y					:= ptp_clock.o ptp_chardev.o ptp_sysfs.o
 obj-$(CONFIG_PTP_1588_CLOCK)		+= ptp.o
 obj-$(CONFIG_PTP_1588_CLOCK_DTE)	+= ptp_dte.o
-obj-$(CONFIG_PTP_1588_CLOCK_IXP46X)	+= ptp_ixp46x.o
 obj-$(CONFIG_PTP_1588_CLOCK_PCH)	+= ptp_pch.o
 obj-$(CONFIG_PTP_1588_CLOCK_KVM)	+= ptp_kvm.o
 obj-$(CONFIG_PTP_1588_CLOCK_QORIQ)	+= ptp-qoriq.o