@@ -48,7 +48,7 @@ example 1) LP5521
'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger
on channel 0.
-lp5521@32 {
+led-controller@32 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "national,lp5521";
@@ -56,20 +56,20 @@ lp5521@32 {
label = "lp5521_pri";
clock-mode = /bits/ 8 <2>;
- chan@0 {
+ led@0 {
reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
linux,default-trigger = "heartbeat";
};
- chan@1 {
+ led@1 {
reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan@2 {
+ led@2 {
reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
@@ -88,70 +88,70 @@ ASEL1 ASEL0 Address
VEN GND 34h
VEN VEN 35h
-lp5523@32 {
+led-controller@32 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = /bits/ 8 <1>;
- chan@0 {
+ led@0 {
reg = <0>;
chan-name = "d1";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@1 {
+ led@1 {
reg = <1>;
chan-name = "d2";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@2 {
+ led@2 {
reg = <2>;
chan-name = "d3";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@3 {
+ led@3 {
reg = <3>;
chan-name = "d4";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@4 {
+ led@4 {
reg = <4>;
chan-name = "d5";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@5 {
+ led@5 {
reg = <5>;
chan-name = "d6";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@6 {
+ led@6 {
reg = <6>;
chan-name = "d7";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@7 {
+ led@7 {
reg = <7>;
chan-name = "d8";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@8 {
+ led@8 {
reg = <8>;
chan-name = "d9";
led-cur = /bits/ 8 <0x14>;
@@ -162,35 +162,35 @@ lp5523@32 {
example 3) LP5562
4 channels are defined.
-lp5562@30 {
+led-controller@30 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,lp5562";
reg = <0x30>;
clock-mode = /bits/8 <2>;
- chan@0 {
+ led@0 {
reg = <0>;
chan-name = "R";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
- chan@1 {
+ led@1 {
reg = <1>;
chan-name = "G";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
- chan@2 {
+ led@2 {
reg = <2>;
chan-name = "B";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
- chan@3 {
+ led@3 {
reg = <3>;
chan-name = "W";
led-cur = /bits/ 8 <0x20>;
@@ -202,7 +202,7 @@ example 4) LP8501
9 channels are defined. The 'pwr-sel' is LP8501 specific property.
Others are same as LP5523.
-lp8501@32 {
+led-controller@32 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,lp8501";
@@ -210,63 +210,63 @@ lp8501@32 {
clock-mode = /bits/ 8 <2>;
pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
- chan@0 {
+ led@0 {
reg = <0>;
chan-name = "d1";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@1 {
+ led@1 {
reg = <1>;
chan-name = "d2";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@2 {
+ led@2 {
reg = <2>;
chan-name = "d3";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@3 {
+ led@3 {
reg = <3>;
chan-name = "d4";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@4 {
+ led@4 {
reg = <4>;
chan-name = "d5";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@5 {
+ led@5 {
reg = <5>;
chan-name = "d6";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@6 {
+ led@6 {
reg = <6>;
chan-name = "d7";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@7 {
+ led@7 {
reg = <7>;
chan-name = "d8";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
- chan@8 {
+ led@8 {
reg = <8>;
chan-name = "d9";
led-cur = /bits/ 8 <0x14>;
Update the LP55xx DT binding examples to the recommended node naming convention. There are no changes to the DT properties. Signed-off-by: Dan Murphy <dmurphy@ti.com> CC: Rob Herring <robh+dt@kernel.org> CC: Tony Lindgren <tony@atomide.com> CC: "Benoît Cousson" <bcousson@baylibre.com> CC: Linus Walleij <linus.walleij@linaro.org> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Pengutronix Kernel Team <kernel@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: NXP Linux Team <linux-imx@nxp.com> --- .../devicetree/bindings/leds/leds-lp55xx.txt | 58 +++++++++---------- 1 file changed, 29 insertions(+), 29 deletions(-) -- 2.22.0.214.g8dca754b1e