@@ -1450,9 +1450,9 @@ static void byt_init_irq_valid_mask(struct gpio_chip *chip,
*/
}
-static void byt_gpio_irq_init_hw(struct byt_gpio *vg)
+static int byt_gpio_irq_init_hw(struct gpio_chip *gc)
{
- struct gpio_chip *gc = &vg->chip;
+ struct byt_gpio *vg = gpiochip_get_data(gc);
struct device *dev = &vg->pdev->dev;
void __iomem *reg;
u32 base, value;
@@ -1504,6 +1504,7 @@ static void byt_gpio_irq_init_hw(struct byt_gpio *vg)
"GPIO interrupt error, pins misconfigured. INT_STAT%u: 0x%08x\n",
base / 32, value);
}
+ return 0;
}
static int byt_gpio_probe(struct byt_gpio *vg)
@@ -1528,6 +1529,27 @@ static int byt_gpio_probe(struct byt_gpio *vg)
if (!vg->saved_context)
return -ENOMEM;
#endif
+
+ /* set up interrupts */
+ irq_rc = platform_get_resource(vg->pdev, IORESOURCE_IRQ, 0);
+ if (irq_rc && irq_rc->start) {
+ struct gpio_irq_chip *girq;
+
+ girq = &gc->irq;
+ girq->chip = &byt_irqchip;
+ girq->init_hw = byt_gpio_irq_init_hw;
+ girq->parent_handler = byt_gpio_irq_handler;
+ girq->num_parents = 1;
+ girq->parents = devm_kcalloc(&vg->pdev->dev, 1,
+ sizeof(*girq->parents),
+ GFP_KERNEL);
+ if (!girq->parents)
+ return -ENOMEM;
+ girq->parents[0] = (unsigned int)irq_rc->start;
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_bad_irq;
+ }
+
ret = devm_gpiochip_add_data(&vg->pdev->dev, gc, vg);
if (ret) {
dev_err(&vg->pdev->dev, "failed adding byt-gpio chip\n");
@@ -1541,22 +1563,6 @@ static int byt_gpio_probe(struct byt_gpio *vg)
return ret;
}
- /* set up interrupts */
- irq_rc = platform_get_resource(vg->pdev, IORESOURCE_IRQ, 0);
- if (irq_rc && irq_rc->start) {
- byt_gpio_irq_init_hw(vg);
- ret = gpiochip_irqchip_add(gc, &byt_irqchip, 0,
- handle_bad_irq, IRQ_TYPE_NONE);
- if (ret) {
- dev_err(&vg->pdev->dev, "failed to add irqchip\n");
- return ret;
- }
-
- gpiochip_set_chained_irqchip(gc, &byt_irqchip,
- (unsigned)irq_rc->start,
- byt_gpio_irq_handler);
- }
-
return ret;
}
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Use the new .init_hw() callback to initialize IRQ hardware. ChangeLog v1->v2: - Rebase on v5.4-rc1 --- drivers/pinctrl/intel/pinctrl-baytrail.c | 42 ++++++++++++++---------- 1 file changed, 24 insertions(+), 18 deletions(-) -- 2.21.0