@@ -3,12 +3,238 @@ config PLAT_ORION
select CLKSRC_MMIO
select COMMON_CLK
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select IRQ_DOMAIN
+ select MVEBU_MBUS
config PLAT_ORION_LEGACY
bool
select PLAT_ORION
-source "arch/arm/mach-orion/Kconfig.dove"
-source "arch/arm/mach-orion/Kconfig.mv78xx0"
-source "arch/arm/mach-orion/Kconfig.orion5x"
+menuconfig ARCH_DOVE
+ bool "Marvell Dove" if ARCH_MULTI_V7
+ select CPU_PJ4
+ select PINCTRL
+ select PINCTRL_DOVE
+ select PLAT_ORION_LEGACY
+ select PM_GENERIC_DOMAINS if PM
+ help
+ Support for the Marvell Dove SoC 88AP510
+
+if ARCH_DOVE
+
+config MACH_DOVE_DB
+ bool "Marvell DB-MV88AP510 Development Board"
+ select I2C_BOARDINFO if I2C
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DB-MV88AP510 Development Board.
+
+config MACH_CM_A510
+ bool "CompuLab CM-A510 Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ CompuLab CM-A510 Board.
+
+endif
+
+menuconfig ARCH_MV78XX0
+ bool "Marvell MV78xx0"
+ depends on ARCH_MULTI_V5
+ select CPU_FEROCEON
+ select FORCE_PCI
+ select PLAT_ORION_LEGACY
+ help
+ Support for the following Marvell MV78xx0 series SoCs:
+ MV781x0, MV782x0.
+
+if ARCH_MV78XX0
+
+config MACH_DB78X00_BP
+ bool "Marvell DB-78x00-BP Development Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DB-78x00-BP Development Board.
+
+config MACH_RD78X00_MASA
+ bool "Marvell RD-78x00-mASA Reference Design"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell RD-78x00-mASA Reference Design.
+
+config MACH_TERASTATION_WXL
+ bool "Buffalo WLX (Terastation Duo) NAS"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo WXL Nas.
+
+endif
+
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_ORION5X
+ bool "Marvell Orion"
+ depends on MMU && ARCH_MULTI_V5
+ select CPU_FEROCEON
+ select GENERIC_CLOCKEVENTS
+ select FORCE_PCI
+ select PHYLIB if NETDEVICES
+ select PLAT_ORION_LEGACY
+ help
+ Support for the following Marvell Orion 5x series SoCs:
+ Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+ Orion-2 (5281), Orion-1-90 (6183).
+
+if ARCH_ORION5X
+
+config ARCH_ORION5X_DT
+ bool "Marvell Orion5x Flattened Device Tree"
+ select USE_OF
+ select ORION_CLK
+ select ORION_IRQCHIP
+ select ORION_TIMER
+ select PINCTRL
+ select PINCTRL_ORION
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion5x using flattened device tree.
+
+config MACH_DB88F5281
+ bool "Marvell Orion-2 Development Board"
+ select I2C_BOARDINFO if I2C
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-2 (88F5281) Development Board
+
+config MACH_RD88F5182
+ bool "Marvell Orion-NAS Reference Design"
+ select I2C_BOARDINFO if I2C
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-NAS (88F5182) RD2
+
+config MACH_RD88F5182_DT
+ bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
+ select ARCH_ORION5X_DT
+ select I2C_BOARDINFO if I2C
+ help
+ Say 'Y' here if you want your kernel to support the Marvell
+ Orion-NAS (88F5182) RD2, Flattened Device Tree.
+
+config MACH_KUROBOX_PRO
+ bool "KuroBox Pro"
+ select I2C_BOARDINFO if I2C
+ help
+ Say 'Y' here if you want your kernel to support the
+ KuroBox Pro platform.
+
+config MACH_DNS323
+ bool "D-Link DNS-323"
+ select I2C_BOARDINFO if I2C
+ help
+ Say 'Y' here if you want your kernel to support the
+ D-Link DNS-323 platform.
+
+config MACH_TS209
+ bool "QNAP TS-109/TS-209"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-109/TS-209 platform.
+
+config MACH_TERASTATION_PRO2
+ bool "Buffalo Terastation Pro II/Live"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Terastation Pro II/Live platform.
+
+config MACH_LINKSTATION_PRO
+ bool "Buffalo Linkstation Pro/Live"
+ select I2C_BOARDINFO if I2C
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation Pro/Live platform. Both v1 and
+ v2 devices are supported.
+
+config MACH_LINKSTATION_MINI
+ bool "Buffalo Linkstation Mini (Flattened Device Tree)"
+ select ARCH_ORION5X_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation Mini (LS-WSGL) platform.
+
+config MACH_LINKSTATION_LS_HGL
+ bool "Buffalo Linkstation LS-HGL"
+ select I2C_BOARDINFO if I2C
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation LS-HGL platform.
+
+config MACH_TS409
+ bool "QNAP TS-409"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-409 platform.
+
+config MACH_WRT350N_V2
+ bool "Linksys WRT350N v2"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Linksys WRT350N v2 platform.
+
+config MACH_TS78XX
+ bool "Technologic Systems TS-78xx"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Technologic Systems TS-78xx platform.
+
+config MACH_MV2120
+ bool "HP Media Vault mv2120"
+ help
+ Say 'Y' here if you want your kernel to support the
+ HP Media Vault mv2120 or mv5100.
+
+config MACH_D2NET_DT
+ bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)"
+ select ARCH_ORION5X_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie d2 Network NAS.
+
+config MACH_NET2BIG
+ bool "LaCie 2Big Network"
+ select I2C_BOARDINFO if I2C
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie 2Big Network NAS.
+
+config MACH_MSS2_DT
+ bool "Maxtor Shared Storage II (Flattened Device Tree)"
+ select ARCH_ORION5X_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Maxtor Shared Storage II platform.
+
+config MACH_WNR854T
+ bool "Netgear WNR854T"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Netgear WNR854T platform.
+
+config MACH_RD88F5181L_GE
+ bool "Marvell Orion-VoIP GE Reference Design"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-VoIP GE (88F5181L) RD.
+
+config MACH_RD88F5181L_FXO
+ bool "Marvell Orion-VoIP FXO Reference Design"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-VoIP FXO (88F5181L) RD.
+
+config MACH_RD88F6183AP_GE
+ bool "Marvell Orion-1-90 AP GE Reference Design"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-1-90 (88F6183) AP GE RD.
+
+endif
deleted file mode 100644
@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_DOVE
- bool "Marvell Dove" if ARCH_MULTI_V7
- select CPU_PJ4
- select GPIOLIB
- select MVEBU_MBUS
- select PINCTRL
- select PINCTRL_DOVE
- select PLAT_ORION_LEGACY
- select PM_GENERIC_DOMAINS if PM
- help
- Support for the Marvell Dove SoC 88AP510
-
-if ARCH_DOVE
-
-config DOVE_LEGACY
- bool
-
-config MACH_DOVE_DB
- bool "Marvell DB-MV88AP510 Development Board"
- select DOVE_LEGACY
- select I2C_BOARDINFO if I2C
- help
- Say 'Y' here if you want your kernel to support the
- Marvell DB-MV88AP510 Development Board.
-
-config MACH_CM_A510
- bool "CompuLab CM-A510 Board"
- select DOVE_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- CompuLab CM-A510 Board.
-
-endif
deleted file mode 100644
@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_MV78XX0
- bool "Marvell MV78xx0"
- depends on ARCH_MULTI_V5
- select CPU_FEROCEON
- select GPIOLIB
- select MVEBU_MBUS
- select FORCE_PCI
- select PLAT_ORION_LEGACY
- help
- Support for the following Marvell MV78xx0 series SoCs:
- MV781x0, MV782x0.
-
-if ARCH_MV78XX0
-
-config MACH_DB78X00_BP
- bool "Marvell DB-78x00-BP Development Board"
- help
- Say 'Y' here if you want your kernel to support the
- Marvell DB-78x00-BP Development Board.
-
-config MACH_RD78X00_MASA
- bool "Marvell RD-78x00-mASA Reference Design"
- help
- Say 'Y' here if you want your kernel to support the
- Marvell RD-78x00-mASA Reference Design.
-
-config MACH_TERASTATION_WXL
- bool "Buffalo WLX (Terastation Duo) NAS"
- help
- Say 'Y' here if you want your kernel to support the
- Buffalo WXL Nas.
-
-endif
deleted file mode 100644
@@ -1,170 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_ORION5X
- bool "Marvell Orion"
- depends on MMU && ARCH_MULTI_V5
- select CPU_FEROCEON
- select GENERIC_CLOCKEVENTS
- select GPIOLIB
- select MVEBU_MBUS
- select FORCE_PCI
- select PHYLIB if NETDEVICES
- select PLAT_ORION_LEGACY
- help
- Support for the following Marvell Orion 5x series SoCs:
- Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
- Orion-2 (5281), Orion-1-90 (6183).
-
-if ARCH_ORION5X
-
-config ARCH_ORION5X_DT
- bool "Marvell Orion5x Flattened Device Tree"
- select USE_OF
- select ORION_CLK
- select ORION_IRQCHIP
- select ORION_TIMER
- select PINCTRL
- select PINCTRL_ORION
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Orion5x using flattened device tree.
-
-config MACH_DB88F5281
- bool "Marvell Orion-2 Development Board"
- select I2C_BOARDINFO if I2C
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Orion-2 (88F5281) Development Board
-
-config MACH_RD88F5182
- bool "Marvell Orion-NAS Reference Design"
- select I2C_BOARDINFO if I2C
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Orion-NAS (88F5182) RD2
-
-config MACH_RD88F5182_DT
- bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
- select ARCH_ORION5X_DT
- select I2C_BOARDINFO if I2C
- help
- Say 'Y' here if you want your kernel to support the Marvell
- Orion-NAS (88F5182) RD2, Flattened Device Tree.
-
-config MACH_KUROBOX_PRO
- bool "KuroBox Pro"
- select I2C_BOARDINFO if I2C
- help
- Say 'Y' here if you want your kernel to support the
- KuroBox Pro platform.
-
-config MACH_DNS323
- bool "D-Link DNS-323"
- select I2C_BOARDINFO if I2C
- help
- Say 'Y' here if you want your kernel to support the
- D-Link DNS-323 platform.
-
-config MACH_TS209
- bool "QNAP TS-109/TS-209"
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-109/TS-209 platform.
-
-config MACH_TERASTATION_PRO2
- bool "Buffalo Terastation Pro II/Live"
- help
- Say 'Y' here if you want your kernel to support the
- Buffalo Terastation Pro II/Live platform.
-
-config MACH_LINKSTATION_PRO
- bool "Buffalo Linkstation Pro/Live"
- select I2C_BOARDINFO if I2C
- help
- Say 'Y' here if you want your kernel to support the
- Buffalo Linkstation Pro/Live platform. Both v1 and
- v2 devices are supported.
-
-config MACH_LINKSTATION_MINI
- bool "Buffalo Linkstation Mini (Flattened Device Tree)"
- select ARCH_ORION5X_DT
- help
- Say 'Y' here if you want your kernel to support the
- Buffalo Linkstation Mini (LS-WSGL) platform.
-
-config MACH_LINKSTATION_LS_HGL
- bool "Buffalo Linkstation LS-HGL"
- select I2C_BOARDINFO if I2C
- help
- Say 'Y' here if you want your kernel to support the
- Buffalo Linkstation LS-HGL platform.
-
-config MACH_TS409
- bool "QNAP TS-409"
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-409 platform.
-
-config MACH_WRT350N_V2
- bool "Linksys WRT350N v2"
- help
- Say 'Y' here if you want your kernel to support the
- Linksys WRT350N v2 platform.
-
-config MACH_TS78XX
- bool "Technologic Systems TS-78xx"
- help
- Say 'Y' here if you want your kernel to support the
- Technologic Systems TS-78xx platform.
-
-config MACH_MV2120
- bool "HP Media Vault mv2120"
- help
- Say 'Y' here if you want your kernel to support the
- HP Media Vault mv2120 or mv5100.
-
-config MACH_D2NET_DT
- bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)"
- select ARCH_ORION5X_DT
- help
- Say 'Y' here if you want your kernel to support the
- LaCie d2 Network NAS.
-
-config MACH_NET2BIG
- bool "LaCie 2Big Network"
- select I2C_BOARDINFO if I2C
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 2Big Network NAS.
-
-config MACH_MSS2_DT
- bool "Maxtor Shared Storage II (Flattened Device Tree)"
- select ARCH_ORION5X_DT
- help
- Say 'Y' here if you want your kernel to support the
- Maxtor Shared Storage II platform.
-
-config MACH_WNR854T
- bool "Netgear WNR854T"
- help
- Say 'Y' here if you want your kernel to support the
- Netgear WNR854T platform.
-
-config MACH_RD88F5181L_GE
- bool "Marvell Orion-VoIP GE Reference Design"
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Orion-VoIP GE (88F5181L) RD.
-
-config MACH_RD88F5181L_FXO
- bool "Marvell Orion-VoIP FXO Reference Design"
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Orion-VoIP FXO (88F5181L) RD.
-
-config MACH_RD88F6183AP_GE
- bool "Marvell Orion-1-90 AP GE Reference Design"
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Orion-1-90 (88F6183) AP GE RD.
-
-endif
@@ -1,21 +1,45 @@
# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-orion-gpio-$(CONFIG_GPIOLIB) += gpio.o
-obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o
-obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y)
+orion-gpio-$(CONFIG_GPIOLIB) += gpio.o
+obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o time.o common.o mpp.o
+obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y)
-ifdef CONFIG_ARCH_DOVE
-include $(src)/Makefile.dove
+ifdef CONFIG_PCI
+obj-$(CONFIG_PLAT_ORION_LEGACY) += pcie.o
+obj-$(CONFIG_ARCH_DOVE) += dove-pcie.o
+obj-$(CONFIG_ARCH_MV78XX0) += mv78xx0-pcie.o
+obj-$(CONFIG_ARCH_ORION5X) += orion5x-pci.o
endif
-ifdef CONFIG_ARCH_MV78XX0
-include $(src)/Makefile.mv78xx0
-endif
+obj-$(CONFIG_ARCH_DOVE) += dove-common.o dove-irq.o dove-mpp.o
+obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
+obj-$(CONFIG_MACH_CM_A510) += cm-a510.o
-ifdef CONFIG_ARCH_ORION5X
-include $(src)/Makefile.orion5x
-endif
+obj-$(CONFIG_ARCH_MV78XX0) += mv78xx0-common.o mv78xx0-mpp.o mv78xx0-irq.o
+obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
+obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
+obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
+
+obj-$(CONFIG_ARCH_ORION5X) += orion5x.o orion5x-irq.o orion5x-mpp.o
+obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
+obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
+obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
+obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
+obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o
+obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o
+obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
+obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o
+obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
+obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
+
+obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o
+obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o
+obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o
+obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o
deleted file mode 100644
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += dove-common.o
-obj-$(CONFIG_DOVE_LEGACY) += dove-irq.o dove-mpp.o
-obj-$(CONFIG_PCI) += dove-pcie.o
-obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
-obj-$(CONFIG_MACH_CM_A510) += cm-a510.o
deleted file mode 100644
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += mv78xx0-common.o mv78xx0-mpp.o mv78xx0-irq.o mv78xx0-pcie.o
-obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
-obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
-obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
deleted file mode 100644
@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += orion5x.o orion5x-pci.o orion5x-irq.o orion5x-mpp.o
-obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
-obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
-obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
-obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
-obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
-obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
-obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o
-obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o
-obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
-obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o
-obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
-obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
-
-obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o
-obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o
-obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o
-obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o
There is no reason to keep these separate, so move them into the generic files. Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/mach-orion/Kconfig | 232 ++++++++++++++++++++++++++- arch/arm/mach-orion/Kconfig.dove | 34 ---- arch/arm/mach-orion/Kconfig.mv78xx0 | 34 ---- arch/arm/mach-orion/Kconfig.orion5x | 170 -------------------- arch/arm/mach-orion/Makefile | 54 +++++-- arch/arm/mach-orion/Makefile.dove | 6 - arch/arm/mach-orion/Makefile.mv78xx0 | 5 - arch/arm/mach-orion/Makefile.orion5x | 24 --- 8 files changed, 268 insertions(+), 291 deletions(-) delete mode 100644 arch/arm/mach-orion/Kconfig.dove delete mode 100644 arch/arm/mach-orion/Kconfig.mv78xx0 delete mode 100644 arch/arm/mach-orion/Kconfig.orion5x delete mode 100644 arch/arm/mach-orion/Makefile.dove delete mode 100644 arch/arm/mach-orion/Makefile.mv78xx0 delete mode 100644 arch/arm/mach-orion/Makefile.orion5x -- 2.20.0