diff mbox series

[2/3] pinctrl: nomadik: Pass irqchip when adding gpiochip

Message ID 20191014111154.9731-2-linus.walleij@linaro.org
State Accepted
Commit 2da7852e54edc917ef27077fb8ade85f6a5e6394
Headers show
Series [1/3] pinctrl: nomadik: Drop support for latent IRQ | expand

Commit Message

Linus Walleij Oct. 14, 2019, 11:11 a.m. UTC 
We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 drivers/pinctrl/nomadik/pinctrl-nomadik.c | 39 +++++++++--------------
 1 file changed, 15 insertions(+), 24 deletions(-)

-- 
2.21.0
diff mbox series

Patch

diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index dc81de15b85e..b7992da8b569 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -248,7 +248,6 @@  struct nmk_gpio_chip {
 	void __iomem *addr;
 	struct clk *clk;
 	unsigned int bank;
-	unsigned int parent_irq;
 	void (*set_ioforce)(bool enable);
 	spinlock_t lock;
 	bool sleepmode;
@@ -1092,6 +1091,7 @@  static int nmk_gpio_probe(struct platform_device *dev)
 	struct device_node *np = dev->dev.of_node;
 	struct nmk_gpio_chip *nmk_chip;
 	struct gpio_chip *chip;
+	struct gpio_irq_chip *girq;
 	struct irq_chip *irqchip;
 	bool supports_sleepmode;
 	int irq;
@@ -1117,7 +1117,6 @@  static int nmk_gpio_probe(struct platform_device *dev)
 	 * The virt address in nmk_chip->addr is in the nomadik register space,
 	 * so we can simply convert the resource address, without remapping
 	 */
-	nmk_chip->parent_irq = irq;
 	nmk_chip->sleepmode = supports_sleepmode;
 	spin_lock_init(&nmk_chip->lock);
 
@@ -1147,6 +1146,19 @@  static int nmk_gpio_probe(struct platform_device *dev)
 				  chip->base,
 				  chip->base + chip->ngpio - 1);
 
+	girq = &chip->irq;
+	girq->chip = irqchip;
+	girq->parent_handler = nmk_gpio_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&dev->dev, 1,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = irq;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+
 	clk_enable(nmk_chip->clk);
 	nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI);
 	clk_disable(nmk_chip->clk);
@@ -1158,28 +1170,7 @@  static int nmk_gpio_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, nmk_chip);
 
-	/*
-	 * Let the generic code handle this edge IRQ, the the chained
-	 * handler will perform the actual work of handling the parent
-	 * interrupt.
-	 */
-	ret = gpiochip_irqchip_add(chip,
-				   irqchip,
-				   0,
-				   handle_edge_irq,
-				   IRQ_TYPE_NONE);
-	if (ret) {
-		dev_err(&dev->dev, "could not add irqchip\n");
-		gpiochip_remove(&nmk_chip->chip);
-		return -ENODEV;
-	}
-	/* Then register the chain on the parent IRQ */
-	gpiochip_set_chained_irqchip(chip,
-				     irqchip,
-				     nmk_chip->parent_irq,
-				     nmk_gpio_irq_handler);
-
-	dev_info(&dev->dev, "at address %p\n", nmk_chip->addr);
+	dev_info(&dev->dev, "chip registered\n");
 
 	return 0;
 }