diff mbox series

[v11,11/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes

Message ID 20191008204800.19870-12-dmurphy@ti.com
State Superseded
Headers show
Series Multicolor Framework v11 | expand

Commit Message

Dan Murphy Oct. 8, 2019, 8:47 p.m. UTC 
Add the reg property to each channel node.  This update is
to accomodate the multicolor framework.  In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

CC: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

-- 
2.22.0.214.g8dca754b1e

Comments

Linus Walleij Oct. 16, 2019, 11:24 a.m. UTC | #1 
On Tue, Oct 8, 2019 at 10:48 PM Dan Murphy <dmurphy@ti.com> wrote:

> Add the reg property to each channel node.  This update is

> to accomodate the multicolor framework.  In addition to the

> accomodation this allows the LEDs to be placed on any channel

> and allow designs to skip channels as opposed to requiring

> sequential order.

>

> Signed-off-by: Dan Murphy <dmurphy@ti.com>

> CC: Linus Walleij <linus.walleij@linaro.org>


Patch applied to the Ux500 tree.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 4f6acbd8c040..8a873da102d3 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -56,16 +56,21 @@ 
 				reg = <0x33>;
 				label = "lp5521_pri";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					linux,default-trigger = "heartbeat";
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
@@ -75,15 +80,20 @@ 
 				reg = <0x34>;
 				label = "lp5521_sec";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};