diff mbox series

[RFC,01/21] dt-bindings: PCI: Endpoint: Add DT bindings for PCI EPF Bus

Message ID 20190926112933.8922-2-kishon@ti.com
State New
Headers show
Series Implement NTB Controller using multiple PCI | expand

Commit Message

Kishon Vijay Abraham I Sept. 26, 2019, 11:29 a.m. UTC 
Add device tree bindings for PCI endpoint function bus to which
endpoint function devices should be attached.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

---
 .../bindings/pci/endpoint/pci-epf-bus.txt     | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt

-- 
2.17.1
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt b/Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt
new file mode 100644
index 000000000000..16727ddf01f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt
@@ -0,0 +1,27 @@ 
+PCI Endpoint Function Bus
+
+This describes the bindings for endpoint function bus to which endpoint
+function devices should be attached.
+
+Required Properties:
+ - compatible: Should be "pci-epf-bus"
+
+One or more subnodes representing PCIe endpoint function device exposed
+to the remote host.
+
+Example:
+Following is an example of NTB device exposed to the remote host.
+
+epf_bus {
+	compatible = "pci-epf-bus";
+
+	ntb {
+		compatible = "pci-epf-ntb";
+		epcs = <&pcie0_ep>, <&pcie1_ep>;
+		epc-names = "primary", "secondary";
+		vendor-id = /bits/ 16 <0x104c>;
+		device-id = /bits/ 16 <0xb00d>;
+		num-mws = <4>;
+		mws-size = <0x100000>, <0x100000>, <0x100000>, <0x100000>;
+	};
+};