@@ -17,8 +17,10 @@
#define ASPEED_SCU(obj) OBJECT_CHECK(AspeedSCUState, (obj), TYPE_ASPEED_SCU)
#define TYPE_ASPEED_2400_SCU TYPE_ASPEED_SCU "-ast2400"
#define TYPE_ASPEED_2500_SCU TYPE_ASPEED_SCU "-ast2500"
+#define TYPE_ASPEED_2600_SCU TYPE_ASPEED_SCU "-ast2600"
#define ASPEED_SCU_NR_REGS (0x1A8 >> 2)
+#define ASPEED_AST2600_SCU_NR_REGS (0xE20 >> 2)
typedef struct AspeedSCUState {
/*< private >*/
@@ -27,7 +29,7 @@ typedef struct AspeedSCUState {
/*< public >*/
MemoryRegion iomem;
- uint32_t regs[ASPEED_SCU_NR_REGS];
+ uint32_t regs[ASPEED_AST2600_SCU_NR_REGS];
uint32_t silicon_rev;
uint32_t hw_strap1;
uint32_t hw_strap2;
@@ -38,6 +40,7 @@ typedef struct AspeedSCUState {
#define AST2400_A1_SILICON_REV 0x02010303U
#define AST2500_A0_SILICON_REV 0x04000303U
#define AST2500_A1_SILICON_REV 0x04010303U
+#define AST2600_A0_SILICON_REV 0x05000303U
#define ASPEED_IS_AST2500(si_rev) ((((si_rev) >> 24) & 0xff) == 0x04)
@@ -54,6 +57,8 @@ typedef struct AspeedSCUClass {
const uint32_t *resets;
uint32_t (*calc_hpll)(AspeedSCUState *s, uint32_t hpll_reg);
uint32_t apb_divider;
+ uint32_t nr_regs;
+ const MemoryRegionOps *ops;
} AspeedSCUClass;
#define ASPEED_SCU_PROT_KEY 0x1688A8A8
@@ -88,6 +88,35 @@
#define BMC_REV TO_REG(0x19C)
#define BMC_DEV_ID TO_REG(0x1A4)
+#define AST2600_PROT_KEY TO_REG(0x00)
+#define AST2600_SILICON_REV TO_REG(0x04)
+#define AST2600_SILICON_REV2 TO_REG(0x14)
+#define AST2600_SYS_RST_CTRL TO_REG(0x40)
+#define AST2600_SYS_RST_CTRL_CLR TO_REG(0x44)
+#define AST2600_SYS_RST_CTRL2 TO_REG(0x50)
+#define AST2600_SYS_RST_CTRL2_CLR TO_REG(0x54)
+#define AST2600_CLK_STOP_CTRL TO_REG(0x80)
+#define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84)
+#define AST2600_CLK_STOP_CTRL2 TO_REG(0x90)
+#define AST2600_CLK_STOP_CTR2L_CLR TO_REG(0x94)
+#define AST2600_HPLL_PARAM TO_REG(0x200)
+#define AST2600_HPLL_EXT TO_REG(0x204)
+#define AST2600_MPLL_EXT TO_REG(0x224)
+#define AST2600_EPLL_EXT TO_REG(0x244)
+#define AST2600_CLK_SEL TO_REG(0x300)
+#define AST2600_CLK_SEL2 TO_REG(0x304)
+#define AST2600_CLK_SEL3 TO_REG(0x310)
+#define AST2600_HW_STRAP1 TO_REG(0x500)
+#define AST2600_HW_STRAP1_CLR TO_REG(0x504)
+#define AST2600_HW_STRAP1_PROT TO_REG(0x508)
+#define AST2600_HW_STRAP2 TO_REG(0x510)
+#define AST2600_HW_STRAP2_CLR TO_REG(0x514)
+#define AST2600_HW_STRAP2_PROT TO_REG(0x518)
+#define AST2600_RNG_CTRL TO_REG(0x524)
+#define AST2600_RNG_DATA TO_REG(0x540)
+
+#define AST2600_CLK TO_REG(0x40)
+
#define SCU_IO_REGION_SIZE 0x1000
static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
@@ -178,7 +207,7 @@ static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
AspeedSCUState *s = ASPEED_SCU(opaque);
int reg = TO_REG(offset);
- if (reg >= ARRAY_SIZE(s->regs)) {
+ if (reg >= ASPEED_SCU_NR_REGS) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
@@ -208,7 +237,7 @@ static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data,
AspeedSCUState *s = ASPEED_SCU(opaque);
int reg = TO_REG(offset);
- if (reg >= ARRAY_SIZE(s->regs)) {
+ if (reg >= ASPEED_SCU_NR_REGS) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
@@ -346,7 +375,7 @@ static void aspeed_scu_reset(DeviceState *dev)
AspeedSCUState *s = ASPEED_SCU(dev);
AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
- memcpy(s->regs, asc->resets, sizeof(s->regs));
+ memcpy(s->regs, asc->resets, asc->nr_regs * 4);
s->regs[SILICON_REV] = s->silicon_rev;
s->regs[HW_STRAP1] = s->hw_strap1;
s->regs[HW_STRAP2] = s->hw_strap2;
@@ -358,6 +387,7 @@ static uint32_t aspeed_silicon_revs[] = {
AST2400_A1_SILICON_REV,
AST2500_A0_SILICON_REV,
AST2500_A1_SILICON_REV,
+ AST2600_A0_SILICON_REV,
};
bool is_supported_silicon_rev(uint32_t silicon_rev)
@@ -377,6 +407,7 @@ static void aspeed_scu_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedSCUState *s = ASPEED_SCU(dev);
+ AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
if (!is_supported_silicon_rev(s->silicon_rev)) {
error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
@@ -384,7 +415,7 @@ static void aspeed_scu_realize(DeviceState *dev, Error **errp)
return;
}
- memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_scu_ops, s,
+ memory_region_init_io(&s->iomem, OBJECT(s), asc->ops, s,
TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE);
sysbus_init_mmio(sbd, &s->iomem);
@@ -392,10 +423,10 @@ static void aspeed_scu_realize(DeviceState *dev, Error **errp)
static const VMStateDescription vmstate_aspeed_scu = {
.name = "aspeed.scu",
- .version_id = 1,
- .minimum_version_id = 1,
+ .version_id = 2,
+ .minimum_version_id = 2,
.fields = (VMStateField[]) {
- VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_SCU_NR_REGS),
+ VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_AST2600_SCU_NR_REGS),
VMSTATE_END_OF_LIST()
}
};
@@ -436,6 +467,8 @@ static void aspeed_2400_scu_class_init(ObjectClass *klass, void *data)
asc->resets = ast2400_a0_resets;
asc->calc_hpll = aspeed_2400_scu_calc_hpll;
asc->apb_divider = 2;
+ asc->nr_regs = ASPEED_SCU_NR_REGS;
+ asc->ops = &aspeed_scu_ops;
}
static const TypeInfo aspeed_2400_scu_info = {
@@ -454,6 +487,8 @@ static void aspeed_2500_scu_class_init(ObjectClass *klass, void *data)
asc->resets = ast2500_a1_resets;
asc->calc_hpll = aspeed_2500_scu_calc_hpll;
asc->apb_divider = 4;
+ asc->nr_regs = ASPEED_SCU_NR_REGS;
+ asc->ops = &aspeed_scu_ops;
}
static const TypeInfo aspeed_2500_scu_info = {
@@ -463,11 +498,154 @@ static const TypeInfo aspeed_2500_scu_info = {
.class_init = aspeed_2500_scu_class_init,
};
+static uint64_t aspeed_ast2600_scu_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ AspeedSCUState *s = ASPEED_SCU(opaque);
+ int reg = TO_REG(offset);
+
+ if (reg >= ASPEED_AST2600_SCU_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+ __func__, offset);
+ return 0;
+ }
+
+ switch (reg) {
+ case AST2600_HPLL_EXT:
+ case AST2600_EPLL_EXT:
+ case AST2600_MPLL_EXT:
+ /* PLLs are always "locked" */
+ return s->regs[reg] | BIT(31);
+ case AST2600_RNG_DATA:
+ /*
+ * On hardware, RNG_DATA works regardless of the state of the
+ * enable bit in RNG_CTRL
+ *
+ * TODO: Check this is true for ast2600
+ */
+ s->regs[AST2600_RNG_DATA] = aspeed_scu_get_random();
+ break;
+ }
+
+ return s->regs[reg];
+}
+
+static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t data,
+ unsigned size)
+{
+ AspeedSCUState *s = ASPEED_SCU(opaque);
+ int reg = TO_REG(offset);
+
+ if (reg >= ASPEED_AST2600_SCU_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+ __func__, offset);
+ return;
+ }
+
+ if (reg > PROT_KEY && !s->regs[PROT_KEY]) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
+ }
+
+ trace_aspeed_scu_write(offset, size, data);
+
+ switch (reg) {
+ case AST2600_PROT_KEY:
+ s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0;
+ return;
+ case AST2600_HW_STRAP1:
+ case AST2600_HW_STRAP2:
+ if (s->regs[reg + 2]) {
+ return;
+ }
+ /* fall through */
+ case AST2600_SYS_RST_CTRL:
+ case AST2600_SYS_RST_CTRL2:
+ /* W1S (Write 1 to set) registers */
+ s->regs[reg] |= data;
+ return;
+ case AST2600_SYS_RST_CTRL_CLR:
+ case AST2600_SYS_RST_CTRL2_CLR:
+ case AST2600_HW_STRAP1_CLR:
+ case AST2600_HW_STRAP2_CLR:
+ /* W1C (Write 1 to clear) registers */
+ s->regs[reg] &= ~data;
+ return;
+
+ case AST2600_RNG_DATA:
+ case AST2600_SILICON_REV:
+ case AST2600_SILICON_REV2:
+ /* Add read only registers here */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
+ __func__, offset);
+ return;
+ }
+
+ s->regs[reg] = data;
+}
+
+static const MemoryRegionOps aspeed_ast2600_scu_ops = {
+ .read = aspeed_ast2600_scu_read,
+ .write = aspeed_ast2600_scu_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 4,
+ .valid.unaligned = false,
+};
+
+static const uint32_t ast2600_a0_resets[ASPEED_AST2600_SCU_NR_REGS] = {
+ [AST2600_SILICON_REV] = AST2600_SILICON_REV,
+ [AST2600_SILICON_REV2] = AST2600_SILICON_REV,
+ [AST2600_SYS_RST_CTRL] = 0xF7CFFEDC | 0x100,
+ [AST2600_SYS_RST_CTRL2] = 0xFFFFFFFC,
+ [AST2600_CLK_STOP_CTRL] = 0xEFF43E8B,
+ [AST2600_CLK_STOP_CTRL2] = 0xFFF0FFF0,
+ [AST2600_HPLL_PARAM] = 0x1000405F,
+};
+
+static void aspeed_ast2600_scu_reset(DeviceState *dev)
+{
+ AspeedSCUState *s = ASPEED_SCU(dev);
+ AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
+
+ memcpy(s->regs, asc->resets, asc->nr_regs * 4);
+
+ s->regs[AST2600_SILICON_REV] = s->silicon_rev;
+ s->regs[AST2600_SILICON_REV2] = s->silicon_rev;
+ s->regs[AST2600_HW_STRAP1] = s->hw_strap1;
+ s->regs[AST2600_HW_STRAP2] = s->hw_strap2;
+ s->regs[PROT_KEY] = s->hw_prot_key;
+}
+
+static void aspeed_2600_scu_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass);
+
+ dc->desc = "ASPEED 2600 System Control Unit";
+ dc->reset = aspeed_ast2600_scu_reset;
+ asc->resets = ast2600_a0_resets;
+ asc->calc_hpll = aspeed_2500_scu_calc_hpll; /* No change since AST2500 */
+ asc->apb_divider = 4;
+ asc->nr_regs = ASPEED_AST2600_SCU_NR_REGS;
+ asc->ops = &aspeed_ast2600_scu_ops;
+}
+
+static const TypeInfo aspeed_2600_scu_info = {
+ .name = TYPE_ASPEED_2600_SCU,
+ .parent = TYPE_ASPEED_SCU,
+ .instance_size = sizeof(AspeedSCUState),
+ .class_init = aspeed_2600_scu_class_init,
+};
+
static void aspeed_scu_register_types(void)
{
type_register_static(&aspeed_scu_info);
type_register_static(&aspeed_2400_scu_info);
type_register_static(&aspeed_2500_scu_info);
+ type_register_static(&aspeed_2600_scu_info);
}
type_init(aspeed_scu_register_types);