diff mbox series

[v4,09/15] arm64: dts: msm8996: thermal: Add interrupt support

Message ID f627e66c455f52b5662bef6526d7c72869808401.1569015835.git.amit.kucheria@linaro.org
State New
Headers show
Series None | expand

Commit Message

Amit Kucheria Sept. 20, 2019, 9:52 p.m. UTC 
Register upper-lower interrupts for each of the two tsens controllers.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 60 ++++++++++++++-------------
 1 file changed, 32 insertions(+), 28 deletions(-)

-- 
2.17.1

Comments

Amit Kucheria Sept. 20, 2019, 10:07 p.m. UTC | #1 
On Fri, Sep 20, 2019 at 3:02 PM Stephen Boyd <swboyd@chromium.org> wrote:
>

> Quoting Amit Kucheria (2019-09-20 14:52:24)

> > Register upper-lower interrupts for each of the two tsens controllers.

> >

> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

> > ---

> >  arch/arm64/boot/dts/qcom/msm8996.dtsi | 60 ++++++++++++++-------------

> >  1 file changed, 32 insertions(+), 28 deletions(-)

> >

> > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi

> > index 96c0a481f454..bb763b362c16 100644

> > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi

> > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi

> > @@ -175,8 +175,8 @@

> >

> >         thermal-zones {

> >                 cpu0-thermal {

> > -                       polling-delay-passive = <250>;

> > -                       polling-delay = <1000>;

> > +                       polling-delay-passive = <0>;

> > +                       polling-delay = <0>;

>

> I thought the plan was to make this unnecessary to change?


IMO that change should be part of a different series to the thermal
core. I've not actually started working on it yet (traveling for the
next 10 days or so) but plan to do it.

Regards,
Amit
Amit Kucheria Sept. 20, 2019, 10:09 p.m. UTC | #2 
On Fri, Sep 20, 2019 at 3:07 PM Amit Kucheria <amit.kucheria@linaro.org> wrote:
>

> On Fri, Sep 20, 2019 at 3:02 PM Stephen Boyd <swboyd@chromium.org> wrote:

> >

> > Quoting Amit Kucheria (2019-09-20 14:52:24)

> > > Register upper-lower interrupts for each of the two tsens controllers.

> > >

> > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

> > > ---

> > >  arch/arm64/boot/dts/qcom/msm8996.dtsi | 60 ++++++++++++++-------------

> > >  1 file changed, 32 insertions(+), 28 deletions(-)

> > >

> > > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi

> > > index 96c0a481f454..bb763b362c16 100644

> > > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi

> > > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi

> > > @@ -175,8 +175,8 @@

> > >

> > >         thermal-zones {

> > >                 cpu0-thermal {

> > > -                       polling-delay-passive = <250>;

> > > -                       polling-delay = <1000>;

> > > +                       polling-delay-passive = <0>;

> > > +                       polling-delay = <0>;

> >

> > I thought the plan was to make this unnecessary to change?

>

> IMO that change should be part of a different series to the thermal

> core. I've not actually started working on it yet (traveling for the

> next 10 days or so) but plan to do it.


In fact, I was thinking of making the entire property optional, so I
started down the path of converting the thermal bindings to YAML but
haven't finished the process yet.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 96c0a481f454..bb763b362c16 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -175,8 +175,8 @@ 
 
 	thermal-zones {
 		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -196,8 +196,8 @@ 
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -217,8 +217,8 @@ 
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -238,8 +238,8 @@ 
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -259,8 +259,8 @@ 
 		};
 
 		gpu-thermal-top {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -274,8 +274,8 @@ 
 		};
 
 		gpu-thermal-bottom {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -289,8 +289,8 @@ 
 		};
 
 		m4m-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -304,8 +304,8 @@ 
 		};
 
 		l3-or-venus-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -319,8 +319,8 @@ 
 		};
 
 		cluster0-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -334,8 +334,8 @@ 
 		};
 
 		cluster1-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -349,8 +349,8 @@ 
 		};
 
 		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -364,8 +364,8 @@ 
 		};
 
 		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -379,8 +379,8 @@ 
 		};
 
 		mem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -394,8 +394,8 @@ 
 		};
 
 		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -591,6 +591,8 @@ 
 			reg = <0x4a9000 0x1000>, /* TM */
 			      <0x4a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -599,6 +601,8 @@ 
 			reg = <0x4ad000 0x1000>, /* TM */
 			      <0x4ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};