diff mbox series

[5.2,115/124] dmaengine: sprd: Fix the DMA link-list configuration

Message ID 20190919214823.367143978@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Sept. 19, 2019, 10:03 p.m. UTC
From: Baolin Wang <baolin.wang@linaro.org>


[ Upstream commit 689379c2f383b1fdfdff03e84cf659daf62f2088 ]

For the Spreadtrum DMA link-list mode, when the DMA engine got a slave
hardware request, which will trigger the DMA engine to load the DMA
configuration from the link-list memory automatically. But before the
slave hardware request, the slave will get an incorrect residue due
to the first node used to trigger the link-list was configured as the
last source address and destination address.

Thus we should make sure the first node was configured the start source
address and destination address, which can fix this issue.

Fixes: 4ac695464763 ("dmaengine: sprd: Support DMA link-list mode")
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

Link: https://lore.kernel.org/r/77868edb7aff9d5cb12ac3af8827ef2e244441a6.1567150471.git.baolin.wang@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Signed-off-by: Sasha Levin <sashal@kernel.org>

---
 drivers/dma/sprd-dma.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

-- 
2.20.1
diff mbox series

Patch

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index baac476c86224..525dc7338fe3b 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -908,6 +908,7 @@  sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
 	struct dma_slave_config *slave_cfg = &schan->slave_cfg;
 	dma_addr_t src = 0, dst = 0;
+	dma_addr_t start_src = 0, start_dst = 0;
 	struct sprd_dma_desc *sdesc;
 	struct scatterlist *sg;
 	u32 len = 0;
@@ -954,6 +955,11 @@  sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 			dst = sg_dma_address(sg);
 		}
 
+		if (!i) {
+			start_src = src;
+			start_dst = dst;
+		}
+
 		/*
 		 * The link-list mode needs at least 2 link-list
 		 * configurations. If there is only one sg, it doesn't
@@ -970,8 +976,8 @@  sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		}
 	}
 
-	ret = sprd_dma_fill_desc(chan, &sdesc->chn_hw, 0, 0, src, dst, len,
-				 dir, flags, slave_cfg);
+	ret = sprd_dma_fill_desc(chan, &sdesc->chn_hw, 0, 0, start_src,
+				 start_dst, len, dir, flags, slave_cfg);
 	if (ret) {
 		kfree(sdesc);
 		return NULL;