@@ -717,6 +717,7 @@ endef
distclean: clean
rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi qemu-monitor-info.texi
+ rm -f tests/tcg/config-*.mak
rm -f config-all-devices.mak config-all-disas.mak config.status
rm -f $(SUBDIR_DEVICES_MAK)
rm -f po/*.mo tests/qemu-iotests/common.env
@@ -495,27 +495,10 @@ qed="yes"
parallels="yes"
sheepdog="yes"
libxml2=""
-container="no"
debug_mutex="no"
libpmem=""
default_devices="yes"
-# cross compilers defaults, can be overridden with --cross-cc-ARCH
-cross_cc_aarch64="aarch64-linux-gnu-gcc"
-cross_cc_aarch64_be="$cross_cc_aarch64"
-cross_cc_cflags_aarch64_be="-mbig-endian"
-cross_cc_arm="arm-linux-gnueabihf-gcc"
-cross_cc_cflags_armeb="-mbig-endian"
-cross_cc_i386="i386-pc-linux-gnu-gcc"
-cross_cc_cflags_i386=""
-cross_cc_ppc="powerpc-linux-gnu-gcc"
-cross_cc_cflags_ppc="-m32"
-cross_cc_ppc64="powerpc-linux-gnu-gcc"
-cross_cc_cflags_ppc64="-m64"
-cross_cc_ppc64le="powerpc64le-linux-gnu-gcc"
-
-enabled_cross_compilers=""
-
supported_cpu="no"
supported_os="no"
bogus_os="no"
@@ -548,9 +531,12 @@ for opt do
;;
--cross-cc-cflags-*) cc_arch=${opt#--cross-cc-flags-}; cc_arch=${cc_arch%%=*}
eval "cross_cc_cflags_${cc_arch}=\$optarg"
+ cross_cc_vars="$cross_cc_vars cross_cc_cflags_${cc_arch}"
;;
--cross-cc-*) cc_arch=${opt#--cross-cc-}; cc_arch=${cc_arch%%=*}
+ cc_archs="$cc_archs $cc_arch"
eval "cross_cc_${cc_arch}=\$optarg"
+ cross_cc_vars="$cross_cc_vars cross_cc_${cc_arch}"
;;
esac
done
@@ -745,42 +731,34 @@ ARCH=
case "$cpu" in
ppc|ppc64|s390|s390x|sparc64|x32|riscv32|riscv64)
supported_cpu="yes"
- eval "cross_cc_${cpu}=\$host_cc"
;;
ppc64le)
ARCH="ppc64"
supported_cpu="yes"
- cross_cc_ppc64le=$host_cc
;;
i386|i486|i586|i686|i86pc|BePC)
cpu="i386"
supported_cpu="yes"
- cross_cc_i386=$host_cc
;;
x86_64|amd64)
cpu="x86_64"
supported_cpu="yes"
- cross_cc_x86_64=$host_cc
;;
armv*b|armv*l|arm)
cpu="arm"
supported_cpu="yes"
- cross_cc_arm=$host_cc
;;
aarch64)
cpu="aarch64"
supported_cpu="yes"
- cross_cc_aarch64=$host_cc
;;
mips*)
cpu="mips"
supported_cpu="yes"
- cross_cc_mips=$host_cc
;;
sparc|sun4[cdmuv])
cpu="sparc"
supported_cpu="yes"
- cross_cc_sparc=$host_cc
;;
*)
# This will result in either an error or falling back to TCI later
@@ -1555,44 +1533,30 @@ case "$cpu" in
ppc)
CPU_CFLAGS="-m32"
LDFLAGS="-m32 $LDFLAGS"
- cross_cc_ppc=$cc
- cross_cc_cflags_ppc="$CPU_CFLAGS"
;;
ppc64)
CPU_CFLAGS="-m64"
LDFLAGS="-m64 $LDFLAGS"
- cross_cc_ppc64=$cc
- cross_cc_cflags_ppc64="$CPU_CFLAGS"
;;
sparc)
CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc"
LDFLAGS="-m32 -mv8plus $LDFLAGS"
- cross_cc_sparc=$cc
- cross_cc_cflags_sparc="$CPU_CFLAGS"
;;
sparc64)
CPU_CFLAGS="-m64 -mcpu=ultrasparc"
LDFLAGS="-m64 $LDFLAGS"
- cross_cc_sparc64=$cc
- cross_cc_cflags_sparc64="$CPU_CFLAGS"
;;
s390)
CPU_CFLAGS="-m31"
LDFLAGS="-m31 $LDFLAGS"
- cross_cc_s390=$cc
- cross_cc_cflags_s390="$CPU_CFLAGS"
;;
s390x)
CPU_CFLAGS="-m64"
LDFLAGS="-m64 $LDFLAGS"
- cross_cc_s390x=$cc
- cross_cc_cflags_s390x="$CPU_CFLAGS"
;;
i386)
CPU_CFLAGS="-m32"
LDFLAGS="-m32 $LDFLAGS"
- cross_cc_i386=$cc
- cross_cc_cflags_i386="$CPU_CFLAGS"
;;
x86_64)
# ??? Only extremely old AMD cpus do not have cmpxchg16b.
@@ -1600,18 +1564,16 @@ case "$cpu" in
# runtime and generate the fallback to serial emulation.
CPU_CFLAGS="-m64 -mcx16"
LDFLAGS="-m64 $LDFLAGS"
- cross_cc_x86_64=$cc
- cross_cc_cflags_x86_64="$CPU_CFLAGS"
;;
x32)
CPU_CFLAGS="-mx32"
LDFLAGS="-mx32 $LDFLAGS"
- cross_cc_i386=$cc
- cross_cc_cflags_i386="$CPU_CFLAGS"
;;
# No special flags required for other host CPUs
esac
+eval "cross_cc_${cpu}=\$host_cc"
+cross_cc_vars="$cross_cc_vars cross_cc_${cpu}"
QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS"
# For user-mode emulation the host arch has to be one we explicitly
@@ -5893,17 +5855,6 @@ EOF
fi
fi
-##########################################
-# Container based cross-compiler support
-#
-# This is specifically for building test
-# cases for foreign architectures, not
-# cross-compiling QEMU itself.
-
-if has "docker" || has "podman"; then
- container=$($python $source_path/tests/docker/docker.py probe)
-fi
-
##########################################
# check for libpmem
@@ -6474,7 +6425,6 @@ echo "qed support $qed"
echo "parallels support $parallels"
echo "sheepdog support $sheepdog"
echo "capstone $capstone"
-echo "container support $container"
echo "libpmem support $libpmem"
echo "libudev $libudev"
echo "default devices $default_devices"
@@ -7384,10 +7334,6 @@ if test "$gcov" = "yes" ; then
echo "GCOV=$gcov_tool" >> $config_host_mak
fi
-if test "$docker" != "no"; then
- echo "HAVE_USER_DOCKER=y" >> $config_host_mak
-fi
-
if test "$libudev" != "no"; then
echo "CONFIG_LIBUDEV=y" >> $config_host_mak
echo "LIBUDEV_LIBS=$libudev_libs" >> $config_host_mak
@@ -7461,10 +7407,6 @@ case "$target" in
;;
esac
-target_compiler=""
-target_compiler_static=""
-target_compiler_cflags=""
-
mkdir -p $target_dir
echo "# Automatically generated by configure - do not modify" > $config_target_mak
@@ -7481,26 +7423,20 @@ case "$target_name" in
i386)
mttcg="yes"
gdb_xml_files="i386-32bit.xml"
- target_compiler=$cross_cc_i386
- target_compiler_cflags=$cross_cc_ccflags_i386
;;
x86_64)
TARGET_BASE_ARCH=i386
mttcg="yes"
gdb_xml_files="i386-64bit.xml"
- target_compiler=$cross_cc_x86_64
;;
alpha)
mttcg="yes"
- target_compiler=$cross_cc_alpha
;;
arm|armeb)
TARGET_ARCH=arm
bflt="yes"
mttcg="yes"
gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
- target_compiler=$cross_cc_arm
- eval "target_compiler_cflags=\$cross_cc_cflags_${target_name}"
;;
aarch64|aarch64_be)
TARGET_ARCH=aarch64
@@ -7508,41 +7444,32 @@ case "$target_name" in
bflt="yes"
mttcg="yes"
gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
- target_compiler=$cross_cc_aarch64
- eval "target_compiler_cflags=\$cross_cc_cflags_${target_name}"
;;
cris)
- target_compiler=$cross_cc_cris
;;
hppa)
mttcg="yes"
- target_compiler=$cross_cc_hppa
;;
lm32)
- target_compiler=$cross_cc_lm32
;;
m68k)
bflt="yes"
gdb_xml_files="cf-core.xml cf-fp.xml m68k-fp.xml"
- target_compiler=$cross_cc_m68k
;;
microblaze|microblazeel)
TARGET_ARCH=microblaze
bflt="yes"
echo "TARGET_ABI32=y" >> $config_target_mak
- target_compiler=$cross_cc_microblaze
;;
mips|mipsel)
mttcg="yes"
TARGET_ARCH=mips
- target_compiler=$cross_cc_mips
echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
;;
mipsn32|mipsn32el)
mttcg="yes"
TARGET_ARCH=mips64
TARGET_BASE_ARCH=mips
- target_compiler=$cross_cc_mipsn32
echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
echo "TARGET_ABI32=y" >> $config_target_mak
;;
@@ -7550,32 +7477,24 @@ case "$target_name" in
mttcg="yes"
TARGET_ARCH=mips64
TARGET_BASE_ARCH=mips
- target_compiler=$cross_cc_mips64
echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
;;
moxie)
- target_compiler=$cross_cc_moxie
;;
nios2)
- target_compiler=$cross_cc_nios2
;;
or1k)
- target_compiler=$cross_cc_or1k
TARGET_ARCH=openrisc
TARGET_BASE_ARCH=openrisc
;;
ppc)
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_compiler=$cross_cc_ppc
- target_compiler_cflags="$cross_cc_cflags_ppc"
;;
ppc64)
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
mttcg=yes
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
- target_compiler=$cross_cc_ppc64
- target_compiler_cflags="$cross_cc_cflags_ppc64"
;;
ppc64le)
TARGET_ARCH=ppc64
@@ -7583,7 +7502,6 @@ case "$target_name" in
TARGET_ABI_DIR=ppc
mttcg=yes
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
- target_compiler=$cross_cc_ppc64le
;;
ppc64abi32)
TARGET_ARCH=ppc64
@@ -7591,60 +7509,48 @@ case "$target_name" in
TARGET_ABI_DIR=ppc
echo "TARGET_ABI32=y" >> $config_target_mak
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
- target_compiler=$cross_cc_ppc64abi32
;;
riscv32)
TARGET_BASE_ARCH=riscv
TARGET_ABI_DIR=riscv
mttcg=yes
gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml"
- target_compiler=$cross_cc_riscv32
;;
riscv64)
TARGET_BASE_ARCH=riscv
TARGET_ABI_DIR=riscv
mttcg=yes
gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml"
- target_compiler=$cross_cc_riscv64
;;
sh4|sh4eb)
TARGET_ARCH=sh4
bflt="yes"
- target_compiler=$cross_cc_sh4
;;
sparc)
- target_compiler=$cross_cc_sparc
;;
sparc64)
TARGET_BASE_ARCH=sparc
- target_compiler=$cross_cc_sparc64
;;
sparc32plus)
TARGET_ARCH=sparc64
TARGET_BASE_ARCH=sparc
TARGET_ABI_DIR=sparc
- target_compiler=$cross_cc_sparc32plus
echo "TARGET_ABI32=y" >> $config_target_mak
;;
s390x)
mttcg=yes
gdb_xml_files="s390x-core64.xml s390-acr.xml s390-fpr.xml s390-vx.xml s390-cr.xml s390-virt.xml s390-gs.xml"
- target_compiler=$cross_cc_s390x
;;
tilegx)
- target_compiler=$cross_cc_tilegx
;;
tricore)
- target_compiler=$cross_cc_tricore
;;
unicore32)
- target_compiler=$cross_cc_unicore32
;;
xtensa|xtensaeb)
TARGET_ARCH=xtensa
bflt="yes"
mttcg="yes"
- target_compiler=$cross_cc_xtensa
;;
*)
error_exit "Unsupported target CPU"
@@ -7655,27 +7561,6 @@ if [ "$TARGET_BASE_ARCH" = "" ]; then
TARGET_BASE_ARCH=$TARGET_ARCH
fi
-# Do we have a cross compiler for this target?
-if has $target_compiler; then
-
- write_c_skeleton
-
- if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC -static ; then
- # For host systems we might get away with building without -static
- if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC ; then
- target_compiler=""
- else
- enabled_cross_compilers="${enabled_cross_compilers} '${target_compiler}'"
- target_compiler_static="n"
- fi
- else
- enabled_cross_compilers="${enabled_cross_compilers} '${target_compiler}'"
- target_compiler_static="y"
- fi
-else
- target_compiler=""
-fi
-
symlink "$source_path/Makefile.target" "$target_dir/Makefile"
upper() {
@@ -7752,18 +7637,6 @@ if test "$target_bsd_user" = "yes" ; then
echo "CONFIG_BSD_USER=y" >> $config_target_mak
fi
-if test -n "$target_compiler"; then
- echo "CROSS_CC_GUEST=\"$target_compiler\"" >> $config_target_mak
-
- if test -n "$target_compiler_static"; then
- echo "CROSS_CC_GUEST_STATIC=$target_compiler_static" >> $config_target_mak
- fi
-
- if test -n "$target_compiler_cflags"; then
- echo "CROSS_CC_GUEST_CFLAGS=$target_compiler_cflags" >> $config_target_mak
- fi
-fi
-
# generate QEMU_CFLAGS/LDFLAGS for targets
@@ -7894,11 +7767,6 @@ done # for target in $targets
echo "PIXMAN_CFLAGS=$pixman_cflags" >> $config_host_mak
echo "PIXMAN_LIBS=$pixman_libs" >> $config_host_mak
-if test -n "$enabled_cross_compilers"; then
- echo
- echo "NOTE: cross-compilers enabled: $enabled_cross_compilers"
-fi
-
if [ "$fdt" = "git" ]; then
echo "config-host.h: dtc/all" >> $config_host_mak
fi
@@ -7927,15 +7795,14 @@ fi
# so the build tree will be missing the link back to the new file, and
# tests might fail. Prefer to keep the relevant files in their own
# directory and symlink the directory instead.
-DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos tests/qapi-schema tests/tcg/xtensa tests/qemu-iotests tests/vm"
+DIRS="tests tests/tcg tests/tcg/lm32 tests/libqos tests/qapi-schema tests/qemu-iotests tests/vm"
DIRS="$DIRS tests/fp tests/qgraph"
DIRS="$DIRS docs docs/interop fsdev scsi"
DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
DIRS="$DIRS roms/seabios roms/vgabios"
-LINKS="Makefile tests/tcg/Makefile"
-LINKS="$LINKS tests/tcg/cris/Makefile tests/tcg/cris/.gdbinit"
-LINKS="$LINKS tests/tcg/lm32/Makefile tests/tcg/xtensa/Makefile po/Makefile"
-LINKS="$LINKS tests/fp/Makefile"
+LINKS="Makefile"
+LINKS="$LINKS tests/tcg/lm32/Makefile po/Makefile"
+LINKS="$LINKS tests/tcg/Makefile.target tests/fp/Makefile"
LINKS="$LINKS pc-bios/optionrom/Makefile pc-bios/keymaps"
LINKS="$LINKS pc-bios/spapr-rtas/Makefile"
LINKS="$LINKS pc-bios/s390-ccw/Makefile"
@@ -7965,6 +7832,12 @@ for f in $LINKS ; do
fi
done
+(for i in $cross_cc_vars; do
+ export $i
+done
+export target_list source_path
+$source_path/tests/tcg/configure.sh)
+
# temporary config to build submodules
for rom in seabios vgabios ; do
config_mak=roms/$rom/config.mak
@@ -1059,30 +1059,28 @@ BUILD_TCG_TARGET_RULES=$(patsubst %,build-tcg-tests-%, $(TARGET_DIRS))
CLEAN_TCG_TARGET_RULES=$(patsubst %,clean-tcg-tests-%, $(TARGET_DIRS))
RUN_TCG_TARGET_RULES=$(patsubst %,run-tcg-tests-%, $(TARGET_DIRS))
-ifeq ($(HAVE_USER_DOCKER),y)
# Probe for the Docker Builds needed for each build
$(foreach PROBE_TARGET,$(TARGET_DIRS), \
$(eval -include $(SRC_PATH)/tests/tcg/Makefile.prereqs))
-endif
build-tcg-tests-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
-f $(SRC_PATH)/tests/tcg/Makefile.qemu \
SRC_PATH=$(SRC_PATH) \
- V="$(V)" TARGET_DIR="$*/" guest-tests, \
+ V="$(V)" TARGET="$*" guest-tests, \
"BUILD", "TCG tests for $*")
run-tcg-tests-%: build-tcg-tests-% %/all
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
-f $(SRC_PATH)/tests/tcg/Makefile.qemu \
SRC_PATH=$(SRC_PATH) SPEED="$(SPEED)" \
- V="$(V)" TARGET_DIR="$*/" run-guest-tests, \
+ V="$(V)" TARGET="$*" run-guest-tests, \
"RUN", "TCG tests for $*")
clean-tcg-tests-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
-f $(SRC_PATH)/tests/tcg/Makefile.qemu \
- SRC_PATH=$(SRC_PATH) TARGET_DIR="$*/" clean-guest-tests, \
+ SRC_PATH=$(SRC_PATH) TARGET="$*" clean-guest-tests, \
"RUN", "TCG tests for $*")
.PHONY: build-tcg
@@ -7,24 +7,12 @@
# selection of required docker targets before we invoke a sub-make for
# each target.
-# First we need the target makefile which tells us the target architecture
-CROSS_CC_GUEST:=
--include $(BUILD_DIR)/$(PROBE_TARGET)/config-target.mak
-
-# Then we load up the target architecture makefiles which tell us
-# about the compilers
DOCKER_IMAGE:=
--include $(SRC_PATH)/tests/tcg/$(TARGET_BASE_ARCH)/Makefile.include
--include $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.include
+-include $(BUILD_DIR)/tests/tcg/config-$(PROBE_TARGET).mak
-ifndef CROSS_CC_GUEST
ifneq ($(DOCKER_IMAGE),)
build-tcg-tests-$(PROBE_TARGET): docker-image-$(DOCKER_IMAGE)
+$(BUILD_DIR)/tests/tcg/config_$(PROBE_TARGET).mak: config-host.mak
+config-host.mak: $(SRC_PATH)/tests/tcg/configure.sh
endif
-endif
-
-# Clean-up
-# undefine TARGET_NAME
-# undefine TARGET_BASE_ARCH
-# undefine TARGET_ABI_DIR
@@ -8,17 +8,22 @@
# to do it for us.
#
-# The per ARCH makefile, if it exists, holds extra information about
+include $(SRC_PATH)/rules.mak
+
+# The configure script fills in extra information about
# useful docker images or alternative compiler flags.
-include $(TARGET_DIR)config-target.mak
-include $(SRC_PATH)/rules.mak
-include $(wildcard \
- $(SRC_PATH)/tests/tcg/$(TARGET_BASE_ARCH)/Makefile.include \
- $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.include)
+CROSS_CC_GUEST:=
+DOCKER_IMAGE:=
+-include $(BUILD_DIR)/tests/tcg/config-$(TARGET).mak
GUEST_BUILD=
TCG_MAKE=../Makefile.target
+
+# We also need the Docker make rules to depend on
+SKIP_DOCKER_BUILD=1
+include $(SRC_PATH)/tests/docker/Makefile.include
+
# Support installed Cross Compilers
ifdef CROSS_CC_GUEST
@@ -26,11 +31,11 @@ ifdef CROSS_CC_GUEST
.PHONY: cross-build-guest-tests
cross-build-guest-tests:
$(call quiet-command, \
- (mkdir -p tests/tcg/$(TARGET_DIR) && cd tests/tcg/$(TARGET_DIR) && \
- $(MAKE) -f $(TCG_MAKE) TARGET_DIR="$(TARGET_DIR)" CC="$(CROSS_CC_GUEST)" \
+ (mkdir -p tests/tcg/$(TARGET) && cd tests/tcg/$(TARGET) && \
+ $(MAKE) -f $(TCG_MAKE) TARGET="$(TARGET)" CC="$(CROSS_CC_GUEST)" \
SRC_PATH="$(SRC_PATH)" BUILD_STATIC=$(CROSS_CC_GUEST_STATIC) \
- EXTRA_CFLAGS=$(CROSS_CC_GUEST_CFLAGS)), \
- "BUILD","$(TARGET_NAME) guest-tests with $(CROSS_CC_GUEST)")
+ EXTRA_CFLAGS="$(CROSS_CC_GUEST_CFLAGS)"), \
+ "BUILD","$(TARGET) guest-tests with $(CROSS_CC_GUEST)")
GUEST_BUILD=cross-build-guest-tests
@@ -38,30 +43,24 @@ endif
# Support building with Docker
-ifeq ($(HAVE_USER_DOCKER)$(GUEST_BUILD),y)
ifneq ($(DOCKER_IMAGE),)
-# We also need the Docker make rules to depend on
-SKIP_DOCKER_BUILD=1
-include $(SRC_PATH)/tests/docker/Makefile.include
-
DOCKER_COMPILE_CMD="$(DOCKER_SCRIPT) cc \
- --cc $(DOCKER_CROSS_COMPILER) \
+ --cc $(DOCKER_CROSS_CC_GUEST) \
-i qemu:$(DOCKER_IMAGE) \
-s $(SRC_PATH) -- "
.PHONY: docker-build-guest-tests
docker-build-guest-tests: docker-image-$(DOCKER_IMAGE)
$(call quiet-command, \
- (mkdir -p tests/tcg/$(TARGET_DIR) && cd tests/tcg/$(TARGET_DIR) && \
- $(MAKE) -f $(TCG_MAKE) TARGET_DIR="$(TARGET_DIR)" CC=$(DOCKER_COMPILE_CMD) \
+ (mkdir -p tests/tcg/$(TARGET) && cd tests/tcg/$(TARGET) && \
+ $(MAKE) -f $(TCG_MAKE) TARGET="$(TARGET)" CC=$(DOCKER_COMPILE_CMD) \
SRC_PATH="$(SRC_PATH)" BUILD_STATIC=y \
- EXTRA_CFLAGS=$(DOCKER_CROSS_COMPILER_CFLAGS)), \
- "BUILD","$(TARGET_NAME) guest-tests with docker qemu:$(DOCKER_IMAGE)")
+ EXTRA_CFLAGS="$(CROSS_CC_GUEST_CFLAGS)"), \
+ "BUILD","$(TARGET) guest-tests with docker qemu:$(DOCKER_IMAGE)")
GUEST_BUILD=docker-build-guest-tests
-endif
endif
# Final targets
@@ -75,22 +74,22 @@ guest-tests: $(GUEST_BUILD)
run-guest-tests: guest-tests
$(call quiet-command, \
- (cd tests/tcg/$(TARGET_DIR) && \
- $(MAKE) -f $(TCG_MAKE) TARGET_DIR="$(TARGET_DIR)" \
+ (cd tests/tcg/$(TARGET) && \
+ $(MAKE) -f $(TCG_MAKE) TARGET="$(TARGET)" \
SRC_PATH="$(SRC_PATH)" SPEED=$(SPEED) run), \
"RUN", "tests for $(TARGET_NAME)")
else
guest-tests:
$(call quiet-command, /bin/true, "BUILD", \
- "$(TARGET_DIR) guest-tests SKIPPED")
+ "$(TARGET) guest-tests SKIPPED")
run-guest-tests:
$(call quiet-command, /bin/true, "RUN", \
- "tests for $(TARGET_DIR) SKIPPED")
+ "tests for $(TARGET) SKIPPED")
endif
# It doesn't matter if these don't exits
.PHONY: clean-guest-tests
clean-guest-tests:
- rm -rf tests/tcg/$(TARGET_DIR)
+ rm -rf tests/tcg/$(TARGET)
@@ -31,7 +31,7 @@
all:
-include ../../config-host.mak
--include ../../../$(TARGET_DIR)/config-target.mak
+-include ../config-$(TARGET).mak
# for including , in command strings
COMMA := ,
@@ -63,12 +63,6 @@ CFLAGS=
QEMU_CFLAGS=
LDFLAGS=
-# The QEMU for this TARGET
-ifdef CONFIG_USER_ONLY
-QEMU=../../../$(TARGET_DIR)/qemu-$(TARGET_NAME)
-else
-QEMU=../../../$(TARGET_DIR)/qemu-system-$(TARGET_NAME)
-endif
QEMU_OPTS=
deleted file mode 100644
@@ -1,8 +0,0 @@
-# Makefile.include for AArch64 targets
-#
-# We don't have any bigendian build tools so we only use this for AArch64
-
-ifeq ($(TARGET_NAME),aarch64)
-DOCKER_IMAGE=debian-buster-arm64-cross
-DOCKER_CROSS_COMPILER=aarch64-linux-gnu-gcc
-endif
deleted file mode 100644
@@ -1,2 +0,0 @@
-DOCKER_IMAGE=debian-alpha-cross
-DOCKER_CROSS_COMPILER=alpha-linux-gnu-gcc
deleted file mode 100644
@@ -1,8 +0,0 @@
-# Makefile.include for all ARM targets
-#
-# We don't have any bigendian build tools so we only use this for armhf
-
-ifeq ($(TARGET_NAME),arm)
-DOCKER_IMAGE=debian-armhf-cross
-DOCKER_CROSS_COMPILER=arm-linux-gnueabihf-gcc
-endif
new file mode 100755
@@ -0,0 +1,234 @@
+#! /bin/sh
+
+if test -z "$source_path"; then
+ echo Do not invoke this script directly. It is called
+ echo automatically by configure.
+ exit 1
+fi
+
+write_c_skeleton() {
+ cat > $TMPC <<EOF
+int main(void) { return 0; }
+EOF
+}
+
+has() {
+ command -v "$1" >/dev/null 2>&1
+}
+
+do_compiler() {
+ # Run the compiler, capturing its output to the log. First argument
+ # is compiler binary to execute.
+ local compiler="$1"
+ shift
+ if test -n "$BASH_VERSION"; then eval '
+ echo >>config.log "
+funcs: ${FUNCNAME[*]}
+lines: ${BASH_LINENO[*]}"
+ '; fi
+ echo $compiler "$@" >> config.log
+ $compiler "$@" >> config.log 2>&1 || return $?
+}
+
+
+TMPDIR1="config-temp"
+TMPC="${TMPDIR1}/qemu-conf.c"
+TMPE="${TMPDIR1}/qemu-conf.exe"
+
+container="no"
+if has "docker" || has "podman"; then
+ container=$($python $source_path/tests/docker/docker.py probe)
+fi
+
+# cross compilers defaults, can be overridden with --cross-cc-ARCH
+: ${cross_cc_aarch64="aarch64-linux-gnu-gcc"}
+: ${cross_cc_aarch64_be="$cross_cc_aarch64"}
+: ${cross_cc_cflags_aarch64_be="-mbig-endian"}
+: ${cross_cc_arm="arm-linux-gnueabihf-gcc"}
+: ${cross_cc_cflags_armeb="-mbig-endian"}
+: ${cross_cc_i386="i386-pc-linux-gnu-gcc"}
+: ${cross_cc_cflags_i386="-m32"}
+: ${cross_cc_x86_64="x86_64-pc-linux-gnu-gcc"}
+: ${cross_cc_cflags_x86_64="-m64"}
+: ${cross_cc_ppc="powerpc-linux-gnu-gcc"}
+: ${cross_cc_cflags_ppc="-m32"}
+: ${cross_cc_ppc64="powerpc-linux-gnu-gcc"}
+: ${cross_cc_cflags_ppc64="-m64"}
+: ${cross_cc_ppc64le="powerpc64le-linux-gnu-gcc"}
+: ${cross_cc_cflags_s390x="-m64"}
+: ${cross_cc_cflags_sparc="-m32 -mv8plus -mcpu=ultrasparc"}
+: ${cross_cc_cflags_sparc64="-m64 -mcpu=ultrasparc"}
+
+for target in $target_list; do
+ arch=${target%%-*}
+ case $arch in
+ arm|armeb)
+ arches=arm
+ ;;
+ aarch64|aarch64_be)
+ arches="aarch64 arm"
+ ;;
+ mips*)
+ arches=mips
+ ;;
+ ppc*)
+ arches=ppc
+ ;;
+ sh4|sh4eb)
+ arches=sh4
+ ;;
+ x86_64)
+ arches="x86_64 i386"
+ ;;
+ xtensa|xtensaeb)
+ arches=xtensa
+ ;;
+ alpha|cris|hppa|i386|lm32|m68k|openrisc|riscv64|s390x|sh4|sparc64)
+ arches=$target
+ ;;
+ *)
+ continue
+ ;;
+ esac
+
+ container_image=
+ case $target in
+ aarch64-*)
+ # We don't have any bigendian build tools so we only use this for AArch64
+ container_image=debian-buster-arm64-cross
+ container_cross_cc=aarch64-linux-gnu-gcc
+ ;;
+ alpha-*)
+ container_image=debian-alpha-cross
+ container_cross_cc=alpha-linux-gnu-gcc
+ ;;
+ arm-*)
+ # We don't have any bigendian build tools so we only use this for AArch64
+ container_image=debian-armhf-cross
+ container_cross_cc=arm-linux-gnueabihf-gcc
+ ;;
+ cris-*)
+ container_image=fedora-cris-cross
+ container_cross_cc=cris-linux-gnu-gcc
+ ;;
+ hppa-*)
+ container_image=debian-hppa-cross
+ container_cross_cc=hppa-linux-gnu-gcc
+ ;;
+ i386-*)
+ container_image=fedora-i386-cross
+ container_cross_cc=gcc
+ ;;
+ m68k-*)
+ container_image=debian-m68k-cross
+ container_cross_cc=m68k-linux-gnu-gcc
+ ;;
+ mips64el-*)
+ container_image=debian-mips64el-cross
+ container_cross_cc=mips64el-linux-gnuabi64-gcc
+ ;;
+ mips64-*)
+ container_image=debian-mips64-cross
+ container_cross_cc=mips64-linux-gnuabi64-gcc
+ ;;
+ mipsel-*)
+ container_image=debian-mipsel-cross
+ container_cross_cc=mipsel-linux-gnu-gcc
+ ;;
+ mips-*)
+ container_image=debian-mips-cross
+ container_cross_cc=mips-linux-gnu-gcc
+ ;;
+ ppc-*)
+ container_image=debian-powerpc-cross
+ container_cross_cc=powerpc-linux-gnu-gcc
+ ;;
+ ppc64-*)
+ container_image=debian-ppc64-cross
+ container_cross_cc=powerpc64-linux-gnu-gcc
+ ;;
+ ppc64le-*)
+ container_image=debian-ppc64el-cross
+ container_cross_cc=powerpc64le-linux-gnu-gcc
+ ;;
+ riscv64-*)
+ container_image=debian-riscv64-cross
+ container_cross_cc=riscv64-linux-gnu-gcc
+ ;;
+ s390x-*)
+ container_image=debian-s390x-cross
+ container_cross_cc=s390x-linux-gnu-gcc
+ ;;
+ sh4-*)
+ container_image=debian-sh4-cross
+ container_cross_cc=sh4-linux-gnu-gcc
+ ;;
+ sparc64-*)
+ container_image=debian-sparc64-cross
+ container_cross_cc=sparc64-linux-gnu-gcc
+ ;;
+ xtensa*-softmmu)
+ container_image=debian-xtensa-cross
+
+ # default to the dc232b cpu
+ container_cross_cc=/opt/2018.02/xtensa-dc232b-elf/bin/xtensa-dc232b-elf-gcc
+ ;;
+ esac
+
+ config_target_mak=tests/tcg/config-$target.mak
+
+ echo "# Automatically generated by configure - do not modify" > $config_target_mak
+ echo "TARGET_NAME=$arch" >> $config_target_mak
+ case $target in
+ *-linux-user | *-bsd-user)
+ echo "CONFIG_USER_ONLY=y" >> $config_target_mak
+ echo "QEMU=\$(BUILD_DIR)/$target/qemu-$arch" >> $config_target_mak
+ ;;
+ *-softmmu)
+ echo "CONFIG_SOFTMMU=y" >> $config_target_mak
+ echo "QEMU=\$(BUILD_DIR)/$target/qemu-system-$arch" >> $config_target_mak
+ ;;
+ esac
+
+ eval "target_compiler_cflags=\${cross_cc_cflags_$arch}"
+ echo "CROSS_CC_GUEST_CFLAGS=$target_compiler_cflags" >> $config_target_mak
+
+ got_cross_cc=no
+ for i in $arch $arches; do
+ if eval test "x\${cross_cc_$i+yes}" != xyes; then
+ continue
+ fi
+
+ eval "target_compiler=\${cross_cc_$i}"
+ if ! has $target_compiler; then
+ continue
+ fi
+ write_c_skeleton
+ if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC -static ; then
+ # For host systems we might get away with building without -static
+ if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC ; then
+ continue
+ fi
+ echo "CROSS_CC_GUEST_STATIC=y" >> $config_target_mak
+ else
+ echo "CROSS_CC_GUEST_STATIC=y" >> $config_target_mak
+ fi
+ echo "CROSS_CC_GUEST=$target_compiler" >> $config_target_mak
+ enabled_cross_compilers="$enabled_cross_compilers $target_compiler"
+ got_cross_cc=yes
+ break
+ done
+
+ if test $got_cross_cc = no && test "$container" != no && test -n "$container_image"; then
+ echo "DOCKER_IMAGE=$container_image" >> $config_target_mak
+ echo "DOCKER_CROSS_CC_GUEST=$container_cross_cc" >> $config_target_mak
+ fi
+done
+
+# report container support state
+echo "cross containers $container"
+
+if test -n "$enabled_cross_compilers"; then
+ echo
+ echo "NOTE: guest cross-compilers enabled:$enabled_cross_compilers"
+fi
deleted file mode 100644
@@ -1,6 +0,0 @@
-#
-# Makefile.include for all CRIS targets
-#
-
-DOCKER_IMAGE=fedora-cris-cross
-DOCKER_CROSS_COMPILER=cris-linux-gnu-gcc
deleted file mode 100644
@@ -1,2 +0,0 @@
-DOCKER_IMAGE=debian-hppa-cross
-DOCKER_CROSS_COMPILER=hppa-linux-gnu-gcc
deleted file mode 100644
@@ -1,9 +0,0 @@
-#
-# Makefile.include for all i386
-#
-# There is enough brokeness in x86_64 compilers that we don't default
-# to using the x86_64 system compiler for i386 binaries.
-#
-
-DOCKER_IMAGE=fedora-i386-cross
-DOCKER_CROSS_COMPILER=gcc
deleted file mode 100644
@@ -1,2 +0,0 @@
-DOCKER_IMAGE=debian-m68k-cross
-DOCKER_CROSS_COMPILER=m68k-linux-gnu-gcc
deleted file mode 100644
@@ -1,20 +0,0 @@
-#
-# Makefile.include for all MIPs targets
-#
-# As Debian doesn't support mip64 in big endian mode the only way to
-# build BE is to pass a working cross compiler to ./configure
-#
-
-ifeq ($(TARGET_NAME),mips64el)
-DOCKER_IMAGE=debian-mips64el-cross
-DOCKER_CROSS_COMPILER=mips64el-linux-gnuabi64-gcc
-else ifeq ($(TARGET_NAME),mips64)
-DOCKER_IMAGE=debian-mips64-cross
-DOCKER_CROSS_COMPILER=mips64-linux-gnuabi64-gcc
-else ifeq ($(TARGET_NAME),mipsel)
-DOCKER_IMAGE=debian-mipsel-cross
-DOCKER_CROSS_COMPILER=mipsel-linux-gnu-gcc
-else ifeq ($(TARGET_NAME),mips)
-DOCKER_IMAGE=debian-mips-cross
-DOCKER_CROSS_COMPILER=mips-linux-gnu-gcc
-endif
deleted file mode 100644
@@ -1,10 +0,0 @@
-ifeq ($(TARGET_NAME),ppc)
-DOCKER_IMAGE=debian-powerpc-cross
-DOCKER_CROSS_COMPILER=powerpc-linux-gnu-gcc
-else ifeq ($(TARGET_NAME),ppc64)
-DOCKER_IMAGE=debian-ppc64-cross
-DOCKER_CROSS_COMPILER=powerpc64-linux-gnu-gcc
-else ifeq ($(TARGET_NAME),ppc64le)
-DOCKER_IMAGE=debian-ppc64el-cross
-DOCKER_CROSS_COMPILER=powerpc64le-linux-gnu-gcc
-endif
deleted file mode 100644
@@ -1,10 +0,0 @@
-#
-# Makefile.include for all RISCV targets
-#
-# Debian only really cares about 64 bit going forward
-#
-
-ifeq ($(TARGET_NAME),riscv64)
-DOCKER_IMAGE=debian-riscv64-cross
-DOCKER_CROSS_COMPILER=riscv64-linux-gnu-gcc
-endif
deleted file mode 100644
@@ -1,2 +0,0 @@
-DOCKER_IMAGE=debian-s390x-cross
-DOCKER_CROSS_COMPILER=s390x-linux-gnu-gcc
deleted file mode 100644
@@ -1,4 +0,0 @@
-ifneq ($(TARGET_NAME), sh4eb)
-DOCKER_IMAGE=debian-sh4-cross
-DOCKER_CROSS_COMPILER=sh4-linux-gnu-gcc
-endif
deleted file mode 100644
@@ -1,2 +0,0 @@
-DOCKER_IMAGE=debian-sparc64-cross
-DOCKER_CROSS_COMPILER=sparc64-linux-gnu-gcc
deleted file mode 100644
@@ -1,11 +0,0 @@
-# Makefile.include for xtensa targets
-#
-# The compilers can only be used for building system tests
-
-ifeq ($(CONFIG_SOFTMMU),y)
-DOCKER_IMAGE=debian-xtensa-cross
-
-# default to the dc232b cpu
-DOCKER_CROSS_COMPILER=/opt/2018.02/xtensa-dc232b-elf/bin/xtensa-dc232b-elf-gcc
-DOCKER_CROSS_LINKER=/opt/2018.02/xtensa-dc232b-elf/bin/xtensa-dc232b-elf-ld
-endif