@@ -39,9 +39,6 @@ endif
PROGS=$(QEMU_PROG) $(QEMU_PROGW)
STPFILES=
-# Makefile Tests
-include $(SRC_PATH)/tests/tcg/Makefile.include
-
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
@@ -1062,23 +1062,28 @@ RUN_TCG_TARGET_RULES=$(patsubst %,run-tcg-tests-%, $(TARGET_DIRS))
ifeq ($(HAVE_USER_DOCKER),y)
# Probe for the Docker Builds needed for each build
$(foreach PROBE_TARGET,$(TARGET_DIRS), \
- $(eval -include $(SRC_PATH)/tests/tcg/Makefile.probe) \
- $(if $(DOCKER_PREREQ), \
- $(eval build-tcg-tests-$(PROBE_TARGET): $(DOCKER_PREREQ))))
+ $(eval -include $(SRC_PATH)/tests/tcg/Makefile.prereqs))
endif
build-tcg-tests-%:
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" \
- SKIP_DOCKER_BUILD=1 TARGET_DIR="$*/" guest-tests, \
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
+ -f $(SRC_PATH)/tests/tcg/Makefile.qemu \
+ SRC_PATH=$(SRC_PATH) \
+ V="$(V)" TARGET_DIR="$*/" guest-tests, \
"BUILD", "TCG tests for $*")
-run-tcg-tests-%: % build-tcg-tests-%
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" \
- SKIP_DOCKER_BUILD=1 TARGET_DIR="$*/" run-guest-tests, \
+run-tcg-tests-%: build-tcg-tests-% %/all
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
+ -f $(SRC_PATH)/tests/tcg/Makefile.qemu \
+ SRC_PATH=$(SRC_PATH) SPEED="$(SPEED)" \
+ V="$(V)" TARGET_DIR="$*/" run-guest-tests, \
"RUN", "TCG tests for $*")
clean-tcg-tests-%:
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" clean-guest-tests,)
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
+ -f $(SRC_PATH)/tests/tcg/Makefile.qemu \
+ SRC_PATH=$(SRC_PATH) TARGET_DIR="$*/" clean-guest-tests, \
+ "RUN", "TCG tests for $*")
.PHONY: build-tcg
build-tcg: $(BUILD_TCG_TARGET_RULES)
similarity index 92%
rename from tests/tcg/Makefile.probe
rename to tests/tcg/Makefile.prereqs
@@ -8,20 +8,19 @@
# each target.
# First we need the target makefile which tells us the target architecture
+CROSS_CC_GUEST:=
-include $(BUILD_DIR)/$(PROBE_TARGET)/config-target.mak
# Then we load up the target architecture makefiles which tell us
# about the compilers
-CROSS_CC_GUEST:=
DOCKER_IMAGE:=
-DOCKER_PREREQ:=
-include $(SRC_PATH)/tests/tcg/$(TARGET_BASE_ARCH)/Makefile.include
-include $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.include
ifndef CROSS_CC_GUEST
ifneq ($(DOCKER_IMAGE),)
-DOCKER_PREREQ:=docker-image-$(DOCKER_IMAGE)
+build-tcg-tests-$(PROBE_TARGET): docker-image-$(DOCKER_IMAGE)
endif
endif
similarity index 52%
rename from tests/tcg/Makefile.include
rename to tests/tcg/Makefile.qemu
@@ -2,20 +2,23 @@
#
# TCG tests (per-target rules)
#
-# This Makefile fragment is included from the per-target
-# Makefile.target so will be invoked for each linux-user program we
-# build. We have two options for compiling, either using a configured
-# guest compiler or calling one of our docker images to do it for us.
+# This Makefile fragment is included from the build-tcg target, once
+# for each target we build. We have two options for compiling, either
+# using a configured guest compiler or calling one of our docker images
+# to do it for us.
#
# The per ARCH makefile, if it exists, holds extra information about
# useful docker images or alternative compiler flags.
--include $(SRC_PATH)/tests/tcg/$(TARGET_BASE_ARCH)/Makefile.include
--include $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.include
+include $(TARGET_DIR)config-target.mak
+include $(SRC_PATH)/rules.mak
+include $(wildcard \
+ $(SRC_PATH)/tests/tcg/$(TARGET_BASE_ARCH)/Makefile.include \
+ $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.include)
GUEST_BUILD=
-TCG_MAKE=$(SRC_PATH)/tests/tcg/Makefile
+TCG_MAKE=../Makefile.target
# Support installed Cross Compilers
ifdef CROSS_CC_GUEST
@@ -23,9 +26,9 @@ ifdef CROSS_CC_GUEST
.PHONY: cross-build-guest-tests
cross-build-guest-tests:
$(call quiet-command, \
- (mkdir -p tests && cd tests && \
- $(MAKE) -f $(TCG_MAKE) CC=$(CROSS_CC_GUEST) \
- BUILD_STATIC=$(CROSS_CC_GUEST_STATIC) \
+ (mkdir -p tests/tcg/$(TARGET_DIR) && cd tests/tcg/$(TARGET_DIR) && \
+ $(MAKE) -f $(TCG_MAKE) TARGET_DIR="$(TARGET_DIR)" CC="$(CROSS_CC_GUEST)" \
+ SRC_PATH="$(SRC_PATH)" BUILD_STATIC=$(CROSS_CC_GUEST_STATIC) \
EXTRA_CFLAGS=$(CROSS_CC_GUEST_CFLAGS)), \
"BUILD","$(TARGET_NAME) guest-tests with $(CROSS_CC_GUEST)")
@@ -39,20 +42,20 @@ ifeq ($(HAVE_USER_DOCKER)$(GUEST_BUILD),y)
ifneq ($(DOCKER_IMAGE),)
# We also need the Docker make rules to depend on
+SKIP_DOCKER_BUILD=1
include $(SRC_PATH)/tests/docker/Makefile.include
DOCKER_COMPILE_CMD="$(DOCKER_SCRIPT) cc \
--cc $(DOCKER_CROSS_COMPILER) \
-i qemu:$(DOCKER_IMAGE) \
-s $(SRC_PATH) -- "
-DOCKER_PREREQ=docker-image-$(DOCKER_IMAGE)
.PHONY: docker-build-guest-tests
-docker-build-guest-tests: $(DOCKER_PREREQ)
+docker-build-guest-tests: docker-image-$(DOCKER_IMAGE)
$(call quiet-command, \
- (mkdir -p tests && cd tests && \
- $(MAKE) -f $(TCG_MAKE) CC=$(DOCKER_COMPILE_CMD) \
- BUILD_STATIC=y \
+ (mkdir -p tests/tcg/$(TARGET_DIR) && cd tests/tcg/$(TARGET_DIR) && \
+ $(MAKE) -f $(TCG_MAKE) TARGET_DIR="$(TARGET_DIR)" CC=$(DOCKER_COMPILE_CMD) \
+ SRC_PATH="$(SRC_PATH)" BUILD_STATIC=y \
EXTRA_CFLAGS=$(DOCKER_CROSS_COMPILER_CFLAGS)), \
"BUILD","$(TARGET_NAME) guest-tests with docker qemu:$(DOCKER_IMAGE)")
@@ -62,27 +65,32 @@ endif
endif
# Final targets
+all:
+ @echo "Do not invoke this Makefile directly"; exit 1
+
.PHONY: guest-tests
ifneq ($(GUEST_BUILD),)
guest-tests: $(GUEST_BUILD)
-run-guest-tests: guest-tests qemu-$(subst y,system-,$(CONFIG_SOFTMMU))$(TARGET_NAME)
+run-guest-tests: guest-tests
$(call quiet-command, \
- (cd tests && $(MAKE) -f $(TCG_MAKE) SPEED=$(SPEED) run), \
+ (cd tests/tcg/$(TARGET_DIR) && \
+ $(MAKE) -f $(TCG_MAKE) TARGET_DIR="$(TARGET_DIR)" \
+ SRC_PATH="$(SRC_PATH)" SPEED=$(SPEED) run), \
"RUN", "tests for $(TARGET_NAME)")
else
guest-tests:
$(call quiet-command, /bin/true, "BUILD", \
- "$(TARGET_NAME) guest-tests SKIPPED")
+ "$(TARGET_DIR) guest-tests SKIPPED")
run-guest-tests:
$(call quiet-command, /bin/true, "RUN", \
- "tests for $(TARGET_NAME) SKIPPED")
+ "tests for $(TARGET_DIR) SKIPPED")
endif
# It doesn't matter if these don't exits
.PHONY: clean-guest-tests
clean-guest-tests:
- rm -rf tests || echo "no $(TARGET_NAME) tests to remove"
+ rm -rf tests/tcg/$(TARGET_DIR)
similarity index 92%
rename from tests/tcg/Makefile
rename to tests/tcg/Makefile.target
@@ -29,8 +29,9 @@
# We also expect to be in the tests build dir for the FOO-(linux-user|softmmu).
#
+all:
-include ../../config-host.mak
--include ../config-target.mak
+-include ../../../$(TARGET_DIR)/config-target.mak
# for including , in command strings
COMMA := ,
@@ -64,9 +65,9 @@ LDFLAGS=
# The QEMU for this TARGET
ifdef CONFIG_USER_ONLY
-QEMU=../qemu-$(TARGET_NAME)
+QEMU=../../../$(TARGET_DIR)/qemu-$(TARGET_NAME)
else
-QEMU=../qemu-system-$(TARGET_NAME)
+QEMU=../../../$(TARGET_DIR)/qemu-system-$(TARGET_NAME)
endif
QEMU_OPTS=
@@ -82,10 +83,7 @@ ifdef CONFIG_USER_ONLY
# The order we include is important. We include multiarch, base arch
# and finally arch if it's not the same as base arch.
-include $(SRC_PATH)/tests/tcg/multiarch/Makefile.target
--include $(SRC_PATH)/tests/tcg/$(TARGET_BASE_ARCH)/Makefile.target
-ifneq ($(TARGET_BASE_ARCH),$(TARGET_NAME))
-include $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.target
-endif
# Add the common build options
CFLAGS+=-Wall -O0 -g -fno-strict-aliasing
@@ -101,10 +99,7 @@ else
# are expected to provide their own build recipes.
-include $(SRC_PATH)/tests/tcg/minilib/Makefile.target
-include $(SRC_PATH)/tests/tcg/multiarch/system/Makefile.softmmu-target
--include $(SRC_PATH)/tests/tcg/$(TARGET_BASE_ARCH)/Makefile.softmmu-target
-ifneq ($(TARGET_BASE_ARCH),$(TARGET_NAME))
-include $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.softmmu-target
-endif
endif
@@ -2,12 +2,14 @@
#
# AArch64 specific tweaks
+ARM_SRC=$(SRC_PATH)/tests/tcg/arm
+VPATH += $(ARM_SRC)
+
AARCH64_SRC=$(SRC_PATH)/tests/tcg/aarch64
VPATH += $(AARCH64_SRC)
-# we don't build any of the ARM tests
-AARCH64_TESTS=$(filter-out $(ARM_TESTS), $(TESTS))
-AARCH64_TESTS+=fcvt
+# we don't build any other ARM test
+AARCH64_TESTS=fcvt
fcvt: LDFLAGS+=-lm
@@ -16,6 +18,6 @@ run-fcvt: fcvt
$(call diff-out,$<,$(AARCH64_SRC)/fcvt.ref)
AARCH64_TESTS += pauth-1 pauth-2
-run-pauth-%: QEMU += -cpu max
+run-pauth-%: QEMU_OPTS += -cpu max
-TESTS:=$(AARCH64_TESTS)
+TESTS += $(AARCH64_TESTS)
@@ -3,8 +3,6 @@
# ARM SoftMMU tests - included from tests/tcg/Makefile
#
-ifeq ($(TARGET_ABI_DIR),arm)
-
ARM_SRC=$(SRC_PATH)/tests/tcg/arm
# Set search path for all sources
@@ -25,5 +23,3 @@ LDFLAGS+=-nostdlib -N -static
test-armv6m-undef: EXTRA_CFLAGS+=-mcpu=cortex-m0
run-test-armv6m-undef: QEMU_OPTS+=-semihosting -M microbit -kernel
-
-endif
@@ -12,17 +12,9 @@ X64_SYSTEM_SRC=$(SRC_PATH)/tests/tcg/x86_64/system
# These objects provide the basic boot code and helper functions for all tests
CRT_OBJS=boot.o
-ifeq ($(TARGET_X86_64), y)
-CRT_PATH=$(X64_SYSTEM_SRC)
-CFLAGS=-march=x86-64
-LINK_SCRIPT=$(X64_SYSTEM_SRC)/kernel.ld
-LDFLAGS=-Wl,-T$(LINK_SCRIPT) -Wl,-melf_x86_64
-else
CRT_PATH=$(I386_SYSTEM_SRC)
-CFLAGS+=-m32
LINK_SCRIPT=$(I386_SYSTEM_SRC)/kernel.ld
LDFLAGS=-Wl,-T$(LINK_SCRIPT) -Wl,-melf_i386
-endif
CFLAGS+=-nostdlib -ggdb -O0 $(MINILIB_INC)
LDFLAGS+=-static -nostdlib $(CRT_OBJS) $(MINILIB_OBJS) -lgcc
@@ -6,14 +6,11 @@ I386_SRC=$(SRC_PATH)/tests/tcg/i386
VPATH += $(I386_SRC)
I386_SRCS=$(notdir $(wildcard $(I386_SRC)/*.c))
-I386_TESTS=$(I386_SRCS:.c=)
-I386_ONLY_TESTS=$(filter-out test-i386-ssse3, $(I386_TESTS))
+ALL_X86_TESTS=$(I386_SRCS:.c=)
+I386_TESTS:=$(filter-out test-i386-ssse3, $(ALL_X86_TESTS))
+X86_64_TESTS:=$(filter test-i386-ssse3, $(ALL_X86_TESTS))
# Update TESTS
-TESTS+=$(I386_ONLY_TESTS)
-
-ifneq ($(TARGET_NAME),x86_64)
-CFLAGS+=-m32
-endif
+TESTS=$(MULTIARCH_TESTS) $(I386_TESTS)
#
# hello-i386 is a barebones app
@@ -26,7 +23,7 @@ hello-i386: LDFLAGS+=-nostdlib
#
test-i386: test-i386.c test-i386-code16.S test-i386-vm86.S test-i386.h test-i386-shift.h test-i386-muldiv.h
- $(CC) $(CFLAGS) $(LDFLAGS) -o $@ \
+ $(CC) $(CFLAGS) $(LDFLAGS) $(EXTRA_CFLAGS) -o $@ \
$(<D)/test-i386.c $(<D)/test-i386-code16.S $(<D)/test-i386-vm86.S -lm
ifeq ($(SPEED), slow)
new file mode 100644
@@ -0,0 +1,36 @@
+#
+# x86 system tests
+#
+# This currently builds only for i386. The common C code is built
+# with standard compiler flags however so we can support both by
+# adding additional boot files for x86_64.
+#
+
+I386_SYSTEM_SRC=$(SRC_PATH)/tests/tcg/i386/system
+X64_SYSTEM_SRC=$(SRC_PATH)/tests/tcg/x86_64/system
+
+# These objects provide the basic boot code and helper functions for all tests
+CRT_OBJS=boot.o
+
+CRT_PATH=$(X64_SYSTEM_SRC)
+LINK_SCRIPT=$(X64_SYSTEM_SRC)/kernel.ld
+LDFLAGS=-Wl,-T$(LINK_SCRIPT) -Wl,-melf_x86_64
+CFLAGS+=-nostdlib -ggdb -O0 $(MINILIB_INC)
+LDFLAGS+=-static -nostdlib $(CRT_OBJS) $(MINILIB_OBJS) -lgcc
+
+TESTS+=$(MULTIARCH_TESTS)
+
+# building head blobs
+.PRECIOUS: $(CRT_OBJS)
+
+%.o: $(CRT_PATH)/%.S
+ $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c $< -o $@
+
+# Build and link the tests
+%: %.c $(LINK_SCRIPT) $(CRT_OBJS) $(MINILIB_OBJS)
+ $(CC) $(CFLAGS) $(EXTRA_CFLAGS) $< -o $@ $(LDFLAGS)
+
+memory: CFLAGS+=-DCHECK_UNALIGNED=1
+
+# Running
+QEMU_OPTS+=-device isa-debugcon,chardev=output -device isa-debug-exit,iobase=0xf4,iosize=0x4 -kernel
@@ -6,9 +6,10 @@
# $(SRC)/tests/tcg/i386/
#
-X86_64_TESTS=$(filter-out $(I386_ONLY_TESTS), $(TESTS))
-X86_64_TESTS+=test-x86_64
-TESTS:=$(X86_64_TESTS)
+include $(SRC_PATH)/tests/tcg/i386/Makefile.target
+
+TESTS=$(MULTIARCH_TESTS) $(X86_64_TESTS) test-x86_64
+QEMU_OPTS += -cpu max
test-x86_64: LDFLAGS+=-lm -lc
test-x86_64: test-i386.c test-i386.h test-i386-shift.h test-i386-muldiv.h