diff mbox series

[06/13] scsi: hisi_sas: Update all the registers after suspend and resume

Message ID 1567774537-20003-7-git-send-email-john.garry@huawei.com
State New
Headers show
Series hisi_sas: Some misc patches | expand

Commit Message

John Garry Sept. 6, 2019, 12:55 p.m. UTC 
From: Xiang Chen <chenxiang66@hisilicon.com>


After suspend and resume, the HW registers will be set back to their
initial value. We use init_reg_v3_hw() to set some registers, but some
registers are set via firmware in ACPI "_RST" method, so add reset
handler before init_reg_v3_hw().

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>

Signed-off-by: John Garry <john.garry@huawei.com>

---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 2adb5c93bd81..4c32088b9199 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3283,15 +3283,21 @@  static int hisi_sas_v3_resume(struct pci_dev *pdev)
 	pci_enable_wake(pdev, PCI_D0, 0);
 	pci_restore_state(pdev);
 	rc = pci_enable_device(pdev);
-	if (rc)
+	if (rc) {
 		dev_err(dev, "enable device failed during resume (%d)\n", rc);
+		return rc;
+	}
 
 	pci_set_master(pdev);
 	scsi_unblock_requests(shost);
 	clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
 
 	sas_prep_resume_ha(sha);
-	init_reg_v3_hw(hisi_hba);
+	rc = hw_init_v3_hw(hisi_hba);
+	if (rc) {
+		scsi_remove_host(shost);
+		pci_disable_device(pdev);
+	}
 	hisi_hba->hw->phys_init(hisi_hba);
 	sas_resume_ha(sha);
 	clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);