diff mbox

ARM: ux500: cut chip-select GPIOs from SSP device

Message ID 1369848742-10451-1-git-send-email-linus.walleij@stericsson.com
State Accepted
Commit 2a9c8faf9f95bd71a8e2699876f4fcf3c301df4b
Headers show

Commit Message

Linus Walleij May 29, 2013, 5:32 p.m. UTC 
From: Linus Walleij <linus.walleij@linaro.org>

What GPIO pin is used with which device on the SSP/SPI bus
is as board-specific as it gets, so it does not belong here
in the core SoC file, and it is disabled so it doesn't hurt
to delete this.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi | 5 -----
 1 file changed, 5 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index b4b542b..12f36d4 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -589,11 +589,6 @@ 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-
-			// Add one of these for each child device
-			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
-				    &gpio6 22 0x4 &gpio7 0 0x4>;
-
 		};
 
 		uart@80120000 {