diff mbox series

serial: sprd: Add loopback function support

Message ID 1275cd9968f1ceb5ac049cc23f1e508025cd552f.1566375260.git.baolin.wang@linaro.org
State Accepted
Commit 37ba760b6bb7402d8a8cce178063be78e3da474d
Headers show
Series serial: sprd: Add loopback function support | expand

Commit Message

(Exiting) Baolin Wang Aug. 21, 2019, 12:39 p.m. UTC 
Add loopback function support for Spreadtrum serial controller.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

---
 drivers/tty/serial/sprd_serial.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

-- 
1.7.9.5
diff mbox series

Patch

diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 73d71a4..85fc57c 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -79,6 +79,7 @@ 
 /* control register 1 */
 #define SPRD_CTL1		0x001C
 #define SPRD_DMA_EN		BIT(15)
+#define SPRD_LOOPBACK_EN	BIT(14)
 #define RX_HW_FLOW_CTL_THLD	BIT(6)
 #define RX_HW_FLOW_CTL_EN	BIT(7)
 #define TX_HW_FLOW_CTL_EN	BIT(8)
@@ -164,7 +165,14 @@  static unsigned int sprd_get_mctrl(struct uart_port *port)
 
 static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	/* nothing to do */
+	u32 val = serial_in(port, SPRD_CTL1);
+
+	if (mctrl & TIOCM_LOOP)
+		val |= SPRD_LOOPBACK_EN;
+	else
+		val &= ~SPRD_LOOPBACK_EN;
+
+	serial_out(port, SPRD_CTL1, val);
 }
 
 static void sprd_stop_rx(struct uart_port *port)