| Message ID | 20190814125012.8700-11-vkoul@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Wed 14 Aug 05:50 PDT 2019, Vinod Koul wrote: > Add the pon and adc nodes found in pm8150b PMIC. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/pm8150b.dtsi | 54 +++++++++++++++++++++++++++ > 1 file changed, 54 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi > index c0a678b0f159..846197bd65cd 100644 > --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi > @@ -2,6 +2,7 @@ > // Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. > // Copyright (c) 2019, Linaro Limited > > +#include <dt-bindings/iio/qcom,spmi-vadc.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/spmi/spmi.h> > > @@ -11,6 +12,59 @@ > reg = <0x2 SPMI_USID>; > #address-cells = <1>; > #size-cells = <0>; > + > + pon@800 { > + compatible = "qcom,pm8916-pon"; > + reg = <0x0800>; > + }; > + > + adc@3100 { > + compatible = "qcom,spmi-adc5"; > + reg = <0x3100>; > + #address-cells = <1>; > + #size-cells = <0>; > + #io-channel-cells = <1>; > + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > + > + ref-gnd@0 { > + reg = <ADC5_REF_GND>; > + qcom,pre-scaling = <1 1>; > + label = "ref_gnd"; > + }; > + > + vref-1p25@1 { > + reg = <ADC5_1P25VREF>; > + qcom,pre-scaling = <1 1>; > + label = "vref_1p25"; > + }; > + > + die-temp@6 { > + reg = <ADC5_DIE_TEMP>; > + qcom,pre-scaling = <1 1>; > + label = "die_temp"; > + }; > + > + chg-temp@9 { > + reg = <ADC5_CHG_TEMP>; > + qcom,pre-scaling = <1 1>; > + label = "chg_temp"; > + }; > + I believe the above items are internal, so it makes sense to keep them here, the below amux ones relates to board configuration so I think those should go in the board file. Regards, Bjorn > + smb1390-therm@14 { > + reg = <ADC5_AMUX_THM2>; > + qcom,hw-settle-time = <200>; > + qcom,pre-scaling = <1 1>; > + label = "smb1390_therm"; > + }; > + > + smb1355-therm@78 { > + reg = <ADC5_AMUX_THM2_100K_PU>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + qcom,pre-scaling = <1 1>; > + label = "smb1355_therm"; > + }; > + }; > }; > > qcom,pm8150@3 { > -- > 2.20.1 >
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index c0a678b0f159..846197bd65cd 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -2,6 +2,7 @@ // Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. // Copyright (c) 2019, Linaro Limited +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -11,6 +12,59 @@ reg = <0x2 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + }; + + adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + chg-temp@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + smb1390-therm@14 { + reg = <ADC5_AMUX_THM2>; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "smb1390_therm"; + }; + + smb1355-therm@78 { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "smb1355_therm"; + }; + }; }; qcom,pm8150@3 {
Add the pon and adc nodes found in pm8150b PMIC. Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 54 +++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) -- 2.20.1