@@ -2005,22 +2005,6 @@ F: drivers/*/*npcm*
F: Documentation/devicetree/bindings/*/*npcm*
F: Documentation/devicetree/bindings/*/*/*npcm*
-ARM/NUVOTON W90X900 ARM ARCHITECTURE
-M: Wan ZongShun <mcuos.com@gmail.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.mcuos.com
-S: Maintained
-F: arch/arm/mach-w90x900/
-F: drivers/input/keyboard/w90p910_keypad.c
-F: drivers/input/touchscreen/w90p910_ts.c
-F: drivers/watchdog/nuc900_wdt.c
-F: drivers/net/ethernet/nuvoton/w90p910_ether.c
-F: drivers/mtd/nand/raw/nuc900_nand.c
-F: drivers/rtc/rtc-nuc900.c
-F: drivers/spi/spi-nuc900.c
-F: drivers/usb/host/ehci-w90x900.c
-F: drivers/video/fbdev/nuc900fb.c
-
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
@@ -450,22 +450,6 @@ config ARCH_DOVE
help
Support for the Marvell Dove SoC 88AP510
-config ARCH_W90X900
- bool "Nuvoton W90X900 CPU"
- select CLKDEV_LOOKUP
- select CLKSRC_MMIO
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select GPIOLIB
- help
- Support for Nuvoton (Winbond logic dept.) ARM9 processor,
- At present, the w90x900 has been renamed nuc900, regarding
- the ARM series product line, you can login the following
- link address to know more.
-
- <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
- ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
-
config ARCH_LPC32XX
bool "NXP LPC32XX"
select ARM_AMBA
@@ -822,8 +806,6 @@ source "arch/arm/plat-versatile/Kconfig"
source "arch/arm/mach-vt8500/Kconfig"
-source "arch/arm/mach-w90x900/Kconfig"
-
source "arch/arm/mach-zx/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
@@ -221,7 +221,6 @@ machine-$(CONFIG_ARCH_U8500) += ux500
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
machine-$(CONFIG_ARCH_VT8500) += vt8500
-machine-$(CONFIG_ARCH_W90X900) += w90x900
machine-$(CONFIG_ARCH_ZX) += zx
machine-$(CONFIG_ARCH_ZYNQ) += zynq
machine-$(CONFIG_PLAT_SPEAR) += spear
deleted file mode 100644
@@ -1,51 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_USER_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_ARCH_W90X900=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRC32 is not set
deleted file mode 100644
@@ -1,67 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_USER_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_ARCH_W90X900=y
-# CONFIG_MACH_W90P910EVB is not set
-CONFIG_MACH_W90P950EVB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_NUC900=y
-CONFIG_GPM1040A0_320X240=y
-CONFIG_FB_NUC900_DEBUG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
deleted file mode 100644
@@ -1,57 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_USER_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_ARCH_W90X900=y
-# CONFIG_MACH_W90P910EVB is not set
-CONFIG_MACH_W90N960EVB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRC32 is not set
deleted file mode 100644
@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if ARCH_W90X900
-
-config CPU_W90P910
- bool
- help
- Support for W90P910 of Nuvoton W90X900 CPUs.
-
-config CPU_NUC950
- bool
- help
- Support for NUCP950 of Nuvoton NUC900 CPUs.
-
-config CPU_NUC960
- bool
- help
- Support for NUCP960 of Nuvoton NUC900 CPUs.
-
-menu "W90P910 Machines"
-
-config MACH_W90P910EVB
- bool "Nuvoton W90P910 Evaluation Board"
- default y
- select CPU_W90P910
- help
- Say Y here if you are using the Nuvoton W90P910EVB
-
-endmenu
-
-menu "NUC950 Machines"
-
-config MACH_W90P950EVB
- bool "Nuvoton NUC950 Evaluation Board"
- select CPU_NUC950
- help
- Say Y here if you are using the Nuvoton NUC950EVB
-
-endmenu
-
-menu "NUC960 Machines"
-
-config MACH_W90N960EVB
- bool "Nuvoton NUC960 Evaluation Board"
- select CPU_NUC960
- help
- Say Y here if you are using the Nuvoton NUC960EVB
-
-endmenu
-
-endif
deleted file mode 100644
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := irq.o time.o mfp.o gpio.o clock.o
-obj-y += clksel.o dev.o cpu.o
-# W90X900 CPU support files
-
-obj-$(CONFIG_CPU_W90P910) += nuc910.o
-obj-$(CONFIG_CPU_NUC950) += nuc950.o
-obj-$(CONFIG_CPU_NUC960) += nuc960.o
-
-# machine support
-
-obj-$(CONFIG_MACH_W90P910EVB) += mach-nuc910evb.o
-obj-$(CONFIG_MACH_W90P950EVB) += mach-nuc950evb.o
-obj-$(CONFIG_MACH_W90N960EVB) += mach-nuc960evb.o
deleted file mode 100644
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-
deleted file mode 100644
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/clksel.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-
-#define PLL0 0x00
-#define PLL1 0x01
-#define OTHER 0x02
-#define EXT 0x03
-#define MSOFFSET 0x0C
-#define ATAOFFSET 0x0a
-#define LCDOFFSET 0x06
-#define AUDOFFSET 0x04
-#define CPUOFFSET 0x00
-
-static DEFINE_MUTEX(clksel_sem);
-
-static void clock_source_select(const char *dev_id, unsigned int clkval)
-{
- unsigned int clksel, offset;
-
- clksel = __raw_readl(REG_CLKSEL);
-
- if (strcmp(dev_id, "nuc900-ms") == 0)
- offset = MSOFFSET;
- else if (strcmp(dev_id, "nuc900-atapi") == 0)
- offset = ATAOFFSET;
- else if (strcmp(dev_id, "nuc900-lcd") == 0)
- offset = LCDOFFSET;
- else if (strcmp(dev_id, "nuc900-ac97") == 0)
- offset = AUDOFFSET;
- else
- offset = CPUOFFSET;
-
- clksel &= ~(0x03 << offset);
- clksel |= (clkval << offset);
-
- __raw_writel(clksel, REG_CLKSEL);
-}
-
-void nuc900_clock_source(struct device *dev, unsigned char *src)
-{
- unsigned int clkval;
- const char *dev_id;
-
- BUG_ON(!src);
- clkval = 0;
-
- mutex_lock(&clksel_sem);
-
- if (dev)
- dev_id = dev_name(dev);
- else
- dev_id = "cpufreq";
-
- if (strcmp(src, "pll0") == 0)
- clkval = PLL0;
- else if (strcmp(src, "pll1") == 0)
- clkval = PLL1;
- else if (strcmp(src, "ext") == 0)
- clkval = EXT;
- else if (strcmp(src, "oth") == 0)
- clkval = OTHER;
-
- clock_source_select(dev_id, clkval);
-
- mutex_unlock(&clksel_sem);
-}
-EXPORT_SYMBOL(nuc900_clock_source);
-
deleted file mode 100644
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/clock.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include "clock.h"
-
-#define SUBCLK 0x24
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (clk->enabled++ == 0)
- (clk->enable)(clk, 1);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (!clk)
- return;
-
- WARN_ON(clk->enabled == 0);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->enabled == 0)
- (clk->enable)(clk, 0);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return 15000000;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void nuc900_clk_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->cken;
- unsigned long clken;
-
- clken = __raw_readl(W90X900_VA_CLKPWR);
-
- if (enable)
- clken |= clocks;
- else
- clken &= ~clocks;
-
- __raw_writel(clken, W90X900_VA_CLKPWR);
-}
-
-void nuc900_subclk_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->cken;
- unsigned long clken;
-
- clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
-
- if (enable)
- clken |= clocks;
- else
- clken &= ~clocks;
-
- __raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
-}
-
-/* dummy functions, should not be called */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- WARN_ON(clk);
- return 0;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- WARN_ON(clk);
- return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- WARN_ON(clk);
- return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- WARN_ON(clk);
- return NULL;
-}
-EXPORT_SYMBOL(clk_get_parent);
deleted file mode 100644
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/arm/mach-w90x900/clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/clkdev.h>
-
-void nuc900_clk_enable(struct clk *clk, int enable);
-void nuc900_subclk_enable(struct clk *clk, int enable);
-
-struct clk {
- unsigned long cken;
- unsigned int enabled;
- void (*enable)(struct clk *, int enable);
-};
-
-#define DEFINE_CLK(_name, _ctrlbit) \
-struct clk clk_##_name = { \
- .enable = nuc900_clk_enable, \
- .cken = (1 << _ctrlbit), \
- }
-
-#define DEFINE_SUBCLK(_name, _ctrlbit) \
-struct clk clk_##_name = { \
- .enable = nuc900_subclk_enable, \
- .cken = (1 << _ctrlbit), \
- }
-
-
-#define DEF_CLKLOOK(_clk, _devname, _conname) \
- { \
- .clk = _clk, \
- .dev_id = _devname, \
- .con_id = _conname, \
- }
-
deleted file mode 100644
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/cpu.c
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC900 series cpu common support
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-#include <mach/regs-clock.h>
-#include "regs-ebi.h"
-#include "regs-timer.h"
-
-#include "cpu.h"
-#include "clock.h"
-#include "nuc9xx.h"
-
-/* Initial IO mappings */
-
-static struct map_desc nuc900_iodesc[] __initdata = {
- IODESC_ENT(IRQ),
- IODESC_ENT(GCR),
- IODESC_ENT(UART),
- IODESC_ENT(TIMER),
- IODESC_ENT(EBI),
- IODESC_ENT(GPIO),
-};
-
-/* Initial clock declarations. */
-static DEFINE_CLK(lcd, 0);
-static DEFINE_CLK(audio, 1);
-static DEFINE_CLK(fmi, 4);
-static DEFINE_SUBCLK(ms, 0);
-static DEFINE_SUBCLK(sd, 1);
-static DEFINE_CLK(dmac, 5);
-static DEFINE_CLK(atapi, 6);
-static DEFINE_CLK(emc, 7);
-static DEFINE_SUBCLK(rmii, 2);
-static DEFINE_CLK(usbd, 8);
-static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);
-static DEFINE_CLK(pwm, 18);
-static DEFINE_CLK(ps2, 24);
-static DEFINE_CLK(kpi, 25);
-static DEFINE_CLK(wdt, 26);
-static DEFINE_CLK(gdma, 27);
-static DEFINE_CLK(adc, 28);
-static DEFINE_CLK(usi, 29);
-static DEFINE_CLK(ext, 0);
-static DEFINE_CLK(timer0, 19);
-static DEFINE_CLK(timer1, 20);
-static DEFINE_CLK(timer2, 21);
-static DEFINE_CLK(timer3, 22);
-static DEFINE_CLK(timer4, 23);
-
-static struct clk_lookup nuc900_clkregs[] = {
- DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
- DEF_CLKLOOK(&clk_audio, "nuc900-ac97", NULL),
- DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
- DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
- DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
- DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
- DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
- DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
- DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
- DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
- DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
- DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
- DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
- DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
- DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
- DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
- DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
- DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
- DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
- DEF_CLKLOOK(&clk_ext, NULL, "ext"),
- DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
- DEF_CLKLOOK(&clk_timer1, NULL, "timer1"),
- DEF_CLKLOOK(&clk_timer2, NULL, "timer2"),
- DEF_CLKLOOK(&clk_timer3, NULL, "timer3"),
- DEF_CLKLOOK(&clk_timer4, NULL, "timer4"),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port nuc900_uart_data[] = {
- NUC900_8250PORT(UART0),
- {},
-};
-
-struct platform_device nuc900_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = nuc900_uart_data,
- },
-};
-
-/*Set NUC900 series cpu frequence*/
-static int __init nuc900_set_clkval(unsigned int cpufreq)
-{
- unsigned int pllclk, ahbclk, apbclk, val;
-
- pllclk = 0;
- ahbclk = 0;
- apbclk = 0;
-
- switch (cpufreq) {
- case 66:
- pllclk = PLL_66MHZ;
- ahbclk = AHB_CPUCLK_1_1;
- apbclk = APB_AHB_1_2;
- break;
-
- case 100:
- pllclk = PLL_100MHZ;
- ahbclk = AHB_CPUCLK_1_1;
- apbclk = APB_AHB_1_2;
- break;
-
- case 120:
- pllclk = PLL_120MHZ;
- ahbclk = AHB_CPUCLK_1_2;
- apbclk = APB_AHB_1_2;
- break;
-
- case 166:
- pllclk = PLL_166MHZ;
- ahbclk = AHB_CPUCLK_1_2;
- apbclk = APB_AHB_1_2;
- break;
-
- case 200:
- pllclk = PLL_200MHZ;
- ahbclk = AHB_CPUCLK_1_2;
- apbclk = APB_AHB_1_2;
- break;
- }
-
- __raw_writel(pllclk, REG_PLLCON0);
-
- val = __raw_readl(REG_CLKDIV);
- val &= ~(0x03 << 24 | 0x03 << 26);
- val |= (ahbclk << 24 | apbclk << 26);
- __raw_writel(val, REG_CLKDIV);
-
- return 0;
-}
-static int __init nuc900_set_cpufreq(char *str)
-{
- unsigned long cpufreq, val;
-
- if (!*str)
- return 0;
-
- if (kstrtoul(str, 0, &cpufreq))
- return 0;
-
- nuc900_clock_source(NULL, "ext");
-
- nuc900_set_clkval(cpufreq);
-
- mdelay(1);
-
- val = __raw_readl(REG_CKSKEW);
- val &= ~0xff;
- val |= DEFAULTSKEW;
- __raw_writel(val, REG_CKSKEW);
-
- nuc900_clock_source(NULL, "pll0");
-
- return 1;
-}
-
-__setup("cpufreq=", nuc900_set_cpufreq);
-
-/*Init NUC900 evb io*/
-
-void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
-{
- unsigned long idcode = 0x0;
-
- iotable_init(mach_desc, mach_size);
- iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
-
- idcode = __raw_readl(NUC900PDID);
- if (idcode == NUC910_CPUID)
- printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
- else if (idcode == NUC920_CPUID)
- printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
- else if (idcode == NUC950_CPUID)
- printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
- else if (idcode == NUC960_CPUID)
- printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
-}
-
-/*Init NUC900 clock*/
-
-void __init nuc900_init_clocks(void)
-{
- clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
-}
-
-#define WTCR (TMR_BA + 0x1C)
-#define WTCLK (1 << 10)
-#define WTE (1 << 7)
-#define WTRE (1 << 1)
-
-void nuc9xx_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode == REBOOT_SOFT) {
- /* Jump into ROM at address 0 */
- soft_restart(0);
- } else {
- __raw_writel(WTE | WTRE | WTCLK, WTCR);
- }
-}
deleted file mode 100644
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/cpu.h
- *
- * Based on linux/include/asm-arm/plat-s3c24xx/cpu.h by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#define IODESC_ENT(y) \
-{ \
- .virtual = (unsigned long)W90X900_VA_##y, \
- .pfn = __phys_to_pfn(W90X900_PA_##y), \
- .length = W90X900_SZ_##y, \
- .type = MT_DEVICE, \
-}
-
-#define NUC900_8250PORT(name) \
-{ \
- .membase = name##_BA, \
- .mapbase = name##_PA, \
- .irq = IRQ_##name, \
- .uartclk = 11313600, \
- .regshift = 2, \
- .iotype = UPIO_MEM, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
-}
-
-/*Cpu identifier register*/
-
-#define NUC900PDID W90X900_VA_GCR
-#define NUC910_CPUID 0x02900910
-#define NUC920_CPUID 0x02900920
-#define NUC950_CPUID 0x02900950
-#define NUC960_CPUID 0x02900960
-
-/* extern file from cpu.c */
-
-extern void nuc900_clock_source(struct device *dev, unsigned char *src);
-extern void nuc900_init_clocks(void);
-extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
-extern void nuc900_board_init(struct platform_device **device, int size);
-
-/* for either public between 910 and 920, or between 920 and 950 */
-
-extern struct platform_device nuc900_serial_device;
-extern struct platform_device nuc900_device_fmi;
-extern struct platform_device nuc900_device_kpi;
-extern struct platform_device nuc900_device_rtc;
-extern struct platform_device nuc900_device_ts;
-extern struct platform_device nuc900_device_lcd;
deleted file mode 100644
@@ -1,537 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/dev.c
- *
- * Copyright (C) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/cpu.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <linux/platform_data/spi-nuc900.h>
-#include <mach/map.h>
-#include <linux/platform_data/video-nuc900fb.h>
-#include <mach/regs-ldm.h>
-#include <linux/platform_data/keypad-w90p910.h>
-
-#include "cpu.h"
-
-/*NUC900 evb norflash driver data */
-
-#define NUC900_FLASH_BASE 0xA0000000
-#define NUC900_FLASH_SIZE 0x400000
-#define SPIOFFSET 0x200
-#define SPIOREG_SIZE 0x100
-
-static struct mtd_partition nuc900_flash_partitions[] = {
- {
- .name = "NOR Partition 1 for kernel (960K)",
- .size = 0xF0000,
- .offset = 0x10000,
- },
- {
- .name = "NOR Partition 2 for image (1M)",
- .size = 0x100000,
- .offset = 0x100000,
- },
- {
- .name = "NOR Partition 3 for user (2M)",
- .size = 0x200000,
- .offset = 0x00200000,
- }
-};
-
-static struct physmap_flash_data nuc900_flash_data = {
- .width = 2,
- .parts = nuc900_flash_partitions,
- .nr_parts = ARRAY_SIZE(nuc900_flash_partitions),
-};
-
-static struct resource nuc900_flash_resources[] = {
- {
- .start = NUC900_FLASH_BASE,
- .end = NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nuc900_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nuc900_flash_data,
- },
- .resource = nuc900_flash_resources,
- .num_resources = ARRAY_SIZE(nuc900_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource nuc900_usb_ehci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBEHCIHOST,
- .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-static struct platform_device nuc900_device_usb_ehci = {
- .name = "nuc900-ehci",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_usb_ehci_resource),
- .resource = nuc900_usb_ehci_resource,
- .dev = {
- .dma_mask = &nuc900_device_usb_ehci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-/* USB OHCI Host Controller */
-
-static struct resource nuc900_usb_ohci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBOHCIHOST,
- .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
-static struct platform_device nuc900_device_usb_ohci = {
- .name = "nuc900-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_usb_ohci_resource),
- .resource = nuc900_usb_ohci_resource,
- .dev = {
- .dma_mask = &nuc900_device_usb_ohci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-/* USB Device (Gadget)*/
-
-static struct resource nuc900_usbgadget_resource[] = {
- [0] = {
- .start = W90X900_PA_USBDEV,
- .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device nuc900_device_usbgadget = {
- .name = "nuc900-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_usbgadget_resource),
- .resource = nuc900_usbgadget_resource,
-};
-
-/* MAC device */
-
-static struct resource nuc900_emc_resource[] = {
- [0] = {
- .start = W90X900_PA_EMC,
- .end = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EMCTX,
- .end = IRQ_EMCTX,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_EMCRX,
- .end = IRQ_EMCRX,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
-static struct platform_device nuc900_device_emc = {
- .name = "nuc900-emc",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_emc_resource),
- .resource = nuc900_emc_resource,
- .dev = {
- .dma_mask = &nuc900_device_emc_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-/* SPI device */
-
-static struct nuc900_spi_info nuc900_spiflash_data = {
- .num_cs = 1,
- .lsb = 0,
- .txneg = 1,
- .rxneg = 0,
- .divider = 24,
- .sleep = 0,
- .txnum = 0,
- .txbitlen = 8,
- .bus_num = 0,
-};
-
-static struct resource nuc900_spi_resource[] = {
- [0] = {
- .start = W90X900_PA_I2C + SPIOFFSET,
- .end = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SSP,
- .end = IRQ_SSP,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device nuc900_device_spi = {
- .name = "nuc900-spi",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_spi_resource),
- .resource = nuc900_spi_resource,
- .dev = {
- .platform_data = &nuc900_spiflash_data,
- }
-};
-
-/* spi device, spi flash info */
-
-static struct mtd_partition nuc900_spi_flash_partitions[] = {
- {
- .name = "bootloader(spi)",
- .size = 0x0100000,
- .offset = 0,
- },
-};
-
-static struct flash_platform_data nuc900_spi_flash_data = {
- .name = "m25p80",
- .parts = nuc900_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
- .type = "w25x16",
-};
-
-static struct spi_board_info nuc900_spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = &nuc900_spi_flash_data,
- .mode = SPI_MODE_0,
- },
-};
-
-/* WDT Device */
-
-static struct resource nuc900_wdt_resource[] = {
- [0] = {
- .start = W90X900_PA_TIMER,
- .end = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_WDT,
- .end = IRQ_WDT,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device nuc900_device_wdt = {
- .name = "nuc900-wdt",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_wdt_resource),
- .resource = nuc900_wdt_resource,
-};
-
-/*
- * public device definition between 910 and 920, or 910
- * and 950 or 950 and 960...,their dev platform register
- * should be in specific file such as nuc950, nuc960 c
- * files rather than the public dev.c file here. so the
- * corresponding platform_device definition should not be
- * static.
-*/
-
-/* RTC controller*/
-
-static struct resource nuc900_rtc_resource[] = {
- [0] = {
- .start = W90X900_PA_RTC,
- .end = W90X900_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device nuc900_device_rtc = {
- .name = "nuc900-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_rtc_resource),
- .resource = nuc900_rtc_resource,
-};
-
-/*TouchScreen controller*/
-
-static struct resource nuc900_ts_resource[] = {
- [0] = {
- .start = W90X900_PA_ADC,
- .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ADC,
- .end = IRQ_ADC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device nuc900_device_ts = {
- .name = "nuc900-ts",
- .id = -1,
- .resource = nuc900_ts_resource,
- .num_resources = ARRAY_SIZE(nuc900_ts_resource),
-};
-
-/* FMI Device */
-
-static struct resource nuc900_fmi_resource[] = {
- [0] = {
- .start = W90X900_PA_FMI,
- .end = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_FMI,
- .end = IRQ_FMI,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device nuc900_device_fmi = {
- .name = "nuc900-fmi",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_fmi_resource),
- .resource = nuc900_fmi_resource,
-};
-
-/* KPI controller*/
-
-static int nuc900_keymap[] = {
- KEY(0, 0, KEY_A),
- KEY(0, 1, KEY_B),
- KEY(0, 2, KEY_C),
- KEY(0, 3, KEY_D),
-
- KEY(1, 0, KEY_E),
- KEY(1, 1, KEY_F),
- KEY(1, 2, KEY_G),
- KEY(1, 3, KEY_H),
-
- KEY(2, 0, KEY_I),
- KEY(2, 1, KEY_J),
- KEY(2, 2, KEY_K),
- KEY(2, 3, KEY_L),
-
- KEY(3, 0, KEY_M),
- KEY(3, 1, KEY_N),
- KEY(3, 2, KEY_O),
- KEY(3, 3, KEY_P),
-};
-
-static struct matrix_keymap_data nuc900_map_data = {
- .keymap = nuc900_keymap,
- .keymap_size = ARRAY_SIZE(nuc900_keymap),
-};
-
-struct w90p910_keypad_platform_data nuc900_keypad_info = {
- .keymap_data = &nuc900_map_data,
- .prescale = 0xfa,
- .debounce = 0x50,
-};
-
-static struct resource nuc900_kpi_resource[] = {
- [0] = {
- .start = W90X900_PA_KPI,
- .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KPI,
- .end = IRQ_KPI,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device nuc900_device_kpi = {
- .name = "nuc900-kpi",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_kpi_resource),
- .resource = nuc900_kpi_resource,
- .dev = {
- .platform_data = &nuc900_keypad_info,
- }
-};
-
-/* LCD controller*/
-
-static struct nuc900fb_display nuc900_lcd_info[] = {
- /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
- [0] = {
- .type = LCM_DCCS_VA_SRC_RGB565,
- .width = 320,
- .height = 240,
- .xres = 320,
- .yres = 240,
- .bpp = 16,
- .pixclock = 200000,
- .left_margin = 34,
- .right_margin = 54,
- .hsync_len = 10,
- .upper_margin = 18,
- .lower_margin = 4,
- .vsync_len = 1,
- .dccs = 0x8e00041a,
- .devctl = 0x060800c0,
- .fbctrl = 0x00a000a0,
- .scale = 0x04000400,
- },
-};
-
-static struct nuc900fb_mach_info nuc900_fb_info = {
-#if defined(CONFIG_GPM1040A0_320X240)
- .displays = &nuc900_lcd_info[0],
-#else
- .displays = nuc900_lcd_info,
-#endif
- .num_displays = ARRAY_SIZE(nuc900_lcd_info),
- .default_display = 0,
- .gpio_dir = 0x00000004,
- .gpio_dir_mask = 0xFFFFFFFD,
- .gpio_data = 0x00000004,
- .gpio_data_mask = 0xFFFFFFFD,
-};
-
-static struct resource nuc900_lcd_resource[] = {
- [0] = {
- .start = W90X900_PA_LCD,
- .end = W90X900_PA_LCD + W90X900_SZ_LCD - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_LCD,
- .end = IRQ_LCD,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 nuc900_device_lcd_dmamask = -1;
-struct platform_device nuc900_device_lcd = {
- .name = "nuc900-lcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_lcd_resource),
- .resource = nuc900_lcd_resource,
- .dev = {
- .dma_mask = &nuc900_device_lcd_dmamask,
- .coherent_dma_mask = -1,
- .platform_data = &nuc900_fb_info,
- }
-};
-
-/* AUDIO controller*/
-static u64 nuc900_device_audio_dmamask = -1;
-static struct resource nuc900_ac97_resource[] = {
- [0] = {
- .start = W90X900_PA_ACTL,
- .end = W90X900_PA_ACTL + W90X900_SZ_ACTL - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ACTL,
- .end = IRQ_ACTL,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device nuc900_device_ac97 = {
- .name = "nuc900-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(nuc900_ac97_resource),
- .resource = nuc900_ac97_resource,
- .dev = {
- .dma_mask = &nuc900_device_audio_dmamask,
- .coherent_dma_mask = -1,
- }
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *nuc900_public_dev[] __initdata = {
- &nuc900_serial_device,
- &nuc900_flash_device,
- &nuc900_device_usb_ehci,
- &nuc900_device_usb_ohci,
- &nuc900_device_usbgadget,
- &nuc900_device_emc,
- &nuc900_device_spi,
- &nuc900_device_wdt,
- &nuc900_device_ac97,
-};
-
-/* Provide adding specific CPU platform devices API */
-
-void __init nuc900_board_init(struct platform_device **device, int size)
-{
- cpu_idle_poll_ctrl(true);
- platform_add_devices(device, size);
- platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
- spi_register_board_info(nuc900_spi_board_info,
- ARRAY_SIZE(nuc900_spi_board_info));
-}
-
deleted file mode 100644
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/gpio.c
- *
- * Generic nuc900 GPIO handling
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/gpio/driver.h>
-
-#include <mach/hardware.h>
-
-#define GPIO_BASE (W90X900_VA_GPIO)
-#define GPIO_DIR (0x04)
-#define GPIO_OUT (0x08)
-#define GPIO_IN (0x0C)
-#define GROUPINERV (0x10)
-#define GPIO_GPIO(Nb) (0x00000001 << (Nb))
-
-#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio) \
- { \
- .chip = { \
- .label = name, \
- .direction_input = nuc900_dir_input, \
- .direction_output = nuc900_dir_output, \
- .get = nuc900_gpio_get, \
- .set = nuc900_gpio_set, \
- .base = base_gpio, \
- .ngpio = nr_gpio, \
- } \
- }
-
-struct nuc900_gpio_chip {
- struct gpio_chip chip;
- void __iomem *regbase; /* Base of group register*/
- spinlock_t gpio_lock;
-};
-
-static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
- void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
- unsigned int regval;
-
- regval = __raw_readl(pio);
- regval &= GPIO_GPIO(offset);
-
- return (regval != 0);
-}
-
-static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
- struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
- void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
- unsigned int regval;
- unsigned long flags;
-
- spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
-
- regval = __raw_readl(pio);
-
- if (val)
- regval |= GPIO_GPIO(offset);
- else
- regval &= ~GPIO_GPIO(offset);
-
- __raw_writel(regval, pio);
-
- spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
-}
-
-static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
-{
- struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
- void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
- unsigned int regval;
- unsigned long flags;
-
- spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
-
- regval = __raw_readl(pio);
- regval &= ~GPIO_GPIO(offset);
- __raw_writel(regval, pio);
-
- spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
-
- return 0;
-}
-
-static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
-{
- struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
- void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
- void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
- unsigned int regval;
- unsigned long flags;
-
- spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
-
- regval = __raw_readl(pio);
- regval |= GPIO_GPIO(offset);
- __raw_writel(regval, pio);
-
- regval = __raw_readl(outreg);
-
- if (val)
- regval |= GPIO_GPIO(offset);
- else
- regval &= ~GPIO_GPIO(offset);
-
- __raw_writel(regval, outreg);
-
- spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
-
- return 0;
-}
-
-static struct nuc900_gpio_chip nuc900_gpio[] = {
- NUC900_GPIO_CHIP("GROUPC", 0, 16),
- NUC900_GPIO_CHIP("GROUPD", 16, 10),
- NUC900_GPIO_CHIP("GROUPE", 26, 14),
- NUC900_GPIO_CHIP("GROUPF", 40, 10),
- NUC900_GPIO_CHIP("GROUPG", 50, 17),
- NUC900_GPIO_CHIP("GROUPH", 67, 8),
- NUC900_GPIO_CHIP("GROUPI", 75, 17),
-};
-
-void __init nuc900_init_gpio(int nr_group)
-{
- unsigned i;
- struct nuc900_gpio_chip *gpio_chip;
-
- for (i = 0; i < nr_group; i++) {
- gpio_chip = &nuc900_gpio[i];
- spin_lock_init(&gpio_chip->gpio_lock);
- gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
- gpiochip_add_data(&gpio_chip->chip, gpio_chip);
- }
-}
deleted file mode 100644
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for W90P910-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- */
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #AIC_BA
-
- ldr \irqnr, [\base, #AIC_IPER]
- ldr \irqnr, [\base, #AIC_ISNR]
- cmp \irqnr, #0
-
- .endm
deleted file mode 100644
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-w90x900/include/mach/hardware.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/hardware.h
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <linux/sizes.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_HARDWARE_H */
deleted file mode 100644
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/include/mach/irqs.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/irqs.h
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/*
- * we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- */
-
-#define W90X900_IRQ(x) (x)
-
-/* Main cpu interrupts */
-
-#define IRQ_WDT W90X900_IRQ(1)
-#define IRQ_GROUP0 W90X900_IRQ(2)
-#define IRQ_GROUP1 W90X900_IRQ(3)
-#define IRQ_ACTL W90X900_IRQ(4)
-#define IRQ_LCD W90X900_IRQ(5)
-#define IRQ_RTC W90X900_IRQ(6)
-#define IRQ_UART0 W90X900_IRQ(7)
-#define IRQ_UART1 W90X900_IRQ(8)
-#define IRQ_UART2 W90X900_IRQ(9)
-#define IRQ_UART3 W90X900_IRQ(10)
-#define IRQ_UART4 W90X900_IRQ(11)
-#define IRQ_TIMER0 W90X900_IRQ(12)
-#define IRQ_TIMER1 W90X900_IRQ(13)
-#define IRQ_T_INT_GROUP W90X900_IRQ(14)
-#define IRQ_USBH W90X900_IRQ(15)
-#define IRQ_EMCTX W90X900_IRQ(16)
-#define IRQ_EMCRX W90X900_IRQ(17)
-#define IRQ_GDMAGROUP W90X900_IRQ(18)
-#define IRQ_DMAC W90X900_IRQ(19)
-#define IRQ_FMI W90X900_IRQ(20)
-#define IRQ_USBD W90X900_IRQ(21)
-#define IRQ_ATAPI W90X900_IRQ(22)
-#define IRQ_G2D W90X900_IRQ(23)
-#define IRQ_PCI W90X900_IRQ(24)
-#define IRQ_SCGROUP W90X900_IRQ(25)
-#define IRQ_I2CGROUP W90X900_IRQ(26)
-#define IRQ_SSP W90X900_IRQ(27)
-#define IRQ_PWM W90X900_IRQ(28)
-#define IRQ_KPI W90X900_IRQ(29)
-#define IRQ_P2SGROUP W90X900_IRQ(30)
-#define IRQ_ADC W90X900_IRQ(31)
-#define NR_IRQS (IRQ_ADC+1)
-
-/*for irq group*/
-
-#define IRQ_PS2_PORT0 0x10000000
-#define IRQ_PS2_PORT1 0x20000000
-#define IRQ_I2C_LINE0 0x04000000
-#define IRQ_I2C_LINE1 0x08000000
-#define IRQ_SC_CARD0 0x01000000
-#define IRQ_SC_CARD1 0x02000000
-#define IRQ_GDMA_CH0 0x00100000
-#define IRQ_GDMA_CH1 0x00200000
-#define IRQ_TIMER2 0x00010000
-#define IRQ_TIMER3 0x00020000
-#define IRQ_TIMER4 0x00040000
-#define IRQ_GROUP0_IRQ0 0x00000001
-#define IRQ_GROUP0_IRQ1 0x00000002
-#define IRQ_GROUP0_IRQ2 0x00000004
-#define IRQ_GROUP0_IRQ3 0x00000008
-#define IRQ_GROUP1_IRQ4 0x00000010
-#define IRQ_GROUP1_IRQ5 0x00000020
-#define IRQ_GROUP1_IRQ6 0x00000040
-#define IRQ_GROUP1_IRQ7 0x00000080
-
-#endif /* __ASM_ARCH_IRQ_H */
deleted file mode 100644
@@ -1,153 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/include/mach/map.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/map.h
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#ifndef __ASSEMBLY__
-#define W90X900_ADDR(x) ((void __iomem *)(0xF0000000 + (x)))
-#else
-#define W90X900_ADDR(x) (0xF0000000 + (x))
-#endif
-
-#define AHB_IO_BASE 0xB0000000
-#define APB_IO_BASE 0xB8000000
-#define CLOCKPW_BASE (APB_IO_BASE+0x200)
-#define AIC_IO_BASE (APB_IO_BASE+0x2000)
-#define TIMER_IO_BASE (APB_IO_BASE+0x1000)
-
-/*
- * interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define W90X900_VA_IRQ W90X900_ADDR(0x00000000)
-#define W90X900_PA_IRQ (0xB8002000)
-#define W90X900_SZ_IRQ SZ_4K
-
-#define W90X900_VA_GCR W90X900_ADDR(0x08002000)
-#define W90X900_PA_GCR (0xB0000000)
-#define W90X900_SZ_GCR SZ_4K
-
-/* Clock and Power management */
-#define W90X900_VA_CLKPWR (W90X900_VA_GCR+0x200)
-#define W90X900_PA_CLKPWR (0xB0000200)
-#define W90X900_SZ_CLKPWR SZ_4K
-
-/* EBI management */
-#define W90X900_VA_EBI W90X900_ADDR(0x00001000)
-#define W90X900_PA_EBI (0xB0001000)
-#define W90X900_SZ_EBI SZ_4K
-
-/* UARTs */
-#define W90X900_VA_UART W90X900_ADDR(0x08000000)
-#define W90X900_PA_UART (0xB8000000)
-#define W90X900_SZ_UART SZ_4K
-
-/* Timers */
-#define W90X900_VA_TIMER W90X900_ADDR(0x08001000)
-#define W90X900_PA_TIMER (0xB8001000)
-#define W90X900_SZ_TIMER SZ_4K
-
-/* GPIO ports */
-#define W90X900_VA_GPIO W90X900_ADDR(0x08003000)
-#define W90X900_PA_GPIO (0xB8003000)
-#define W90X900_SZ_GPIO SZ_4K
-
-/* GDMA control */
-#define W90X900_VA_GDMA W90X900_ADDR(0x00004000)
-#define W90X900_PA_GDMA (0xB0004000)
-#define W90X900_SZ_GDMA SZ_4K
-
-/* USB host controller*/
-#define W90X900_VA_USBEHCIHOST W90X900_ADDR(0x00005000)
-#define W90X900_PA_USBEHCIHOST (0xB0005000)
-#define W90X900_SZ_USBEHCIHOST SZ_4K
-
-#define W90X900_VA_USBOHCIHOST W90X900_ADDR(0x00007000)
-#define W90X900_PA_USBOHCIHOST (0xB0007000)
-#define W90X900_SZ_USBOHCIHOST SZ_4K
-
-/* I2C hardware controller */
-#define W90X900_VA_I2C W90X900_ADDR(0x08006000)
-#define W90X900_PA_I2C (0xB8006000)
-#define W90X900_SZ_I2C SZ_4K
-
-/* Keypad Interface*/
-#define W90X900_VA_KPI W90X900_ADDR(0x08008000)
-#define W90X900_PA_KPI (0xB8008000)
-#define W90X900_SZ_KPI SZ_4K
-
-/* Smart card host*/
-#define W90X900_VA_SC W90X900_ADDR(0x08005000)
-#define W90X900_PA_SC (0xB8005000)
-#define W90X900_SZ_SC SZ_4K
-
-/* LCD controller*/
-#define W90X900_VA_LCD W90X900_ADDR(0x00008000)
-#define W90X900_PA_LCD (0xB0008000)
-#define W90X900_SZ_LCD SZ_4K
-
-/* 2D controller*/
-#define W90X900_VA_GE W90X900_ADDR(0x0000B000)
-#define W90X900_PA_GE (0xB000B000)
-#define W90X900_SZ_GE SZ_4K
-
-/* ATAPI */
-#define W90X900_VA_ATAPI W90X900_ADDR(0x0000A000)
-#define W90X900_PA_ATAPI (0xB000A000)
-#define W90X900_SZ_ATAPI SZ_4K
-
-/* ADC */
-#define W90X900_VA_ADC W90X900_ADDR(0x0800A000)
-#define W90X900_PA_ADC (0xB800A000)
-#define W90X900_SZ_ADC SZ_4K
-
-/* PS2 Interface*/
-#define W90X900_VA_PS2 W90X900_ADDR(0x08009000)
-#define W90X900_PA_PS2 (0xB8009000)
-#define W90X900_SZ_PS2 SZ_4K
-
-/* RTC */
-#define W90X900_VA_RTC W90X900_ADDR(0x08004000)
-#define W90X900_PA_RTC (0xB8004000)
-#define W90X900_SZ_RTC SZ_4K
-
-/* Pulse Width Modulation(PWM) Registers */
-#define W90X900_VA_PWM W90X900_ADDR(0x08007000)
-#define W90X900_PA_PWM (0xB8007000)
-#define W90X900_SZ_PWM SZ_4K
-
-/* Audio Controller controller */
-#define W90X900_VA_ACTL W90X900_ADDR(0x00009000)
-#define W90X900_PA_ACTL (0xB0009000)
-#define W90X900_SZ_ACTL SZ_4K
-
-/* DMA controller */
-#define W90X900_VA_DMA W90X900_ADDR(0x0000c000)
-#define W90X900_PA_DMA (0xB000c000)
-#define W90X900_SZ_DMA SZ_4K
-
-/* FMI controller */
-#define W90X900_VA_FMI W90X900_ADDR(0x0000d000)
-#define W90X900_PA_FMI (0xB000d000)
-#define W90X900_SZ_FMI SZ_4K
-
-/* USB Device port */
-#define W90X900_VA_USBDEV W90X900_ADDR(0x00006000)
-#define W90X900_PA_USBDEV (0xB0006000)
-#define W90X900_SZ_USBDEV SZ_4K
-
-/* External MAC control*/
-#define W90X900_VA_EMC W90X900_ADDR(0x00003000)
-#define W90X900_PA_EMC (0xB0003000)
-#define W90X900_SZ_EMC SZ_4K
-
-#endif /* __ASM_ARCH_MAP_H */
deleted file mode 100644
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/include/mach/mfp.h
- *
- * Copyright (c) 2010 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/map.h
- */
-
-#ifndef __ASM_ARCH_MFP_H
-#define __ASM_ARCH_MFP_H
-
-extern void mfp_set_groupf(struct device *dev);
-extern void mfp_set_groupc(struct device *dev);
-extern void mfp_set_groupi(struct device *dev);
-extern void mfp_set_groupg(struct device *dev, const char *subname);
-extern void mfp_set_groupd(struct device *dev, const char *subname);
-
-#endif /* __ASM_ARCH_MFP_H */
deleted file mode 100644
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/include/mach/regs-clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H
-
-/* Clock Control Registers */
-#define CLK_BA W90X900_VA_CLKPWR
-#define REG_CLKEN (CLK_BA + 0x00)
-#define REG_CLKSEL (CLK_BA + 0x04)
-#define REG_CLKDIV (CLK_BA + 0x08)
-#define REG_PLLCON0 (CLK_BA + 0x0C)
-#define REG_PLLCON1 (CLK_BA + 0x10)
-#define REG_PMCON (CLK_BA + 0x14)
-#define REG_IRQWAKECON (CLK_BA + 0x18)
-#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
-#define REG_IPSRST (CLK_BA + 0x20)
-#define REG_CLKEN1 (CLK_BA + 0x24)
-#define REG_CLKDIV1 (CLK_BA + 0x28)
-
-/* Define PLL freq setting */
-#define PLL_DISABLE 0x12B63
-#define PLL_66MHZ 0x2B63
-#define PLL_100MHZ 0x4F64
-#define PLL_120MHZ 0x4F63
-#define PLL_166MHZ 0x4124
-#define PLL_200MHZ 0x4F24
-
-/* Define AHB:CPUFREQ ratio */
-#define AHB_CPUCLK_1_1 0x00
-#define AHB_CPUCLK_1_2 0x01
-#define AHB_CPUCLK_1_4 0x02
-#define AHB_CPUCLK_1_8 0x03
-
-/* Define APB:AHB ratio */
-#define APB_AHB_1_2 0x01
-#define APB_AHB_1_4 0x02
-#define APB_AHB_1_8 0x03
-
-/* Define clock skew */
-#define DEFAULTSKEW 0x48
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
deleted file mode 100644
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-w90x900/include/mach/regs-irq.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/regs-irq.h
- */
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H
-
-/* Advance Interrupt Controller (AIC) Registers */
-
-#define AIC_BA W90X900_VA_IRQ
-
-#define REG_AIC_IRQSC (AIC_BA+0x80)
-#define REG_AIC_GEN (AIC_BA+0x84)
-#define REG_AIC_GASR (AIC_BA+0x88)
-#define REG_AIC_GSCR (AIC_BA+0x8C)
-#define REG_AIC_IRSR (AIC_BA+0x100)
-#define REG_AIC_IASR (AIC_BA+0x104)
-#define REG_AIC_ISR (AIC_BA+0x108)
-#define REG_AIC_IPER (AIC_BA+0x10C)
-#define REG_AIC_ISNR (AIC_BA+0x110)
-#define REG_AIC_IMR (AIC_BA+0x114)
-#define REG_AIC_OISR (AIC_BA+0x118)
-#define REG_AIC_MECR (AIC_BA+0x120)
-#define REG_AIC_MDCR (AIC_BA+0x124)
-#define REG_AIC_SSCR (AIC_BA+0x128)
-#define REG_AIC_SCCR (AIC_BA+0x12C)
-#define REG_AIC_EOSCR (AIC_BA+0x130)
-#define AIC_IPER (0x10C)
-#define AIC_ISNR (0x110)
-
-/*16-18 bits of REG_AIC_GEN define irq(2-4) group*/
-
-#define TIMER2_IRQ (1 << 16)
-#define TIMER3_IRQ (1 << 17)
-#define TIMER4_IRQ (1 << 18)
-#define TIME_GROUP_IRQ (TIMER2_IRQ|TIMER3_IRQ|TIMER4_IRQ)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
deleted file mode 100644
@@ -1,248 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-w90x900/include/mach/regs-serial.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation
- * All rights reserved.
- *
- * Description:
- * Nuvoton Display, LCM Register list
- * Author: Wang Qiang (rurality.linux@gmail.com) 2009/12/11
- */
-
-
-#ifndef __ASM_ARM_W90X900_REGS_LDM_H
-#define __ASM_ARM_W90X900_REGS_LDM_H
-
-#include <mach/map.h>
-
-/* Display Controller Control/Status Register */
-#define REG_LCM_DCCS (0x00)
-
-#define LCM_DCCS_ENG_RST (1 << 0)
-#define LCM_DCCS_VA_EN (1 << 1)
-#define LCM_DCCS_OSD_EN (1 << 2)
-#define LCM_DCCS_DISP_OUT_EN (1 << 3)
-#define LCM_DCCS_DISP_INT_EN (1 << 4)
-#define LCM_DCCS_CMD_ON (1 << 5)
-#define LCM_DCCS_FIELD_INTR (1 << 6)
-#define LCM_DCCS_SINGLE (1 << 7)
-
-enum LCM_DCCS_VA_SRC {
- LCM_DCCS_VA_SRC_YUV422 = (0 << 8),
- LCM_DCCS_VA_SRC_YCBCR422 = (1 << 8),
- LCM_DCCS_VA_SRC_RGB888 = (2 << 8),
- LCM_DCCS_VA_SRC_RGB666 = (3 << 8),
- LCM_DCCS_VA_SRC_RGB565 = (4 << 8),
- LCM_DCCS_VA_SRC_RGB444LOW = (5 << 8),
- LCM_DCCS_VA_SRC_RGB444HIGH = (7 << 8)
-};
-
-
-/* Display Device Control Register */
-#define REG_LCM_DEV_CTRL (0x04)
-
-enum LCM_DEV_CTRL_SWAP_YCbCr {
- LCM_DEV_CTRL_SWAP_UYVY = (0 << 1),
- LCM_DEV_CTRL_SWAP_YUYV = (1 << 1),
- LCM_DEV_CTRL_SWAP_VYUY = (2 << 1),
- LCM_DEV_CTRL_SWAP_YVYU = (3 << 1)
-};
-
-enum LCM_DEV_CTRL_RGB_SHIFT {
- LCM_DEV_CTRL_RGB_SHIFT_NOT = (0 << 3),
- LCM_DEV_CTRL_RGB_SHIFT_ONECYCLE = (1 << 3),
- LCM_DEV_CTRL_RGB_SHIFT_TWOCYCLE = (2 << 3),
- LCM_DEV_CTRL_RGB_SHIFT_NOT_DEF = (3 << 3)
-};
-
-enum LCM_DEV_CTRL_DEVICE {
- LCM_DEV_CTRL_DEVICE_YUV422 = (0 << 5),
- LCM_DEV_CTRL_DEVICE_YUV444 = (1 << 5),
- LCM_DEV_CTRL_DEVICE_UNIPAC = (4 << 5),
- LCM_DEV_CTRL_DEVICE_SEIKO_EPSON = (5 << 5),
- LCM_DEV_CTRL_DEVICE_HIGH_COLOR = (6 << 5),
- LCM_DEV_CTRL_DEVICE_MPU = (7 << 5)
-};
-
-#define LCM_DEV_CTRL_LCD_DDA (8)
-#define LCM_DEV_CTRL_YUV2CCIR (16)
-
-enum LCM_DEV_CTRL_LCD_SEL {
- LCM_DEV_CTRL_LCD_SEL_RGB_GBR = (0 << 17),
- LCM_DEV_CTRL_LCD_SEL_BGR_RBG = (1 << 17),
- LCM_DEV_CTRL_LCD_SEL_GBR_RGB = (2 << 17),
- LCM_DEV_CTRL_LCD_SEL_RBG_BGR = (3 << 17)
-};
-
-enum LCM_DEV_CTRL_FAL_D {
- LCM_DEV_CTRL_FAL_D_FALLING = (0 << 19),
- LCM_DEV_CTRL_FAL_D_RISING = (1 << 19),
-};
-
-enum LCM_DEV_CTRL_H_POL {
- LCM_DEV_CTRL_H_POL_LOW = (0 << 20),
- LCM_DEV_CTRL_H_POL_HIGH = (1 << 20),
-};
-
-enum LCM_DEV_CTRL_V_POL {
- LCM_DEV_CTRL_V_POL_LOW = (0 << 21),
- LCM_DEV_CTRL_V_POL_HIGH = (1 << 21),
-};
-
-enum LCM_DEV_CTRL_VR_LACE {
- LCM_DEV_CTRL_VR_LACE_NINTERLACE = (0 << 22),
- LCM_DEV_CTRL_VR_LACE_INTERLACE = (1 << 22),
-};
-
-enum LCM_DEV_CTRL_LACE {
- LCM_DEV_CTRL_LACE_NINTERLACE = (0 << 23),
- LCM_DEV_CTRL_LACE_INTERLACE = (1 << 23),
-};
-
-enum LCM_DEV_CTRL_RGB_SCALE {
- LCM_DEV_CTRL_RGB_SCALE_4096 = (0 << 24),
- LCM_DEV_CTRL_RGB_SCALE_65536 = (1 << 24),
- LCM_DEV_CTRL_RGB_SCALE_262144 = (2 << 24),
- LCM_DEV_CTRL_RGB_SCALE_16777216 = (3 << 24),
-};
-
-enum LCM_DEV_CTRL_DBWORD {
- LCM_DEV_CTRL_DBWORD_HALFWORD = (0 << 26),
- LCM_DEV_CTRL_DBWORD_FULLWORD = (1 << 26),
-};
-
-enum LCM_DEV_CTRL_MPU68 {
- LCM_DEV_CTRL_MPU68_80_SERIES = (0 << 27),
- LCM_DEV_CTRL_MPU68_68_SERIES = (1 << 27),
-};
-
-enum LCM_DEV_CTRL_DE_POL {
- LCM_DEV_CTRL_DE_POL_HIGH = (0 << 28),
- LCM_DEV_CTRL_DE_POL_LOW = (1 << 28),
-};
-
-#define LCM_DEV_CTRL_CMD16 (29)
-#define LCM_DEV_CTRL_CM16t18 (30)
-#define LCM_DEV_CTRL_CMD_LOW (31)
-
-/* MPU-Interface LCD Write Command */
-#define REG_LCM_MPU_CMD (0x08)
-
-/* Interrupt Control/Status Register */
-#define REG_LCM_INT_CS (0x0c)
-#define LCM_INT_CS_DISP_F_EN (1 << 0)
-#define LCM_INT_CS_UNDERRUN_EN (1 << 1)
-#define LCM_INT_CS_BUS_ERROR_INT (1 << 28)
-#define LCM_INT_CS_UNDERRUN_INT (1 << 29)
-#define LCM_INT_CS_DISP_F_STATUS (1 << 30)
-#define LCM_INT_CS_DISP_F_INT (1 << 31)
-
-/* CRTC Display Size Control Register */
-#define REG_LCM_CRTC_SIZE (0x10)
-#define LCM_CRTC_SIZE_VTTVAL(x) ((x) << 16)
-#define LCM_CRTC_SIZE_HTTVAL(x) ((x) << 0)
-
-/* CRTC Display Enable End */
-#define REG_LCM_CRTC_DEND (0x14)
-#define LCM_CRTC_DEND_VDENDVAL(x) ((x) << 16)
-#define LCM_CRTC_DEND_HDENDVAL(x) ((x) << 0)
-
-/* CRTC Internal Horizontal Retrace Control Register */
-#define REG_LCM_CRTC_HR (0x18)
-#define LCM_CRTC_HR_EVAL(x) ((x) << 16)
-#define LCM_CRTC_HR_SVAL(x) ((x) << 0)
-
-/* CRTC Horizontal Sync Control Register */
-#define REG_LCM_CRTC_HSYNC (0x1C)
-#define LCM_CRTC_HSYNC_SHIFTVAL(x) ((x) << 30)
-#define LCM_CRTC_HSYNC_EVAL(x) ((x) << 16)
-#define LCM_CRTC_HSYNC_SVAL(x) ((x) << 0)
-
-/* CRTC Internal Vertical Retrace Control Register */
-#define REG_LCM_CRTC_VR (0x20)
-#define LCM_CRTC_VR_EVAL(x) ((x) << 16)
-#define LCM_CRTC_VR_SVAL(x) ((x) << 0)
-
-/* Video Stream Frame Buffer-0 Starting Address */
-#define REG_LCM_VA_BADDR0 (0x24)
-
-/* Video Stream Frame Buffer-1 Starting Address */
-#define REG_LCM_VA_BADDR1 (0x28)
-
-/* Video Stream Frame Buffer Control Register */
-#define REG_LCM_VA_FBCTRL (0x2C)
-#define LCM_VA_FBCTRL_IO_REGION_HALF (1 << 28)
-#define LCM_VA_FBCTRL_FIELD_DUAL (1 << 29)
-#define LCM_VA_FBCTRL_START_BUF (1 << 30)
-#define LCM_VA_FBCTRL_DB_EN (1 << 31)
-
-/* Video Stream Scaling Control Register */
-#define REG_LCM_VA_SCALE (0x30)
-#define LCM_VA_SCALE_XCOPY_INTERPOLATION (0 << 15)
-#define LCM_VA_SCALE_XCOPY_DUPLICATION (1 << 15)
-
-/* Image Stream Active Window Coordinates */
-#define REG_LCM_VA_WIN (0x38)
-
-/* Image Stream Stuff Pixel */
-#define REG_LCM_VA_STUFF (0x3C)
-
-/* OSD Window Starting Coordinates */
-#define REG_LCM_OSD_WINS (0x40)
-
-/* OSD Window Ending Coordinates */
-#define REG_LCM_OSD_WINE (0x44)
-
-/* OSD Stream Frame Buffer Starting Address */
-#define REG_LCM_OSD_BADDR (0x48)
-
-/* OSD Stream Frame Buffer Control Register */
-#define REG_LCM_OSD_FBCTRL (0x4c)
-
-/* OSD Overlay Control Register */
-#define REG_LCM_OSD_OVERLAY (0x50)
-
-/* OSD Overlay Color-Key Pattern Register */
-#define REG_LCM_OSD_CKEY (0x54)
-
-/* OSD Overlay Color-Key Mask Register */
-#define REG_LCM_OSD_CMASK (0x58)
-
-/* OSD Window Skip1 Register */
-#define REG_LCM_OSD_SKIP1 (0x5C)
-
-/* OSD Window Skip2 Register */
-#define REG_LCM_OSD_SKIP2 (0x60)
-
-/* OSD horizontal up scaling control register */
-#define REG_LCM_OSD_SCALE (0x64)
-
-/* MPU Vsync control register */
-#define REG_LCM_MPU_VSYNC (0x68)
-
-/* Hardware cursor control Register */
-#define REG_LCM_HC_CTRL (0x6C)
-
-/* Hardware cursot tip point potison on va picture */
-#define REG_LCM_HC_POS (0x70)
-
-/* Hardware Cursor Window Buffer Control Register */
-#define REG_LCM_HC_WBCTRL (0x74)
-
-/* Hardware cursor memory base address register */
-#define REG_LCM_HC_BADDR (0x78)
-
-/* Hardware cursor color ram register mapped to bpp = 0 */
-#define REG_LCM_HC_COLOR0 (0x7C)
-
-/* Hardware cursor color ram register mapped to bpp = 1 */
-#define REG_LCM_HC_COLOR1 (0x80)
-
-/* Hardware cursor color ram register mapped to bpp = 2 */
-#define REG_LCM_HC_COLOR2 (0x84)
-
-/* Hardware cursor color ram register mapped to bpp = 3 */
-#define REG_LCM_HC_COLOR3 (0x88)
-
-#endif /* __ASM_ARM_W90X900_REGS_LDM_H */
deleted file mode 100644
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-w90x900/include/mach/regs-serial.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/regs-serial.h
- */
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define UART0_BA W90X900_VA_UART
-#define UART1_BA (W90X900_VA_UART+0x100)
-#define UART2_BA (W90X900_VA_UART+0x200)
-#define UART3_BA (W90X900_VA_UART+0x300)
-#define UART4_BA (W90X900_VA_UART+0x400)
-
-#define UART0_PA W90X900_PA_UART
-#define UART1_PA (W90X900_PA_UART+0x100)
-#define UART2_PA (W90X900_PA_UART+0x200)
-#define UART3_PA (W90X900_PA_UART+0x300)
-#define UART4_PA (W90X900_PA_UART+0x400)
-
-#ifndef __ASSEMBLY__
-
-struct w90x900_uart_clksrc {
- const char *name;
- unsigned int divisor;
- unsigned int min_baud;
- unsigned int max_baud;
-};
-
-struct w90x900_uartcfg {
- unsigned char hwport;
- unsigned char unused;
- unsigned short flags;
- unsigned long uart_flags;
-
- unsigned long ucon;
- unsigned long ulcon;
- unsigned long ufcon;
-
- struct w90x900_uart_clksrc *clocks;
- unsigned int clocks_size;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
deleted file mode 100644
@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-w90x900/include/mach/uncompress.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-/* Defines for UART registers */
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-#include <linux/serial_reg.h>
-
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-static volatile u32 * const uart_base = (u32 *)UART0_PA;
-
-static inline void putc(int ch)
-{
- /* Check THRE and TEMT bits before we transmit the character.
- */
- while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
-
- *uart_base = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-static void arch_decomp_setup(void)
-{
-}
-
-#endif/* __ASM_W90X900_UNCOMPRESS_H */
deleted file mode 100644
@@ -1,212 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/irq.c
- *
- * based on linux/arch/arm/plat-s3c24xx/irq.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
-#include "nuc9xx.h"
-
-struct group_irq {
- unsigned long gpen;
- unsigned int enabled;
- void (*enable)(struct group_irq *, int enable);
-};
-
-static DEFINE_SPINLOCK(groupirq_lock);
-
-#define DEFINE_GROUP(_name, _ctrlbit, _num) \
-struct group_irq group_##_name = { \
- .enable = nuc900_group_enable, \
- .gpen = ((1 << _num) - 1) << _ctrlbit, \
- }
-
-static void nuc900_group_enable(struct group_irq *gpirq, int enable);
-
-static DEFINE_GROUP(nirq0, 0, 4);
-static DEFINE_GROUP(nirq1, 4, 4);
-static DEFINE_GROUP(usbh, 8, 2);
-static DEFINE_GROUP(ottimer, 16, 3);
-static DEFINE_GROUP(gdma, 20, 2);
-static DEFINE_GROUP(sc, 24, 2);
-static DEFINE_GROUP(i2c, 26, 2);
-static DEFINE_GROUP(ps2, 28, 2);
-
-static int group_irq_enable(struct group_irq *group_irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&groupirq_lock, flags);
- if (group_irq->enabled++ == 0)
- (group_irq->enable)(group_irq, 1);
- spin_unlock_irqrestore(&groupirq_lock, flags);
-
- return 0;
-}
-
-static void group_irq_disable(struct group_irq *group_irq)
-{
- unsigned long flags;
-
- WARN_ON(group_irq->enabled == 0);
-
- spin_lock_irqsave(&groupirq_lock, flags);
- if (--group_irq->enabled == 0)
- (group_irq->enable)(group_irq, 0);
- spin_unlock_irqrestore(&groupirq_lock, flags);
-}
-
-static void nuc900_group_enable(struct group_irq *gpirq, int enable)
-{
- unsigned int groupen = gpirq->gpen;
- unsigned long regval;
-
- regval = __raw_readl(REG_AIC_GEN);
-
- if (enable)
- regval |= groupen;
- else
- regval &= ~groupen;
-
- __raw_writel(regval, REG_AIC_GEN);
-}
-
-static void nuc900_irq_mask(struct irq_data *d)
-{
- struct group_irq *group_irq;
-
- group_irq = NULL;
-
- __raw_writel(1 << d->irq, REG_AIC_MDCR);
-
- switch (d->irq) {
- case IRQ_GROUP0:
- group_irq = &group_nirq0;
- break;
-
- case IRQ_GROUP1:
- group_irq = &group_nirq1;
- break;
-
- case IRQ_USBH:
- group_irq = &group_usbh;
- break;
-
- case IRQ_T_INT_GROUP:
- group_irq = &group_ottimer;
- break;
-
- case IRQ_GDMAGROUP:
- group_irq = &group_gdma;
- break;
-
- case IRQ_SCGROUP:
- group_irq = &group_sc;
- break;
-
- case IRQ_I2CGROUP:
- group_irq = &group_i2c;
- break;
-
- case IRQ_P2SGROUP:
- group_irq = &group_ps2;
- break;
- }
-
- if (group_irq)
- group_irq_disable(group_irq);
-}
-
-/*
- * By the w90p910 spec,any irq,only write 1
- * to REG_AIC_EOSCR for ACK
- */
-
-static void nuc900_irq_ack(struct irq_data *d)
-{
- __raw_writel(0x01, REG_AIC_EOSCR);
-}
-
-static void nuc900_irq_unmask(struct irq_data *d)
-{
- struct group_irq *group_irq;
-
- group_irq = NULL;
-
- __raw_writel(1 << d->irq, REG_AIC_MECR);
-
- switch (d->irq) {
- case IRQ_GROUP0:
- group_irq = &group_nirq0;
- break;
-
- case IRQ_GROUP1:
- group_irq = &group_nirq1;
- break;
-
- case IRQ_USBH:
- group_irq = &group_usbh;
- break;
-
- case IRQ_T_INT_GROUP:
- group_irq = &group_ottimer;
- break;
-
- case IRQ_GDMAGROUP:
- group_irq = &group_gdma;
- break;
-
- case IRQ_SCGROUP:
- group_irq = &group_sc;
- break;
-
- case IRQ_I2CGROUP:
- group_irq = &group_i2c;
- break;
-
- case IRQ_P2SGROUP:
- group_irq = &group_ps2;
- break;
- }
-
- if (group_irq)
- group_irq_enable(group_irq);
-}
-
-static struct irq_chip nuc900_irq_chip = {
- .irq_ack = nuc900_irq_ack,
- .irq_mask = nuc900_irq_mask,
- .irq_unmask = nuc900_irq_unmask,
-};
-
-void __init nuc900_init_irq(void)
-{
- int irqno;
-
- __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
-
- for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
- irq_set_chip_and_handler(irqno, &nuc900_irq_chip,
- handle_level_irq);
- irq_clear_status_flags(irqno, IRQ_NOREQUEST);
- }
-}
deleted file mode 100644
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/map.h>
-
-#include "nuc910.h"
-
-static void __init nuc910evb_map_io(void)
-{
- nuc910_map_io();
- nuc910_init_clocks();
-}
-
-static void __init nuc910evb_init(void)
-{
- nuc910_board_init();
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
- /* Maintainer: Wan ZongShun */
- .map_io = nuc910evb_map_io,
- .init_irq = nuc900_init_irq,
- .init_machine = nuc910evb_init,
- .init_time = nuc900_timer_init,
- .restart = nuc9xx_restart,
-MACHINE_END
deleted file mode 100644
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * history:
- * Wang Qiang (rurality.linux@gmail.com) add LCD support
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/map.h>
-#include <linux/platform_data/video-nuc900fb.h>
-
-#include "nuc950.h"
-
-static void __init nuc950evb_map_io(void)
-{
- nuc950_map_io();
- nuc950_init_clocks();
-}
-
-static void __init nuc950evb_init(void)
-{
- nuc950_board_init();
-}
-
-MACHINE_START(W90P950EVB, "W90P950EVB")
- /* Maintainer: Wan ZongShun */
- .map_io = nuc950evb_map_io,
- .init_irq = nuc900_init_irq,
- .init_machine = nuc950evb_init,
- .init_time = nuc900_timer_init,
- .restart = nuc9xx_restart,
-MACHINE_END
deleted file mode 100644
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/map.h>
-
-#include "nuc960.h"
-
-static void __init nuc960evb_map_io(void)
-{
- nuc960_map_io();
- nuc960_init_clocks();
-}
-
-static void __init nuc960evb_init(void)
-{
- nuc960_board_init();
-}
-
-MACHINE_START(W90N960EVB, "W90N960EVB")
- /* Maintainer: Wan ZongShun */
- .map_io = nuc960evb_map_io,
- .init_irq = nuc900_init_irq,
- .init_machine = nuc960evb_init,
- .init_time = nuc900_timer_init,
- .restart = nuc9xx_restart,
-MACHINE_END
deleted file mode 100644
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/mfp.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define REG_MFSEL (W90X900_VA_GCR + 0xC)
-
-#define GPSELF (0x01 << 1)
-#define GPSELC (0x03 << 2)
-#define GPSELD (0x0f << 4)
-
-#define GPSELEI0 (0x01 << 26)
-#define GPSELEI1 (0x01 << 27)
-
-#define GPIOG0TO1 (0x03 << 14)
-#define GPIOG2TO3 (0x03 << 16)
-#define GPIOG22TO23 (0x03 << 22)
-#define GPIOG18TO20 (0x07 << 18)
-
-#define ENSPI (0x0a << 14)
-#define ENI2C0 (0x01 << 14)
-#define ENI2C1 (0x01 << 16)
-#define ENAC97 (0x02 << 22)
-#define ENSD1 (0x02 << 18)
-#define ENSD0 (0x0a << 4)
-#define ENKPI (0x02 << 2)
-#define ENNAND (0x01 << 2)
-
-static DEFINE_MUTEX(mfp_mutex);
-
-void mfp_set_groupf(struct device *dev)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- mutex_lock(&mfp_mutex);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "nuc900-emc") == 0)
- mfpen |= GPSELF;/*enable mac*/
- else
- mfpen &= ~GPSELF;/*GPIOF[9:0]*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupf);
-
-void mfp_set_groupc(struct device *dev)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- mutex_lock(&mfp_mutex);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "nuc900-lcd") == 0)
- mfpen |= GPSELC;/*enable lcd*/
- else if (strcmp(dev_id, "nuc900-kpi") == 0) {
- mfpen &= (~GPSELC);/*enable kpi*/
- mfpen |= ENKPI;
- } else if (strcmp(dev_id, "nuc900-nand") == 0) {
- mfpen &= (~GPSELC);/*enable nand*/
- mfpen |= ENNAND;
- } else
- mfpen &= (~GPSELC);/*GPIOC[14:0]*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupc);
-
-void mfp_set_groupi(struct device *dev)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- mutex_lock(&mfp_mutex);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- mfpen &= ~GPSELEI1;/*default gpio16*/
-
- if (strcmp(dev_id, "nuc900-wdog") == 0)
- mfpen |= GPSELEI1;/*enable wdog*/
- else if (strcmp(dev_id, "nuc900-atapi") == 0)
- mfpen |= GPSELEI0;/*enable atapi*/
- else if (strcmp(dev_id, "nuc900-keypad") == 0)
- mfpen &= ~GPSELEI0;/*enable keypad*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupi);
-
-void mfp_set_groupg(struct device *dev, const char *subname)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON((!dev) && (!subname));
-
- mutex_lock(&mfp_mutex);
-
- if (subname != NULL)
- dev_id = subname;
- else
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "nuc900-spi") == 0) {
- mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
- mfpen |= ENSPI;/*enable spi*/
- } else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
- mfpen &= ~(GPIOG0TO1);
- mfpen |= ENI2C0;/*enable i2c0*/
- } else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
- mfpen &= ~(GPIOG2TO3);
- mfpen |= ENI2C1;/*enable i2c1*/
- } else if (strcmp(dev_id, "nuc900-ac97") == 0) {
- mfpen &= ~(GPIOG22TO23);
- mfpen |= ENAC97;/*enable AC97*/
- } else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
- mfpen &= ~(GPIOG18TO20);
- mfpen |= (ENSD1 | 0x01);/*enable sd1*/
- } else {
- mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
- }
-
- __raw_writel(mfpen, REG_MFSEL);
-
- mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupg);
-
-void mfp_set_groupd(struct device *dev, const char *subname)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON((!dev) && (!subname));
-
- mutex_lock(&mfp_mutex);
-
- if (subname != NULL)
- dev_id = subname;
- else
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
- mfpen &= ~GPSELD;/*enable sd0*/
- mfpen |= ENSD0;
- } else
- mfpen &= (~GPSELD);
-
- __raw_writel(mfpen, REG_MFSEL);
-
- mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupd);
deleted file mode 100644
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/nuc910.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC910 cpu support
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include "cpu.h"
-#include "clock.h"
-
-/* define specific CPU platform device */
-
-static struct platform_device *nuc910_dev[] __initdata = {
- &nuc900_device_ts,
- &nuc900_device_rtc,
- &nuc900_device_lcd,
- &nuc900_device_kpi,
-};
-
-/* define specific CPU platform io map */
-
-static struct map_desc nuc910evb_iodesc[] __initdata = {
- IODESC_ENT(USBEHCIHOST),
- IODESC_ENT(USBOHCIHOST),
- IODESC_ENT(KPI),
- IODESC_ENT(USBDEV),
- IODESC_ENT(ADC),
-};
-
-/*Init NUC910 evb io*/
-
-void __init nuc910_map_io(void)
-{
- nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
-}
-
-/*Init NUC910 clock*/
-
-void __init nuc910_init_clocks(void)
-{
- nuc900_init_clocks();
-}
-
-/*Init NUC910 board info*/
-
-void __init nuc910_board_init(void)
-{
- nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
-}
deleted file mode 100644
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/nuc910.h
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-#include "nuc9xx.h"
-
-/* extern file from nuc910.c */
-
-extern void nuc910_board_init(void);
-extern void nuc910_init_clocks(void);
-extern void nuc910_map_io(void);
deleted file mode 100644
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/nuc950.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC950 cpu support
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-#include "cpu.h"
-
-/* define specific CPU platform device */
-
-static struct platform_device *nuc950_dev[] __initdata = {
- &nuc900_device_kpi,
- &nuc900_device_fmi,
- &nuc900_device_lcd,
-};
-
-/* define specific CPU platform io map */
-
-static struct map_desc nuc950evb_iodesc[] __initdata = {
-};
-
-/*Init NUC950 evb io*/
-
-void __init nuc950_map_io(void)
-{
- nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
-}
-
-/*Init NUC950 clock*/
-
-void __init nuc950_init_clocks(void)
-{
- nuc900_init_clocks();
-}
-
-/*Init NUC950 board info*/
-
-void __init nuc950_board_init(void)
-{
- nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
-}
deleted file mode 100644
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/nuc950.h
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-#include "nuc9xx.h"
-
-/* extern file from nuc950.c */
-
-extern void nuc950_board_init(void);
-extern void nuc950_init_clocks(void);
-extern void nuc950_map_io(void);
deleted file mode 100644
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-w90x900/nuc960.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC960 cpu support
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include "cpu.h"
-
-/* define specific CPU platform device */
-
-static struct platform_device *nuc960_dev[] __initdata = {
- &nuc900_device_kpi,
- &nuc900_device_fmi,
-};
-
-/* define specific CPU platform io map */
-
-static struct map_desc nuc960evb_iodesc[] __initdata = {
-};
-
-/*Init NUC960 evb io*/
-
-void __init nuc960_map_io(void)
-{
- nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
-}
-
-/*Init NUC960 clock*/
-
-void __init nuc960_init_clocks(void)
-{
- nuc900_init_clocks();
-}
-
-/*Init NUC960 board info*/
-
-void __init nuc960_board_init(void)
-{
- nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
-}
deleted file mode 100644
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/nuc960.h
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-#include "nuc9xx.h"
-
-/* extern file from nuc960.c */
-
-extern void nuc960_board_init(void);
-extern void nuc960_init_clocks(void);
-extern void nuc960_map_io(void);
deleted file mode 100644
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/nuc9xx.h
- *
- * Copied from nuc910.h, which had:
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/reboot.h>
-
-struct map_desc;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern void nuc900_timer_init(void);
-extern void nuc9xx_restart(enum reboot_mode, const char *);
deleted file mode 100644
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/include/mach/regs-ebi.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#ifndef __ASM_ARCH_REGS_EBI_H
-#define __ASM_ARCH_REGS_EBI_H
-
-/* EBI Control Registers */
-
-#define EBI_BA W90X900_VA_EBI
-#define REG_EBICON (EBI_BA + 0x00)
-#define REG_ROMCON (EBI_BA + 0x04)
-#define REG_SDCONF0 (EBI_BA + 0x08)
-#define REG_SDCONF1 (EBI_BA + 0x0C)
-#define REG_SDTIME0 (EBI_BA + 0x10)
-#define REG_SDTIME1 (EBI_BA + 0x14)
-#define REG_EXT0CON (EBI_BA + 0x18)
-#define REG_EXT1CON (EBI_BA + 0x1C)
-#define REG_EXT2CON (EBI_BA + 0x20)
-#define REG_EXT3CON (EBI_BA + 0x24)
-#define REG_EXT4CON (EBI_BA + 0x28)
-#define REG_CKSKEW (EBI_BA + 0x2C)
-
-#endif /* __ASM_ARCH_REGS_EBI_H */
deleted file mode 100644
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-w90x900/include/mach/regs-gcr.h
- *
- * Copyright (c) 2010 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#ifndef __ASM_ARCH_REGS_GCR_H
-#define __ASM_ARCH_REGS_GCR_H
-
-/* Global control registers */
-
-#define GCR_BA W90X900_VA_GCR
-#define REG_PDID (GCR_BA+0x000)
-#define REG_PWRON (GCR_BA+0x004)
-#define REG_ARBCON (GCR_BA+0x008)
-#define REG_MFSEL (GCR_BA+0x00C)
-#define REG_EBIDPE (GCR_BA+0x010)
-#define REG_LCDDPE (GCR_BA+0x014)
-#define REG_GPIOCPE (GCR_BA+0x018)
-#define REG_GPIODPE (GCR_BA+0x01C)
-#define REG_GPIOEPE (GCR_BA+0x020)
-#define REG_GPIOFPE (GCR_BA+0x024)
-#define REG_GPIOGPE (GCR_BA+0x028)
-#define REG_GPIOHPE (GCR_BA+0x02C)
-#define REG_GPIOIPE (GCR_BA+0x030)
-#define REG_GTMP1 (GCR_BA+0x034)
-#define REG_GTMP2 (GCR_BA+0x038)
-#define REG_GTMP3 (GCR_BA+0x03C)
-
-#endif /* __ASM_ARCH_REGS_GCR_H */
deleted file mode 100644
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-w90x900/include/mach/regs-timer.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/regs-timer.h
- */
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-/* Timer Registers */
-
-#define TMR_BA W90X900_VA_TIMER
-#define REG_TCSR0 (TMR_BA+0x00)
-#define REG_TCSR1 (TMR_BA+0x04)
-#define REG_TICR0 (TMR_BA+0x08)
-#define REG_TICR1 (TMR_BA+0x0C)
-#define REG_TDR0 (TMR_BA+0x10)
-#define REG_TDR1 (TMR_BA+0x14)
-#define REG_TISR (TMR_BA+0x18)
-#define REG_WTCR (TMR_BA+0x1C)
-#define REG_TCSR2 (TMR_BA+0x20)
-#define REG_TCSR3 (TMR_BA+0x24)
-#define REG_TICR2 (TMR_BA+0x28)
-#define REG_TICR3 (TMR_BA+0x2C)
-#define REG_TDR2 (TMR_BA+0x30)
-#define REG_TDR3 (TMR_BA+0x34)
-#define REG_TCSR4 (TMR_BA+0x40)
-#define REG_TICR4 (TMR_BA+0x48)
-#define REG_TDR4 (TMR_BA+0x50)
-
-#endif /* __ASM_ARCH_REGS_TIMER_H */
deleted file mode 100644
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-w90x900/include/mach/regs-usb.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#ifndef __ASM_ARCH_REGS_USB_H
-#define __ASM_ARCH_REGS_USB_H
-
-/* usb Control Registers */
-#define USBH_BA W90X900_VA_USBEHCIHOST
-#define USBD_BA W90X900_VA_USBDEV
-#define USBO_BA W90X900_VA_USBOHCIHOST
-
-/* USB Host Control Registers */
-#define REG_UPSCR0 (USBH_BA+0x064)
-#define REG_UPSCR1 (USBH_BA+0x068)
-#define REG_USBPCR0 (USBH_BA+0x0C4)
-#define REG_USBPCR1 (USBH_BA+0x0C8)
-
-/* USBH OHCI Control Registers */
-#define REG_OpModEn (USBO_BA+0x204)
-/*This bit controls the polarity of over
-*current flag from external power IC.
-*/
-#define OCALow 0x08
-
-#endif /* __ASM_ARCH_REGS_USB_H */
deleted file mode 100644
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * linux/arch/arm/mach-w90x900/time.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
- *
- * Copyright (c) 2009 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/map.h>
-#include "regs-timer.h"
-
-#include "nuc9xx.h"
-
-#define RESETINT 0x1f
-#define PERIOD (0x01 << 27)
-#define ONESHOT (0x00 << 27)
-#define COUNTEN (0x01 << 30)
-#define INTEN (0x01 << 29)
-
-#define TICKS_PER_SEC 100
-#define PRESCALE 0x63 /* Divider = prescale + 1 */
-
-#define TDR_SHIFT 24
-
-static unsigned int timer0_load;
-
-static int nuc900_clockevent_shutdown(struct clock_event_device *evt)
-{
- unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
-
- __raw_writel(val, REG_TCSR0);
- return 0;
-}
-
-static int nuc900_clockevent_set_oneshot(struct clock_event_device *evt)
-{
- unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
-
- val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
-
- __raw_writel(val, REG_TCSR0);
- return 0;
-}
-
-static int nuc900_clockevent_set_periodic(struct clock_event_device *evt)
-{
- unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
-
- __raw_writel(timer0_load, REG_TICR0);
- val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
- __raw_writel(val, REG_TCSR0);
- return 0;
-}
-
-static int nuc900_clockevent_setnextevent(unsigned long evt,
- struct clock_event_device *clk)
-{
- unsigned int val;
-
- __raw_writel(evt, REG_TICR0);
-
- val = __raw_readl(REG_TCSR0);
- val |= (COUNTEN | INTEN | PRESCALE);
- __raw_writel(val, REG_TCSR0);
-
- return 0;
-}
-
-static struct clock_event_device nuc900_clockevent_device = {
- .name = "nuc900-timer0",
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_state_shutdown = nuc900_clockevent_shutdown,
- .set_state_periodic = nuc900_clockevent_set_periodic,
- .set_state_oneshot = nuc900_clockevent_set_oneshot,
- .tick_resume = nuc900_clockevent_shutdown,
- .set_next_event = nuc900_clockevent_setnextevent,
- .rating = 300,
-};
-
-/*IRQ handler for the timer*/
-
-static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &nuc900_clockevent_device;
-
- __raw_writel(0x01, REG_TISR); /* clear TIF0 */
-
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static struct irqaction nuc900_timer0_irq = {
- .name = "nuc900-timer0",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = nuc900_timer0_interrupt,
-};
-
-static void __init nuc900_clockevents_init(void)
-{
- unsigned int rate;
- struct clk *clk = clk_get(NULL, "timer0");
-
- BUG_ON(IS_ERR(clk));
-
- __raw_writel(0x00, REG_TCSR0);
-
- clk_enable(clk);
- rate = clk_get_rate(clk) / (PRESCALE + 1);
-
- timer0_load = (rate / TICKS_PER_SEC);
-
- __raw_writel(RESETINT, REG_TISR);
- setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
-
- nuc900_clockevent_device.cpumask = cpumask_of(0);
-
- clockevents_config_and_register(&nuc900_clockevent_device, rate,
- 0xf, 0xffffffff);
-}
-
-static void __init nuc900_clocksource_init(void)
-{
- unsigned int val;
- unsigned int rate;
- struct clk *clk = clk_get(NULL, "timer1");
-
- BUG_ON(IS_ERR(clk));
-
- __raw_writel(0x00, REG_TCSR1);
-
- clk_enable(clk);
- rate = clk_get_rate(clk) / (PRESCALE + 1);
-
- __raw_writel(0xffffffff, REG_TICR1);
-
- val = __raw_readl(REG_TCSR1);
- val |= (COUNTEN | PERIOD | PRESCALE);
- __raw_writel(val, REG_TCSR1);
-
- clocksource_mmio_init(REG_TDR1, "nuc900-timer1", rate, 200,
- TDR_SHIFT, clocksource_mmio_readl_down);
-}
-
-void __init nuc900_timer_init(void)
-{
- nuc900_clocksource_init();
- nuc900_clockevents_init();
-}
This removes the old Winbond w90x900 platform, also known as Nuvoton NUC900. Wan Zongshun originally contributed the port and maintained it since then. From all I can tell, this platform is no longer being used with modern kernels, based on various indications: - The supported chips (nuc910/950/960) are no longer marketed by the manufacturer - Newer chips from the same family (nuc97x, nuc980, n329x) that are still marketed have Linux BSPs but those were never submitted for upstream inclusion. - The last patch from the platform maintainer was in 2011. - All patches to w90x900 platform specific files afterwards are cleanups that were apparently done without access to test hardware. - Both the website and the email address listed in the MAINTAINERS have become unreachable. Cc: "Wanzongshun (Vincent)" <wanzongshun@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- MAINTAINERS | 16 - arch/arm/Kconfig | 18 - arch/arm/Makefile | 1 - arch/arm/configs/nuc910_defconfig | 51 -- arch/arm/configs/nuc950_defconfig | 67 --- arch/arm/configs/nuc960_defconfig | 57 -- arch/arm/mach-w90x900/Kconfig | 50 -- arch/arm/mach-w90x900/Makefile | 20 - arch/arm/mach-w90x900/Makefile.boot | 4 - arch/arm/mach-w90x900/clksel.c | 88 --- arch/arm/mach-w90x900/clock.c | 121 ---- arch/arm/mach-w90x900/clock.h | 40 -- arch/arm/mach-w90x900/cpu.c | 238 -------- arch/arm/mach-w90x900/cpu.h | 56 -- arch/arm/mach-w90x900/dev.c | 537 ------------------ arch/arm/mach-w90x900/gpio.c | 150 ----- .../mach-w90x900/include/mach/entry-macro.S | 26 - arch/arm/mach-w90x900/include/mach/hardware.h | 19 - arch/arm/mach-w90x900/include/mach/irqs.h | 82 --- arch/arm/mach-w90x900/include/mach/map.h | 153 ----- arch/arm/mach-w90x900/include/mach/mfp.h | 21 - .../mach-w90x900/include/mach/regs-clock.h | 49 -- arch/arm/mach-w90x900/include/mach/regs-irq.h | 46 -- arch/arm/mach-w90x900/include/mach/regs-ldm.h | 248 -------- .../mach-w90x900/include/mach/regs-serial.h | 54 -- .../mach-w90x900/include/mach/uncompress.h | 43 -- arch/arm/mach-w90x900/irq.c | 212 ------- arch/arm/mach-w90x900/mach-nuc910evb.c | 38 -- arch/arm/mach-w90x900/mach-nuc950evb.c | 42 -- arch/arm/mach-w90x900/mach-nuc960evb.c | 38 -- arch/arm/mach-w90x900/mfp.c | 197 ------- arch/arm/mach-w90x900/nuc910.c | 58 -- arch/arm/mach-w90x900/nuc910.h | 17 - arch/arm/mach-w90x900/nuc950.c | 52 -- arch/arm/mach-w90x900/nuc950.h | 17 - arch/arm/mach-w90x900/nuc960.c | 50 -- arch/arm/mach-w90x900/nuc960.h | 17 - arch/arm/mach-w90x900/nuc9xx.h | 22 - arch/arm/mach-w90x900/regs-ebi.h | 29 - arch/arm/mach-w90x900/regs-gcr.h | 34 -- arch/arm/mach-w90x900/regs-timer.h | 37 -- arch/arm/mach-w90x900/regs-usb.h | 31 - arch/arm/mach-w90x900/time.c | 168 ------ 43 files changed, 3314 deletions(-) delete mode 100644 arch/arm/configs/nuc910_defconfig delete mode 100644 arch/arm/configs/nuc950_defconfig delete mode 100644 arch/arm/configs/nuc960_defconfig delete mode 100644 arch/arm/mach-w90x900/Kconfig delete mode 100644 arch/arm/mach-w90x900/Makefile delete mode 100644 arch/arm/mach-w90x900/Makefile.boot delete mode 100644 arch/arm/mach-w90x900/clksel.c delete mode 100644 arch/arm/mach-w90x900/clock.c delete mode 100644 arch/arm/mach-w90x900/clock.h delete mode 100644 arch/arm/mach-w90x900/cpu.c delete mode 100644 arch/arm/mach-w90x900/cpu.h delete mode 100644 arch/arm/mach-w90x900/dev.c delete mode 100644 arch/arm/mach-w90x900/gpio.c delete mode 100644 arch/arm/mach-w90x900/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-w90x900/include/mach/hardware.h delete mode 100644 arch/arm/mach-w90x900/include/mach/irqs.h delete mode 100644 arch/arm/mach-w90x900/include/mach/map.h delete mode 100644 arch/arm/mach-w90x900/include/mach/mfp.h delete mode 100644 arch/arm/mach-w90x900/include/mach/regs-clock.h delete mode 100644 arch/arm/mach-w90x900/include/mach/regs-irq.h delete mode 100644 arch/arm/mach-w90x900/include/mach/regs-ldm.h delete mode 100644 arch/arm/mach-w90x900/include/mach/regs-serial.h delete mode 100644 arch/arm/mach-w90x900/include/mach/uncompress.h delete mode 100644 arch/arm/mach-w90x900/irq.c delete mode 100644 arch/arm/mach-w90x900/mach-nuc910evb.c delete mode 100644 arch/arm/mach-w90x900/mach-nuc950evb.c delete mode 100644 arch/arm/mach-w90x900/mach-nuc960evb.c delete mode 100644 arch/arm/mach-w90x900/mfp.c delete mode 100644 arch/arm/mach-w90x900/nuc910.c delete mode 100644 arch/arm/mach-w90x900/nuc910.h delete mode 100644 arch/arm/mach-w90x900/nuc950.c delete mode 100644 arch/arm/mach-w90x900/nuc950.h delete mode 100644 arch/arm/mach-w90x900/nuc960.c delete mode 100644 arch/arm/mach-w90x900/nuc960.h delete mode 100644 arch/arm/mach-w90x900/nuc9xx.h delete mode 100644 arch/arm/mach-w90x900/regs-ebi.h delete mode 100644 arch/arm/mach-w90x900/regs-gcr.h delete mode 100644 arch/arm/mach-w90x900/regs-timer.h delete mode 100644 arch/arm/mach-w90x900/regs-usb.h delete mode 100644 arch/arm/mach-w90x900/time.c -- 2.20.0