diff mbox series

[v2,1/2,RESEND] usb: core: phy: add support for PHY calibration

Message ID 20190808094128.27213-2-m.szyprowski@samsung.com
State New
Headers show
Series Fix USB3.0 DRD PHY calibration issues (DWC3/XHCI) on Exynos542x SoCs | expand

Commit Message

Marek Szyprowski Aug. 8, 2019, 9:41 a.m. UTC
Some PHYs (for example Exynos5 USB3.0 DRD PHY) require calibration to be
done after every USB HCD reset. Generic PHY framework has been already
extended with phy_calibrate() function in commit 36914111e682 ("drivers:
phy: add calibrate method"). This patch adds support for it to generic
PHY handling code in USB HCD core.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Tested-by: Anand Moon <linux.amoon@gmail.com>

Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de>

---
 drivers/usb/core/hcd.c |  7 +++++++
 drivers/usb/core/phy.c | 21 +++++++++++++++++++++
 drivers/usb/core/phy.h |  1 +
 3 files changed, 29 insertions(+)

-- 
2.17.1

Comments

Greg KH Aug. 29, 2019, 10:21 a.m. UTC | #1
On Thu, Aug 29, 2019 at 07:26:50AM +0200, Marek Szyprowski wrote:
> Hi Greg,

> 

> On 2019-08-28 22:41, Greg Kroah-Hartman wrote:

> > On Mon, Aug 26, 2019 at 10:55:33AM +0200, Marek Szyprowski wrote:

> >> Hi Greg

> >>

> >> On 2019-08-08 11:41, Marek Szyprowski wrote:

> >>> Some PHYs (for example Exynos5 USB3.0 DRD PHY) require calibration to be

> >>> done after every USB HCD reset. Generic PHY framework has been already

> >>> extended with phy_calibrate() function in commit 36914111e682 ("drivers:

> >>> phy: add calibrate method"). This patch adds support for it to generic

> >>> PHY handling code in USB HCD core.

> >>>

> >>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

> >>> Tested-by: Anand Moon <linux.amoon@gmail.com>

> >>> Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de>

> >> Greg: any chance to give it this a try in -next? If not, maybe You can

> >> point someone whose review will help?

> > Ah crap, this is me, not the PHY maintainer :(

> >

> > Can you resend this and I will be glad to review it.  But it would also

> > be good to get Felipe's review as well.

> 

> No problem, I will resend it again in a few minutes. Felipe already 

> acked it: https://lkml.org/lkml/2019/8/8/460


I don't see the resend, did I miss it?

And can you add Felipe's ack to it?

thanks,

greg k-h
Marek Szyprowski Aug. 29, 2019, 10:27 a.m. UTC | #2
Hi Greg,

On 2019-08-29 12:21, Greg Kroah-Hartman wrote:
> On Thu, Aug 29, 2019 at 07:26:50AM +0200, Marek Szyprowski wrote:

>> Hi Greg,

>>

>> On 2019-08-28 22:41, Greg Kroah-Hartman wrote:

>>> On Mon, Aug 26, 2019 at 10:55:33AM +0200, Marek Szyprowski wrote:

>>>> Hi Greg

>>>>

>>>> On 2019-08-08 11:41, Marek Szyprowski wrote:

>>>>> Some PHYs (for example Exynos5 USB3.0 DRD PHY) require calibration to be

>>>>> done after every USB HCD reset. Generic PHY framework has been already

>>>>> extended with phy_calibrate() function in commit 36914111e682 ("drivers:

>>>>> phy: add calibrate method"). This patch adds support for it to generic

>>>>> PHY handling code in USB HCD core.

>>>>>

>>>>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

>>>>> Tested-by: Anand Moon <linux.amoon@gmail.com>

>>>>> Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de>

>>>> Greg: any chance to give it this a try in -next? If not, maybe You can

>>>> point someone whose review will help?

>>> Ah crap, this is me, not the PHY maintainer :(

>>>

>>> Can you resend this and I will be glad to review it.  But it would also

>>> be good to get Felipe's review as well.

>> No problem, I will resend it again in a few minutes. Felipe already

>> acked it: https://lkml.org/lkml/2019/8/8/460

> I don't see the resend, did I miss it?


I looks so: https://lkml.org/lkml/2019/8/29/31

> And can you add Felipe's ack to it?


Yes, I've already did that.


Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland
Greg KH Aug. 29, 2019, 11:22 a.m. UTC | #3
On Thu, Aug 29, 2019 at 12:27:34PM +0200, Marek Szyprowski wrote:
> Hi Greg,

> 

> On 2019-08-29 12:21, Greg Kroah-Hartman wrote:

> > On Thu, Aug 29, 2019 at 07:26:50AM +0200, Marek Szyprowski wrote:

> >> Hi Greg,

> >>

> >> On 2019-08-28 22:41, Greg Kroah-Hartman wrote:

> >>> On Mon, Aug 26, 2019 at 10:55:33AM +0200, Marek Szyprowski wrote:

> >>>> Hi Greg

> >>>>

> >>>> On 2019-08-08 11:41, Marek Szyprowski wrote:

> >>>>> Some PHYs (for example Exynos5 USB3.0 DRD PHY) require calibration to be

> >>>>> done after every USB HCD reset. Generic PHY framework has been already

> >>>>> extended with phy_calibrate() function in commit 36914111e682 ("drivers:

> >>>>> phy: add calibrate method"). This patch adds support for it to generic

> >>>>> PHY handling code in USB HCD core.

> >>>>>

> >>>>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

> >>>>> Tested-by: Anand Moon <linux.amoon@gmail.com>

> >>>>> Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de>

> >>>> Greg: any chance to give it this a try in -next? If not, maybe You can

> >>>> point someone whose review will help?

> >>> Ah crap, this is me, not the PHY maintainer :(

> >>>

> >>> Can you resend this and I will be glad to review it.  But it would also

> >>> be good to get Felipe's review as well.

> >> No problem, I will resend it again in a few minutes. Felipe already

> >> acked it: https://lkml.org/lkml/2019/8/8/460

> > I don't see the resend, did I miss it?

> 

> I looks so: https://lkml.org/lkml/2019/8/29/31


Got it now, thanks.

greg k-h
diff mbox series

Patch

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 88533938ce19..b89936c1df23 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2291,6 +2291,9 @@  int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 	hcd->state = HC_STATE_RESUMING;
 	status = hcd->driver->bus_resume(hcd);
 	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
+	if (status == 0)
+		status = usb_phy_roothub_calibrate(hcd->phy_roothub);
+
 	if (status == 0) {
 		struct usb_device *udev;
 		int port1;
@@ -2864,6 +2867,10 @@  int usb_add_hcd(struct usb_hcd *hcd,
 	}
 	hcd->rh_pollable = 1;
 
+	retval = usb_phy_roothub_calibrate(hcd->phy_roothub);
+	if (retval)
+		goto err_hcd_driver_setup;
+
 	/* NOTE: root hub and controller capabilities may not be the same */
 	if (device_can_wakeup(hcd->self.controller)
 			&& device_can_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c
index 7580493b867a..fb1588e7c282 100644
--- a/drivers/usb/core/phy.c
+++ b/drivers/usb/core/phy.c
@@ -151,6 +151,27 @@  int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
 }
 EXPORT_SYMBOL_GPL(usb_phy_roothub_set_mode);
 
+int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct list_head *head;
+	int err;
+
+	if (!phy_roothub)
+		return 0;
+
+	head = &phy_roothub->list;
+
+	list_for_each_entry(roothub_entry, head, list) {
+		err = phy_calibrate(roothub_entry->phy);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate);
+
 int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub)
 {
 	struct usb_phy_roothub *roothub_entry;
diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h
index dad564e2d2d4..20a267cd986b 100644
--- a/drivers/usb/core/phy.h
+++ b/drivers/usb/core/phy.h
@@ -18,6 +18,7 @@  int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
 
 int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
 			     enum phy_mode mode);
+int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub);
 int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
 void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);