diff mbox series

[1/5] dt-bindings: clock: Add Bitmain BM1880 SoC clock controller binding

Message ID 20190705151440.20844-2-manivannan.sadhasivam@linaro.org
State New
Headers show
Series Add Bitmain BM1880 clock driver | expand

Commit Message

Manivannan Sadhasivam July 5, 2019, 3:14 p.m. UTC
Add devicetree binding for Bitmain BM1880 SoC clock controller.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 .../bindings/clock/bitmain,bm1880-clk.txt     | 47 +++++++++++
 include/dt-bindings/clock/bm1880-clock.h      | 82 +++++++++++++++++++
 2 files changed, 129 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt
 create mode 100644 include/dt-bindings/clock/bm1880-clock.h

-- 
2.17.1

Comments

Rob Herring (Arm) July 24, 2019, 4:18 p.m. UTC | #1
On Fri, Jul 05, 2019 at 08:44:36PM +0530, Manivannan Sadhasivam wrote:
> Add devicetree binding for Bitmain BM1880 SoC clock controller.

> 

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---

>  .../bindings/clock/bitmain,bm1880-clk.txt     | 47 +++++++++++

>  include/dt-bindings/clock/bm1880-clock.h      | 82 +++++++++++++++++++

>  2 files changed, 129 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt

>  create mode 100644 include/dt-bindings/clock/bm1880-clock.h

> 

> diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt

> new file mode 100644

> index 000000000000..9c967095d430

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt

> @@ -0,0 +1,47 @@

> +* Bitmain BM1880 Clock Controller

> +

> +The Bitmain BM1880 clock controler generates and supplies clock to


checkpatch.pl reports a spelling error...

> +various peripherals within the SoC.

> +

> +Required Properties:

> +

> +- compatible: Should be "bitmain,bm1880-clk"

> +- reg :	Register address and size of PLL and SYS control domains

> +- reg-names : Register domain names: "pll" and "sys"

> +- clocks : Phandle of the input reference clock.

> +- #clock-cells: Should be 1.

> +

> +Each clock is assigned an identifier, and client nodes can use this identifier

> +to specify the clock which they consume.

> +

> +All available clocks are defined as preprocessor macros in corresponding

> +dt-bindings/clock/bm1880-clock.h header and can be used in device tree sources.

> +

> +External clocks:

> +

> +The osc clock used as the input for the plls is generated outside the SoC.

> +It is expected that it is defined using standard clock bindings as "osc".

> +

> +Example: 

> +

> +        clk: clock-controller@800 {


Usually the unit-address is from the first entry.

> +                compatible = "bitmain,bm1880-clk";

> +                reg = <0xe8 0x0c>,<0x800 0xb0>;


space                                ^

> +                reg-names = "pll", "sys";

> +                clocks = <&osc>;

> +                #clock-cells = <1>;

> +        };

> +

> +Example: UART controller node that consumes clock generated by the clock

> +controller:

> +

> +        uart0: serial@58018000 {

> +                compatible = "snps,dw-apb-uart";

> +                reg = <0x0 0x58018000 0x0 0x2000>;

> +                clocks = <&clk BM1880_CLK_UART_500M>;

> +                         <&clk BM1880_CLK_APB_UART>;

> +                clock-names = "baudclk", "apb_pclk";

> +                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;

> +                reg-shift = <2>;

> +                reg-io-width = <4>;

> +        };

> diff --git a/include/dt-bindings/clock/bm1880-clock.h b/include/dt-bindings/clock/bm1880-clock.h

> new file mode 100644

> index 000000000000..764472b9a4fd

> --- /dev/null

> +++ b/include/dt-bindings/clock/bm1880-clock.h

> @@ -0,0 +1,82 @@

> +/* SPDX-License-Identifier: GPL-2.0 */

> +/*

> + * Device Tree binding constants for Bitmain BM1880 SoC

> + *

> + * Copyright (c) 2019 Linaro Ltd.

> + */

> +

> +#ifndef __DT_BINDINGS_CLOCK_BM1880_H

> +#define __DT_BINDINGS_CLOCK_BM1880_H

> +

> +#define BM1880_CLK_OSC			0

> +#define BM1880_CLK_MPLL			1

> +#define BM1880_CLK_SPLL			2

> +#define BM1880_CLK_FPLL			3

> +#define BM1880_CLK_DDRPLL 		4


space before tab

> +#define BM1880_CLK_A53			5

> +#define BM1880_CLK_50M_A53		6

> +#define BM1880_CLK_AHB_ROM		7

> +#define BM1880_CLK_AXI_SRAM		8

> +#define BM1880_CLK_DDR_AXI		9

> +#define BM1880_CLK_EFUSE		10

> +#define BM1880_CLK_APB_EFUSE		11

> +#define BM1880_CLK_AXI5_EMMC		12

> +#define BM1880_CLK_EMMC			13

> +#define BM1880_CLK_100K_EMMC		14

> +#define BM1880_CLK_AXI5_SD		15

> +#define BM1880_CLK_SD			16

> +#define BM1880_CLK_100K_SD		17

> +#define BM1880_CLK_500M_ETH0		18

> +#define BM1880_CLK_AXI4_ETH0		19

> +#define BM1880_CLK_500M_ETH1		20

> +#define BM1880_CLK_AXI4_ETH1		21

> +#define BM1880_CLK_AXI1_GDMA		22

> +#define BM1880_CLK_APB_GPIO		23

> +#define BM1880_CLK_APB_GPIO_INTR	24

> +#define BM1880_CLK_GPIO_DB		25

> +#define BM1880_CLK_AXI1_MINER		26

> +#define BM1880_CLK_AHB_SF		27

> +#define BM1880_CLK_SDMA_AXI		28

> +#define BM1880_CLK_SDMA_AUD		29

> +#define BM1880_CLK_APB_I2C		30

> +#define BM1880_CLK_APB_WDT		31

> +#define BM1880_CLK_APB_JPEG		32

> +#define BM1880_CLK_JPEG_AXI		33

> +#define BM1880_CLK_AXI5_NF		34

> +#define BM1880_CLK_APB_NF		35

> +#define BM1880_CLK_NF			36

> +#define BM1880_CLK_APB_PWM		37

> +#define BM1880_CLK_DIV_0_RV		38

> +#define BM1880_CLK_DIV_1_RV		39

> +#define BM1880_CLK_MUX_RV		40

> +#define BM1880_CLK_RV			41

> +#define BM1880_CLK_APB_SPI		42

> +#define BM1880_CLK_TPU_AXI		43

> +#define BM1880_CLK_DIV_UART_500M	44

> +#define BM1880_CLK_UART_500M		45

> +#define BM1880_CLK_APB_UART		46

> +#define BM1880_CLK_APB_I2S		47

> +#define BM1880_CLK_AXI4_USB		48

> +#define BM1880_CLK_APB_USB		49

> +#define BM1880_CLK_125M_USB		50

> +#define BM1880_CLK_33K_USB		51

> +#define BM1880_CLK_DIV_12M_USB		52

> +#define BM1880_CLK_12M_USB		53

> +#define BM1880_CLK_APB_VIDEO		54

> +#define BM1880_CLK_VIDEO_AXI		55

> +#define BM1880_CLK_VPP_AXI		56

> +#define BM1880_CLK_APB_VPP		57

> +#define BM1880_CLK_DIV_0_AXI1		58

> +#define BM1880_CLK_DIV_1_AXI1		59

> +#define BM1880_CLK_AXI1			60

> +#define BM1880_CLK_AXI2			61

> +#define BM1880_CLK_AXI3			62

> +#define BM1880_CLK_AXI4			63

> +#define BM1880_CLK_AXI5			64

> +#define BM1880_CLK_DIV_0_AXI6		65

> +#define BM1880_CLK_DIV_1_AXI6		66

> +#define BM1880_CLK_MUX_AXI6		67

> +#define BM1880_CLK_AXI6			68

> +#define BM1880_NR_CLKS			69

> +

> +#endif /* __DT_BINDINGS_CLOCK_BM1880_H */

> -- 

> 2.17.1

>
Stephen Boyd Aug. 8, 2019, 5:01 a.m. UTC | #2
Quoting Manivannan Sadhasivam (2019-07-05 08:14:36)
> Add devicetree binding for Bitmain BM1880 SoC clock controller.

> 

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---

>  .../bindings/clock/bitmain,bm1880-clk.txt     | 47 +++++++++++


Can you convert this to YAML? It's all the rage right now.

>  include/dt-bindings/clock/bm1880-clock.h      | 82 +++++++++++++++++++

>  2 files changed, 129 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt

>  create mode 100644 include/dt-bindings/clock/bm1880-clock.h

> 

> diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt

> new file mode 100644

> index 000000000000..9c967095d430

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt

> @@ -0,0 +1,47 @@

> +* Bitmain BM1880 Clock Controller

> +

> +The Bitmain BM1880 clock controler generates and supplies clock to

> +various peripherals within the SoC.

> +

> +Required Properties:

> +

> +- compatible: Should be "bitmain,bm1880-clk"

> +- reg :        Register address and size of PLL and SYS control domains

> +- reg-names : Register domain names: "pll" and "sys"

> +- clocks : Phandle of the input reference clock.

> +- #clock-cells: Should be 1.

> +

> +Each clock is assigned an identifier, and client nodes can use this identifier

> +to specify the clock which they consume.

> +

> +All available clocks are defined as preprocessor macros in corresponding

> +dt-bindings/clock/bm1880-clock.h header and can be used in device tree sources.

> +

> +External clocks:

> +

> +The osc clock used as the input for the plls is generated outside the SoC.

> +It is expected that it is defined using standard clock bindings as "osc".

> +

> +Example: 

> +

> +        clk: clock-controller@800 {

> +                compatible = "bitmain,bm1880-clk";

> +                reg = <0xe8 0x0c>,<0x800 0xb0>;


It looks weird still. What hardware module is this actually part of?
Some larger power manager block?

> +                reg-names = "pll", "sys";

> +                clocks = <&osc>;

> +                #clock-cells = <1>;

> +        };

> +
Manivannan Sadhasivam Aug. 17, 2019, 3:34 a.m. UTC | #3
Hi Stephen,

On Wed, Aug 07, 2019 at 10:01:28PM -0700, Stephen Boyd wrote:
> Quoting Manivannan Sadhasivam (2019-07-05 08:14:36)

> > Add devicetree binding for Bitmain BM1880 SoC clock controller.

> > 

> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> > ---

> >  .../bindings/clock/bitmain,bm1880-clk.txt     | 47 +++++++++++

> 

> Can you convert this to YAML? It's all the rage right now.

> 


Sure.

> >  include/dt-bindings/clock/bm1880-clock.h      | 82 +++++++++++++++++++

> >  2 files changed, 129 insertions(+)

> >  create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt

> >  create mode 100644 include/dt-bindings/clock/bm1880-clock.h

> > 

> > diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt

> > new file mode 100644

> > index 000000000000..9c967095d430

> > --- /dev/null

> > +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt

> > @@ -0,0 +1,47 @@

> > +* Bitmain BM1880 Clock Controller

> > +

> > +The Bitmain BM1880 clock controler generates and supplies clock to

> > +various peripherals within the SoC.

> > +

> > +Required Properties:

> > +

> > +- compatible: Should be "bitmain,bm1880-clk"

> > +- reg :        Register address and size of PLL and SYS control domains

> > +- reg-names : Register domain names: "pll" and "sys"

> > +- clocks : Phandle of the input reference clock.

> > +- #clock-cells: Should be 1.

> > +

> > +Each clock is assigned an identifier, and client nodes can use this identifier

> > +to specify the clock which they consume.

> > +

> > +All available clocks are defined as preprocessor macros in corresponding

> > +dt-bindings/clock/bm1880-clock.h header and can be used in device tree sources.

> > +

> > +External clocks:

> > +

> > +The osc clock used as the input for the plls is generated outside the SoC.

> > +It is expected that it is defined using standard clock bindings as "osc".

> > +

> > +Example: 

> > +

> > +        clk: clock-controller@800 {

> > +                compatible = "bitmain,bm1880-clk";

> > +                reg = <0xe8 0x0c>,<0x800 0xb0>;

> 

> It looks weird still. What hardware module is this actually part of?

> Some larger power manager block?

> 


These are all part of the sysctrl block (clock + pinctrl + reset) and the
register domains got split between system and pll.

Thanks,
Mani

> > +                reg-names = "pll", "sys";

> > +                clocks = <&osc>;

> > +                #clock-cells = <1>;

> > +        };

> > +
Manivannan Sadhasivam Aug. 17, 2019, 3:58 a.m. UTC | #4
On Fri, Aug 16, 2019 at 08:46:11PM -0700, Stephen Boyd wrote:
> Quoting Manivannan Sadhasivam (2019-08-16 20:34:22)

> > On Wed, Aug 07, 2019 at 10:01:28PM -0700, Stephen Boyd wrote:

> > > Quoting Manivannan Sadhasivam (2019-07-05 08:14:36)

> > > > +It is expected that it is defined using standard clock bindings as "osc".

> > > > +

> > > > +Example: 

> > > > +

> > > > +        clk: clock-controller@800 {

> > > > +                compatible = "bitmain,bm1880-clk";

> > > > +                reg = <0xe8 0x0c>,<0x800 0xb0>;

> > > 

> > > It looks weird still. What hardware module is this actually part of?

> > > Some larger power manager block?

> > > 

> > 

> > These are all part of the sysctrl block (clock + pinctrl + reset) and the

> > register domains got split between system and pll.

> > 

> 

> And that can't be one node that probes the clk, pinctrl, and reset

> drivers from C code?


It is not a MFD for sure. It's just grouping of the register domains together.

Thanks,
Mani
>
Stephen Boyd Aug. 18, 2019, 1:16 a.m. UTC | #5
Quoting Manivannan Sadhasivam (2019-08-16 20:58:45)
> On Fri, Aug 16, 2019 at 08:46:11PM -0700, Stephen Boyd wrote:

> > Quoting Manivannan Sadhasivam (2019-08-16 20:34:22)

> > > On Wed, Aug 07, 2019 at 10:01:28PM -0700, Stephen Boyd wrote:

> > > > Quoting Manivannan Sadhasivam (2019-07-05 08:14:36)

> > > > > +It is expected that it is defined using standard clock bindings as "osc".

> > > > > +

> > > > > +Example: 

> > > > > +

> > > > > +        clk: clock-controller@800 {

> > > > > +                compatible = "bitmain,bm1880-clk";

> > > > > +                reg = <0xe8 0x0c>,<0x800 0xb0>;

> > > > 

> > > > It looks weird still. What hardware module is this actually part of?

> > > > Some larger power manager block?

> > > > 

> > > 

> > > These are all part of the sysctrl block (clock + pinctrl + reset) and the

> > > register domains got split between system and pll.

> > > 

> > 

> > And that can't be one node that probes the clk, pinctrl, and reset

> > drivers from C code?

> 

> It is not a MFD for sure. It's just grouping of the register domains together.

> 


Are there datasheets? I'm not saying it's an "MFD", just saying that
it's one hardware IP block delivered by the SoC integrator. It's
already odd that there are two register properties.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt
new file mode 100644
index 000000000000..9c967095d430
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt
@@ -0,0 +1,47 @@ 
+* Bitmain BM1880 Clock Controller
+
+The Bitmain BM1880 clock controler generates and supplies clock to
+various peripherals within the SoC.
+
+Required Properties:
+
+- compatible: Should be "bitmain,bm1880-clk"
+- reg :	Register address and size of PLL and SYS control domains
+- reg-names : Register domain names: "pll" and "sys"
+- clocks : Phandle of the input reference clock.
+- #clock-cells: Should be 1.
+
+Each clock is assigned an identifier, and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in corresponding
+dt-bindings/clock/bm1880-clock.h header and can be used in device tree sources.
+
+External clocks:
+
+The osc clock used as the input for the plls is generated outside the SoC.
+It is expected that it is defined using standard clock bindings as "osc".
+
+Example: 
+
+        clk: clock-controller@800 {
+                compatible = "bitmain,bm1880-clk";
+                reg = <0xe8 0x0c>,<0x800 0xb0>;
+                reg-names = "pll", "sys";
+                clocks = <&osc>;
+                #clock-cells = <1>;
+        };
+
+Example: UART controller node that consumes clock generated by the clock
+controller:
+
+        uart0: serial@58018000 {
+                compatible = "snps,dw-apb-uart";
+                reg = <0x0 0x58018000 0x0 0x2000>;
+                clocks = <&clk BM1880_CLK_UART_500M>;
+                         <&clk BM1880_CLK_APB_UART>;
+                clock-names = "baudclk", "apb_pclk";
+                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                reg-shift = <2>;
+                reg-io-width = <4>;
+        };
diff --git a/include/dt-bindings/clock/bm1880-clock.h b/include/dt-bindings/clock/bm1880-clock.h
new file mode 100644
index 000000000000..764472b9a4fd
--- /dev/null
+++ b/include/dt-bindings/clock/bm1880-clock.h
@@ -0,0 +1,82 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree binding constants for Bitmain BM1880 SoC
+ *
+ * Copyright (c) 2019 Linaro Ltd.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BM1880_H
+#define __DT_BINDINGS_CLOCK_BM1880_H
+
+#define BM1880_CLK_OSC			0
+#define BM1880_CLK_MPLL			1
+#define BM1880_CLK_SPLL			2
+#define BM1880_CLK_FPLL			3
+#define BM1880_CLK_DDRPLL 		4
+#define BM1880_CLK_A53			5
+#define BM1880_CLK_50M_A53		6
+#define BM1880_CLK_AHB_ROM		7
+#define BM1880_CLK_AXI_SRAM		8
+#define BM1880_CLK_DDR_AXI		9
+#define BM1880_CLK_EFUSE		10
+#define BM1880_CLK_APB_EFUSE		11
+#define BM1880_CLK_AXI5_EMMC		12
+#define BM1880_CLK_EMMC			13
+#define BM1880_CLK_100K_EMMC		14
+#define BM1880_CLK_AXI5_SD		15
+#define BM1880_CLK_SD			16
+#define BM1880_CLK_100K_SD		17
+#define BM1880_CLK_500M_ETH0		18
+#define BM1880_CLK_AXI4_ETH0		19
+#define BM1880_CLK_500M_ETH1		20
+#define BM1880_CLK_AXI4_ETH1		21
+#define BM1880_CLK_AXI1_GDMA		22
+#define BM1880_CLK_APB_GPIO		23
+#define BM1880_CLK_APB_GPIO_INTR	24
+#define BM1880_CLK_GPIO_DB		25
+#define BM1880_CLK_AXI1_MINER		26
+#define BM1880_CLK_AHB_SF		27
+#define BM1880_CLK_SDMA_AXI		28
+#define BM1880_CLK_SDMA_AUD		29
+#define BM1880_CLK_APB_I2C		30
+#define BM1880_CLK_APB_WDT		31
+#define BM1880_CLK_APB_JPEG		32
+#define BM1880_CLK_JPEG_AXI		33
+#define BM1880_CLK_AXI5_NF		34
+#define BM1880_CLK_APB_NF		35
+#define BM1880_CLK_NF			36
+#define BM1880_CLK_APB_PWM		37
+#define BM1880_CLK_DIV_0_RV		38
+#define BM1880_CLK_DIV_1_RV		39
+#define BM1880_CLK_MUX_RV		40
+#define BM1880_CLK_RV			41
+#define BM1880_CLK_APB_SPI		42
+#define BM1880_CLK_TPU_AXI		43
+#define BM1880_CLK_DIV_UART_500M	44
+#define BM1880_CLK_UART_500M		45
+#define BM1880_CLK_APB_UART		46
+#define BM1880_CLK_APB_I2S		47
+#define BM1880_CLK_AXI4_USB		48
+#define BM1880_CLK_APB_USB		49
+#define BM1880_CLK_125M_USB		50
+#define BM1880_CLK_33K_USB		51
+#define BM1880_CLK_DIV_12M_USB		52
+#define BM1880_CLK_12M_USB		53
+#define BM1880_CLK_APB_VIDEO		54
+#define BM1880_CLK_VIDEO_AXI		55
+#define BM1880_CLK_VPP_AXI		56
+#define BM1880_CLK_APB_VPP		57
+#define BM1880_CLK_DIV_0_AXI1		58
+#define BM1880_CLK_DIV_1_AXI1		59
+#define BM1880_CLK_AXI1			60
+#define BM1880_CLK_AXI2			61
+#define BM1880_CLK_AXI3			62
+#define BM1880_CLK_AXI4			63
+#define BM1880_CLK_AXI5			64
+#define BM1880_CLK_DIV_0_AXI6		65
+#define BM1880_CLK_DIV_1_AXI6		66
+#define BM1880_CLK_MUX_AXI6		67
+#define BM1880_CLK_AXI6			68
+#define BM1880_NR_CLKS			69
+
+#endif /* __DT_BINDINGS_CLOCK_BM1880_H */