diff mbox series

[v3] libdrm: modetest: Allow selecting modes by index

Message ID 20190627213707.46094-1-john.stultz@linaro.org
State New
Headers show
Series [v3] libdrm: modetest: Allow selecting modes by index | expand

Commit Message

John Stultz June 27, 2019, 9:37 p.m. UTC 
Often there are many similar modes, which cannot be selected
via modetest due to its simple string matching.

This change adds a mode index in the display output, which can
then be used to specify a specific modeline to be set.

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

Signed-off-by: John Stultz <john.stultz@linaro.org>

---
v2: Reworked mode_str check per Ilia's suggestion
v3: Added index < 0 check per Ilia's suggestion
---
 tests/modetest/modetest.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

-- 
2.17.1

Comments

Emil Velikov Jan. 21, 2020, 6:42 p.m. UTC | #1 
On Thu, 27 Jun 2019 at 22:37, John Stultz <john.stultz@linaro.org> wrote:
>

> Often there are many similar modes, which cannot be selected

> via modetest due to its simple string matching.

>

> This change adds a mode index in the display output, which can

> then be used to specify a specific modeline to be set.

>

> Cc: Ilia Mirkin <imirkin@alum.mit.edu>

> Cc: Rob Clark <robdclark@chromium.org>

> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>

> Cc: Sumit Semwal <sumit.semwal@linaro.org>

> Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

> Signed-off-by: John Stultz <john.stultz@linaro.org>

> ---

> v2: Reworked mode_str check per Ilia's suggestion

> v3: Added index < 0 check per Ilia's suggestion

> ---

>  tests/modetest/modetest.c | 23 +++++++++++++++++------

>  1 file changed, 17 insertions(+), 6 deletions(-)

>

> diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c

> index 9c85c07b..5e1b623a 100644

> --- a/tests/modetest/modetest.c

> +++ b/tests/modetest/modetest.c

> @@ -204,9 +204,10 @@ static void dump_encoders(struct device *dev)

>         printf("\n");

>  }

>

> -static void dump_mode(drmModeModeInfo *mode)

> +static void dump_mode(drmModeModeInfo *mode, int index)

>  {

> -       printf("  %s %d %d %d %d %d %d %d %d %d %d",

> +       printf("  #%i %s %d %d %d %d %d %d %d %d %d %d",

> +              index,

>                mode->name,

>                mode->vrefresh,

>                mode->hdisplay,


Thanks John.
Resolved a minor conflict in the above hunk and pushed to master.

Emil
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff mbox series

Patch

diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
index 9c85c07b..5e1b623a 100644
--- a/tests/modetest/modetest.c
+++ b/tests/modetest/modetest.c
@@ -204,9 +204,10 @@  static void dump_encoders(struct device *dev)
 	printf("\n");
 }
 
-static void dump_mode(drmModeModeInfo *mode)
+static void dump_mode(drmModeModeInfo *mode, int index)
 {
-	printf("  %s %d %d %d %d %d %d %d %d %d %d",
+	printf("  #%i %s %d %d %d %d %d %d %d %d %d %d",
+	       index,
 	       mode->name,
 	       mode->vrefresh,
 	       mode->hdisplay,
@@ -443,10 +444,10 @@  static void dump_connectors(struct device *dev)
 
 		if (connector->count_modes) {
 			printf("  modes:\n");
-			printf("\tname refresh (Hz) hdisp hss hse htot vdisp "
+			printf("\tindex name refresh (Hz) hdisp hss hse htot vdisp "
 			       "vss vse vtot)\n");
 			for (j = 0; j < connector->count_modes; j++)
-				dump_mode(&connector->modes[j]);
+				dump_mode(&connector->modes[j], j);
 		}
 
 		if (_connector->props) {
@@ -478,7 +479,7 @@  static void dump_crtcs(struct device *dev)
 		       crtc->buffer_id,
 		       crtc->x, crtc->y,
 		       crtc->width, crtc->height);
-		dump_mode(&crtc->mode);
+		dump_mode(&crtc->mode, 0);
 
 		if (_crtc->props) {
 			printf("  props:\n");
@@ -829,6 +830,16 @@  connector_find_mode(struct device *dev, uint32_t con_id, const char *mode_str,
 	if (!connector || !connector->count_modes)
 		return NULL;
 
+	/* Pick by Index */
+	if (mode_str[0] == '#') {
+		int index = atoi(mode_str + 1);
+
+		if (index >= connector->count_modes || index < 0)
+			return NULL;
+		return &connector->modes[index];
+	}
+
+	/* Pick by Name */
 	for (i = 0; i < connector->count_modes; i++) {
 		mode = &connector->modes[i];
 		if (!strcmp(mode->name, mode_str)) {
@@ -1752,7 +1763,7 @@  static void usage(char *name)
 
 	fprintf(stderr, "\n Test options:\n\n");
 	fprintf(stderr, "\t-P <plane_id>@<crtc_id>:<w>x<h>[+<x>+<y>][*<scale>][@<format>]\tset a plane\n");
-	fprintf(stderr, "\t-s <connector_id>[,<connector_id>][@<crtc_id>]:<mode>[-<vrefresh>][@<format>]\tset a mode\n");
+	fprintf(stderr, "\t-s <connector_id>[,<connector_id>][@<crtc_id>]:[#<mode index>]<mode>[-<vrefresh>][@<format>]\tset a mode\n");
 	fprintf(stderr, "\t-C\ttest hw cursor\n");
 	fprintf(stderr, "\t-v\ttest vsynced page flipping\n");
 	fprintf(stderr, "\t-w <obj_id>:<prop_name>:<value>\tset property\n");