diff mbox series

[v4,5/5] arm64: dts: qcs404: Add interconnect provider DT nodes

Message ID 20190613151323.10850-6-georgi.djakov@linaro.org
State New
Headers show
Series Add QCS404 interconnect provider driver | expand

Commit Message

Georgi Djakov June 13, 2019, 3:13 p.m. UTC 
Add the DT nodes for the network-on-chip interconnect buses found
on qcs404-based platforms.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

---

v4:
- Insert the NoC DT nodes after rng@ to keep the nodes sorted by address.
- Pick Bjorn's r-b.

v3:
- Update according to the new binding: add reg property and moved under the
  "soc" node.

 arch/arm64/boot/dts/qcom/qcs404.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index ffedf9640af7..da1dbf515bd9 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1,6 +1,7 @@ 
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2018, Linaro Limited
 
+#include <dt-bindings/interconnect/qcom,qcs404.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-qcs404.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -266,6 +267,33 @@ 
 			clock-names = "core";
 		};
 
+		bimc: interconnect@400000 {
+			reg = <0x00400000 0x80000>;
+			compatible = "qcom,qcs404-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus_clk", "bus_a_clk";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				<&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		pcnoc: interconnect@500000 {
+			reg = <0x00500000 0x15080>;
+			compatible = "qcom,qcs404-pcnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus_clk", "bus_a_clk";
+			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+				<&rpmcc RPM_SMD_PNOC_A_CLK>;
+		};
+
+		snoc: interconnect@580000 {
+			reg = <0x00580000 0x23080>;
+			compatible = "qcom,qcs404-snoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus_clk", "bus_a_clk";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				<&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,qcs404-pinctrl";
 			reg = <0x01000000 0x200000>,