@@ -489,10 +489,8 @@ static int cdns_pcie_ep_probe(struct platform_device *pdev)
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
- if (!res) {
- dev_err(dev, "missing \"mem\"\n");
- return -EINVAL;
- }
+ if (!res)
+ dev_dbg(dev, "missing \"mem\"\n");
pcie->mem_res = res;
ret = of_property_read_u32(np, "cdns,max-outbound-regions",
@@ -188,9 +188,9 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
struct device *dev = rc->dev;
struct device_node *np = dev->of_node;
struct of_pci_range_parser parser;
+ u64 cpu_addr = cfg_res->start;
struct of_pci_range range;
u32 addr0, addr1, desc1;
- u64 cpu_addr;
int r, err;
/*
@@ -203,7 +203,8 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_PCI_ADDR1(0), addr1);
cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC1(0), desc1);
- cpu_addr = cfg_res->start - mem_res->start;
+ if (mem_res)
+ cpu_addr -= mem_res->start;
addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(12) |
(lower_32_bits(cpu_addr) & GENMASK(31, 8));
addr1 = upper_32_bits(cpu_addr);
@@ -154,7 +154,8 @@ void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 fn,
cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC1(r), desc1);
/* Set the CPU address */
- cpu_addr -= pcie->mem_res->start;
+ if (pcie->mem_res)
+ cpu_addr -= pcie->mem_res->start;
addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(nbits) |
(lower_32_bits(cpu_addr) & GENMASK(31, 8));
addr1 = upper_32_bits(cpu_addr);
@@ -181,7 +182,8 @@ void cdns_pcie_set_outbound_region_for_normal_msg(struct cdns_pcie *pcie, u8 fn,
}
/* Set the CPU address */
- cpu_addr -= pcie->mem_res->start;
+ if (pcie->mem_res)
+ cpu_addr -= pcie->mem_res->start;
addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(17) |
(lower_32_bits(cpu_addr) & GENMASK(31, 8));
addr1 = upper_32_bits(cpu_addr);
Cadence driver uses "mem" memory resource to obtain the offset of configuration space address region, memory space address region and message space address region. The obtained offset is used to program the Address Translation Unit (ATU). However certain platforms like TI's J721E SoC require the absolute address to be programmed in the and not just the offset. Make "mem" an optional memory resource and use it only for platforms that populate it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/pci/controller/pcie-cadence-ep.c | 6 ++---- drivers/pci/controller/pcie-cadence-host.c | 5 +++-- drivers/pci/controller/pcie-cadence.c | 6 ++++-- 3 files changed, 9 insertions(+), 8 deletions(-) -- 2.17.1