diff mbox series

[v2] PCI: qcom: Ensure that PERST is asserted for at least 100 ms

Message ID 20190529094352.5961-1-niklas.cassel@linaro.org
State Accepted
Commit 64adde31c8e996a6db6f7a1a4131180e363aa9f2
Headers show
Series [v2] PCI: qcom: Ensure that PERST is asserted for at least 100 ms | expand

Commit Message

Niklas Cassel May 29, 2019, 9:43 a.m. UTC
Currently, there is only a 1 ms sleep after asserting PERST.

Reading the datasheets for different endpoints, some require PERST to be
asserted for 10 ms in order for the endpoint to perform a reset, others
require it to be asserted for 50 ms.

Several SoCs using this driver uses PCIe Mini Card, where we don't know
what endpoint will be plugged in.

The PCI Express Card Electromechanical Specification specifies:
"On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from
the power rails achieving specified operating limits."

Add a sleep of 100 ms before deasserting PERST, in order to ensure that
we are compliant with the spec.

Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>

Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>

Cc: stable@vger.kernel.org # 4.5+
---
Changes since v1:
Move the sleep into qcom_ep_reset_deassert()

 drivers/pci/controller/dwc/pcie-qcom.c | 2 ++
 1 file changed, 2 insertions(+)

-- 
2.21.0

Comments

Bjorn Helgaas May 29, 2019, 12:52 p.m. UTC | #1
On Wed, May 29, 2019 at 11:43:52AM +0200, Niklas Cassel wrote:
> Currently, there is only a 1 ms sleep after asserting PERST.

> 

> Reading the datasheets for different endpoints, some require PERST to be

> asserted for 10 ms in order for the endpoint to perform a reset, others

> require it to be asserted for 50 ms.

> 

> Several SoCs using this driver uses PCIe Mini Card, where we don't know

> what endpoint will be plugged in.


I think this patch is absolutely the right thing to do.  We don't know
what might be plugged in, so we should support arbitrary endpoints.

One could imagine some sort of DT property to identify closed
environments where there is no need to support arbitrary endpoints and
it might be desirable to reduce the delay.  But that should wait
until there's a need for it and if the need *does* arise, hopefully
the definition of such a property could be generic across all SoCs.

> The PCI Express Card Electromechanical Specification specifies:

> "On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from

> the power rails achieving specified operating limits."


It'd be nice to include the complete citation, i.e., "PCI Express Card
Electromechanical Specification r2.0, sec 2.2"

> Add a sleep of 100 ms before deasserting PERST, in order to ensure that

> we are compliant with the spec.

> 

> Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")

> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>

> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>

> Cc: stable@vger.kernel.org # 4.5+

> ---

> Changes since v1:

> Move the sleep into qcom_ep_reset_deassert()

> 

>  drivers/pci/controller/dwc/pcie-qcom.c | 2 ++

>  1 file changed, 2 insertions(+)

> 

> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c

> index 0ed235d560e3..5d1713069d14 100644

> --- a/drivers/pci/controller/dwc/pcie-qcom.c

> +++ b/drivers/pci/controller/dwc/pcie-qcom.c

> @@ -178,6 +178,8 @@ static void qcom_ep_reset_assert(struct qcom_pcie *pcie)

>  

>  static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)

>  {

> +	/* Ensure that PERST has been asserted for at least 100 ms */

> +	msleep(100);

>  	gpiod_set_value_cansleep(pcie->reset, 0);

>  	usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);

>  }

> -- 

> 2.21.0

>
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 0ed235d560e3..5d1713069d14 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -178,6 +178,8 @@  static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
 
 static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
 {
+	/* Ensure that PERST has been asserted for at least 100 ms */
+	msleep(100);
 	gpiod_set_value_cansleep(pcie->reset, 0);
 	usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
 }