@@ -169,4 +169,37 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ mmc@12200000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12200000 0x1000>;
+ interrupts = <0 75 0>;
+ };
+
+ mmc@12210000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12210000 0x1000>;
+ interrupts = <0 76 0>;
+ };
+
+ mmc@12220000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12220000 0x1000>;
+ interrupts = <0 77 0>;
+ };
+
+ mmc@12230000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12230000 0x1000>;
+ interrupts = <0 78 0>;
+ };
+
};
@@ -30,6 +30,10 @@
spi2 = "/spi@12d40000";
spi3 = "/spi@131a0000";
spi4 = "/spi@131b0000";
+ mmc0 = "/mmc@12200000";
+ mmc1 = "/mmc@12210000";
+ mmc2 = "/mmc@12220000";
+ mmc3 = "/mmc@12230000";
};
sromc@12250000 {
@@ -119,4 +123,24 @@
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
};
+
+ mmc@12200000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <1 3 3>;
+ samsung,removable = <0>;
+ };
+
+ mmc@12210000 {
+ status = "disabled";
+ };
+
+ mmc@12220000 {
+ samsung,bus-width = <4>;
+ samsung,timing = <1 2 3>;
+ samsung,removable = <1>;
+ };
+
+ mmc@12230000 {
+ status = "disabled";
+ };
};
new file mode 100644
@@ -0,0 +1,54 @@
+* Exynos 5250 DWC_mobile_storage
+
+The Exynos 5250 provides DWC_mobile_storage interface which supports
+. Embedded Multimedia Cards (EMMC-version 4.5)
+. Secure Digital memory (SD mem-version 2.0)
+. Secure Digital I/O (SDIO-version 3.0)
+. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1)
+
+The Exynos 5250 DWC_mobile_storage provides four channels.
+SOC specific and Board specific properties are channel specific.
+
+Required SoC Specific Properties:
+
+- compatible: should be
+ - samsung,exynos5250-dwmmc: for exynos5250 platforms
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu.
+
+Required Board Specific Properties:
+
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- samsung,bus-width: The width of the bus used to interface the devices
+ supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO).
+ . Typically the bus width is 4 or 8.
+- samsung,timing: The timing values to be written into the
+ Drv/sample clock selection register of corresponding channel.
+ . It is comprised of 3 values corresponding to the 3 fileds
+ 'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register.
+ . SelClk_sample: Select sample clock among 8 shifted clocks.
+ . SelClk_drv: Select drv clock among 8 shifted clocks.
+ . DIVRATIO: Clock Divide ratio select.
+ . The above 3 values are used by the clock phase shifter.
+
+Example:
+
+mmc@12200000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <1 3 3>;
+ samsung,removable = <1>;
+}
+In the above example,
+ . The bus width is 8
+ . Timing is comprised of 3 values as explained below
+ 1 - SelClk_sample
+ 3 - SelClk_drv
+ 3 - DIVRATIO
+ . The 'removable' flag indicates whether the the particilar device
+ cannot be removed (always present) or it is a removable device.
+ 1 - Indicates that the device is removable.
+ 0 - Indicates that the device cannot be removed.