[04/18] soc: qcom: ipa: main code

diff --git a/drivers/net/ipa/ipa.h b/drivers/net/ipa/ipa.h
new file mode 100644
index 000000000000..c580254d1e0e
--- /dev/null
+++ b/drivers/net/ipa/ipa.h
@@ -0,0 +1,131 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2018-2019 Linaro Ltd.
+ */
+#ifndef _IPA_H_
+#define _IPA_H_
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/pm_wakeup.h>
+
+#include "gsi.h"
+#include "ipa_qmi.h"
+#include "ipa_endpoint.h"
+#include "ipa_interrupt.h"
+
+struct clk;
+struct icc_path;
+struct net_device;
+struct platform_device;
+
+struct ipa_clock;
+struct ipa_smp2p;
+struct ipa_interrupt;
+
+/**
+ * struct ipa - IPA information
+ * @gsi:		Embedded GSI structure
+ * @pdev:		Platform device
+ * @smp2p:		SMP2P information
+ * @clock:		IPA clocking information
+ * @suspend_ref:	Whether clock reference preventing suspend taken
+ * @route_virt:		Virtual address of routing table
+ * @route_addr:		DMA address for routing table
+ * @filter_virt:	Virtual address of filter table
+ * @filter_addr:	DMA address for filter table
+ * @interrupt:		IPA Interrupt information
+ * @uc_loaded:		Non-zero when microcontroller has reported it's ready
+ * @ipa_phys:		Physical address of IPA memory space
+ * @ipa_virt:		Virtual address for IPA memory space
+ * @reg_virt:		Virtual address used for IPA register access
+ * @shared_phys:	Physical address of memory space shared with modem
+ * @shared_virt:	Virtual address of memory space shared with modem
+ * @shared_offset:	Additional offset used for shared memory
+ * @wakeup:		Wakeup source information
+ * @filter_support:	Bit mask indicating endpoints that support filtering
+ * @initialized:	Bit mask indicating endpoints initialized
+ * @set_up:		Bit mask indicating endpoints set up
+ * @enabled:		Bit mask indicating endpoints enabled
+ * @suspended:		Bit mask indicating endpoints suspended
+ * @endpoint:		Array of endpoint information
+ * @endpoint_map:	Mapping of GSI channel to IPA endpoint information
+ * @command_endpoint:	Endpoint used for command TX
+ * @default_endpoint:	Endpoint used for default route RX
+ * @modem_netdev:	Network device structure used for modem
+ * @setup_complete:	Flag indicating whether setup stage has completed
+ * @qmi:		QMI information
+ */
+struct ipa {
+	struct gsi gsi;
+	struct platform_device *pdev;
+	struct ipa_smp2p *smp2p;
+	struct ipa_clock *clock;
+	atomic_t suspend_ref;
+
+	void *route_virt;
+	dma_addr_t route_addr;
+	void *filter_virt;
+	dma_addr_t filter_addr;
+
+	struct ipa_interrupt *interrupt;
+	u32 uc_loaded;
+
+	phys_addr_t reg_phys;
+	void __iomem *reg_virt;
+	phys_addr_t shared_phys;
+	void *shared_virt;
+	u32 shared_offset;
+
+	struct wakeup_source wakeup;
+
+	/* Bit masks indicating endpoint state */
+	u32 filter_support;
+	u32 initialized;
+	u32 set_up;
+	u32 enabled;
+	u32 suspended;
+
+	struct ipa_endpoint endpoint[IPA_ENDPOINT_MAX];
+	struct ipa_endpoint *endpoint_map[GSI_CHANNEL_MAX];
+	struct ipa_endpoint *command_endpoint;	/* TX */
+	struct ipa_endpoint *default_endpoint;	/* Default route RX */
+
+	struct net_device *modem_netdev;
+	u32 setup_complete;
+
+	struct ipa_qmi qmi;
+};
+
+/**
+ * ipa_setup() - Perform IPA setup
+ * @ipa:		IPA pointer
+ *
+ * IPA initialization is broken into stages:  init; config; setup; and
+ * sometimes enable.  (These have inverses exit, deconfig, teardown, and
+ * disable.)  Activities performed at the init stage can be done without
+ * requiring any access to hardware.  For IPA, activities performed at the
+ * config stage require the IPA clock to be running, because they involve
+ * access to IPA registers.  The setup stage is performed only after the
+ * GSI hardware is ready (more on this below).  And finally IPA endpoints
+ * can be enabled once they're successfully set up.
+ *
+ * This function, @ipa_setup(), starts the setup stage.
+ *
+ * In order for the GSI hardware to be functional it needs firmware to be
+ * loaded (in addition to some other low-level initialization).  This early
+ * GSI initialization can be done either by Trust Zone or by the modem.  If
+ * it's done by Trust Zone, the AP loads the GSI firmware and supplies it to
+ * Trust Zone to verify and install.  The AP knows when this completes, and
+ * whether it was successful.  In this case the AP proceeds to setup once it
+ * knows GSI is ready.
+ *
+ * If the modem performs early GSI initialization, the AP needs to know when
+ * this has occurred.  An SMP2P interrupt is used for this purpose, and
+ * receipt of that interrupt triggers the call to ipa_setup().
+ */
+int ipa_setup(struct ipa *ipa);
+
+#endif /* _IPA_H_ */
diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c
new file mode 100644
index 000000000000..4dc5ead7bab0
--- /dev/null
+++ b/drivers/net/ipa/ipa_main.c
@@ -0,0 +1,920 @@ 
+// SPDX-License-Identifier: GPL-2.0
+
+/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2018-2019 Linaro Ltd.
+ */
+
+#include <linux/types.h>
+#include <linux/atomic.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/remoteproc.h>
+#include <linux/qcom_scm.h>
+#include <linux/soc/qcom/mdt_loader.h>
+
+#include "ipa.h"
+#include "ipa_clock.h"
+#include "ipa_data.h"
+#include "ipa_endpoint.h"
+#include "ipa_cmd.h"
+#include "ipa_mem.h"
+#include "ipa_netdev.h"
+#include "ipa_smp2p.h"
+#include "ipa_uc.h"
+#include "ipa_interrupt.h"
+
+/**
+ * DOC: The IP Accelerator
+ *
+ * This driver supports the Qualcomm IP Accelerator (IPA), which is a
+ * networking component found in many Qualcomm SoCs.  The IPA is connected
+ * to the application processor (AP), but is also connected (and partially
+ * controlled by) other "execution environments" (EEs), such as a modem.
+ *
+ * The IPA is the conduit between the AP and the modem that carries network
+ * traffic.  This driver presents a network interface representing the
+ * connection of the modem to external (e.g. LTE) networks.  The IPA can
+ * provide protocol checksum calculation, offloading this work from the AP.
+ * The IPA is able to provide additional functionality, including routing,
+ * filtering, and NAT support, but that more advanced functionality is not
+ * currently supported.
+ *
+ * Certain resources--including routing tables and filter tables--are still
+ * defined in this driver, because they must be initialized even when the
+ * advanced hardware features are not used.
+ *
+ * There are two distinct layers that implement the IPA hardware, and this
+ * is reflected in the organization of the driver.  The generic software
+ * interface (GSI) is an integral component of the IPA, providing a
+ * well-defined communication layer between the AP subsystem and the IPA
+ * core.  The GSI implements a set of "channels" used for communication
+ * between the AP and the IPA.
+ *
+ * The IPA layer uses GSI channels to implement its "endpoints".  And while
+ * a GSI channel carries data between the AP and the IPA, a pair of IPA
+ * endpoints is used to carry traffic between two EEs.  Specifically, the main
+ * modem network interface is implemented by two pairs of endpoints:  a TX
+ * endpoint on the AP coupled with an RX endpoint on the modem; and another
+ * RX endpoint on the AP receiving data from a TX endpoint on the modem.
+ */
+
+#define IPA_TABLE_ALIGN		128		/* Minimum table alignment */
+#define IPA_TABLE_ENTRY_SIZE	sizeof(u64)	/* Holds a physical address */
+#define IPA_FILTER_SIZE		8		/* Filter descriptor size */
+#define IPA_ROUTE_SIZE		8		/* Route descriptor size */
+
+/* Backward compatibility register value to use for SDM845 */
+#define IPA_BCR_REG_VAL		0x0000003b
+
+/* The name of the main firmware file relative to /lib/firmware */
+#define IPA_FWS_PATH		"ipa_fws.mdt"
+#define IPA_PAS_ID		15
+/**
+ * ipa_filter_tuple_zero() - Zero an endpoints filter tuple
+ * @endpoint_id:	Endpoint whose filter tuple should be zeroed
+ *
+ * Endpoint must be for AP (not modem) and support filtering. Updates the
+ * filter masks values without changing routing ones.
+ */
+static void ipa_filter_tuple_zero(struct ipa_endpoint *endpoint)
+{
+	enum ipa_endpoint_id endpoint_id = endpoint->endpoint_id;
+	u32 offset;
+	u32 val;
+
+	offset = IPA_REG_ENDP_FILTER_ROUTER_HSH_CFG_N_OFFSET(endpoint_id);
+
+	val = ioread32(endpoint->ipa->reg_virt + offset);
+
+	/* Zero all filter-related fields, preserving the rest */
+	u32_replace_bits(val, 0, IPA_REG_ENDP_FILTER_HASH_MSK_ALL);
+
+	iowrite32(val, endpoint->ipa->reg_virt + offset);
+}
+
+static void ipa_filter_hash_tuple_config(struct ipa *ipa)
+{
+	u32 ep_mask = ipa->filter_support;
+
+	while (ep_mask) {
+		enum ipa_endpoint_id endpoint_id = __ffs(ep_mask);
+		struct ipa_endpoint *endpoint;
+
+		ep_mask ^= BIT(endpoint_id);
+
+		endpoint = &ipa->endpoint[endpoint_id];
+		if (endpoint->ee_id != GSI_EE_MODEM)
+			ipa_filter_tuple_zero(endpoint);
+	}
+}
+
+/**
+ * ipa_route_tuple_zero() - Zero a routing table entry tuple
+ * @route_id:	Identifier for routing table entry to be zeroed
+ *
+ * Updates the routing table values without changing filtering ones.
+ */
+static void ipa_route_tuple_zero(struct ipa *ipa, u32 route_id)
+{
+	u32 offset = IPA_REG_ENDP_FILTER_ROUTER_HSH_CFG_N_OFFSET(route_id);
+	u32 val;
+
+	val = ioread32(ipa->reg_virt + offset);
+
+	/* Zero all route-related fields, preserving the rest */
+	u32_replace_bits(val, 0, IPA_REG_ENDP_ROUTER_HASH_MSK_ALL);
+
+	iowrite32(val, ipa->reg_virt + offset);
+}
+
+static void ipa_route_hash_tuple_config(struct ipa *ipa)
+{
+	u32 route_mask;
+	u32 modem_mask;
+
+	BUILD_BUG_ON(!IPA_SMEM_MODEM_RT_COUNT);
+	BUILD_BUG_ON(IPA_SMEM_RT_COUNT < IPA_SMEM_MODEM_RT_COUNT);
+	BUILD_BUG_ON(IPA_SMEM_RT_COUNT >= BITS_PER_LONG);
+
+	/* Compute a mask representing non-modem routing table entries */
+	route_mask = GENMASK(IPA_SMEM_RT_COUNT - 1, 0);
+	modem_mask = GENMASK(IPA_SMEM_MODEM_RT_INDEX_MAX,
+			     IPA_SMEM_MODEM_RT_INDEX_MIN);
+	route_mask &= ~modem_mask;
+
+	while (route_mask) {
+		u32 route_id = __ffs(route_mask);
+
+		route_mask ^= BIT(route_id);
+
+		ipa_route_tuple_zero(ipa, route_id);
+	}
+}
+
+/**
+ * ipa_route_setup() - Initialize an empty routing table
+ * @ipa:	IPA pointer
+ *
+ * Each entry in the routing table contains the DMA address of a route
+ * descriptor.  A special zero descriptor is allocated that represents "no
+ * route" and this function initializes all its entries to point at that
+ * zero route.  The zero route is allocated with the table, immediately past
+ * its end.
+ *
+ * Return:	0 if successful or -ENOMEM
+ */
+static int ipa_route_setup(struct ipa *ipa)
+{
+	struct device *dev = &ipa->pdev->dev;
+	u64 zero_route_addr;
+	dma_addr_t addr;
+	u32 route_id;
+	size_t size;
+	u64 *virt;
+
+	BUILD_BUG_ON(!IPA_ROUTE_SIZE);
+	BUILD_BUG_ON(sizeof(*virt) != IPA_TABLE_ENTRY_SIZE);
+
+	/* Allocate the routing table, with enough space at the end of the
+	 * table to hold the zero route descriptor.  Initialize all filter
+	 * table entries to point to the zero route.
+	 */
+	size = IPA_SMEM_RT_COUNT * IPA_TABLE_ENTRY_SIZE;
+	virt = dma_alloc_coherent(dev, size + IPA_ROUTE_SIZE, &addr,
+				   GFP_KERNEL);
+	if (!virt)
+		return -ENOMEM;
+	ipa->route_virt = virt;
+	ipa->route_addr = addr;
+
+	/* Zero route is immediately after the route table */
+	zero_route_addr = addr + size;
+
+	for (route_id = 0; route_id < IPA_SMEM_RT_COUNT; route_id++)
+		*virt++ = zero_route_addr;
+
+	ipa_cmd_route_config_ipv4(ipa, size);
+	ipa_cmd_route_config_ipv6(ipa, size);
+
+	ipa_route_hash_tuple_config(ipa);
+
+	/* Configure default route for exception packets */
+	ipa_endpoint_default_route_setup(ipa->default_endpoint);
+
+	return 0;
+}
+
+/**
+ * ipa_route_teardown() - Inverse of ipa_route_setup().
+ * @ipa:	IPA pointer
+ */
+static void ipa_route_teardown(struct ipa *ipa)
+{
+	struct device *dev = &ipa->pdev->dev;
+	size_t size;
+
+	ipa_endpoint_default_route_teardown(ipa->default_endpoint);
+
+	size = IPA_SMEM_RT_COUNT * IPA_TABLE_ENTRY_SIZE;
+	size += IPA_ROUTE_SIZE;
+
+	dma_free_coherent(dev, size, ipa->route_virt, ipa->route_addr);
+	ipa->route_virt = NULL;
+	ipa->route_addr = 0;
+}
+
+/**
+ * ipa_filter_setup() - Initialize an empty filter table
+ * @ipa:	IPA pointer
+ *
+ * The filter table consists of a bitmask representing which endpoints support
+ * filtering, followed by one table entry for each set bit in the mask.  Each
+ * entry in the filter table contains the DMA address of a filter descriptor.
+ * A special zero descriptor is allocated that represents "no filter" and this
+ * function initializes all its entries to point at that zero filter.  The
+ * zero filter is allocated with the table, immediately past its end.
+ *
+ * Return:	0 if successful or a negative error code
+ */
+static int ipa_filter_setup(struct ipa *ipa)
+{
+	struct device *dev = &ipa->pdev->dev;
+	u64 zero_filter_addr;
+	u32 filter_count;
+	dma_addr_t addr;
+	size_t size;
+	u64 *virt;
+	u32 i;
+
+	BUILD_BUG_ON(!IPA_FILTER_SIZE);
+
+	/* Allocate the filter table, with an extra slot for the bitmap.  Also
+	 * allocate enough space at the end of the table to hold the zero
+	 * filter descriptor.  Initialize all filter table entries point to
+	 * that.
+	 */
+	filter_count = hweight32(ipa->filter_support);
+	size = (filter_count + 1) * IPA_TABLE_ENTRY_SIZE;
+	virt = dma_alloc_coherent(dev, size + IPA_FILTER_SIZE, &addr,
+				   GFP_KERNEL);
+	if (!virt)
+		goto err_clear_filter_support;
+	ipa->filter_virt = virt;
+	ipa->filter_addr = addr;
+
+	/* Zero filter is immediately after the filter table */
+	zero_filter_addr = addr + size;
+
+	/* Save the filter table bitmap.  The "soft" bitmap value must be
+	 * converted to the hardware representation by shifting it left one
+	 * position.  (Bit 0 represents global filtering, which is possible
+	 * but not used.)
+	 */
+	*virt++ = ipa->filter_support << 1;
+
+	/* Now point every entry in the table at the empty filter */
+	for (i = 0; i < filter_count; i++)
+		*virt++ = zero_filter_addr;
+
+	ipa_cmd_filter_config_ipv4(ipa, size);
+	ipa_cmd_filter_config_ipv6(ipa, size);
+
+	ipa_filter_hash_tuple_config(ipa);
+
+	return 0;
+
+err_clear_filter_support:
+	ipa->filter_support = 0;
+
+	return -ENOMEM;
+}
+
+/**
+ * ipa_filter_teardown() - Inverse of ipa_filter_setup().
+ * @ipa:	IPA pointer
+ */
+static void ipa_filter_teardown(struct ipa *ipa)
+{
+	u32 filter_count = hweight32(ipa->filter_support);
+	struct device *dev = &ipa->pdev->dev;
+	size_t size;
+
+	size = (filter_count + 1) * IPA_TABLE_ENTRY_SIZE;
+	size += IPA_FILTER_SIZE;
+
+	dma_free_coherent(dev, size, ipa->filter_virt, ipa->filter_addr);
+	ipa->filter_virt = NULL;
+	ipa->filter_addr = 0;
+	ipa->filter_support = 0;
+}
+
+/**
+ * ipa_suspend_handler() - Handle the suspend interrupt
+ * @ipa:	IPA pointer
+ * @interrupt:	Interrupt type.
+ *
+ * When in suspended state, the IPA can trigger a resume by sending a SUSPEND
+ * IPA interrupt.
+ */
+static void ipa_suspend_handler(struct ipa *ipa,
+				enum ipa_interrupt_id interrupt_id)
+{
+	/* Take a a single clock reference to prevent suspend.  All
+	 * endpoints will be resumed as a result.  This reference will
+	 * be dropped when we get a power management suspend request.
+	 */
+	if (!atomic_xchg(&ipa->suspend_ref, 1))
+		ipa_clock_get(ipa->clock);
+
+	/* Acknowledge/clear the suspend interrupt on all endpoints */
+	ipa_interrupt_suspend_clear_all(ipa->interrupt);
+}
+
+/* Remoteproc callbacks for SSR events: prepare, start, stop, unprepare */
+int ipa_ssr_prepare(struct rproc_subdev *subdev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipa_ssr_prepare);
+
+int ipa_ssr_start(struct rproc_subdev *subdev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipa_ssr_start);
+
+void ipa_ssr_stop(struct rproc_subdev *subdev, bool crashed)
+{
+}
+EXPORT_SYMBOL_GPL(ipa_ssr_stop);
+
+void ipa_ssr_unprepare(struct rproc_subdev *subdev)
+{
+}
+EXPORT_SYMBOL_GPL(ipa_ssr_unprepare);
+
+/**
+ * ipa_setup() - Set up IPA hardware
+ * @ipa:	IPA pointer
+ *
+ * Perform initialization that requires issuing immediate commands using the
+ * command TX endpoint.  This cannot be run until early initialization
+ * (including loading GSI firmware) is complete.
+ */
+int ipa_setup(struct ipa *ipa)
+{
+	struct ipa_endpoint *rx_endpoint;
+	struct ipa_endpoint *tx_endpoint;
+	int ret;
+
+	dev_dbg(&ipa->pdev->dev, "%s() started\n", __func__);
+
+	ret = gsi_setup(&ipa->gsi);
+	if (ret)
+		return ret;
+
+	ipa->interrupt = ipa_interrupt_setup(ipa);
+	if (IS_ERR(ipa->interrupt)) {
+		ret = PTR_ERR(ipa->interrupt);
+		goto err_gsi_teardown;
+	}
+	ipa_interrupt_add(ipa->interrupt, IPA_INTERRUPT_TX_SUSPEND,
+			  ipa_suspend_handler);
+
+	ipa_uc_setup(ipa);
+
+	ipa_endpoint_setup(ipa);
+
+	/* We need to use the AP command out endpoint to perform other
+	 * initialization, so we set that up first.
+	 */
+	ret = ipa_endpoint_enable_one(ipa->command_endpoint);
+	if (ret)
+		goto err_endpoint_teardown;
+
+	ret = ipa_smem_setup(ipa);
+	if (ret)
+		goto err_command_disable;
+
+	ret = ipa_route_setup(ipa);
+	if (ret)
+		goto err_smem_teardown;
+
+	ret = ipa_filter_setup(ipa);
+	if (ret)
+		goto err_route_teardown;
+
+	ret = ipa_endpoint_enable_one(ipa->default_endpoint);
+	if (ret)
+		goto err_filter_teardown;
+
+	rx_endpoint = &ipa->endpoint[IPA_ENDPOINT_AP_MODEM_RX];
+	tx_endpoint = &ipa->endpoint[IPA_ENDPOINT_AP_MODEM_TX];
+	ipa->modem_netdev = ipa_netdev_setup(ipa, rx_endpoint, tx_endpoint);
+	if (IS_ERR(ipa->modem_netdev)) {
+		ret = PTR_ERR(ipa->modem_netdev);
+		goto err_default_disable;
+	}
+
+	ipa->setup_complete = 1;
+
+	dev_info(&ipa->pdev->dev, "IPA driver setup completed successfully\n");
+
+	return 0;
+
+err_default_disable:
+	ipa_endpoint_disable_one(ipa->default_endpoint);
+err_filter_teardown:
+	ipa_filter_teardown(ipa);
+err_route_teardown:
+	ipa_route_teardown(ipa);
+err_smem_teardown:
+	ipa_smem_teardown(ipa);
+err_command_disable:
+	ipa_endpoint_disable_one(ipa->command_endpoint);
+err_endpoint_teardown:
+	ipa_endpoint_teardown(ipa);
+	ipa_uc_teardown(ipa);
+	ipa_interrupt_remove(ipa->interrupt, IPA_INTERRUPT_TX_SUSPEND);
+	ipa_interrupt_teardown(ipa->interrupt);
+err_gsi_teardown:
+	gsi_teardown(&ipa->gsi);
+
+	return ret;
+}
+
+/**
+ * ipa_teardown() - Inverse of ipa_setup()
+ * @ipa:	IPA pointer
+ */
+static void ipa_teardown(struct ipa *ipa)
+{
+	ipa_netdev_teardown(ipa->modem_netdev);
+	ipa_endpoint_disable_one(ipa->default_endpoint);
+	ipa_filter_teardown(ipa);
+	ipa_route_teardown(ipa);
+	ipa_smem_teardown(ipa);
+	ipa_endpoint_disable_one(ipa->command_endpoint);
+	ipa_endpoint_teardown(ipa);
+	ipa_uc_teardown(ipa);
+	ipa_interrupt_remove(ipa->interrupt, IPA_INTERRUPT_TX_SUSPEND);
+	ipa_interrupt_teardown(ipa->interrupt);
+	gsi_teardown(&ipa->gsi);
+}
+
+/**
+ * ipa_hardware_config() - Primitive hardware initialization
+ * @ipa:	IPA pointer
+ */
+static void ipa_hardware_config(struct ipa *ipa)
+{
+	u32 val;
+
+	/* SDM845 has IPA version 3.5.1 */
+	val = IPA_BCR_REG_VAL;
+	iowrite32(val, ipa->reg_virt + IPA_REG_BCR_OFFSET);
+
+	val = u32_encode_bits(8, GEN_QMB_0_MAX_WRITES_FMASK);
+	val |= u32_encode_bits(4, GEN_QMB_1_MAX_WRITES_FMASK);
+	iowrite32(val, ipa->reg_virt + IPA_REG_QSB_MAX_WRITES_OFFSET);
+
+	val = u32_encode_bits(8, GEN_QMB_0_MAX_READS_FMASK);
+	val |= u32_encode_bits(12, GEN_QMB_1_MAX_READS_FMASK);
+	iowrite32(val, ipa->reg_virt + IPA_REG_QSB_MAX_READS_OFFSET);
+}
+
+/**
+ * ipa_hardware_deconfig() - Inverse of ipa_hardware_config()
+ * @ipa:	IPA pointer
+ *
+ * This restores the power-on reset values (even if they aren't different)
+ */
+static void ipa_hardware_deconfig(struct ipa *ipa)
+{
+	/* Values we program above are the same as the power-on reset values */
+}
+
+static void ipa_resource_config_src_one(struct ipa *ipa,
+					const struct ipa_resource_src *resource)
+{
+	u32 offset = IPA_REG_SRC_RSRC_GRP_01_RSRC_TYPE_N_OFFSET;
+	u32 stride = IPA_REG_SRC_RSRC_GRP_01_RSRC_TYPE_N_STRIDE;
+	enum ipa_resource_type_src n = resource->type;
+	const struct ipa_resource_limits *xlimits;
+	const struct ipa_resource_limits *ylimits;
+	u32 val;
+
+	xlimits = &resource->limits[IPA_RESOURCE_GROUP_LWA_DL];
+	ylimits = &resource->limits[IPA_RESOURCE_GROUP_UL_DL];
+
+	val = u32_encode_bits(xlimits->min, X_MIN_LIM_FMASK);
+	val |= u32_encode_bits(xlimits->max, X_MAX_LIM_FMASK);
+	val |= u32_encode_bits(ylimits->min, Y_MIN_LIM_FMASK);
+	val |= u32_encode_bits(ylimits->max, Y_MAX_LIM_FMASK);
+
+	iowrite32(val, ipa->reg_virt + offset + n * stride);
+}
+
+static void ipa_resource_config_dst_one(struct ipa *ipa,
+					const struct ipa_resource_dst *resource)
+{
+	u32 offset = IPA_REG_DST_RSRC_GRP_01_RSRC_TYPE_N_OFFSET;
+	u32 stride = IPA_REG_DST_RSRC_GRP_01_RSRC_TYPE_N_STRIDE;
+	enum ipa_resource_type_dst n = resource->type;
+	const struct ipa_resource_limits *xlimits;
+	const struct ipa_resource_limits *ylimits;
+	u32 val;
+
+	xlimits = &resource->limits[IPA_RESOURCE_GROUP_LWA_DL];
+	ylimits = &resource->limits[IPA_RESOURCE_GROUP_UL_DL];
+
+	val = u32_encode_bits(xlimits->min, X_MIN_LIM_FMASK);
+	val |= u32_encode_bits(xlimits->max, X_MAX_LIM_FMASK);
+	val |= u32_encode_bits(ylimits->min, Y_MIN_LIM_FMASK);
+	val |= u32_encode_bits(ylimits->max, Y_MAX_LIM_FMASK);
+
+	iowrite32(val, ipa->reg_virt + offset + n * stride);
+}
+
+static void
+ipa_resource_config(struct ipa *ipa, const struct ipa_resource_data *data)
+{
+	const struct ipa_resource_src *resource_src;
+	const struct ipa_resource_dst *resource_dst;
+	u32 i;
+
+	resource_src = data->resource_src;
+	resource_dst = data->resource_dst;
+
+	for (i = 0; i < data->resource_src_count; i++)
+		ipa_resource_config_src_one(ipa, &resource_src[i]);
+
+	for (i = 0; i < data->resource_dst_count; i++)
+		ipa_resource_config_dst_one(ipa, &resource_dst[i]);
+}
+
+static void ipa_resource_deconfig(struct ipa *ipa)
+{
+	/* Nothing to do */
+}
+
+static void ipa_idle_indication_cfg(struct ipa *ipa,
+				    u32 enter_idle_debounce_thresh,
+				    bool const_non_idle_enable)
+{
+	u32 val;
+
+	val = u32_encode_bits(enter_idle_debounce_thresh,
+			      ENTER_IDLE_DEBOUNCE_THRESH_FMASK);
+	if (const_non_idle_enable)
+		val |= CONST_NON_IDLE_ENABLE_FMASK;
+
+	iowrite32(val, ipa->reg_virt + IPA_REG_IDLE_INDICATION_CFG_OFFSET);
+}
+
+/**
+ * ipa_dcd_config() - Enable dynamic clock division on IPA
+ *
+ * Configures when the IPA signals it is idle to the global clock
+ * controller, which can respond by scalling down the clock to
+ * save power.
+ */
+static void ipa_dcd_config(struct ipa *ipa)
+{
+	/* Recommended values for IPA 3.5 according to IPA HPG */
+	ipa_idle_indication_cfg(ipa, 256, false);
+}
+
+static void ipa_dcd_deconfig(struct ipa *ipa)
+{
+	/* Power-on reset values */
+	ipa_idle_indication_cfg(ipa, 0, true);
+}
+
+/**
+ * ipa_config() - Configure IPA hardware
+ * @ipa:	IPA pointer
+ *
+ * Perform initialization requiring IPA clock to be enabled.
+ */
+static int ipa_config(struct ipa *ipa, const struct ipa_data *data)
+{
+	u32 val;
+	int ret;
+
+	/* Get a clock reference to allow initialization.  This reference
+	 * is held after initialization completes, and won't get dropped
+	 * unless/until a system suspend request arrives.
+	 */
+	atomic_set(&ipa->suspend_ref, 1);
+	ipa_clock_get(ipa->clock);
+
+	ipa_hardware_config(ipa);
+
+	/* Ensure we support the number of endpoints supplied by hardware */
+	val = ioread32(ipa->reg_virt + IPA_REG_ENABLED_PIPES_OFFSET);
+	if (val > IPA_ENDPOINT_MAX) {
+		ret = -EINVAL;
+		goto err_hardware_deconfig;
+	}
+
+	ret = ipa_smem_config(ipa);
+	if (ret)
+		goto err_hardware_deconfig;
+
+	/* Assign resource limitation to each group */
+	ipa_resource_config(ipa, data->resource_data);
+
+	/* Note enabling dynamic clock division must not be
+	 * attempted for IPA hardware versions prior to 3.5.
+	 */
+	ipa_dcd_config(ipa);
+
+	return 0;
+
+err_hardware_deconfig:
+	ipa_hardware_deconfig(ipa);
+	ipa_clock_put(ipa->clock);
+
+	return ret;
+}
+
+/**
+ * ipa_deconfig() - Inverse of ipa_config()
+ * @ipa:	IPA pointer
+ */
+static void ipa_deconfig(struct ipa *ipa)
+{
+	ipa_dcd_deconfig(ipa);
+	ipa_resource_deconfig(ipa);
+	ipa_smem_deconfig(ipa);
+	ipa_hardware_deconfig(ipa);
+
+	ipa_clock_put(ipa->clock);
+}
+
+static int ipa_firmware_load(struct device *dev)
+{
+	const struct firmware *fw;
+	struct device_node *node;
+	struct resource res;
+	phys_addr_t phys;
+	ssize_t size;
+	void *virt;
+	int ret;
+
+	node = of_parse_phandle(dev->of_node, "memory-region", 0);
+	if (!node) {
+		dev_err(dev, "memory-region not specified\n");
+		return -EINVAL;
+	}
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return ret;
+
+	ret = request_firmware(&fw, IPA_FWS_PATH, dev);
+	if (ret)
+		return ret;
+
+	phys = res.start;
+	size = (size_t)resource_size(&res);
+	virt = memremap(phys, size, MEMREMAP_WC);
+	if (!virt) {
+		ret = -ENOMEM;
+		goto out_release_firmware;
+	}
+
+	ret = qcom_mdt_load(dev, fw, IPA_FWS_PATH, IPA_PAS_ID,
+			    virt, phys, size, NULL);
+	if (!ret)
+		ret = qcom_scm_pas_auth_and_reset(IPA_PAS_ID);
+
+	memunmap(virt);
+out_release_firmware:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static const struct of_device_id ipa_match[] = {
+	{
+		.compatible	= "qcom,sdm845-ipa",
+		.data		= &ipa_data_sdm845,
+	},
+	{ },
+};
+
+/**
+ * ipa_probe() - IPA platform driver probe function
+ * @pdev:	Platform device pointer
+ *
+ * @Return:	0 if successful, or a negative error code (possibly
+ *		EPROBE_DEFER)
+ *
+ * This is the main entry point for the IPA driver.  When successful, it
+ * initializes the IPA hardware for use.
+ *
+ * Initialization proceeds in several stages.  The "init" stage involves
+ * activities that can be initialized without access to the IPA hardware.
+ * The "setup" stage requires the IPA clock to be active so IPA registers
+ * can beaccessed, but does not require access to the GSI layer.  The
+ * "setup" stage requires access to GSI, and includes initialization that's
+ * performed by issuing IPA immediate commands.
+ */
+static int ipa_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct ipa_data *data;
+	struct ipa *ipa;
+	bool modem_init;
+	int ret;
+
+	/* We assume we're working on 64-bit hardware */
+	BUILD_BUG_ON(!IS_ENABLED(CONFIG_64BIT));
+	BUILD_BUG_ON(ARCH_DMA_MINALIGN % IPA_TABLE_ALIGN);
+
+	data = of_device_get_match_data(dev);
+
+	modem_init = of_property_read_bool(dev->of_node, "modem-init");
+
+	/* If we need Trust Zone, make sure it's ready */
+	if (!modem_init)
+		if (!qcom_scm_is_available())
+			return -EPROBE_DEFER;
+
+	ipa = kzalloc(sizeof(*ipa), GFP_KERNEL);
+	if (!ipa)
+		return -ENOMEM;
+	ipa->pdev = pdev;
+	dev_set_drvdata(dev, ipa);
+
+	/* Initialize the clock and interconnects early.  They might
+	 * not be ready when we're probed, so might return -EPROBE_DEFER.
+	 */
+	atomic_set(&ipa->suspend_ref, 0);
+
+	ipa->clock = ipa_clock_init(ipa);
+	if (IS_ERR(ipa->clock)) {
+		ret = PTR_ERR(ipa->clock);
+		goto err_free_ipa;
+	}
+
+	ret = ipa_mem_init(ipa);
+	if (ret)
+		goto err_clock_exit;
+
+	ret = gsi_init(&ipa->gsi, pdev, data->endpoint_data_count,
+		       data->endpoint_data);
+	if (ret)
+		goto err_mem_exit;
+
+	ipa->smp2p = ipa_smp2p_init(ipa, modem_init);
+	if (IS_ERR(ipa->smp2p)) {
+		ret = PTR_ERR(ipa->smp2p);
+		goto err_gsi_exit;
+	}
+
+	ret = ipa_endpoint_init(ipa, data->endpoint_data_count,
+				data->endpoint_data);
+	if (ret)
+		goto err_smp2p_exit;
+	ipa->command_endpoint = &ipa->endpoint[IPA_ENDPOINT_AP_COMMAND_TX];
+	ipa->default_endpoint = &ipa->endpoint[IPA_ENDPOINT_AP_LAN_RX];
+
+	/* Create a wakeup source. */
+	wakeup_source_init(&ipa->wakeup, "ipa");
+
+	/* Proceed to real initialization */
+	ret = ipa_config(ipa, data);
+	if (ret)
+		goto err_endpoint_exit;
+
+	dev_info(dev, "IPA driver initialized");
+
+	/* If the modem is verifying and loading firmware, we're
+	 * done.  We will receive an SMP2P interrupt when it is OK
+	 * to proceed with the setup phase (involving issuing
+	 * immediate commands after GSI is initialized).
+	 */
+	if (modem_init)
+		return 0;
+
+	/* Otherwise we need to load the firmware and have Trust
+	 * Zone validate and install it.  If that succeeds we can
+	 * proceed with setup.
+	 */
+	ret = ipa_firmware_load(dev);
+	if (ret)
+		goto err_deconfig;
+
+	ret = ipa_setup(ipa);
+	if (ret)
+		goto err_deconfig;
+
+	return 0;
+
+err_deconfig:
+	ipa_deconfig(ipa);
+err_endpoint_exit:
+	wakeup_source_remove(&ipa->wakeup);
+	ipa_endpoint_exit(ipa);
+err_smp2p_exit:
+	ipa_smp2p_exit(ipa->smp2p);
+err_gsi_exit:
+	gsi_exit(&ipa->gsi);
+err_mem_exit:
+	ipa_mem_exit(ipa);
+err_clock_exit:
+	ipa_clock_exit(ipa->clock);
+err_free_ipa:
+	kfree(ipa);
+
+	return ret;
+}
+
+static int ipa_remove(struct platform_device *pdev)
+{
+	struct ipa *ipa = dev_get_drvdata(&pdev->dev);
+
+	ipa_smp2p_disable(ipa->smp2p);
+	if (ipa->setup_complete)
+		ipa_teardown(ipa);
+
+	ipa_deconfig(ipa);
+	wakeup_source_remove(&ipa->wakeup);
+	ipa_endpoint_exit(ipa);
+	ipa_smp2p_exit(ipa->smp2p);
+	ipa_mem_exit(ipa);
+	ipa_clock_exit(ipa->clock);
+	kfree(ipa);
+
+	return 0;
+}
+
+/**
+ * ipa_suspend() - Power management system suspend callback
+ * @dev:	IPA device structure
+ *
+ * Return:	Zero
+ *
+ * Called by the PM framework when a system suspend operation is invoked.
+ */
+int ipa_suspend(struct device *dev)
+{
+	struct ipa *ipa = dev_get_drvdata(dev);
+
+	ipa_clock_put(ipa->clock);
+	atomic_set(&ipa->suspend_ref, 0);
+
+	return 0;
+}
+
+/**
+ * ipa_resume() - Power management system resume callback
+ * @dev:	IPA device structure
+ *
+ * Return:	Always returns 0
+ *
+ * Called by the PM framework when a system resume operation is invoked.
+ */
+int ipa_resume(struct device *dev)
+{
+	struct ipa *ipa = dev_get_drvdata(dev);
+
+	/* This clock reference will keep the IPA out of suspend
+	 * until we get a power management suspend request.
+	 */
+	atomic_set(&ipa->suspend_ref, 1);
+	ipa_clock_get(ipa->clock);
+
+	return 0;
+}
+
+static const struct dev_pm_ops ipa_pm_ops = {
+	.suspend_noirq	= ipa_suspend,
+	.resume_noirq	= ipa_resume,
+};
+
+static struct platform_driver ipa_driver = {
+	.probe	= ipa_probe,
+	.remove	= ipa_remove,
+	.driver	= {
+		.name		= "ipa",
+		.owner		= THIS_MODULE,
+		.pm		= &ipa_pm_ops,
+		.of_match_table	= ipa_match,
+	},
+};
+
+module_platform_driver(ipa_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Qualcomm IP Accelerator device driver");
diff --git a/drivers/net/ipa/ipa_reg.h b/drivers/net/ipa/ipa_reg.h
new file mode 100644
index 000000000000..8d04db6f7b00
--- /dev/null
+++ b/drivers/net/ipa/ipa_reg.h
@@ -0,0 +1,279 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2018-2019 Linaro Ltd.
+ */
+#ifndef _IPA_REG_H_
+#define _IPA_REG_H_
+
+#include <linux/bits.h>
+
+/**
+ * DOC: IPA Registers
+ *
+ * IPA registers are located within the "ipa" address space defined by
+ * Device Tree.  The offset of each register within that space is specified
+ * by symbols defined below.  The address space is mapped to virtual memory
+ * space in ipa_mem_init().  All IPA registers are 32 bits wide.
+ *
+ * Certain register types are duplicated for a number of instances of
+ * something.  For example, each IPA endpoint has an set of registers
+ * defining its configuration.  The offset to an endpoint's set of registers
+ * is computed based on an "base" offset plus an additional "stride" offset
+ * that's dependent on the endpoint's ID.  For such registers, the offset
+ * is computed by a function-like macro that takes a parameter used in
+ * the computation.
+ *
+ * The offset of a register dependent on execution environment is computed
+ * by a macro that is supplied a parameter "ee".  The "ee" value is a member
+ * of the gsi_ee enumerated type.
+ *
+ * The offset of a register dependent on endpoint id is computed by a macro
+ * that is supplied a parameter "ep".  The "ep" value must be less than
+ * IPA_ENDPOINT_MAX.
+ *
+ * The offset of registers related to hashed filter and router tables is
+ * computed by a macro that is supplied a parameter "er".  The "er" represents
+ * an endpoint ID for filters, or a route ID for routes.  For filters, the
+ * endpoint ID must be less than IPA_ENDPOINT_MAX, but is further restricted
+ * because not all endpoints support filtering.  For routes, the route ID
+ * must be less than IPA_SMEM_RT_COUNT.
+ *
+ * Some registers encode multiple fields within them.  For these, each field
+ * has a symbol below definining a mask that defines both the position and
+ * width of the field within its register.
+ */
+
+#define IPA_REG_ENABLED_PIPES_OFFSET			0x00000038
+
+#define IPA_REG_ROUTE_OFFSET				0x00000048
+#define ROUTE_DIS_FMASK				GENMASK(0, 0)
+#define ROUTE_DEF_PIPE_FMASK			GENMASK(5, 1)
+#define ROUTE_DEF_HDR_TABLE_FMASK		GENMASK(6, 6)
+#define ROUTE_DEF_HDR_OFST_FMASK		GENMASK(16, 7)
+#define ROUTE_FRAG_DEF_PIPE_FMASK		GENMASK(21, 17)
+#define ROUTE_DEF_RETAIN_HDR_FMASK		GENMASK(24, 24)
+
+#define IPA_REG_SHARED_MEM_SIZE_OFFSET			0x00000054
+#define SHARED_MEM_SIZE_FMASK			GENMASK(15, 0)
+#define SHARED_MEM_BADDR_FMASK			GENMASK(31, 16)
+
+#define IPA_REG_QSB_MAX_WRITES_OFFSET			0x00000074
+#define GEN_QMB_0_MAX_WRITES_FMASK		GENMASK(3, 0)
+#define GEN_QMB_1_MAX_WRITES_FMASK		GENMASK(7, 4)
+
+#define IPA_REG_QSB_MAX_READS_OFFSET			0x00000078
+#define GEN_QMB_0_MAX_READS_FMASK		GENMASK(3, 0)
+#define GEN_QMB_1_MAX_READS_FMASK		GENMASK(7, 4)
+
+#define IPA_REG_STATE_AGGR_ACTIVE_OFFSET		0x0000010c
+
+#define IPA_REG_BCR_OFFSET				0x000001d0
+
+#define IPA_REG_LOCAL_PKT_PROC_CNTXT_BASE_OFFSET	0x000001e8
+
+#define IPA_REG_AGGR_FORCE_CLOSE_OFFSET			0x000001ec
+#define PIPE_BITMAP_FMASK			GENMASK(19, 0)
+
+#define IPA_REG_IDLE_INDICATION_CFG_OFFSET		0x00000220
+#define ENTER_IDLE_DEBOUNCE_THRESH_FMASK	GENMASK(15, 0)
+#define CONST_NON_IDLE_ENABLE_FMASK		GENMASK(16, 16)
+
+#define IPA_REG_SRC_RSRC_GRP_01_RSRC_TYPE_N_OFFSET	0x00000400
+#define IPA_REG_SRC_RSRC_GRP_01_RSRC_TYPE_N_STRIDE	0x0020
+#define IPA_REG_DST_RSRC_GRP_01_RSRC_TYPE_N_OFFSET	0x00000500
+#define IPA_REG_DST_RSRC_GRP_01_RSRC_TYPE_N_STRIDE	0x0020
+#define X_MIN_LIM_FMASK				GENMASK(5, 0)
+#define X_MAX_LIM_FMASK				GENMASK(13, 8)
+#define Y_MIN_LIM_FMASK				GENMASK(21, 16)
+#define Y_MAX_LIM_FMASK				GENMASK(29, 24)
+
+#define IPA_REG_ENDP_INIT_CTRL_N_OFFSET(ep) \
+					(0x00000800 + 0x0070 * (ep))
+#define ENDP_SUSPEND_FMASK			GENMASK(0, 0)
+#define ENDP_DELAY_FMASK			GENMASK(1, 1)
+
+#define IPA_REG_ENDP_INIT_CFG_N_OFFSET(ep) \
+					(0x00000808 + 0x0070 * (ep))
+#define FRAG_OFFLOAD_EN_FMASK			GENMASK(0, 0)
+#define CS_OFFLOAD_EN_FMASK			GENMASK(2, 1)
+#define CS_METADATA_HDR_OFFSET_FMASK		GENMASK(6, 3)
+#define CS_GEN_QMB_MASTER_SEL_FMASK		GENMASK(8, 8)
+
+#define IPA_REG_ENDP_INIT_HDR_N_OFFSET(ep) \
+					(0x00000810 + 0x0070 * (ep))
+#define HDR_LEN_FMASK				GENMASK(5, 0)
+#define HDR_OFST_METADATA_VALID_FMASK		GENMASK(6, 6)
+#define HDR_OFST_METADATA_FMASK			GENMASK(12, 7)
+#define HDR_ADDITIONAL_CONST_LEN_FMASK		GENMASK(18, 13)
+#define HDR_OFST_PKT_SIZE_VALID_FMASK		GENMASK(19, 19)
+#define HDR_OFST_PKT_SIZE_FMASK			GENMASK(25, 20)
+#define HDR_A5_MUX_FMASK			GENMASK(26, 26)
+#define HDR_LEN_INC_DEAGG_HDR_FMASK		GENMASK(27, 27)
+#define HDR_METADATA_REG_VALID_FMASK		GENMASK(28, 28)
+
+#define IPA_REG_ENDP_INIT_HDR_EXT_N_OFFSET(ep) \
+					(0x00000814 + 0x0070 * (ep))
+#define HDR_ENDIANNESS_FMASK			GENMASK(0, 0)
+#define HDR_TOTAL_LEN_OR_PAD_VALID_FMASK	GENMASK(1, 1)
+#define HDR_TOTAL_LEN_OR_PAD_FMASK		GENMASK(2, 2)
+#define HDR_PAYLOAD_LEN_INC_PADDING_FMASK	GENMASK(3, 3)
+#define HDR_TOTAL_LEN_OR_PAD_OFFSET_FMASK	GENMASK(9, 4)
+#define HDR_PAD_TO_ALIGNMENT_FMASK		GENMASK(13, 10)
+
+#define IPA_REG_ENDP_INIT_HDR_METADATA_MASK_N_OFFSET(ep) \
+					(0x00000818 + 0x0070 * (ep))
+
+#define IPA_REG_ENDP_INIT_AGGR_N_OFFSET(ep) \
+					(0x00000824 +  0x0070 * (ep))
+#define AGGR_EN_FMASK				GENMASK(1, 0)
+#define AGGR_TYPE_FMASK				GENMASK(4, 2)
+#define AGGR_BYTE_LIMIT_FMASK			GENMASK(9, 5)
+#define AGGR_TIME_LIMIT_FMASK			GENMASK(14, 10)
+#define AGGR_PKT_LIMIT_FMASK			GENMASK(20, 15)
+#define AGGR_SW_EOF_ACTIVE_FMASK		GENMASK(21, 21)
+#define AGGR_FORCE_CLOSE_FMASK			GENMASK(22, 22)
+#define AGGR_HARD_BYTE_LIMIT_ENABLE_FMASK	GENMASK(24, 24)
+
+#define IPA_REG_ENDP_INIT_MODE_N_OFFSET(ep) \
+					(0x00000820 + 0x0070 * (ep))
+#define MODE_FMASK				GENMASK(2, 0)
+#define DEST_PIPE_INDEX_FMASK			GENMASK(8, 4)
+#define BYTE_THRESHOLD_FMASK			GENMASK(27, 12)
+#define PIPE_REPLICATION_EN_FMASK		GENMASK(28, 28)
+#define PAD_EN_FMASK				GENMASK(29, 29)
+#define HDR_FTCH_DISABLE_FMASK			GENMASK(30, 30)
+
+#define IPA_REG_ENDP_INIT_DEAGGR_N_OFFSET(ep) \
+					(0x00000834 + 0x0070 * (ep))
+#define DEAGGR_HDR_LEN_FMASK			GENMASK(5, 0)
+#define PACKET_OFFSET_VALID_FMASK		GENMASK(7, 7)
+#define PACKET_OFFSET_LOCATION_FMASK		GENMASK(13, 8)
+#define MAX_PACKET_LEN_FMASK			GENMASK(31, 16)
+
+#define IPA_REG_ENDP_INIT_SEQ_N_OFFSET(ep) \
+					(0x0000083c + 0x0070 * (ep))
+#define HPS_SEQ_TYPE_FMASK			GENMASK(3, 0)
+#define DPS_SEQ_TYPE_FMASK			GENMASK(7, 4)
+#define HPS_REP_SEQ_TYPE_FMASK			GENMASK(11, 8)
+#define DPS_REP_SEQ_TYPE_FMASK			GENMASK(15, 12)
+
+#define IPA_REG_ENDP_STATUS_N_OFFSET(ep) \
+					(0x00000840 + 0x0070 * (ep))
+#define STATUS_EN_FMASK				GENMASK(0, 0)
+#define STATUS_ENDP_FMASK			GENMASK(5, 1)
+#define STATUS_LOCATION_FMASK			GENMASK(8, 8)
+#define STATUS_PKT_SUPPRESS_FMASK		GENMASK(9, 9)
+
+/* "er" is either an endpoint id (for filters) or a route id (for routes) */
+#define IPA_REG_ENDP_FILTER_ROUTER_HSH_CFG_N_OFFSET(er) \
+					(0x0000085c + 0x0070 * (er))
+#define FILTER_HASH_MSK_SRC_ID_FMASK		GENMASK(0, 0)
+#define FILTER_HASH_MSK_SRC_IP_FMASK		GENMASK(1, 1)
+#define FILTER_HASH_MSK_DST_IP_FMASK		GENMASK(2, 2)
+#define FILTER_HASH_MSK_SRC_PORT_FMASK		GENMASK(3, 3)
+#define FILTER_HASH_MSK_DST_PORT_FMASK		GENMASK(4, 4)
+#define FILTER_HASH_MSK_PROTOCOL_FMASK		GENMASK(5, 5)
+#define FILTER_HASH_MSK_METADATA_FMASK		GENMASK(6, 6)
+#define FILTER_HASH_UNDEFINED1_FMASK		GENMASK(15, 7)
+#define IPA_REG_ENDP_FILTER_HASH_MSK_ALL	GENMASK(15, 0)
+
+#define ROUTER_HASH_MSK_SRC_ID_FMASK		GENMASK(16, 16)
+#define ROUTER_HASH_MSK_SRC_IP_FMASK		GENMASK(17, 17)
+#define ROUTER_HASH_MSK_DST_IP_FMASK		GENMASK(18, 18)
+#define ROUTER_HASH_MSK_SRC_PORT_FMASK		GENMASK(19, 19)
+#define ROUTER_HASH_MSK_DST_PORT_FMASK		GENMASK(20, 20)
+#define ROUTER_HASH_MSK_PROTOCOL_FMASK		GENMASK(21, 21)
+#define ROUTER_HASH_MSK_METADATA_FMASK		GENMASK(22, 22)
+#define ROUTER_HASH_UNDEFINED2_FMASK		GENMASK(31, 23)
+#define IPA_REG_ENDP_ROUTER_HASH_MSK_ALL	GENMASK(31, 16)
+
+#define IPA_REG_IRQ_STTS_OFFSET	\
+				IPA_REG_IRQ_STTS_EE_N_OFFSET(GSI_EE_AP)
+#define IPA_REG_IRQ_STTS_EE_N_OFFSET(ee) \
+					(0x00003008 + 0x1000 * (ee))
+
+#define IPA_REG_IRQ_EN_OFFSET \
+				IPA_REG_IRQ_EN_EE_N_OFFSET(GSI_EE_AP)
+#define IPA_REG_IRQ_EN_EE_N_OFFSET(ee) \
+					(0x0000300c + 0x1000 * (ee))
+
+#define IPA_REG_IRQ_CLR_OFFSET \
+				IPA_REG_IRQ_CLR_EE_N_OFFSET(GSI_EE_AP)
+#define IPA_REG_IRQ_CLR_EE_N_OFFSET(ee) \
+					(0x00003010 + 0x1000 * (ee))
+
+#define IPA_REG_IRQ_UC_OFFSET \
+				IPA_REG_IRQ_UC_EE_N_OFFSET(GSI_EE_AP)
+#define IPA_REG_IRQ_UC_EE_N_OFFSET(ee) \
+					(0x0000301c + 0x1000 * (ee))
+
+#define IPA_REG_IRQ_SUSPEND_INFO_OFFSET \
+				IPA_REG_IRQ_SUSPEND_INFO_EE_N_OFFSET(GSI_EE_AP)
+#define IPA_REG_IRQ_SUSPEND_INFO_EE_N_OFFSET(ee) \
+					(0x00003030 + 0x1000 * (ee))
+
+#define IPA_REG_SUSPEND_IRQ_EN_OFFSET \
+				IPA_REG_SUSPEND_IRQ_EN_EE_N_OFFSET(GSI_EE_AP)
+#define IPA_REG_SUSPEND_IRQ_EN_EE_N_OFFSET(ee) \
+					(0x00003034 + 0x1000 * (ee))
+
+#define IPA_REG_SUSPEND_IRQ_CLR_OFFSET \
+				IPA_REG_SUSPEND_IRQ_CLR_EE_N_OFFSET(GSI_EE_AP)
+#define IPA_REG_SUSPEND_IRQ_CLR_EE_N_OFFSET(ee) \
+					(0x00003038 + 0x1000 * (ee))
+
+/** enum ipa_cs_offload_en - checksum offload field in ENDP_INIT_CFG_N */
+enum ipa_cs_offload_en {
+	IPA_CS_OFFLOAD_NONE	= 0,
+	IPA_CS_OFFLOAD_UL	= 1,
+	IPA_CS_OFFLOAD_DL	= 2,
+	IPA_CS_RSVD
+};
+
+/** enum ipa_aggr_en - aggregation type field in ENDP_INIT_AGGR_N */
+enum ipa_aggr_en {
+	IPA_BYPASS_AGGR		= 0,
+	IPA_ENABLE_AGGR		= 1,
+	IPA_ENABLE_DEAGGR	= 2,
+};
+
+/** enum ipa_aggr_type - aggregation type field in in_ENDP_INIT_AGGR_N */
+enum ipa_aggr_type {
+	IPA_MBIM_16 = 0,
+	IPA_HDLC    = 1,
+	IPA_TLP	    = 2,
+	IPA_RNDIS   = 3,
+	IPA_GENERIC = 4,
+	IPA_QCMAP   = 6,
+};
+
+/** enum ipa_mode - mode field in ENDP_INIT_MODE_N */
+enum ipa_mode {
+	IPA_BASIC			= 0,
+	IPA_ENABLE_FRAMING_HDLC		= 1,
+	IPA_ENABLE_DEFRAMING_HDLC	= 2,
+	IPA_DMA				= 3,
+};
+
+/**
+ * enum ipa_seq_type - HPS and DPS sequencer type fields in in ENDP_INIT_SEQ_N
+ * @IPA_SEQ_DMA_ONLY:		only DMA is performed
+ * @IPA_SEQ_PKT_PROCESS_NO_DEC_UCP:
+ *	packet processing + no decipher + microcontroller (Ethernet Bridging)
+ * @IPA_SEQ_2ND_PKT_PROCESS_PASS_NO_DEC_UCP:
+ *	second packet processing pass + no decipher + microcontroller
+ * @IPA_SEQ_DMA_DEC:		DMA + cipher/decipher
+ * @IPA_SEQ_DMA_COMP_DECOMP:	DMA + compression/decompression
+ * @IPA_SEQ_INVALID:		invalid sequencer type
+ */
+enum ipa_seq_type {
+	IPA_SEQ_DMA_ONLY			= 0x00,
+	IPA_SEQ_PKT_PROCESS_NO_DEC_UCP		= 0x02,
+	IPA_SEQ_2ND_PKT_PROCESS_PASS_NO_DEC_UCP	= 0x04,
+	IPA_SEQ_DMA_DEC				= 0x11,
+	IPA_SEQ_DMA_COMP_DECOMP			= 0x20,
+	IPA_SEQ_INVALID				= 0xff,
+};
+
+#endif /* _IPA_REG_H_ */