@@ -260,6 +260,7 @@
compatible = "hisilicon,hi6220-aoctrl", "syscon";
reg = <0x0 0xf7800000 0x0 0x2000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
sys_ctrl: sys_ctrl@f7030000 {
@@ -89,8 +89,9 @@ static void __init hi6220_clk_ao_init(struct device_node *np)
hisi_clk_register_gate_sep(hi6220_separated_gate_clks_ao,
ARRAY_SIZE(hi6220_separated_gate_clks_ao), clk_data_ao);
}
-CLK_OF_DECLARE(hi6220_clk_ao, "hisilicon,hi6220-aoctrl", hi6220_clk_ao_init);
+/* reset driver also probes and uses these registers */
+CLK_OF_DECLARE_DRIVER(hi6220_clk_ao, "hisilicon,hi6220-aoctrl", hi6220_clk_ao_init);
/* clocks in sysctrl */
static const char *mmc0_mux0_p[] __initdata = { "pll_ddr_gate", "syspll", };
@@ -36,6 +36,7 @@
enum hi6220_reset_ctrl_type {
PERIPHERAL,
MEDIA,
+ AO,
};
struct hi6220_reset_data {
@@ -95,6 +96,61 @@ static const struct reset_control_ops hi6220_media_reset_ops = {
.deassert = hi6220_media_deassert,
};
+#define AO_SCTRL_SC_PW_CLKEN0 0x800
+#define AO_SCTRL_SC_PW_CLKDIS0 0x804
+
+#define AO_SCTRL_SC_PW_RSTEN0 0x810
+#define AO_SCTRL_SC_PW_RSTDIS0 0x814
+
+#define AO_SCTRL_SC_PW_ISOEN0 0x820
+#define AO_SCTRL_SC_PW_ISODIS0 0x824
+#define AO_MAX_INDEX 12
+
+static int hi6220_ao_assert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
+{
+ struct hi6220_reset_data *data = to_reset_data(rc_dev);
+ struct regmap *regmap = data->regmap;
+ int ret;
+
+ ret = regmap_write(regmap, AO_SCTRL_SC_PW_RSTEN0, BIT(idx));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, AO_SCTRL_SC_PW_ISOEN0, BIT(idx));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, AO_SCTRL_SC_PW_CLKDIS0, BIT(idx));
+ if (ret)
+ return ret;
+}
+
+static int hi6220_ao_deassert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
+{
+ struct hi6220_reset_data *data = to_reset_data(rc_dev);
+ struct regmap *regmap = data->regmap;
+ int ret;
+
+ ret = regmap_write(regmap, AO_SCTRL_SC_PW_RSTDIS0, BIT(idx));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, AO_SCTRL_SC_PW_ISODIS0, BIT(idx));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, AO_SCTRL_SC_PW_CLKEN0, BIT(idx));
+ if (ret)
+ return ret;
+}
+
+static const struct reset_control_ops hi6220_ao_reset_ops = {
+ .assert = hi6220_ao_assert,
+ .deassert = hi6220_ao_deassert,
+};
+
static int hi6220_reset_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -120,9 +176,12 @@ static int hi6220_reset_probe(struct platform_device *pdev)
if (type == MEDIA) {
data->rc_dev.ops = &hi6220_media_reset_ops;
data->rc_dev.nr_resets = MEDIA_MAX_INDEX;
- } else {
+ } else if (type == PERIPHERAL) {
data->rc_dev.ops = &hi6220_peripheral_reset_ops;
data->rc_dev.nr_resets = PERIPH_MAX_INDEX;
+ } else {
+ data->rc_dev.ops = &hi6220_ao_reset_ops;
+ data->rc_dev.nr_resets = AO_MAX_INDEX;
}
return reset_controller_register(&data->rc_dev);
@@ -137,6 +196,10 @@ static const struct of_device_id hi6220_reset_match[] = {
.compatible = "hisilicon,hi6220-mediactrl",
.data = (void *)MEDIA,
},
+ {
+ .compatible = "hisilicon,hi6220-aoctrl",
+ .data = (void *)AO,
+ },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, hi6220_reset_match);
This is required to bring Mali450 gpu out of reset. Also we now use CLK_OF_DECLARE_DRIVER to probe in both the clock and reset drivers. The clock and reset parts have been done as one atomic commit to avoid a bisection hole. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 1 + drivers/clk/hisilicon/clk-hi6220.c | 3 +- drivers/reset/hisilicon/hi6220_reset.c | 65 ++++++++++++++++++++++++++++++- 3 files changed, 67 insertions(+), 2 deletions(-) -- 2.7.4