| Message ID | 20190415202501.941196-4-arnd@arndb.de |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Mon, Apr 15, 2019 at 10:27 PM Arnd Bergmann <arnd@arndb.de> wrote: > Properly splitting this out into a portable driver is > hard, as the gpio code tightly interacts with the irqchip > code. Give up and move it back to its original location, > but make the headers private in the process. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> I bet a million to one it "just" needs to be reworked into a hierarchical interrupt controller with the GPIO at the level below the irqchip adding level semantics. I did provide an example of how to do this in the ixp4xx patchset, but if you don't have the hardware at hand I would not recommend trying it. With the goal of getting a better build for ARM32 maintenance I think this is a lesser evil, so: Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 439b22255a32..0a64557c3050 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -4,7 +4,7 @@ # Makefile for KS8695 architecture support # -obj-y := cpu.o irq.o time.o devices.o +obj-y := cpu.o irq.o time.o devices.o gpio.o # PCI support is optional obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index 5783062224c3..9baa7f91811e 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -34,7 +34,7 @@ #include <asm/mach/irq.h> #include "devices.h" -#include <mach/gpio-ks8695.h> +#include "gpio-ks8695.h" #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index 13537e9c5485..d3cfc9c955ad 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -29,7 +29,7 @@ #include <asm/mach/irq.h> #include "devices.h" -#include <mach/gpio-ks8695.h> +#include "gpio-ks8695.h" #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 69cfb9935fc1..69a27dfe8232 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -18,7 +18,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/gpio-ks8695.h> +#include "gpio-ks8695.h" #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c index 478ebd1f2b0f..7b962ba1425d 100644 --- a/arch/arm/mach-ks8695/board-og.c +++ b/arch/arm/mach-ks8695/board-og.c @@ -19,8 +19,8 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "devices.h" -#include <mach/regs-gpio.h> -#include <mach/gpio-ks8695.h> +#include "regs-gpio.h" +#include "gpio-ks8695.h" #include "generic.h" static int og_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/gpio-ks8695.h similarity index 100% rename from arch/arm/mach-ks8695/include/mach/gpio-ks8695.h rename to arch/arm/mach-ks8695/gpio-ks8695.h diff --git a/drivers/gpio/gpio-ks8695.c b/arch/arm/mach-ks8695/gpio.c similarity index 98% rename from drivers/gpio/gpio-ks8695.c rename to arch/arm/mach-ks8695/gpio.c index d6d6140ffc40..3a6c8f804f91 100644 --- a/drivers/gpio/gpio-ks8695.c +++ b/arch/arm/mach-ks8695/gpio.c @@ -28,10 +28,10 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <asm/mach/irq.h> +#include <mach/irqs.h> -#include <mach/regs-gpio.h> -#include <mach/gpio-ks8695.h> +#include "regs-gpio.h" +#include "gpio-ks8695.h" /* * Configure a GPIO line for either GPIO function, or its internal diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index 31439f2ee21e..ee3f08f66e7e 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -32,7 +32,7 @@ #include <asm/mach/irq.h> #include <mach/regs-irq.h> -#include <mach/regs-gpio.h> +#include "regs-gpio.h" static void ks8695_irq_mask(struct irq_data *d) { diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/regs-gpio.h similarity index 97% rename from arch/arm/mach-ks8695/include/mach/regs-gpio.h rename to arch/arm/mach-ks8695/regs-gpio.h index 90614a7d0548..c97414b8825a 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-gpio.h +++ b/arch/arm/mach-ks8695/regs-gpio.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-ks8695/include/mach/regs-gpio.h - * * Copyright (C) 2007 Andrew Victor * * KS8695 - GPIO control registers and bit definitions. diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 54d55274b93a..a3b44ef6a8ea 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -64,7 +64,6 @@ obj-$(CONFIG_GPIO_IOP) += gpio-iop.o obj-$(CONFIG_GPIO_IT87) += gpio-it87.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o -obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
Properly splitting this out into a portable driver is hard, as the gpio code tightly interacts with the irqchip code. Give up and move it back to its original location, but make the headers private in the process. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/mach-ks8695/Makefile | 2 +- arch/arm/mach-ks8695/board-acs5k.c | 2 +- arch/arm/mach-ks8695/board-dsm320.c | 2 +- arch/arm/mach-ks8695/board-micrel.c | 2 +- arch/arm/mach-ks8695/board-og.c | 4 ++-- arch/arm/mach-ks8695/{include/mach => }/gpio-ks8695.h | 0 drivers/gpio/gpio-ks8695.c => arch/arm/mach-ks8695/gpio.c | 6 +++--- arch/arm/mach-ks8695/irq.c | 2 +- arch/arm/mach-ks8695/{include/mach => }/regs-gpio.h | 2 -- drivers/gpio/Makefile | 1 - 10 files changed, 10 insertions(+), 13 deletions(-) rename arch/arm/mach-ks8695/{include/mach => }/gpio-ks8695.h (100%) rename drivers/gpio/gpio-ks8695.c => arch/arm/mach-ks8695/gpio.c (98%) rename arch/arm/mach-ks8695/{include/mach => }/regs-gpio.h (97%) -- 2.20.0