@@ -9,7 +9,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS3=y
-CONFIG_EXYNOS5420_MCPM=y
CONFIG_SMP=y
CONFIG_BIG_LITTLE=y
CONFIG_NR_CPUS=8
@@ -33,7 +33,6 @@ CONFIG_MACH_BERLIN_BG2CD=y
CONFIG_MACH_BERLIN_BG2Q=y
CONFIG_ARCH_DIGICOLOR=y
CONFIG_ARCH_EXYNOS=y
-CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_HI3xxx=y
@@ -106,21 +106,15 @@ config SOC_EXYNOS5420
bool "SAMSUNG EXYNOS5420"
default y
depends on ARCH_EXYNOS5
+ select MCPM if SMP
+ select ARM_CCI400_PORT_CTRL
+ select ARM_CPU_SUSPEND
config SOC_EXYNOS5800
bool "SAMSUNG EXYNOS5800"
default y
depends on SOC_EXYNOS5420
-config EXYNOS5420_MCPM
- bool "Exynos5420 Multi-Cluster PM support"
- depends on MCPM && SOC_EXYNOS5420
- select ARM_CCI400_PORT_CTRL
- select ARM_CPU_SUSPEND
- help
- This is needed to provide CPU and cluster power management
- on Exynos5420 implementing big.LITTLE.
-
config EXYNOS_CPU_SUSPEND
bool
select ARM_CPU_SUSPEND
@@ -18,5 +18,5 @@ plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec)
-obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o
+obj-$(CONFIG_MCPM) += mcpm-exynos.o
CFLAGS_mcpm-exynos.o += -march=armv7-a
@@ -268,7 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
+ if (IS_ENABLED(CONFIG_MCPM)) {
mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
mcpm_cpu_suspend();
}
@@ -351,7 +351,7 @@ static void exynos5420_pm_prepare(void)
exynos_pm_enter_sleep_mode();
/* ensure at least INFORM0 has the resume address */
- if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
+ if (IS_ENABLED(CONFIG_MCPM))
pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0);
tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0));
@@ -455,7 +455,7 @@ static void exynos5420_prepare_pm_resume(void)
mpidr = read_cpuid_mpidr();
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
- if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
+ if (IS_ENABLED(CONFIG_MCPM))
WARN_ON(mcpm_cpu_powered_up());
if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) {
Support for Exynos5420/5422/5800 SoCs requires MCPM to properly boot all CPU cores on all currectly supported platforms: Peach Pit (Exynos5420), Odroid XU3/XU3lite/XU4/HC1 (Exynos5422) and Peach Pi (Exynos5800). Without it some CPU cores fail to come online. Remove then the ability to disable MCPM and make it mandatory when Exynos542x/5800 support is enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- v4: fixed build if !SMP (as suggested by Olof) v3: remove CONFIG_EXYNOS5420_MCPM symbol from defconfigs too v2: rebased on top of the current exynos-next --- arch/arm/configs/exynos_defconfig | 1 - arch/arm/configs/multi_v7_defconfig | 1 - arch/arm/mach-exynos/Kconfig | 12 +++--------- arch/arm/mach-exynos/Makefile | 2 +- arch/arm/mach-exynos/suspend.c | 6 +++--- 5 files changed, 7 insertions(+), 15 deletions(-) -- 2.17.1