diff mbox series

[BACKPORT,4.4.y,17/25] mmc: core: don't try to switch block size for dual rate mode

Message ID 20190322154425.3852517-18-arnd@arndb.de
State New
Headers show
Series None | expand

Commit Message

Arnd Bergmann March 22, 2019, 3:44 p.m. UTC 
From: Ziyuan Xu <xzy.xu@rock-chips.com>


Per spec, block size should always be 512 bytes for dual rate mode,
so any attempts to switch the block size under dual rate mode should
be neglected.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

(cherry picked from commit 1712c9373f98ae8ed41599a8d7841a6fba29c264)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
 drivers/mmc/core/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

-- 
2.20.0
diff mbox series

Patch

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index df074f8c7cb7..3e17268b9994 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2406,7 +2406,8 @@  int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
 {
 	struct mmc_command cmd = {0};
 
-	if (mmc_card_blockaddr(card) || mmc_card_ddr52(card))
+	if (mmc_card_blockaddr(card) || mmc_card_ddr52(card) ||
+	    mmc_card_hs400(card) || mmc_card_hs400es(card))
 		return 0;
 
 	cmd.opcode = MMC_SET_BLOCKLEN;