diff mbox series

[v8,1/4] can: m_can: Create a m_can platform framework

Message ID 20190312121254.8043-1-dmurphy@ti.com
State Superseded
Headers show
Series [v8,1/4] can: m_can: Create a m_can platform framework | expand

Commit Message

Dan Murphy March 12, 2019, 12:12 p.m. UTC
Create a m_can platform framework that peripherial
devices can register to and use common code and register sets.
The peripherial devices may provide read/write and configuration
support of the IP.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

---

v8 - Added a clean function for the tx_skb, cleaned up skb on BUS_OFF and on xmit
BUSY - https://lore.kernel.org/patchwork/patch/1047980/

v7 - Fixed remaining new checkpatch issues, removed CSR setting, fixed tx hard
start function to return tx_busy, and renamed device callbacks - https://lore.kernel.org/patchwork/patch/1047220/
v6 - Squashed platform patch to this patch for bissectablity, fixed coding style
issues, updated Kconfig help, placed mcan reg offsets back into c file, renamed
priv->skb to priv->tx_skb and cleared perp interrupts at ISR start -
Patch 1 comments - https://lore.kernel.org/patchwork/patch/1042446/
Patch 2 comments - https://lore.kernel.org/patchwork/patch/1042442/

 drivers/net/can/m_can/Kconfig          |  13 +-
 drivers/net/can/m_can/Makefile         |   1 +
 drivers/net/can/m_can/m_can.c          | 717 +++++++++++++------------
 drivers/net/can/m_can/m_can.h          | 110 ++++
 drivers/net/can/m_can/m_can_platform.c | 202 +++++++
 5 files changed, 699 insertions(+), 344 deletions(-)
 create mode 100644 drivers/net/can/m_can/m_can.h
 create mode 100644 drivers/net/can/m_can/m_can_platform.c

-- 
2.20.1.390.gb5101f9297

Comments

Dan Murphy March 12, 2019, 1:17 p.m. UTC | #1
Wolfgang

On 3/12/19 7:43 AM, Wolfgang Grandegger wrote:
> Hello Dan,

> 

> Am 12.03.19 um 13:12 schrieb Dan Murphy:

>> Create a m_can platform framework that peripherial

>> devices can register to and use common code and register sets.

>> The peripherial devices may provide read/write and configuration

>> support of the IP.

>>

>> Signed-off-by: Dan Murphy <dmurphy@ti.com>

>> ---

>>

>> v8 - Added a clean function for the tx_skb, cleaned up skb on BUS_OFF and on xmit

>> BUSY - https://lore.kernel.org/patchwork/patch/1047980/

>>

>> v7 - Fixed remaining new checkpatch issues, removed CSR setting, fixed tx hard

>> start function to return tx_busy, and renamed device callbacks - https://lore.kernel.org/patchwork/patch/1047220/

>> v6 - Squashed platform patch to this patch for bissectablity, fixed coding style

>> issues, updated Kconfig help, placed mcan reg offsets back into c file, renamed

>> priv->skb to priv->tx_skb and cleared perp interrupts at ISR start -

>> Patch 1 comments - https://lore.kernel.org/patchwork/patch/1042446/

>> Patch 2 comments - https://lore.kernel.org/patchwork/patch/1042442/

>>

>>  drivers/net/can/m_can/Kconfig          |  13 +-

>>  drivers/net/can/m_can/Makefile         |   1 +

>>  drivers/net/can/m_can/m_can.c          | 717 +++++++++++++------------

>>  drivers/net/can/m_can/m_can.h          | 110 ++++

>>  drivers/net/can/m_can/m_can_platform.c | 202 +++++++

>>  5 files changed, 699 insertions(+), 344 deletions(-)

>>  create mode 100644 drivers/net/can/m_can/m_can.h

>>  create mode 100644 drivers/net/can/m_can/m_can_platform.c

>>

>> diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig

>> index 04f20dd39007..f7119fd72df4 100644

>> --- a/drivers/net/can/m_can/Kconfig

>> +++ b/drivers/net/can/m_can/Kconfig

>> @@ -1,5 +1,14 @@

>>  config CAN_M_CAN

>> +	tristate "Bosch M_CAN support"

>> +	---help---

>> +	  Say Y here if you want support for Bosch M_CAN controller framework.

>> +	  This is common support for devices that embed the Bosch M_CAN IP.

>> +

>> +config CAN_M_CAN_PLATFORM

>> +	tristate "Bosch M_CAN support for io-mapped devices"

>>  	depends on HAS_IOMEM

>> -	tristate "Bosch M_CAN devices"

>> +	depends on CAN_M_CAN

>>  	---help---

>> -	  Say Y here if you want to support for Bosch M_CAN controller.

>> +	  Say Y here if you want support for IO Mapped Bosch M_CAN controller.

>> +	  This support is for devices that have the Bosch M_CAN controller

>> +	  IP embedded into the device and the IP is IO Mapped to the processor.

>> diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile

>> index 8bbd7f24f5be..057bbcdb3c74 100644

>> --- a/drivers/net/can/m_can/Makefile

>> +++ b/drivers/net/can/m_can/Makefile

>> @@ -3,3 +3,4 @@

>>  #

>>  

>>  obj-$(CONFIG_CAN_M_CAN) += m_can.o

>> +obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o

> 

> ... snip ...

> 

>> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c

>> -static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,

>> -			   void __iomem *addr)

>> +static int m_can_dev_setup(struct m_can_priv *m_can_dev)

>>  {

>> -	struct m_can_priv *priv;

>> +	struct net_device *dev = m_can_dev->net;

>>  	int m_can_version;

>>  

>> -	m_can_version = m_can_check_core_release(addr);

>> +	m_can_version = m_can_check_core_release(m_can_dev);

> 

> What is m_can_version for the tcan4x5x?

> 


I believe it is Bosch M-CAN Revision 3.2.1.1

> ... snip ...

> 

> Wolfgang.

> 



-- 
------------------
Dan Murphy
Wolfgang Grandegger March 12, 2019, 2:42 p.m. UTC | #2
Hello Dan,

in the previous email you said that the tcan4x5x uses:

  Bosch M-CAN Revision 3.2.1.1

This means "cdev->version == 32", hence it's using FIFOs...

Am 12.03.19 um 13:12 schrieb Dan Murphy:
> Create a m_can platform framework that peripherial

> devices can register to and use common code and register sets.

> The peripherial devices may provide read/write and configuration

> support of the IP.

> 

> Signed-off-by: Dan Murphy <dmurphy@ti.com>

> ---

> 

> v8 - Added a clean function for the tx_skb, cleaned up skb on BUS_OFF and on xmit

> BUSY - https://lore.kernel.org/patchwork/patch/1047980/

> 

> v7 - Fixed remaining new checkpatch issues, removed CSR setting, fixed tx hard

> start function to return tx_busy, and renamed device callbacks - https://lore.kernel.org/patchwork/patch/1047220/

> v6 - Squashed platform patch to this patch for bissectablity, fixed coding style

> issues, updated Kconfig help, placed mcan reg offsets back into c file, renamed

> priv->skb to priv->tx_skb and cleared perp interrupts at ISR start -

> Patch 1 comments - https://lore.kernel.org/patchwork/patch/1042446/

> Patch 2 comments - https://lore.kernel.org/patchwork/patch/1042442/

> 

>  drivers/net/can/m_can/Kconfig          |  13 +-

>  drivers/net/can/m_can/Makefile         |   1 +

>  drivers/net/can/m_can/m_can.c          | 717 +++++++++++++------------

>  drivers/net/can/m_can/m_can.h          | 110 ++++

>  drivers/net/can/m_can/m_can_platform.c | 202 +++++++

>  5 files changed, 699 insertions(+), 344 deletions(-)

>  create mode 100644 drivers/net/can/m_can/m_can.h

>  create mode 100644 drivers/net/can/m_can/m_can_platform.c

> 

> diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig

> index 04f20dd39007..f7119fd72df4 100644

> --- a/drivers/net/can/m_can/Kconfig

> +++ b/drivers/net/can/m_can/Kconfig

> @@ -1,5 +1,14 @@

>  config CAN_M_CAN

> +	tristate "Bosch M_CAN support"

> +	---help---

> +	  Say Y here if you want support for Bosch M_CAN controller framework.

> +	  This is common support for devices that embed the Bosch M_CAN IP.

> +

> +config CAN_M_CAN_PLATFORM

> +	tristate "Bosch M_CAN support for io-mapped devices"

>  	depends on HAS_IOMEM

> -	tristate "Bosch M_CAN devices"

> +	depends on CAN_M_CAN

>  	---help---

> -	  Say Y here if you want to support for Bosch M_CAN controller.

> +	  Say Y here if you want support for IO Mapped Bosch M_CAN controller.

> +	  This support is for devices that have the Bosch M_CAN controller

> +	  IP embedded into the device and the IP is IO Mapped to the processor.

> diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile

> index 8bbd7f24f5be..057bbcdb3c74 100644

> --- a/drivers/net/can/m_can/Makefile

> +++ b/drivers/net/can/m_can/Makefile

> @@ -3,3 +3,4 @@

>  #

>  

>  obj-$(CONFIG_CAN_M_CAN) += m_can.o

> +obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o

> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c

> index 9b449400376b..f2231fb02525 100644

> --- a/drivers/net/can/m_can/m_can.c

> +++ b/drivers/net/can/m_can/m_can.c

> @@ -1,20 +1,14 @@

> -/*

> - * CAN bus driver for Bosch M_CAN controller

> - *

> - * Copyright (C) 2014 Freescale Semiconductor, Inc.

> - *	Dong Aisheng <b29396@freescale.com>

> - *

> - * Bosch M_CAN user manual can be obtained from:

> +// SPDX-License-Identifier: GPL-2.0

> +// CAN bus driver for Bosch M_CAN controller

> +// Copyright (C) 2014 Freescale Semiconductor, Inc.

> +//      Dong Aisheng <b29396@freescale.com>

> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/

> +

> +/* Bosch M_CAN user manual can be obtained from:

>   * http://www.bosch-semiconductors.de/media/pdf_1/ipmodules_1/m_can/

>   * mcan_users_manual_v302.pdf

> - *

> - * This file is licensed under the terms of the GNU General Public

> - * License version 2. This program is licensed "as is" without any

> - * warranty of any kind, whether express or implied.

>   */

>  

> -#include <linux/clk.h>

> -#include <linux/delay.h>

>  #include <linux/interrupt.h>

>  #include <linux/io.h>

>  #include <linux/kernel.h>

> @@ -28,11 +22,7 @@

>  #include <linux/can/dev.h>

>  #include <linux/pinctrl/consumer.h>

>  

> -/* napi related */

> -#define M_CAN_NAPI_WEIGHT	64

> -

> -/* message ram configuration data length */

> -#define MRAM_CFG_LEN	8

> +#include "m_can.h"

>  

>  /* registers definition */

>  enum m_can_reg {

> @@ -86,28 +76,11 @@ enum m_can_reg {

>  	M_CAN_TXEFA	= 0xf8,

>  };

>  

> -/* m_can lec values */

> -enum m_can_lec_type {

> -	LEC_NO_ERROR = 0,

> -	LEC_STUFF_ERROR,

> -	LEC_FORM_ERROR,

> -	LEC_ACK_ERROR,

> -	LEC_BIT1_ERROR,

> -	LEC_BIT0_ERROR,

> -	LEC_CRC_ERROR,

> -	LEC_UNUSED,

> -};

> +/* napi related */

> +#define M_CAN_NAPI_WEIGHT	64

>  

> -enum m_can_mram_cfg {

> -	MRAM_SIDF = 0,

> -	MRAM_XIDF,

> -	MRAM_RXF0,

> -	MRAM_RXF1,

> -	MRAM_RXB,

> -	MRAM_TXE,

> -	MRAM_TXB,

> -	MRAM_CFG_NUM,

> -};

> +/* message ram configuration data length */

> +#define MRAM_CFG_LEN	8

>  

>  /* Core Release Register (CREL) */

>  #define CREL_REL_SHIFT		28

> @@ -347,68 +320,72 @@ enum m_can_mram_cfg {

>  #define TX_EVENT_MM_SHIFT	TX_BUF_MM_SHIFT

>  #define TX_EVENT_MM_MASK	(0xff << TX_EVENT_MM_SHIFT)

>  

> -/* address offset and element number for each FIFO/Buffer in the Message RAM */

> -struct mram_cfg {

> -	u16 off;

> -	u8  num;

> -};

> -

> -/* m_can private data structure */

> -struct m_can_priv {

> -	struct can_priv can;	/* must be the first member */

> -	struct napi_struct napi;

> -	struct net_device *dev;

> -	struct device *device;

> -	struct clk *hclk;

> -	struct clk *cclk;

> -	void __iomem *base;

> -	u32 irqstatus;

> -	int version;

> -

> -	/* message ram configuration */

> -	void __iomem *mram_base;

> -	struct mram_cfg mcfg[MRAM_CFG_NUM];

> -};

> +static u32 m_can_read(struct m_can_priv *priv, enum m_can_reg reg)

> +{

> +	if (priv->ops->read_reg)

> +		return priv->ops->read_reg(priv, reg);

> +	else

> +		return -EINVAL;

> +}

>  

> -static inline u32 m_can_read(const struct m_can_priv *priv, enum m_can_reg reg)

> +static int m_can_write(struct m_can_priv *priv, enum m_can_reg reg, u32 val)

>  {

> -	return readl(priv->base + reg);

> +	if (priv->ops->write_reg)

> +		return priv->ops->write_reg(priv, reg, val);

> +	else

> +		return -EINVAL;

>  }

>  

> -static inline void m_can_write(const struct m_can_priv *priv,

> -			       enum m_can_reg reg, u32 val)

> +static u32 m_can_fifo_read(struct m_can_priv *priv,

> +			   u32 fgi, unsigned int offset)

>  {

> -	writel(val, priv->base + reg);

> +	u32 addr_offset = priv->mcfg[MRAM_RXF0].off + fgi * RXF0_ELEMENT_SIZE +

> +			  offset;

> +

> +	if (priv->ops->read_fifo)

> +		return priv->ops->read_fifo(priv, addr_offset);

> +	else

> +		return -EINVAL;

>  }

>  

> -static inline u32 m_can_fifo_read(const struct m_can_priv *priv,

> -				  u32 fgi, unsigned int offset)

> +static u32 m_can_fifo_write(struct m_can_priv *priv,

> +			    u32 fpi, unsigned int offset, u32 val)

>  {

> -	return readl(priv->mram_base + priv->mcfg[MRAM_RXF0].off +

> -		     fgi * RXF0_ELEMENT_SIZE + offset);

> +	u32 addr_offset = priv->mcfg[MRAM_TXB].off + fpi * TXB_ELEMENT_SIZE +

> +			  offset;

> +

> +	if (priv->ops->write_fifo)

> +		return priv->ops->write_fifo(priv, addr_offset, val);

> +	else

> +		return -EINVAL;

>  }

>  

> -static inline void m_can_fifo_write(const struct m_can_priv *priv,

> -				    u32 fpi, unsigned int offset, u32 val)

> +static u32 m_can_fifo_write_no_off(struct m_can_priv *priv,

> +				   u32 fpi, u32 val)

>  {

> -	writel(val, priv->mram_base + priv->mcfg[MRAM_TXB].off +

> -	       fpi * TXB_ELEMENT_SIZE + offset);

> +	if (priv->ops->write_fifo)

> +		return priv->ops->write_fifo(priv, fpi, val);

> +	else

> +		return 0;

>  }

>  

> -static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,

> -				      u32 fgi,

> -				      u32 offset) {

> -	return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +

> -			fgi * TXE_ELEMENT_SIZE + offset);

> +static u32 m_can_txe_fifo_read(struct m_can_priv *priv, u32 fgi, u32 offset)

> +{

> +	u32 addr_offset = priv->mcfg[MRAM_TXE].off + fgi * TXE_ELEMENT_SIZE +

> +			  offset;

> +

> +	if (priv->ops->read_fifo)

> +		return priv->ops->read_fifo(priv, addr_offset);

> +	else

> +		return -EINVAL;

>  }

>  

> -static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)

> +static inline bool m_can_tx_fifo_full(struct m_can_priv *priv)

>  {

>  		return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);

>  }

>  

> -static inline void m_can_config_endisable(const struct m_can_priv *priv,

> -					  bool enable)

> +void m_can_config_endisable(struct m_can_priv *priv, bool enable)

>  {

>  	u32 cccr = m_can_read(priv, M_CAN_CCCR);

>  	u32 timeout = 10;

> @@ -430,7 +407,7 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,

>  

>  	while ((m_can_read(priv, M_CAN_CCCR) & (CCCR_INIT | CCCR_CCE)) != val) {

>  		if (timeout == 0) {

> -			netdev_warn(priv->dev, "Failed to init module\n");

> +			netdev_warn(priv->net, "Failed to init module\n");

>  			return;

>  		}

>  		timeout--;

> @@ -438,17 +415,29 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,

>  	}

>  }

>  

> -static inline void m_can_enable_all_interrupts(const struct m_can_priv *priv)

> +static inline void m_can_enable_all_interrupts(struct m_can_priv *priv)

>  {

>  	/* Only interrupt line 0 is used in this driver */

>  	m_can_write(priv, M_CAN_ILE, ILE_EINT0);

>  }

>  

> -static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)

> +static inline void m_can_disable_all_interrupts(struct m_can_priv *priv)

>  {

>  	m_can_write(priv, M_CAN_ILE, 0x0);

>  }

>  

> +static void m_can_clean(struct net_device *net)

> +{

> +	struct m_can_priv *priv = netdev_priv(net);

> +

> +	if (priv->tx_skb) {

> +		net->stats.tx_errors++;

> +		dev_kfree_skb(priv->tx_skb);

> +		can_free_echo_skb(priv->net, 0);


I think this frees the skb twice!

Also, the index depends on "cdev->version"! If > 30, the last used index
should be selected.

> +		priv->tx_skb = NULL;

> +	}

> +}

> +

>  static void m_can_read_fifo(struct net_device *dev, u32 rxfs)

>  {

>  	struct net_device_stats *stats = &dev->stats;

> @@ -633,9 +622,12 @@ static int m_can_clk_start(struct m_can_priv *priv)

>  {

>  	int err;

>  

> -	err = pm_runtime_get_sync(priv->device);

> +	if (priv->pm_clock_support == 0)

> +		return 0;

> +

> +	err = pm_runtime_get_sync(priv->dev);

>  	if (err < 0) {

> -		pm_runtime_put_noidle(priv->device);

> +		pm_runtime_put_noidle(priv->dev);

>  		return err;

>  	}

>  

> @@ -644,7 +636,8 @@ static int m_can_clk_start(struct m_can_priv *priv)

>  

>  static void m_can_clk_stop(struct m_can_priv *priv)

>  {

> -	pm_runtime_put_sync(priv->device);

> +	if (priv->pm_clock_support)

> +		pm_runtime_put_sync(priv->dev);

>  }

>  

>  static int m_can_get_berr_counter(const struct net_device *dev,

> @@ -811,9 +804,8 @@ static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,

>  	return work_done;

>  }

>  

> -static int m_can_poll(struct napi_struct *napi, int quota)

> +static int m_can_rx_handler(struct net_device *dev, int quota)

>  {

> -	struct net_device *dev = napi->dev;

>  	struct m_can_priv *priv = netdev_priv(dev);

>  	int work_done = 0;

>  	u32 irqstatus, psr;

> @@ -831,13 +823,33 @@ static int m_can_poll(struct napi_struct *napi, int quota)

>  

>  	if (irqstatus & IR_RF0N)

>  		work_done += m_can_do_rx_poll(dev, (quota - work_done));

> +end:

> +	return work_done;

> +}

> +

> +static int m_can_rx_peripherial(struct net_device *dev)

> +{

> +	struct m_can_priv *priv = netdev_priv(dev);

> +

> +	m_can_rx_handler(dev, 1);

> +

> +	m_can_enable_all_interrupts(priv);

>  

> +	return 0;

> +}

> +

> +static int m_can_poll(struct napi_struct *napi, int quota)

> +{

> +	struct net_device *dev = napi->dev;

> +	struct m_can_priv *priv = netdev_priv(dev);

> +	int work_done;

> +

> +	work_done = m_can_rx_handler(dev, quota);

>  	if (work_done < quota) {

>  		napi_complete_done(napi, work_done);

>  		m_can_enable_all_interrupts(priv);

>  	}

>  

> -end:

>  	return work_done;

>  }

>  

> @@ -894,6 +906,9 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)

>  	if (ir & IR_ALL_INT)

>  		m_can_write(priv, M_CAN_IR, ir);

>  

> +	if (priv->ops->clear_interrupts)

> +		priv->ops->clear_interrupts(priv);

> +

>  	/* schedule NAPI in case of

>  	 * - rx IRQ

>  	 * - state change IRQ

> @@ -902,7 +917,10 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)

>  	if ((ir & IR_RF0N) || (ir & IR_ERR_ALL_30X)) {

>  		priv->irqstatus = ir;

>  		m_can_disable_all_interrupts(priv);

> -		napi_schedule(&priv->napi);

> +		if (!priv->is_peripherial)

> +			napi_schedule(&priv->napi);

> +		else

> +			m_can_rx_peripherial(dev);

>  	}

>  

>  	if (priv->version == 30) {

> @@ -1155,6 +1173,9 @@ static void m_can_chip_config(struct net_device *dev)

>  	m_can_set_bittiming(dev);

>  

>  	m_can_config_endisable(priv, false);

> +

> +	if (priv->ops->init)

> +		priv->ops->init(priv);

>  }

>  

>  static void m_can_start(struct net_device *dev)

> @@ -1173,6 +1194,7 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)

>  {

>  	switch (mode) {

>  	case CAN_MODE_START:

> +		m_can_clean(dev);

>  		m_can_start(dev);

>  		netif_wake_queue(dev);

>  		break;

> @@ -1188,20 +1210,17 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)

>   * else it returns the release and step coded as:

>   * return value = 10 * <release> + 1 * <step>

>   */

> -static int m_can_check_core_release(void __iomem *m_can_base)

> +static int m_can_check_core_release(struct m_can_priv *priv)

>  {

>  	u32 crel_reg;

>  	u8 rel;

>  	u8 step;

>  	int res;

> -	struct m_can_priv temp_priv = {

> -		.base = m_can_base

> -	};

>  

>  	/* Read Core Release Version and split into version number

>  	 * Example: Version 3.2.1 => rel = 3; step = 2; substep = 1;

>  	 */

> -	crel_reg = m_can_read(&temp_priv, M_CAN_CREL);

> +	crel_reg = m_can_read(priv, M_CAN_CREL);

>  	rel = (u8)((crel_reg & CREL_REL_MASK) >> CREL_REL_SHIFT);

>  	step = (u8)((crel_reg & CREL_STEP_MASK) >> CREL_STEP_SHIFT);

>  

> @@ -1219,18 +1238,26 @@ static int m_can_check_core_release(void __iomem *m_can_base)

>  /* Selectable Non ISO support only in version 3.2.x

>   * This function checks if the bit is writable.

>   */

> -static bool m_can_niso_supported(const struct m_can_priv *priv)

> +static bool m_can_niso_supported(struct m_can_priv *priv)

>  {

> -	u32 cccr_reg, cccr_poll;

> -	int niso_timeout;

> +	u32 cccr_reg, cccr_poll = 0;

> +	int niso_timeout = -ETIMEDOUT;

> +	int i;

>  

>  	m_can_config_endisable(priv, true);

>  	cccr_reg = m_can_read(priv, M_CAN_CCCR);

>  	cccr_reg |= CCCR_NISO;

>  	m_can_write(priv, M_CAN_CCCR, cccr_reg);

>  

> -	niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,

> -					  (cccr_poll == cccr_reg), 0, 10);

> +	for (i = 0; i <= 10; i++) {

> +		cccr_poll = m_can_read(priv, M_CAN_CCCR);

> +		if (cccr_poll == cccr_reg) {

> +			niso_timeout = 0;

> +			break;

> +		}

> +

> +		usleep_range(1, 5);

> +	}

>  

>  	/* Clear NISO */

>  	cccr_reg &= ~(CCCR_NISO);

> @@ -1242,107 +1269,79 @@ static bool m_can_niso_supported(const struct m_can_priv *priv)

>  	return !niso_timeout;

>  }

>  

> -static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,

> -			   void __iomem *addr)

> +static int m_can_dev_setup(struct m_can_priv *m_can_dev)

>  {

> -	struct m_can_priv *priv;

> +	struct net_device *dev = m_can_dev->net;

>  	int m_can_version;

>  

> -	m_can_version = m_can_check_core_release(addr);

> +	m_can_version = m_can_check_core_release(m_can_dev);

>  	/* return if unsupported version */

>  	if (!m_can_version) {

> -		dev_err(&pdev->dev, "Unsupported version number: %2d",

> +		dev_err(m_can_dev->dev, "Unsupported version number: %2d",

>  			m_can_version);

>  		return -EINVAL;

>  	}

>  

> -	priv = netdev_priv(dev);

> -	netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);

> +	if (!m_can_dev->is_peripherial)

> +		netif_napi_add(dev, &m_can_dev->napi,

> +			       m_can_poll, M_CAN_NAPI_WEIGHT);

>  

>  	/* Shared properties of all M_CAN versions */

> -	priv->version = m_can_version;

> -	priv->dev = dev;

> -	priv->base = addr;

> -	priv->can.do_set_mode = m_can_set_mode;

> -	priv->can.do_get_berr_counter = m_can_get_berr_counter;

> +	m_can_dev->version = m_can_version;

> +	m_can_dev->can.do_set_mode = m_can_set_mode;

> +	m_can_dev->can.do_get_berr_counter = m_can_get_berr_counter;

>  

>  	/* Set M_CAN supported operations */

> -	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |

> +	m_can_dev->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |

>  					CAN_CTRLMODE_LISTENONLY |

>  					CAN_CTRLMODE_BERR_REPORTING |

>  					CAN_CTRLMODE_FD;

>  

>  	/* Set properties depending on M_CAN version */

> -	switch (priv->version) {

> +	switch (m_can_dev->version) {

>  	case 30:

>  		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.x */

>  		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);

> -		priv->can.bittiming_const = &m_can_bittiming_const_30X;

> -		priv->can.data_bittiming_const =

> -				&m_can_data_bittiming_const_30X;

> +		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?

> +			m_can_dev->bit_timing : &m_can_bittiming_const_30X;

> +

> +		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?

> +						m_can_dev->data_timing :

> +						&m_can_data_bittiming_const_30X;

>  		break;

>  	case 31:

>  		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */

>  		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);

> -		priv->can.bittiming_const = &m_can_bittiming_const_31X;

> -		priv->can.data_bittiming_const =

> -				&m_can_data_bittiming_const_31X;

> +		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?

> +			m_can_dev->bit_timing : &m_can_bittiming_const_31X;

> +

> +		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?

> +						m_can_dev->data_timing :

> +						&m_can_data_bittiming_const_31X;

>  		break;

>  	case 32:

> -		priv->can.bittiming_const = &m_can_bittiming_const_31X;

> -		priv->can.data_bittiming_const =

> -				&m_can_data_bittiming_const_31X;

> -		priv->can.ctrlmode_supported |= (m_can_niso_supported(priv)

> +		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?

> +			m_can_dev->bit_timing : &m_can_bittiming_const_31X;

> +

> +		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?

> +						m_can_dev->data_timing :

> +						&m_can_data_bittiming_const_31X;

> +

> +		m_can_dev->can.ctrlmode_supported |=

> +						(m_can_niso_supported(m_can_dev)

>  						? CAN_CTRLMODE_FD_NON_ISO

>  						: 0);

>  		break;

>  	default:

> -		dev_err(&pdev->dev, "Unsupported version number: %2d",

> -			priv->version);

> +		dev_err(m_can_dev->dev, "Unsupported version number: %2d",

> +			m_can_dev->version);

>  		return -EINVAL;

>  	}

>  

> -	return 0;

> -}

> -

> -static int m_can_open(struct net_device *dev)

> -{

> -	struct m_can_priv *priv = netdev_priv(dev);

> -	int err;

> -

> -	err = m_can_clk_start(priv);

> -	if (err)

> -		return err;

> -

> -	/* open the can device */

> -	err = open_candev(dev);

> -	if (err) {

> -		netdev_err(dev, "failed to open can device\n");

> -		goto exit_disable_clks;

> -	}

> -

> -	/* register interrupt handler */

> -	err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,

> -			  dev);

> -	if (err < 0) {

> -		netdev_err(dev, "failed to request interrupt\n");

> -		goto exit_irq_fail;

> -	}

> -

> -	/* start the m_can controller */

> -	m_can_start(dev);

> -

> -	can_led_event(dev, CAN_LED_EVENT_OPEN);

> -	napi_enable(&priv->napi);

> -	netif_start_queue(dev);

> +	if (m_can_dev->ops->init)

> +		m_can_dev->ops->init(m_can_dev);

>  

>  	return 0;

> -

> -exit_irq_fail:

> -	close_candev(dev);

> -exit_disable_clks:

> -	m_can_clk_stop(priv);

> -	return err;

>  }

>  

>  static void m_can_stop(struct net_device *dev)

> @@ -1361,10 +1360,18 @@ static int m_can_close(struct net_device *dev)

>  	struct m_can_priv *priv = netdev_priv(dev);

>  

>  	netif_stop_queue(dev);

> -	napi_disable(&priv->napi);

> +	if (!priv->is_peripherial)

> +		napi_disable(&priv->napi);

>  	m_can_stop(dev);

>  	m_can_clk_stop(priv);

>  	free_irq(dev->irq, dev);

> +

> +	if (priv->is_peripherial) {

> +		priv->tx_skb = NULL;

> +		destroy_workqueue(priv->tx_wq);

> +		priv->tx_wq = NULL;

> +	}

> +

>  	close_candev(dev);

>  	can_led_event(dev, CAN_LED_EVENT_STOP);

>  

> @@ -1385,18 +1392,15 @@ static int m_can_next_echo_skb_occupied(struct net_device *dev, int putidx)

>  	return !!priv->can.echo_skb[next_idx];

>  }

>  

> -static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,

> -				    struct net_device *dev)

> +static netdev_tx_t m_can_tx_handler(struct m_can_priv *priv)

>  {

> -	struct m_can_priv *priv = netdev_priv(dev);

> -	struct canfd_frame *cf = (struct canfd_frame *)skb->data;

> +	struct canfd_frame *cf = (struct canfd_frame *)priv->tx_skb->data;

> +	struct net_device *dev = priv->net;

> +	struct sk_buff *skb = priv->tx_skb;

>  	u32 id, cccr, fdflags;

>  	int i;

>  	int putidx;

>  

> -	if (can_dropped_invalid_skb(dev, skb))

> -		return NETDEV_TX_OK;

> -

>  	/* Generate ID field for TX buffer Element */

>  	/* Common to all supported M_CAN versions */

>  	if (cf->can_id & CAN_EFF_FLAG) {

> @@ -1492,14 +1496,117 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,

>  		m_can_write(priv, M_CAN_TXBAR, (1 << putidx));

>  

>  		/* stop network queue if fifo full */

> -			if (m_can_tx_fifo_full(priv) ||

> -			    m_can_next_echo_skb_occupied(dev, putidx))

> -				netif_stop_queue(dev);

> +		if (m_can_tx_fifo_full(priv) ||

> +		    m_can_next_echo_skb_occupied(dev, putidx))

> +			netif_stop_queue(dev);

> +	}

> +

> +	return NETDEV_TX_OK;

> +}

> +

> +static void m_can_tx_work_queue(struct work_struct *ws)

> +{

> +	struct m_can_priv *priv = container_of(ws, struct m_can_priv,

> +						tx_work);

> +	netdev_tx_t ret;

> +

> +	ret = m_can_tx_handler(priv);

> +	if (ret == NETDEV_TX_OK)

> +		priv->tx_skb = NULL;


What happens to the "tx_skb" if this funtions returns with
NETDEV_TX_BUSY? Will it be freed?

> +}

> +

> +static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,

> +				    struct net_device *dev)

> +{

> +	struct m_can_priv *priv = netdev_priv(dev);

> +

> +	if (can_dropped_invalid_skb(dev, skb))

> +		return NETDEV_TX_OK;

> +

> +	if (priv->is_peripherial) {

> +		if (priv->tx_skb) {

> +			netdev_err(dev, "hard_xmit called while tx busy\n");

> +			return NETDEV_TX_BUSY;

> +		}

> +

> +		if (priv->can.state == CAN_STATE_BUS_OFF) {

> +			m_can_clean(dev);

> +		} else {

> +			priv->tx_skb = skb;

> +			netif_stop_queue(priv->net);


You stop the queue immediately, even if fifos are used. Is this by purpose?

> +			queue_work(priv->tx_wq, &priv->tx_work);

> +		}

> +	} else {

> +		priv->tx_skb = skb;

> +		return m_can_tx_handler(priv);

>  	}

>  

>  	return NETDEV_TX_OK;

>  }

>  

> +static int m_can_open(struct net_device *dev)

> +{

> +	struct m_can_priv *priv = netdev_priv(dev);

> +	int err;

> +

> +	err = m_can_clk_start(priv);

> +	if (err)

> +		return err;

> +

> +	/* open the can device */

> +	err = open_candev(dev);

> +	if (err) {

> +		netdev_err(dev, "failed to open can device\n");

> +		goto exit_disable_clks;

> +	}

> +

> +	/* register interrupt handler */

> +	if (priv->is_peripherial) {

> +		priv->tx_skb = NULL;

> +		priv->tx_wq = alloc_workqueue("mcan_wq",

> +					      WQ_FREEZABLE | WQ_MEM_RECLAIM, 0);

> +		if (!priv->tx_wq) {

> +			err = -ENOMEM;

> +			goto out_wq_fail;

> +		}

> +

> +		INIT_WORK(&priv->tx_work, m_can_tx_work_queue);

> +

> +		err = request_threaded_irq(dev->irq, NULL, m_can_isr,

> +					   IRQF_ONESHOT | IRQF_TRIGGER_FALLING,

> +					   dev->name, dev);

> +	} else {

> +		err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,

> +				  dev);

> +	}

> +

> +	if (err < 0) {

> +		netdev_err(dev, "failed to request interrupt\n");

> +		goto exit_irq_fail;

> +	}

> +

> +	/* start the m_can controller */

> +	m_can_start(dev);

> +

> +	can_led_event(dev, CAN_LED_EVENT_OPEN);

> +

> +	if (!priv->is_peripherial)

> +		napi_enable(&priv->napi);

> +

> +	netif_start_queue(dev);

> +

> +	return 0;

> +

> +exit_irq_fail:

> +	if (priv->is_peripherial)

> +		destroy_workqueue(priv->tx_wq);

> +out_wq_fail:

> +	close_candev(dev);

> +exit_disable_clks:

> +	m_can_clk_stop(priv);

> +	return err;

> +}

> +

>  static const struct net_device_ops m_can_netdev_ops = {

>  	.ndo_open = m_can_open,

>  	.ndo_stop = m_can_close,

> @@ -1515,20 +1622,6 @@ static int register_m_can_dev(struct net_device *dev)

>  	return register_candev(dev);

>  }

>  

> -static void m_can_init_ram(struct m_can_priv *priv)

> -{

> -	int end, i, start;

> -

> -	/* initialize the entire Message RAM in use to avoid possible

> -	 * ECC/parity checksum errors when reading an uninitialized buffer

> -	 */

> -	start = priv->mcfg[MRAM_SIDF].off;

> -	end = priv->mcfg[MRAM_TXB].off +

> -		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;

> -	for (i = start; i < end; i += 4)

> -		writel(0x0, priv->mram_base + i);

> -}

> -

>  static void m_can_of_parse_mram(struct m_can_priv *priv,

>  				const u32 *mram_config_vals)

>  {

> @@ -1556,9 +1649,8 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,

>  	priv->mcfg[MRAM_TXB].num = mram_config_vals[7] &

>  			(TXBC_NDTB_MASK >> TXBC_NDTB_SHIFT);

>  

> -	dev_dbg(priv->device,

> -		"mram_base %p sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",

> -		priv->mram_base,

> +	dev_dbg(priv->dev,

> +		"sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",

>  		priv->mcfg[MRAM_SIDF].off, priv->mcfg[MRAM_SIDF].num,

>  		priv->mcfg[MRAM_XIDF].off, priv->mcfg[MRAM_XIDF].num,

>  		priv->mcfg[MRAM_RXF0].off, priv->mcfg[MRAM_RXF0].num,

> @@ -1566,63 +1658,55 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,

>  		priv->mcfg[MRAM_RXB].off, priv->mcfg[MRAM_RXB].num,

>  		priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,

>  		priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);

> -

> -	m_can_init_ram(priv);

>  }

>  

> -static int m_can_plat_probe(struct platform_device *pdev)

> +void m_can_init_ram(struct m_can_priv *priv)

>  {

> -	struct net_device *dev;

> -	struct m_can_priv *priv;

> -	struct resource *res;

> -	void __iomem *addr;

> -	void __iomem *mram_addr;

> -	struct clk *hclk, *cclk;

> -	int irq, ret;

> -	struct device_node *np;

> -	u32 mram_config_vals[MRAM_CFG_LEN];

> -	u32 tx_fifo_size;

> -

> -	np = pdev->dev.of_node;

> +	int end, i, start;

>  

> -	hclk = devm_clk_get(&pdev->dev, "hclk");

> -	cclk = devm_clk_get(&pdev->dev, "cclk");

> +	/* initialize the entire Message RAM in use to avoid possible

> +	 * ECC/parity checksum errors when reading an uninitialized buffer

> +	 */

> +	start = priv->mcfg[MRAM_SIDF].off;

> +	end = priv->mcfg[MRAM_TXB].off +

> +		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;

>  

> -	if (IS_ERR(hclk) || IS_ERR(cclk)) {

> -		dev_err(&pdev->dev, "no clock found\n");

> -		ret = -ENODEV;

> -		goto failed_ret;

> -	}

> +	for (i = start; i < end; i += 4)

> +		m_can_fifo_write_no_off(priv, i, 0x0);

> +}

> +EXPORT_SYMBOL_GPL(m_can_init_ram);

>  

> -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");

> -	addr = devm_ioremap_resource(&pdev->dev, res);

> -	irq = platform_get_irq_byname(pdev, "int0");

> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev)

> +{

> +	int ret = 0;

>  

> -	if (IS_ERR(addr) || irq < 0) {

> -		ret = -EINVAL;

> -		goto failed_ret;

> -	}

> +	m_can_dev->hclk = devm_clk_get(m_can_dev->dev, "hclk");

> +	m_can_dev->cclk = devm_clk_get(m_can_dev->dev, "cclk");

>  

> -	/* message ram could be shared */

> -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");

> -	if (!res) {

> +	if (IS_ERR(m_can_dev->cclk)) {

> +		dev_err(m_can_dev->dev, "no clock found\n");

>  		ret = -ENODEV;

> -		goto failed_ret;

>  	}

>  

> -	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));

> -	if (!mram_addr) {

> -		ret = -ENOMEM;

> -		goto failed_ret;

> -	}

> +	return ret;

> +}

> +EXPORT_SYMBOL_GPL(m_can_class_get_clocks);

>  

> -	/* get message ram configuration */

> -	ret = of_property_read_u32_array(np, "bosch,mram-cfg",

> -					 mram_config_vals,

> -					 sizeof(mram_config_vals) / 4);

> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev)

> +{

> +	struct m_can_priv *class_dev = NULL;

> +	u32 mram_config_vals[MRAM_CFG_LEN];

> +	struct net_device *net_dev;

> +	u32 tx_fifo_size;

> +	int ret;

> +

> +	ret = fwnode_property_read_u32_array(dev_fwnode(dev),

> +					     "bosch,mram-cfg",

> +					     mram_config_vals,

> +					     sizeof(mram_config_vals) / 4);

>  	if (ret) {

> -		dev_err(&pdev->dev, "Could not get Message RAM configuration.");

> -		goto failed_ret;

> +		dev_err(dev, "Could not get Message RAM configuration.");

> +		goto out;

>  	}

>  

>  	/* Get TX FIFO size

> @@ -1631,66 +1715,74 @@ static int m_can_plat_probe(struct platform_device *pdev)

>  	tx_fifo_size = mram_config_vals[7];

>  

>  	/* allocate the m_can device */

> -	dev = alloc_candev(sizeof(*priv), tx_fifo_size);

> -	if (!dev) {

> -		ret = -ENOMEM;

> -		goto failed_ret;

> +	net_dev = alloc_candev(sizeof(*class_dev), tx_fifo_size);

> +	if (!net_dev) {

> +		dev_err(dev, "Failed to allocate CAN device");

> +		goto out;

> +	}

> +

> +	class_dev = netdev_priv(net_dev);

> +	if (!class_dev) {

> +		dev_err(dev, "Failed to init netdev private");

> +		goto out;

>  	}

>  

> -	priv = netdev_priv(dev);

> -	dev->irq = irq;

> -	priv->device = &pdev->dev;

> -	priv->hclk = hclk;

> -	priv->cclk = cclk;

> -	priv->can.clock.freq = clk_get_rate(cclk);

> -	priv->mram_base = mram_addr;

> +	class_dev->net = net_dev;

> +	class_dev->dev = dev;

> +	SET_NETDEV_DEV(net_dev, dev);

>  

> -	platform_set_drvdata(pdev, dev);

> -	SET_NETDEV_DEV(dev, &pdev->dev);

> +	m_can_of_parse_mram(class_dev, mram_config_vals);

> +out:

> +	return class_dev;

> +}

> +EXPORT_SYMBOL_GPL(m_can_class_allocate_dev);

>  

> -	/* Enable clocks. Necessary to read Core Release in order to determine

> -	 * M_CAN version

> -	 */

> -	pm_runtime_enable(&pdev->dev);

> -	ret = m_can_clk_start(priv);

> -	if (ret)

> -		goto pm_runtime_fail;

> +int m_can_class_register(struct m_can_priv *m_can_dev)

> +{

> +	int ret;

> +

> +	if (m_can_dev->pm_clock_support) {

> +		pm_runtime_enable(m_can_dev->dev);

> +		ret = m_can_clk_start(m_can_dev);

> +		if (ret)

> +			goto pm_runtime_fail;

> +	}

>  

> -	ret = m_can_dev_setup(pdev, dev, addr);

> +	ret = m_can_dev_setup(m_can_dev);

>  	if (ret)

>  		goto clk_disable;

>  

> -	ret = register_m_can_dev(dev);

> +	ret = register_m_can_dev(m_can_dev->net);

>  	if (ret) {

> -		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",

> -			KBUILD_MODNAME, ret);

> +		dev_err(m_can_dev->dev, "registering %s failed (err=%d)\n",

> +			m_can_dev->net->name, ret);

>  		goto clk_disable;

>  	}

>  

> -	m_can_of_parse_mram(priv, mram_config_vals);

> +	devm_can_led_init(m_can_dev->net);

>  

> -	devm_can_led_init(dev);

> +	of_can_transceiver(m_can_dev->net);

>  

> -	of_can_transceiver(dev);

> -

> -	dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",

> -		 KBUILD_MODNAME, dev->irq, priv->version);

> +	dev_info(m_can_dev->dev, "%s device registered (irq=%d, version=%d)\n",

> +		 KBUILD_MODNAME, m_can_dev->net->irq, m_can_dev->version);

>  

>  	/* Probe finished

>  	 * Stop clocks. They will be reactivated once the M_CAN device is opened

>  	 */

>  clk_disable:

> -	m_can_clk_stop(priv);

> +	m_can_clk_stop(m_can_dev);

>  pm_runtime_fail:

>  	if (ret) {

> -		pm_runtime_disable(&pdev->dev);

> -		free_candev(dev);

> +		if (m_can_dev->pm_clock_support)

> +			pm_runtime_disable(m_can_dev->dev);

> +		free_candev(m_can_dev->net);

>  	}

> -failed_ret:

> +

>  	return ret;

>  }

> +EXPORT_SYMBOL_GPL(m_can_class_register);

>  

> -static __maybe_unused int m_can_suspend(struct device *dev)

> +int m_can_class_suspend(struct device *dev)

>  {

>  	struct net_device *ndev = dev_get_drvdata(dev);

>  	struct m_can_priv *priv = netdev_priv(ndev);

> @@ -1708,8 +1800,9 @@ static __maybe_unused int m_can_suspend(struct device *dev)

>  

>  	return 0;

>  }

> +EXPORT_SYMBOL_GPL(m_can_class_suspend);

>  

> -static __maybe_unused int m_can_resume(struct device *dev)

> +int m_can_class_resume(struct device *dev)

>  {

>  	struct net_device *ndev = dev_get_drvdata(dev);

>  	struct m_can_priv *priv = netdev_priv(ndev);

> @@ -1733,79 +1826,19 @@ static __maybe_unused int m_can_resume(struct device *dev)

>  

>  	return 0;

>  }

> +EXPORT_SYMBOL_GPL(m_can_class_resume);

>  

> -static void unregister_m_can_dev(struct net_device *dev)

> -{

> -	unregister_candev(dev);

> -}

> -

> -static int m_can_plat_remove(struct platform_device *pdev)

> -{

> -	struct net_device *dev = platform_get_drvdata(pdev);

> -

> -	unregister_m_can_dev(dev);

> -

> -	pm_runtime_disable(&pdev->dev);

> -

> -	platform_set_drvdata(pdev, NULL);

> -

> -	free_candev(dev);

> -

> -	return 0;

> -}

> -

> -static int __maybe_unused m_can_runtime_suspend(struct device *dev)

> +void m_can_class_unregister(struct m_can_priv *m_can_dev)

>  {

> -	struct net_device *ndev = dev_get_drvdata(dev);

> -	struct m_can_priv *priv = netdev_priv(ndev);

> +	unregister_candev(m_can_dev->net);

>  

> -	clk_disable_unprepare(priv->cclk);

> -	clk_disable_unprepare(priv->hclk);

> +	m_can_clk_stop(m_can_dev);

>  

> -	return 0;

> +	free_candev(m_can_dev->net);

>  }

> -

> -static int __maybe_unused m_can_runtime_resume(struct device *dev)

> -{

> -	struct net_device *ndev = dev_get_drvdata(dev);

> -	struct m_can_priv *priv = netdev_priv(ndev);

> -	int err;

> -

> -	err = clk_prepare_enable(priv->hclk);

> -	if (err)

> -		return err;

> -

> -	err = clk_prepare_enable(priv->cclk);

> -	if (err)

> -		clk_disable_unprepare(priv->hclk);

> -

> -	return err;

> -}

> -

> -static const struct dev_pm_ops m_can_pmops = {

> -	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,

> -			   m_can_runtime_resume, NULL)

> -	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)

> -};

> -

> -static const struct of_device_id m_can_of_table[] = {

> -	{ .compatible = "bosch,m_can", .data = NULL },

> -	{ /* sentinel */ },

> -};

> -MODULE_DEVICE_TABLE(of, m_can_of_table);

> -

> -static struct platform_driver m_can_plat_driver = {

> -	.driver = {

> -		.name = KBUILD_MODNAME,

> -		.of_match_table = m_can_of_table,

> -		.pm     = &m_can_pmops,

> -	},

> -	.probe = m_can_plat_probe,

> -	.remove = m_can_plat_remove,

> -};

> -

> -module_platform_driver(m_can_plat_driver);

> +EXPORT_SYMBOL_GPL(m_can_class_unregister);

>  

>  MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");

> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");

>  MODULE_LICENSE("GPL v2");

>  MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");

> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h

> new file mode 100644

> index 000000000000..b60f27dd9f33

> --- /dev/null

> +++ b/drivers/net/can/m_can/m_can.h

> @@ -0,0 +1,110 @@

> +/* SPDX-License-Identifier: GPL-2.0 */

> +/* CAN bus driver for Bosch M_CAN controller

> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/

> + */

> +

> +#ifndef _CAN_M_CAN_H_

> +#define _CAN_M_CAN_H_

> +

> +#include <linux/can/core.h>

> +#include <linux/can/led.h>

> +#include <linux/completion.h>

> +#include <linux/device.h>

> +#include <linux/dma-mapping.h>

> +#include <linux/freezer.h>

> +#include <linux/slab.h>

> +#include <linux/uaccess.h>

> +#include <linux/clk.h>

> +#include <linux/delay.h>

> +#include <linux/interrupt.h>

> +#include <linux/io.h>

> +#include <linux/kernel.h>

> +#include <linux/module.h>

> +#include <linux/netdevice.h>

> +#include <linux/of.h>

> +#include <linux/of_device.h>

> +#include <linux/pm_runtime.h>

> +#include <linux/iopoll.h>

> +#include <linux/can/dev.h>

> +#include <linux/pinctrl/consumer.h>

> +

> +/* m_can lec values */

> +enum m_can_lec_type {

> +	LEC_NO_ERROR = 0,

> +	LEC_STUFF_ERROR,

> +	LEC_FORM_ERROR,

> +	LEC_ACK_ERROR,

> +	LEC_BIT1_ERROR,

> +	LEC_BIT0_ERROR,

> +	LEC_CRC_ERROR,

> +	LEC_UNUSED,

> +};

> +

> +enum m_can_mram_cfg {

> +	MRAM_SIDF = 0,

> +	MRAM_XIDF,

> +	MRAM_RXF0,

> +	MRAM_RXF1,

> +	MRAM_RXB,

> +	MRAM_TXE,

> +	MRAM_TXB,

> +	MRAM_CFG_NUM,

> +};

> +

> +/* address offset and element number for each FIFO/Buffer in the Message RAM */

> +struct mram_cfg {

> +	u16 off;

> +	u8  num;

> +};

> +

> +struct m_can_priv;

> +struct m_can_ops {

> +	/* Device specific call backs */

> +	int (*clear_interrupts)(struct m_can_priv *m_can_class);

> +	u32 (*read_reg)(struct m_can_priv *m_can_class, int reg);

> +	int (*write_reg)(struct m_can_priv *m_can_class, int reg, int val);

> +	u32 (*read_fifo)(struct m_can_priv *m_can_class, int addr_offset);

> +	int (*write_fifo)(struct m_can_priv *m_can_class, int addr_offset,

> +			  int val);

> +	int (*init)(struct m_can_priv *m_can_class);

> +};

> +

> +struct m_can_priv {

> +	struct can_priv can;

> +	struct napi_struct napi;

> +	struct net_device *net;

> +	struct device *dev;

> +	struct clk *hclk;

> +	struct clk *cclk;

> +

> +	struct workqueue_struct *tx_wq;

> +	struct work_struct tx_work;

> +	struct sk_buff *tx_skb;

> +

> +	struct can_bittiming_const *bit_timing;

> +	struct can_bittiming_const *data_timing;

> +

> +	struct m_can_ops *ops;

> +

> +	void *device_data;

> +

> +	int version;

> +	int freq;

> +	u32 irqstatus;

> +

> +	int pm_clock_support;

> +	int is_peripherial;

> +

> +	struct mram_cfg mcfg[MRAM_CFG_NUM];

> +};

> +

> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev);

> +int m_can_class_register(struct m_can_priv *m_can_dev);

> +void m_can_class_unregister(struct m_can_priv *m_can_dev);

> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev);

> +void m_can_init_ram(struct m_can_priv *priv);

> +void m_can_config_endisable(struct m_can_priv *priv, bool enable);

> +

> +int m_can_class_suspend(struct device *dev);

> +int m_can_class_resume(struct device *dev);

> +#endif	/* _CAN_M_H_ */

> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c

> new file mode 100644

> index 000000000000..b02d49f9ee4c

> --- /dev/null

> +++ b/drivers/net/can/m_can/m_can_platform.c

> @@ -0,0 +1,202 @@

> +// SPDX-License-Identifier: GPL-2.0

> +// IOMapped CAN bus driver for Bosch M_CAN controller

> +// Copyright (C) 2014 Freescale Semiconductor, Inc.

> +//	Dong Aisheng <b29396@freescale.com>

> +//

> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/

> +

> +#include <linux/platform_device.h>

> +

> +#include "m_can.h"

> +

> +struct m_can_plat_priv {

> +	void __iomem *base;

> +	void __iomem *mram_base;

> +};

> +

> +static u32 iomap_read_reg(struct m_can_priv *cdev, int reg)

> +{

> +	struct m_can_plat_priv *priv =

> +			(struct m_can_plat_priv *)cdev->device_data;

> +

> +	return readl(priv->base + reg);

> +}

> +

> +static u32 iomap_read_fifo(struct m_can_priv *cdev, int offset)

> +{

> +	struct m_can_plat_priv *priv =

> +			(struct m_can_plat_priv *)cdev->device_data;

> +

> +	return readl(priv->mram_base + offset);

> +}

> +

> +static int iomap_write_reg(struct m_can_priv *cdev, int reg, int val)

> +{

> +	struct m_can_plat_priv *priv =

> +			(struct m_can_plat_priv *)cdev->device_data;

> +

> +	writel(val, priv->base + reg);

> +

> +	return 0;

> +}

> +

> +static int iomap_write_fifo(struct m_can_priv *cdev, int offset, int val)

> +{

> +	struct m_can_plat_priv *priv =

> +			(struct m_can_plat_priv *)cdev->device_data;

> +

> +	writel(val, priv->mram_base + offset);

> +

> +	return 0;

> +}

> +

> +static struct m_can_ops m_can_plat_ops = {

> +	.read_reg = iomap_read_reg,

> +	.write_reg = iomap_write_reg,

> +	.write_fifo = iomap_write_fifo,

> +	.read_fifo = iomap_read_fifo,

> +};

> +

> +static int m_can_plat_probe(struct platform_device *pdev)

> +{

> +	struct m_can_priv *mcan_class;

> +	struct m_can_plat_priv *priv;

> +	struct resource *res;

> +	void __iomem *addr;

> +	void __iomem *mram_addr;

> +	int irq, ret = 0;

> +

> +	mcan_class = m_can_class_allocate_dev(&pdev->dev);

> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);

> +	if (!priv)

> +		return -ENOMEM;

> +

> +	mcan_class->device_data = priv;

> +

> +	m_can_class_get_clocks(mcan_class);

> +

> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");

> +	addr = devm_ioremap_resource(&pdev->dev, res);

> +	irq = platform_get_irq_byname(pdev, "int0");

> +	if (IS_ERR(addr) || irq < 0) {

> +		ret = -EINVAL;

> +		goto failed_ret;

> +	}

> +

> +	/* message ram could be shared */

> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");

> +	if (!res) {

> +		ret = -ENODEV;

> +		goto failed_ret;

> +	}

> +

> +	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));

> +	if (!mram_addr) {

> +		ret = -ENOMEM;

> +		goto failed_ret;

> +	}

> +

> +	priv->base = addr;

> +	priv->mram_base = mram_addr;

> +

> +	mcan_class->net->irq = irq;

> +	mcan_class->pm_clock_support = 1;

> +	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);

> +	mcan_class->dev = &pdev->dev;

> +

> +	mcan_class->ops = &m_can_plat_ops;

> +

> +	mcan_class->is_peripherial = false;

> +

> +	platform_set_drvdata(pdev, mcan_class->dev);

> +

> +	m_can_init_ram(mcan_class);

> +

> +	ret = m_can_class_register(mcan_class);

> +

> +failed_ret:

> +	return ret;

> +}

> +

> +static __maybe_unused int m_can_suspend(struct device *dev)

> +{

> +	return m_can_class_suspend(dev);

> +}

> +

> +static __maybe_unused int m_can_resume(struct device *dev)

> +{

> +	return m_can_class_resume(dev);

> +}

> +

> +static int m_can_plat_remove(struct platform_device *pdev)

> +{

> +	struct net_device *dev = platform_get_drvdata(pdev);

> +	struct m_can_priv *mcan_class = netdev_priv(dev);

> +

> +	m_can_class_unregister(mcan_class);

> +

> +	platform_set_drvdata(pdev, NULL);

> +

> +	return 0;

> +}

> +

> +static int __maybe_unused m_can_runtime_suspend(struct device *dev)

> +{

> +	struct net_device *ndev = dev_get_drvdata(dev);

> +	struct m_can_priv *mcan_class = netdev_priv(ndev);

> +

> +	m_can_class_suspend(dev);

> +

> +	clk_disable_unprepare(mcan_class->cclk);

> +	clk_disable_unprepare(mcan_class->hclk);

> +

> +	return 0;

> +}

> +

> +static int __maybe_unused m_can_runtime_resume(struct device *dev)

> +{

> +	struct net_device *ndev = dev_get_drvdata(dev);

> +	struct m_can_priv *mcan_class = netdev_priv(ndev);

> +	int err;

> +

> +	err = clk_prepare_enable(mcan_class->hclk);

> +	if (err)

> +		return err;

> +

> +	err = clk_prepare_enable(mcan_class->cclk);

> +	if (err)

> +		clk_disable_unprepare(mcan_class->hclk);

> +

> +	m_can_class_resume(dev);

> +

> +	return err;

> +}

> +

> +static const struct dev_pm_ops m_can_pmops = {

> +	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,

> +			   m_can_runtime_resume, NULL)

> +	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)

> +};

> +

> +static const struct of_device_id m_can_of_table[] = {

> +	{ .compatible = "bosch,m_can", .data = NULL },

> +	{ /* sentinel */ },

> +};

> +MODULE_DEVICE_TABLE(of, m_can_of_table);

> +

> +static struct platform_driver m_can_plat_driver = {

> +	.driver = {

> +		.name = KBUILD_MODNAME,

> +		.of_match_table = m_can_of_table,

> +		.pm     = &m_can_pmops,

> +	},

> +	.probe = m_can_plat_probe,

> +	.remove = m_can_plat_remove,

> +};

> +

> +module_platform_driver(m_can_plat_driver);

> +

> +MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");

> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");

> +MODULE_LICENSE("GPL v2");

> +MODULE_DESCRIPTION("M_CAN driver for IO Mapped Bosch controllers");


Wolfgang.
Dan Murphy March 12, 2019, 6:08 p.m. UTC | #3
Wolfgang

On 3/12/19 9:42 AM, Wolfgang Grandegger wrote:
> Hello Dan,

> 

> in the previous email you said that the tcan4x5x uses:

> 

>   Bosch M-CAN Revision 3.2.1.1

> 

> This means "cdev->version == 32", hence it's using FIFOs...

> 

> Am 12.03.19 um 13:12 schrieb Dan Murphy:

>> Create a m_can platform framework that peripherial

>> devices can register to and use common code and register sets.

>> The peripherial devices may provide read/write and configuration

>> support of the IP.

>>

>> Signed-off-by: Dan Murphy <dmurphy@ti.com>

>> ---

>>

>> v8 - Added a clean function for the tx_skb, cleaned up skb on BUS_OFF and on xmit

>> BUSY - https://lore.kernel.org/patchwork/patch/1047980/

>>

>> v7 - Fixed remaining new checkpatch issues, removed CSR setting, fixed tx hard

>> start function to return tx_busy, and renamed device callbacks - https://lore.kernel.org/patchwork/patch/1047220/

>> v6 - Squashed platform patch to this patch for bissectablity, fixed coding style

>> issues, updated Kconfig help, placed mcan reg offsets back into c file, renamed

>> priv->skb to priv->tx_skb and cleared perp interrupts at ISR start -

>> Patch 1 comments - https://lore.kernel.org/patchwork/patch/1042446/

>> Patch 2 comments - https://lore.kernel.org/patchwork/patch/1042442/

>>

>>  drivers/net/can/m_can/Kconfig          |  13 +-

>>  drivers/net/can/m_can/Makefile         |   1 +

>>  drivers/net/can/m_can/m_can.c          | 717 +++++++++++++------------

>>  drivers/net/can/m_can/m_can.h          | 110 ++++

>>  drivers/net/can/m_can/m_can_platform.c | 202 +++++++

>>  5 files changed, 699 insertions(+), 344 deletions(-)

>>  create mode 100644 drivers/net/can/m_can/m_can.h

>>  create mode 100644 drivers/net/can/m_can/m_can_platform.c

>>

>> diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig

>> index 04f20dd39007..f7119fd72df4 100644

>> --- a/drivers/net/can/m_can/Kconfig

>> +++ b/drivers/net/can/m_can/Kconfig

>> @@ -1,5 +1,14 @@

>>  config CAN_M_CAN

>> +	tristate "Bosch M_CAN support"

>> +	---help---

>> +	  Say Y here if you want support for Bosch M_CAN controller framework.

>> +	  This is common support for devices that embed the Bosch M_CAN IP.

>> +

>> +config CAN_M_CAN_PLATFORM

>> +	tristate "Bosch M_CAN support for io-mapped devices"

>>  	depends on HAS_IOMEM

>> -	tristate "Bosch M_CAN devices"

>> +	depends on CAN_M_CAN

>>  	---help---

>> -	  Say Y here if you want to support for Bosch M_CAN controller.

>> +	  Say Y here if you want support for IO Mapped Bosch M_CAN controller.

>> +	  This support is for devices that have the Bosch M_CAN controller

>> +	  IP embedded into the device and the IP is IO Mapped to the processor.

>> diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile

>> index 8bbd7f24f5be..057bbcdb3c74 100644

>> --- a/drivers/net/can/m_can/Makefile

>> +++ b/drivers/net/can/m_can/Makefile

>> @@ -3,3 +3,4 @@

>>  #

>>  

>>  obj-$(CONFIG_CAN_M_CAN) += m_can.o

>> +obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o

>> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c

>> index 9b449400376b..f2231fb02525 100644

>> --- a/drivers/net/can/m_can/m_can.c

>> +++ b/drivers/net/can/m_can/m_can.c

>> @@ -1,20 +1,14 @@

>> -/*

>> - * CAN bus driver for Bosch M_CAN controller

>> - *

>> - * Copyright (C) 2014 Freescale Semiconductor, Inc.

>> - *	Dong Aisheng <b29396@freescale.com>

>> - *

>> - * Bosch M_CAN user manual can be obtained from:

>> +// SPDX-License-Identifier: GPL-2.0

>> +// CAN bus driver for Bosch M_CAN controller

>> +// Copyright (C) 2014 Freescale Semiconductor, Inc.

>> +//      Dong Aisheng <b29396@freescale.com>

>> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/

>> +

>> +/* Bosch M_CAN user manual can be obtained from:

>>   * http://www.bosch-semiconductors.de/media/pdf_1/ipmodules_1/m_can/

>>   * mcan_users_manual_v302.pdf

>> - *

>> - * This file is licensed under the terms of the GNU General Public

>> - * License version 2. This program is licensed "as is" without any

>> - * warranty of any kind, whether express or implied.

>>   */

>>  

>> -#include <linux/clk.h>

>> -#include <linux/delay.h>

>>  #include <linux/interrupt.h>

>>  #include <linux/io.h>

>>  #include <linux/kernel.h>

>> @@ -28,11 +22,7 @@

>>  #include <linux/can/dev.h>

>>  #include <linux/pinctrl/consumer.h>

>>  

>> -/* napi related */

>> -#define M_CAN_NAPI_WEIGHT	64

>> -

>> -/* message ram configuration data length */

>> -#define MRAM_CFG_LEN	8

>> +#include "m_can.h"

>>  

>>  /* registers definition */

>>  enum m_can_reg {

>> @@ -86,28 +76,11 @@ enum m_can_reg {

>>  	M_CAN_TXEFA	= 0xf8,

>>  };

>>  

>> -/* m_can lec values */

>> -enum m_can_lec_type {

>> -	LEC_NO_ERROR = 0,

>> -	LEC_STUFF_ERROR,

>> -	LEC_FORM_ERROR,

>> -	LEC_ACK_ERROR,

>> -	LEC_BIT1_ERROR,

>> -	LEC_BIT0_ERROR,

>> -	LEC_CRC_ERROR,

>> -	LEC_UNUSED,

>> -};

>> +/* napi related */

>> +#define M_CAN_NAPI_WEIGHT	64

>>  

>> -enum m_can_mram_cfg {

>> -	MRAM_SIDF = 0,

>> -	MRAM_XIDF,

>> -	MRAM_RXF0,

>> -	MRAM_RXF1,

>> -	MRAM_RXB,

>> -	MRAM_TXE,

>> -	MRAM_TXB,

>> -	MRAM_CFG_NUM,

>> -};

>> +/* message ram configuration data length */

>> +#define MRAM_CFG_LEN	8

>>  

>>  /* Core Release Register (CREL) */

>>  #define CREL_REL_SHIFT		28

>> @@ -347,68 +320,72 @@ enum m_can_mram_cfg {

>>  #define TX_EVENT_MM_SHIFT	TX_BUF_MM_SHIFT

>>  #define TX_EVENT_MM_MASK	(0xff << TX_EVENT_MM_SHIFT)

>>  

>> -/* address offset and element number for each FIFO/Buffer in the Message RAM */

>> -struct mram_cfg {

>> -	u16 off;

>> -	u8  num;

>> -};

>> -

>> -/* m_can private data structure */

>> -struct m_can_priv {

>> -	struct can_priv can;	/* must be the first member */

>> -	struct napi_struct napi;

>> -	struct net_device *dev;

>> -	struct device *device;

>> -	struct clk *hclk;

>> -	struct clk *cclk;

>> -	void __iomem *base;

>> -	u32 irqstatus;

>> -	int version;

>> -

>> -	/* message ram configuration */

>> -	void __iomem *mram_base;

>> -	struct mram_cfg mcfg[MRAM_CFG_NUM];

>> -};

>> +static u32 m_can_read(struct m_can_priv *priv, enum m_can_reg reg)

>> +{

>> +	if (priv->ops->read_reg)

>> +		return priv->ops->read_reg(priv, reg);

>> +	else

>> +		return -EINVAL;

>> +}

>>  

>> -static inline u32 m_can_read(const struct m_can_priv *priv, enum m_can_reg reg)

>> +static int m_can_write(struct m_can_priv *priv, enum m_can_reg reg, u32 val)

>>  {

>> -	return readl(priv->base + reg);

>> +	if (priv->ops->write_reg)

>> +		return priv->ops->write_reg(priv, reg, val);

>> +	else

>> +		return -EINVAL;

>>  }

>>  

>> -static inline void m_can_write(const struct m_can_priv *priv,

>> -			       enum m_can_reg reg, u32 val)

>> +static u32 m_can_fifo_read(struct m_can_priv *priv,

>> +			   u32 fgi, unsigned int offset)

>>  {

>> -	writel(val, priv->base + reg);

>> +	u32 addr_offset = priv->mcfg[MRAM_RXF0].off + fgi * RXF0_ELEMENT_SIZE +

>> +			  offset;

>> +

>> +	if (priv->ops->read_fifo)

>> +		return priv->ops->read_fifo(priv, addr_offset);

>> +	else

>> +		return -EINVAL;

>>  }

>>  

>> -static inline u32 m_can_fifo_read(const struct m_can_priv *priv,

>> -				  u32 fgi, unsigned int offset)

>> +static u32 m_can_fifo_write(struct m_can_priv *priv,

>> +			    u32 fpi, unsigned int offset, u32 val)

>>  {

>> -	return readl(priv->mram_base + priv->mcfg[MRAM_RXF0].off +

>> -		     fgi * RXF0_ELEMENT_SIZE + offset);

>> +	u32 addr_offset = priv->mcfg[MRAM_TXB].off + fpi * TXB_ELEMENT_SIZE +

>> +			  offset;

>> +

>> +	if (priv->ops->write_fifo)

>> +		return priv->ops->write_fifo(priv, addr_offset, val);

>> +	else

>> +		return -EINVAL;

>>  }

>>  

>> -static inline void m_can_fifo_write(const struct m_can_priv *priv,

>> -				    u32 fpi, unsigned int offset, u32 val)

>> +static u32 m_can_fifo_write_no_off(struct m_can_priv *priv,

>> +				   u32 fpi, u32 val)

>>  {

>> -	writel(val, priv->mram_base + priv->mcfg[MRAM_TXB].off +

>> -	       fpi * TXB_ELEMENT_SIZE + offset);

>> +	if (priv->ops->write_fifo)

>> +		return priv->ops->write_fifo(priv, fpi, val);

>> +	else

>> +		return 0;

>>  }

>>  

>> -static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,

>> -				      u32 fgi,

>> -				      u32 offset) {

>> -	return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +

>> -			fgi * TXE_ELEMENT_SIZE + offset);

>> +static u32 m_can_txe_fifo_read(struct m_can_priv *priv, u32 fgi, u32 offset)

>> +{

>> +	u32 addr_offset = priv->mcfg[MRAM_TXE].off + fgi * TXE_ELEMENT_SIZE +

>> +			  offset;

>> +

>> +	if (priv->ops->read_fifo)

>> +		return priv->ops->read_fifo(priv, addr_offset);

>> +	else

>> +		return -EINVAL;

>>  }

>>  

>> -static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)

>> +static inline bool m_can_tx_fifo_full(struct m_can_priv *priv)

>>  {

>>  		return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);

>>  }

>>  

>> -static inline void m_can_config_endisable(const struct m_can_priv *priv,

>> -					  bool enable)

>> +void m_can_config_endisable(struct m_can_priv *priv, bool enable)

>>  {

>>  	u32 cccr = m_can_read(priv, M_CAN_CCCR);

>>  	u32 timeout = 10;

>> @@ -430,7 +407,7 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,

>>  

>>  	while ((m_can_read(priv, M_CAN_CCCR) & (CCCR_INIT | CCCR_CCE)) != val) {

>>  		if (timeout == 0) {

>> -			netdev_warn(priv->dev, "Failed to init module\n");

>> +			netdev_warn(priv->net, "Failed to init module\n");

>>  			return;

>>  		}

>>  		timeout--;

>> @@ -438,17 +415,29 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,

>>  	}

>>  }

>>  

>> -static inline void m_can_enable_all_interrupts(const struct m_can_priv *priv)

>> +static inline void m_can_enable_all_interrupts(struct m_can_priv *priv)

>>  {

>>  	/* Only interrupt line 0 is used in this driver */

>>  	m_can_write(priv, M_CAN_ILE, ILE_EINT0);

>>  }

>>  

>> -static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)

>> +static inline void m_can_disable_all_interrupts(struct m_can_priv *priv)

>>  {

>>  	m_can_write(priv, M_CAN_ILE, 0x0);

>>  }

>>  

>> +static void m_can_clean(struct net_device *net)

>> +{

>> +	struct m_can_priv *priv = netdev_priv(net);

>> +

>> +	if (priv->tx_skb) {

>> +		net->stats.tx_errors++;

>> +		dev_kfree_skb(priv->tx_skb);

>> +		can_free_echo_skb(priv->net, 0);

> 

> I think this frees the skb twice!

> 


It appears so.  I will fix it up.

> Also, the index depends on "cdev->version"! If > 30, the last used index

> should be selected.

> 


OK I will need to look into that.

>> +		priv->tx_skb = NULL;

>> +	}

>> +}

>> +

>>  static void m_can_read_fifo(struct net_device *dev, u32 rxfs)

>>  {

>>  	struct net_device_stats *stats = &dev->stats;

>> @@ -633,9 +622,12 @@ static int m_can_clk_start(struct m_can_priv *priv)

>>  {

>>  	int err;

>>  

>> -	err = pm_runtime_get_sync(priv->device);

>> +	if (priv->pm_clock_support == 0)

>> +		return 0;

>> +

>> +	err = pm_runtime_get_sync(priv->dev);

>>  	if (err < 0) {

>> -		pm_runtime_put_noidle(priv->device);

>> +		pm_runtime_put_noidle(priv->dev);

>>  		return err;

>>  	}

>>  

>> @@ -644,7 +636,8 @@ static int m_can_clk_start(struct m_can_priv *priv)

>>  

>>  static void m_can_clk_stop(struct m_can_priv *priv)

>>  {

>> -	pm_runtime_put_sync(priv->device);

>> +	if (priv->pm_clock_support)

>> +		pm_runtime_put_sync(priv->dev);

>>  }

>>  

>>  static int m_can_get_berr_counter(const struct net_device *dev,

>> @@ -811,9 +804,8 @@ static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,

>>  	return work_done;

>>  }

>>  

>> -static int m_can_poll(struct napi_struct *napi, int quota)

>> +static int m_can_rx_handler(struct net_device *dev, int quota)

>>  {

>> -	struct net_device *dev = napi->dev;

>>  	struct m_can_priv *priv = netdev_priv(dev);

>>  	int work_done = 0;

>>  	u32 irqstatus, psr;

>> @@ -831,13 +823,33 @@ static int m_can_poll(struct napi_struct *napi, int quota)

>>  

>>  	if (irqstatus & IR_RF0N)

>>  		work_done += m_can_do_rx_poll(dev, (quota - work_done));

>> +end:

>> +	return work_done;

>> +}

>> +

>> +static int m_can_rx_peripherial(struct net_device *dev)

>> +{

>> +	struct m_can_priv *priv = netdev_priv(dev);

>> +

>> +	m_can_rx_handler(dev, 1);

>> +

>> +	m_can_enable_all_interrupts(priv);

>>  

>> +	return 0;

>> +}

>> +

>> +static int m_can_poll(struct napi_struct *napi, int quota)

>> +{

>> +	struct net_device *dev = napi->dev;

>> +	struct m_can_priv *priv = netdev_priv(dev);

>> +	int work_done;

>> +

>> +	work_done = m_can_rx_handler(dev, quota);

>>  	if (work_done < quota) {

>>  		napi_complete_done(napi, work_done);

>>  		m_can_enable_all_interrupts(priv);

>>  	}

>>  

>> -end:

>>  	return work_done;

>>  }

>>  

>> @@ -894,6 +906,9 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)

>>  	if (ir & IR_ALL_INT)

>>  		m_can_write(priv, M_CAN_IR, ir);

>>  

>> +	if (priv->ops->clear_interrupts)

>> +		priv->ops->clear_interrupts(priv);

>> +

>>  	/* schedule NAPI in case of

>>  	 * - rx IRQ

>>  	 * - state change IRQ

>> @@ -902,7 +917,10 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)

>>  	if ((ir & IR_RF0N) || (ir & IR_ERR_ALL_30X)) {

>>  		priv->irqstatus = ir;

>>  		m_can_disable_all_interrupts(priv);

>> -		napi_schedule(&priv->napi);

>> +		if (!priv->is_peripherial)

>> +			napi_schedule(&priv->napi);

>> +		else

>> +			m_can_rx_peripherial(dev);

>>  	}

>>  

>>  	if (priv->version == 30) {

>> @@ -1155,6 +1173,9 @@ static void m_can_chip_config(struct net_device *dev)

>>  	m_can_set_bittiming(dev);

>>  

>>  	m_can_config_endisable(priv, false);

>> +

>> +	if (priv->ops->init)

>> +		priv->ops->init(priv);

>>  }

>>  

>>  static void m_can_start(struct net_device *dev)

>> @@ -1173,6 +1194,7 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)

>>  {

>>  	switch (mode) {

>>  	case CAN_MODE_START:

>> +		m_can_clean(dev);

>>  		m_can_start(dev);

>>  		netif_wake_queue(dev);

>>  		break;

>> @@ -1188,20 +1210,17 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)

>>   * else it returns the release and step coded as:

>>   * return value = 10 * <release> + 1 * <step>

>>   */

>> -static int m_can_check_core_release(void __iomem *m_can_base)

>> +static int m_can_check_core_release(struct m_can_priv *priv)

>>  {

>>  	u32 crel_reg;

>>  	u8 rel;

>>  	u8 step;

>>  	int res;

>> -	struct m_can_priv temp_priv = {

>> -		.base = m_can_base

>> -	};

>>  

>>  	/* Read Core Release Version and split into version number

>>  	 * Example: Version 3.2.1 => rel = 3; step = 2; substep = 1;

>>  	 */

>> -	crel_reg = m_can_read(&temp_priv, M_CAN_CREL);

>> +	crel_reg = m_can_read(priv, M_CAN_CREL);

>>  	rel = (u8)((crel_reg & CREL_REL_MASK) >> CREL_REL_SHIFT);

>>  	step = (u8)((crel_reg & CREL_STEP_MASK) >> CREL_STEP_SHIFT);

>>  

>> @@ -1219,18 +1238,26 @@ static int m_can_check_core_release(void __iomem *m_can_base)

>>  /* Selectable Non ISO support only in version 3.2.x

>>   * This function checks if the bit is writable.

>>   */

>> -static bool m_can_niso_supported(const struct m_can_priv *priv)

>> +static bool m_can_niso_supported(struct m_can_priv *priv)

>>  {

>> -	u32 cccr_reg, cccr_poll;

>> -	int niso_timeout;

>> +	u32 cccr_reg, cccr_poll = 0;

>> +	int niso_timeout = -ETIMEDOUT;

>> +	int i;

>>  

>>  	m_can_config_endisable(priv, true);

>>  	cccr_reg = m_can_read(priv, M_CAN_CCCR);

>>  	cccr_reg |= CCCR_NISO;

>>  	m_can_write(priv, M_CAN_CCCR, cccr_reg);

>>  

>> -	niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,

>> -					  (cccr_poll == cccr_reg), 0, 10);

>> +	for (i = 0; i <= 10; i++) {

>> +		cccr_poll = m_can_read(priv, M_CAN_CCCR);

>> +		if (cccr_poll == cccr_reg) {

>> +			niso_timeout = 0;

>> +			break;

>> +		}

>> +

>> +		usleep_range(1, 5);

>> +	}

>>  

>>  	/* Clear NISO */

>>  	cccr_reg &= ~(CCCR_NISO);

>> @@ -1242,107 +1269,79 @@ static bool m_can_niso_supported(const struct m_can_priv *priv)

>>  	return !niso_timeout;

>>  }

>>  

>> -static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,

>> -			   void __iomem *addr)

>> +static int m_can_dev_setup(struct m_can_priv *m_can_dev)

>>  {

>> -	struct m_can_priv *priv;

>> +	struct net_device *dev = m_can_dev->net;

>>  	int m_can_version;

>>  

>> -	m_can_version = m_can_check_core_release(addr);

>> +	m_can_version = m_can_check_core_release(m_can_dev);

>>  	/* return if unsupported version */

>>  	if (!m_can_version) {

>> -		dev_err(&pdev->dev, "Unsupported version number: %2d",

>> +		dev_err(m_can_dev->dev, "Unsupported version number: %2d",

>>  			m_can_version);

>>  		return -EINVAL;

>>  	}

>>  

>> -	priv = netdev_priv(dev);

>> -	netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);

>> +	if (!m_can_dev->is_peripherial)

>> +		netif_napi_add(dev, &m_can_dev->napi,

>> +			       m_can_poll, M_CAN_NAPI_WEIGHT);

>>  

>>  	/* Shared properties of all M_CAN versions */

>> -	priv->version = m_can_version;

>> -	priv->dev = dev;

>> -	priv->base = addr;

>> -	priv->can.do_set_mode = m_can_set_mode;

>> -	priv->can.do_get_berr_counter = m_can_get_berr_counter;

>> +	m_can_dev->version = m_can_version;

>> +	m_can_dev->can.do_set_mode = m_can_set_mode;

>> +	m_can_dev->can.do_get_berr_counter = m_can_get_berr_counter;

>>  

>>  	/* Set M_CAN supported operations */

>> -	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |

>> +	m_can_dev->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |

>>  					CAN_CTRLMODE_LISTENONLY |

>>  					CAN_CTRLMODE_BERR_REPORTING |

>>  					CAN_CTRLMODE_FD;

>>  

>>  	/* Set properties depending on M_CAN version */

>> -	switch (priv->version) {

>> +	switch (m_can_dev->version) {

>>  	case 30:

>>  		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.x */

>>  		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);

>> -		priv->can.bittiming_const = &m_can_bittiming_const_30X;

>> -		priv->can.data_bittiming_const =

>> -				&m_can_data_bittiming_const_30X;

>> +		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?

>> +			m_can_dev->bit_timing : &m_can_bittiming_const_30X;

>> +

>> +		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?

>> +						m_can_dev->data_timing :

>> +						&m_can_data_bittiming_const_30X;

>>  		break;

>>  	case 31:

>>  		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */

>>  		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);

>> -		priv->can.bittiming_const = &m_can_bittiming_const_31X;

>> -		priv->can.data_bittiming_const =

>> -				&m_can_data_bittiming_const_31X;

>> +		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?

>> +			m_can_dev->bit_timing : &m_can_bittiming_const_31X;

>> +

>> +		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?

>> +						m_can_dev->data_timing :

>> +						&m_can_data_bittiming_const_31X;

>>  		break;

>>  	case 32:

>> -		priv->can.bittiming_const = &m_can_bittiming_const_31X;

>> -		priv->can.data_bittiming_const =

>> -				&m_can_data_bittiming_const_31X;

>> -		priv->can.ctrlmode_supported |= (m_can_niso_supported(priv)

>> +		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?

>> +			m_can_dev->bit_timing : &m_can_bittiming_const_31X;

>> +

>> +		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?

>> +						m_can_dev->data_timing :

>> +						&m_can_data_bittiming_const_31X;

>> +

>> +		m_can_dev->can.ctrlmode_supported |=

>> +						(m_can_niso_supported(m_can_dev)

>>  						? CAN_CTRLMODE_FD_NON_ISO

>>  						: 0);

>>  		break;

>>  	default:

>> -		dev_err(&pdev->dev, "Unsupported version number: %2d",

>> -			priv->version);

>> +		dev_err(m_can_dev->dev, "Unsupported version number: %2d",

>> +			m_can_dev->version);

>>  		return -EINVAL;

>>  	}

>>  

>> -	return 0;

>> -}

>> -

>> -static int m_can_open(struct net_device *dev)

>> -{

>> -	struct m_can_priv *priv = netdev_priv(dev);

>> -	int err;

>> -

>> -	err = m_can_clk_start(priv);

>> -	if (err)

>> -		return err;

>> -

>> -	/* open the can device */

>> -	err = open_candev(dev);

>> -	if (err) {

>> -		netdev_err(dev, "failed to open can device\n");

>> -		goto exit_disable_clks;

>> -	}

>> -

>> -	/* register interrupt handler */

>> -	err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,

>> -			  dev);

>> -	if (err < 0) {

>> -		netdev_err(dev, "failed to request interrupt\n");

>> -		goto exit_irq_fail;

>> -	}

>> -

>> -	/* start the m_can controller */

>> -	m_can_start(dev);

>> -

>> -	can_led_event(dev, CAN_LED_EVENT_OPEN);

>> -	napi_enable(&priv->napi);

>> -	netif_start_queue(dev);

>> +	if (m_can_dev->ops->init)

>> +		m_can_dev->ops->init(m_can_dev);

>>  

>>  	return 0;

>> -

>> -exit_irq_fail:

>> -	close_candev(dev);

>> -exit_disable_clks:

>> -	m_can_clk_stop(priv);

>> -	return err;

>>  }

>>  

>>  static void m_can_stop(struct net_device *dev)

>> @@ -1361,10 +1360,18 @@ static int m_can_close(struct net_device *dev)

>>  	struct m_can_priv *priv = netdev_priv(dev);

>>  

>>  	netif_stop_queue(dev);

>> -	napi_disable(&priv->napi);

>> +	if (!priv->is_peripherial)

>> +		napi_disable(&priv->napi);

>>  	m_can_stop(dev);

>>  	m_can_clk_stop(priv);

>>  	free_irq(dev->irq, dev);

>> +

>> +	if (priv->is_peripherial) {

>> +		priv->tx_skb = NULL;

>> +		destroy_workqueue(priv->tx_wq);

>> +		priv->tx_wq = NULL;

>> +	}

>> +

>>  	close_candev(dev);

>>  	can_led_event(dev, CAN_LED_EVENT_STOP);

>>  

>> @@ -1385,18 +1392,15 @@ static int m_can_next_echo_skb_occupied(struct net_device *dev, int putidx)

>>  	return !!priv->can.echo_skb[next_idx];

>>  }

>>  

>> -static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,

>> -				    struct net_device *dev)

>> +static netdev_tx_t m_can_tx_handler(struct m_can_priv *priv)

>>  {

>> -	struct m_can_priv *priv = netdev_priv(dev);

>> -	struct canfd_frame *cf = (struct canfd_frame *)skb->data;

>> +	struct canfd_frame *cf = (struct canfd_frame *)priv->tx_skb->data;

>> +	struct net_device *dev = priv->net;

>> +	struct sk_buff *skb = priv->tx_skb;

>>  	u32 id, cccr, fdflags;

>>  	int i;

>>  	int putidx;

>>  

>> -	if (can_dropped_invalid_skb(dev, skb))

>> -		return NETDEV_TX_OK;

>> -

>>  	/* Generate ID field for TX buffer Element */

>>  	/* Common to all supported M_CAN versions */

>>  	if (cf->can_id & CAN_EFF_FLAG) {

>> @@ -1492,14 +1496,117 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,

>>  		m_can_write(priv, M_CAN_TXBAR, (1 << putidx));

>>  

>>  		/* stop network queue if fifo full */

>> -			if (m_can_tx_fifo_full(priv) ||

>> -			    m_can_next_echo_skb_occupied(dev, putidx))

>> -				netif_stop_queue(dev);

>> +		if (m_can_tx_fifo_full(priv) ||

>> +		    m_can_next_echo_skb_occupied(dev, putidx))

>> +			netif_stop_queue(dev);

>> +	}

>> +

>> +	return NETDEV_TX_OK;

>> +}

>> +

>> +static void m_can_tx_work_queue(struct work_struct *ws)

>> +{

>> +	struct m_can_priv *priv = container_of(ws, struct m_can_priv,

>> +						tx_work);

>> +	netdev_tx_t ret;

>> +

>> +	ret = m_can_tx_handler(priv);

>> +	if (ret == NETDEV_TX_OK)

>> +		priv->tx_skb = NULL;

> 

> What happens to the "tx_skb" if this funtions returns with

> NETDEV_TX_BUSY? Will it be freed?


I am missing the change I put in to free this.
It must have been lost when rebasing the patch set

I will add it back and fix this up

> 

>> +}

>> +

>> +static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,

>> +				    struct net_device *dev)

>> +{

>> +	struct m_can_priv *priv = netdev_priv(dev);

>> +

>> +	if (can_dropped_invalid_skb(dev, skb))

>> +		return NETDEV_TX_OK;

>> +

>> +	if (priv->is_peripherial) {

>> +		if (priv->tx_skb) {

>> +			netdev_err(dev, "hard_xmit called while tx busy\n");

>> +			return NETDEV_TX_BUSY;

>> +		}

>> +

>> +		if (priv->can.state == CAN_STATE_BUS_OFF) {

>> +			m_can_clean(dev);

>> +		} else {

>> +			priv->tx_skb = skb;

>> +			netif_stop_queue(priv->net);

> 

> You stop the queue immediately, even if fifos are used. Is this by purpose?

> 


Good catch.  I should let the work queue handle this.  I see that < 3.0 stops the queue immedidately
but > 3.0 does not.

I don't know what version of core the hi or mcp parts are using it looks to be 3.0.
I believe thats where I pulled the stop from.

I will remove it.

>> +			queue_work(priv->tx_wq, &priv->tx_work);

>> +		}

>> +	} else {

>> +		priv->tx_skb = skb;

>> +		return m_can_tx_handler(priv);

>>  	}

>>  

>>  	return NETDEV_TX_OK;

>>  }

>>  

>> +static int m_can_open(struct net_device *dev)

>> +{

>> +	struct m_can_priv *priv = netdev_priv(dev);

>> +	int err;

>> +

>> +	err = m_can_clk_start(priv);

>> +	if (err)

>> +		return err;

>> +

>> +	/* open the can device */

>> +	err = open_candev(dev);

>> +	if (err) {

>> +		netdev_err(dev, "failed to open can device\n");

>> +		goto exit_disable_clks;

>> +	}

>> +

>> +	/* register interrupt handler */

>> +	if (priv->is_peripherial) {

>> +		priv->tx_skb = NULL;

>> +		priv->tx_wq = alloc_workqueue("mcan_wq",

>> +					      WQ_FREEZABLE | WQ_MEM_RECLAIM, 0);

>> +		if (!priv->tx_wq) {

>> +			err = -ENOMEM;

>> +			goto out_wq_fail;

>> +		}

>> +

>> +		INIT_WORK(&priv->tx_work, m_can_tx_work_queue);

>> +

>> +		err = request_threaded_irq(dev->irq, NULL, m_can_isr,

>> +					   IRQF_ONESHOT | IRQF_TRIGGER_FALLING,

>> +					   dev->name, dev);

>> +	} else {

>> +		err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,

>> +				  dev);

>> +	}

>> +

>> +	if (err < 0) {

>> +		netdev_err(dev, "failed to request interrupt\n");

>> +		goto exit_irq_fail;

>> +	}

>> +

>> +	/* start the m_can controller */

>> +	m_can_start(dev);

>> +

>> +	can_led_event(dev, CAN_LED_EVENT_OPEN);

>> +

>> +	if (!priv->is_peripherial)

>> +		napi_enable(&priv->napi);

>> +

>> +	netif_start_queue(dev);

>> +

>> +	return 0;

>> +

>> +exit_irq_fail:

>> +	if (priv->is_peripherial)

>> +		destroy_workqueue(priv->tx_wq);

>> +out_wq_fail:

>> +	close_candev(dev);

>> +exit_disable_clks:

>> +	m_can_clk_stop(priv);

>> +	return err;

>> +}

>> +

>>  static const struct net_device_ops m_can_netdev_ops = {

>>  	.ndo_open = m_can_open,

>>  	.ndo_stop = m_can_close,

>> @@ -1515,20 +1622,6 @@ static int register_m_can_dev(struct net_device *dev)

>>  	return register_candev(dev);

>>  }

>>  

>> -static void m_can_init_ram(struct m_can_priv *priv)

>> -{

>> -	int end, i, start;

>> -

>> -	/* initialize the entire Message RAM in use to avoid possible

>> -	 * ECC/parity checksum errors when reading an uninitialized buffer

>> -	 */

>> -	start = priv->mcfg[MRAM_SIDF].off;

>> -	end = priv->mcfg[MRAM_TXB].off +

>> -		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;

>> -	for (i = start; i < end; i += 4)

>> -		writel(0x0, priv->mram_base + i);

>> -}

>> -

>>  static void m_can_of_parse_mram(struct m_can_priv *priv,

>>  				const u32 *mram_config_vals)

>>  {

>> @@ -1556,9 +1649,8 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,

>>  	priv->mcfg[MRAM_TXB].num = mram_config_vals[7] &

>>  			(TXBC_NDTB_MASK >> TXBC_NDTB_SHIFT);

>>  

>> -	dev_dbg(priv->device,

>> -		"mram_base %p sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",

>> -		priv->mram_base,

>> +	dev_dbg(priv->dev,

>> +		"sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",

>>  		priv->mcfg[MRAM_SIDF].off, priv->mcfg[MRAM_SIDF].num,

>>  		priv->mcfg[MRAM_XIDF].off, priv->mcfg[MRAM_XIDF].num,

>>  		priv->mcfg[MRAM_RXF0].off, priv->mcfg[MRAM_RXF0].num,

>> @@ -1566,63 +1658,55 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,

>>  		priv->mcfg[MRAM_RXB].off, priv->mcfg[MRAM_RXB].num,

>>  		priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,

>>  		priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);

>> -

>> -	m_can_init_ram(priv);

>>  }

>>  

>> -static int m_can_plat_probe(struct platform_device *pdev)

>> +void m_can_init_ram(struct m_can_priv *priv)

>>  {

>> -	struct net_device *dev;

>> -	struct m_can_priv *priv;

>> -	struct resource *res;

>> -	void __iomem *addr;

>> -	void __iomem *mram_addr;

>> -	struct clk *hclk, *cclk;

>> -	int irq, ret;

>> -	struct device_node *np;

>> -	u32 mram_config_vals[MRAM_CFG_LEN];

>> -	u32 tx_fifo_size;

>> -

>> -	np = pdev->dev.of_node;

>> +	int end, i, start;

>>  

>> -	hclk = devm_clk_get(&pdev->dev, "hclk");

>> -	cclk = devm_clk_get(&pdev->dev, "cclk");

>> +	/* initialize the entire Message RAM in use to avoid possible

>> +	 * ECC/parity checksum errors when reading an uninitialized buffer

>> +	 */

>> +	start = priv->mcfg[MRAM_SIDF].off;

>> +	end = priv->mcfg[MRAM_TXB].off +

>> +		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;

>>  

>> -	if (IS_ERR(hclk) || IS_ERR(cclk)) {

>> -		dev_err(&pdev->dev, "no clock found\n");

>> -		ret = -ENODEV;

>> -		goto failed_ret;

>> -	}

>> +	for (i = start; i < end; i += 4)

>> +		m_can_fifo_write_no_off(priv, i, 0x0);

>> +}

>> +EXPORT_SYMBOL_GPL(m_can_init_ram);

>>  

>> -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");

>> -	addr = devm_ioremap_resource(&pdev->dev, res);

>> -	irq = platform_get_irq_byname(pdev, "int0");

>> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev)

>> +{

>> +	int ret = 0;

>>  

>> -	if (IS_ERR(addr) || irq < 0) {

>> -		ret = -EINVAL;

>> -		goto failed_ret;

>> -	}

>> +	m_can_dev->hclk = devm_clk_get(m_can_dev->dev, "hclk");

>> +	m_can_dev->cclk = devm_clk_get(m_can_dev->dev, "cclk");

>>  

>> -	/* message ram could be shared */

>> -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");

>> -	if (!res) {

>> +	if (IS_ERR(m_can_dev->cclk)) {

>> +		dev_err(m_can_dev->dev, "no clock found\n");

>>  		ret = -ENODEV;

>> -		goto failed_ret;

>>  	}

>>  

>> -	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));

>> -	if (!mram_addr) {

>> -		ret = -ENOMEM;

>> -		goto failed_ret;

>> -	}

>> +	return ret;

>> +}

>> +EXPORT_SYMBOL_GPL(m_can_class_get_clocks);

>>  

>> -	/* get message ram configuration */

>> -	ret = of_property_read_u32_array(np, "bosch,mram-cfg",

>> -					 mram_config_vals,

>> -					 sizeof(mram_config_vals) / 4);

>> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev)

>> +{

>> +	struct m_can_priv *class_dev = NULL;

>> +	u32 mram_config_vals[MRAM_CFG_LEN];

>> +	struct net_device *net_dev;

>> +	u32 tx_fifo_size;

>> +	int ret;

>> +

>> +	ret = fwnode_property_read_u32_array(dev_fwnode(dev),

>> +					     "bosch,mram-cfg",

>> +					     mram_config_vals,

>> +					     sizeof(mram_config_vals) / 4);

>>  	if (ret) {

>> -		dev_err(&pdev->dev, "Could not get Message RAM configuration.");

>> -		goto failed_ret;

>> +		dev_err(dev, "Could not get Message RAM configuration.");

>> +		goto out;

>>  	}

>>  

>>  	/* Get TX FIFO size

>> @@ -1631,66 +1715,74 @@ static int m_can_plat_probe(struct platform_device *pdev)

>>  	tx_fifo_size = mram_config_vals[7];

>>  

>>  	/* allocate the m_can device */

>> -	dev = alloc_candev(sizeof(*priv), tx_fifo_size);

>> -	if (!dev) {

>> -		ret = -ENOMEM;

>> -		goto failed_ret;

>> +	net_dev = alloc_candev(sizeof(*class_dev), tx_fifo_size);

>> +	if (!net_dev) {

>> +		dev_err(dev, "Failed to allocate CAN device");

>> +		goto out;

>> +	}

>> +

>> +	class_dev = netdev_priv(net_dev);

>> +	if (!class_dev) {

>> +		dev_err(dev, "Failed to init netdev private");

>> +		goto out;

>>  	}

>>  

>> -	priv = netdev_priv(dev);

>> -	dev->irq = irq;

>> -	priv->device = &pdev->dev;

>> -	priv->hclk = hclk;

>> -	priv->cclk = cclk;

>> -	priv->can.clock.freq = clk_get_rate(cclk);

>> -	priv->mram_base = mram_addr;

>> +	class_dev->net = net_dev;

>> +	class_dev->dev = dev;

>> +	SET_NETDEV_DEV(net_dev, dev);

>>  

>> -	platform_set_drvdata(pdev, dev);

>> -	SET_NETDEV_DEV(dev, &pdev->dev);

>> +	m_can_of_parse_mram(class_dev, mram_config_vals);

>> +out:

>> +	return class_dev;

>> +}

>> +EXPORT_SYMBOL_GPL(m_can_class_allocate_dev);

>>  

>> -	/* Enable clocks. Necessary to read Core Release in order to determine

>> -	 * M_CAN version

>> -	 */

>> -	pm_runtime_enable(&pdev->dev);

>> -	ret = m_can_clk_start(priv);

>> -	if (ret)

>> -		goto pm_runtime_fail;

>> +int m_can_class_register(struct m_can_priv *m_can_dev)

>> +{

>> +	int ret;

>> +

>> +	if (m_can_dev->pm_clock_support) {

>> +		pm_runtime_enable(m_can_dev->dev);

>> +		ret = m_can_clk_start(m_can_dev);

>> +		if (ret)

>> +			goto pm_runtime_fail;

>> +	}

>>  

>> -	ret = m_can_dev_setup(pdev, dev, addr);

>> +	ret = m_can_dev_setup(m_can_dev);

>>  	if (ret)

>>  		goto clk_disable;

>>  

>> -	ret = register_m_can_dev(dev);

>> +	ret = register_m_can_dev(m_can_dev->net);

>>  	if (ret) {

>> -		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",

>> -			KBUILD_MODNAME, ret);

>> +		dev_err(m_can_dev->dev, "registering %s failed (err=%d)\n",

>> +			m_can_dev->net->name, ret);

>>  		goto clk_disable;

>>  	}

>>  

>> -	m_can_of_parse_mram(priv, mram_config_vals);

>> +	devm_can_led_init(m_can_dev->net);

>>  

>> -	devm_can_led_init(dev);

>> +	of_can_transceiver(m_can_dev->net);

>>  

>> -	of_can_transceiver(dev);

>> -

>> -	dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",

>> -		 KBUILD_MODNAME, dev->irq, priv->version);

>> +	dev_info(m_can_dev->dev, "%s device registered (irq=%d, version=%d)\n",

>> +		 KBUILD_MODNAME, m_can_dev->net->irq, m_can_dev->version);

>>  

>>  	/* Probe finished

>>  	 * Stop clocks. They will be reactivated once the M_CAN device is opened

>>  	 */

>>  clk_disable:

>> -	m_can_clk_stop(priv);

>> +	m_can_clk_stop(m_can_dev);

>>  pm_runtime_fail:

>>  	if (ret) {

>> -		pm_runtime_disable(&pdev->dev);

>> -		free_candev(dev);

>> +		if (m_can_dev->pm_clock_support)

>> +			pm_runtime_disable(m_can_dev->dev);

>> +		free_candev(m_can_dev->net);

>>  	}

>> -failed_ret:

>> +

>>  	return ret;

>>  }

>> +EXPORT_SYMBOL_GPL(m_can_class_register);

>>  

>> -static __maybe_unused int m_can_suspend(struct device *dev)

>> +int m_can_class_suspend(struct device *dev)

>>  {

>>  	struct net_device *ndev = dev_get_drvdata(dev);

>>  	struct m_can_priv *priv = netdev_priv(ndev);

>> @@ -1708,8 +1800,9 @@ static __maybe_unused int m_can_suspend(struct device *dev)

>>  

>>  	return 0;

>>  }

>> +EXPORT_SYMBOL_GPL(m_can_class_suspend);

>>  

>> -static __maybe_unused int m_can_resume(struct device *dev)

>> +int m_can_class_resume(struct device *dev)

>>  {

>>  	struct net_device *ndev = dev_get_drvdata(dev);

>>  	struct m_can_priv *priv = netdev_priv(ndev);

>> @@ -1733,79 +1826,19 @@ static __maybe_unused int m_can_resume(struct device *dev)

>>  

>>  	return 0;

>>  }

>> +EXPORT_SYMBOL_GPL(m_can_class_resume);

>>  

>> -static void unregister_m_can_dev(struct net_device *dev)

>> -{

>> -	unregister_candev(dev);

>> -}

>> -

>> -static int m_can_plat_remove(struct platform_device *pdev)

>> -{

>> -	struct net_device *dev = platform_get_drvdata(pdev);

>> -

>> -	unregister_m_can_dev(dev);

>> -

>> -	pm_runtime_disable(&pdev->dev);

>> -

>> -	platform_set_drvdata(pdev, NULL);

>> -

>> -	free_candev(dev);

>> -

>> -	return 0;

>> -}

>> -

>> -static int __maybe_unused m_can_runtime_suspend(struct device *dev)

>> +void m_can_class_unregister(struct m_can_priv *m_can_dev)

>>  {

>> -	struct net_device *ndev = dev_get_drvdata(dev);

>> -	struct m_can_priv *priv = netdev_priv(ndev);

>> +	unregister_candev(m_can_dev->net);

>>  

>> -	clk_disable_unprepare(priv->cclk);

>> -	clk_disable_unprepare(priv->hclk);

>> +	m_can_clk_stop(m_can_dev);

>>  

>> -	return 0;

>> +	free_candev(m_can_dev->net);

>>  }

>> -

>> -static int __maybe_unused m_can_runtime_resume(struct device *dev)

>> -{

>> -	struct net_device *ndev = dev_get_drvdata(dev);

>> -	struct m_can_priv *priv = netdev_priv(ndev);

>> -	int err;

>> -

>> -	err = clk_prepare_enable(priv->hclk);

>> -	if (err)

>> -		return err;

>> -

>> -	err = clk_prepare_enable(priv->cclk);

>> -	if (err)

>> -		clk_disable_unprepare(priv->hclk);

>> -

>> -	return err;

>> -}

>> -

>> -static const struct dev_pm_ops m_can_pmops = {

>> -	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,

>> -			   m_can_runtime_resume, NULL)

>> -	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)

>> -};

>> -

>> -static const struct of_device_id m_can_of_table[] = {

>> -	{ .compatible = "bosch,m_can", .data = NULL },

>> -	{ /* sentinel */ },

>> -};

>> -MODULE_DEVICE_TABLE(of, m_can_of_table);

>> -

>> -static struct platform_driver m_can_plat_driver = {

>> -	.driver = {

>> -		.name = KBUILD_MODNAME,

>> -		.of_match_table = m_can_of_table,

>> -		.pm     = &m_can_pmops,

>> -	},

>> -	.probe = m_can_plat_probe,

>> -	.remove = m_can_plat_remove,

>> -};

>> -

>> -module_platform_driver(m_can_plat_driver);

>> +EXPORT_SYMBOL_GPL(m_can_class_unregister);

>>  

>>  MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");

>> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");

>>  MODULE_LICENSE("GPL v2");

>>  MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");

>> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h

>> new file mode 100644

>> index 000000000000..b60f27dd9f33

>> --- /dev/null

>> +++ b/drivers/net/can/m_can/m_can.h

>> @@ -0,0 +1,110 @@

>> +/* SPDX-License-Identifier: GPL-2.0 */

>> +/* CAN bus driver for Bosch M_CAN controller

>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/

>> + */

>> +

>> +#ifndef _CAN_M_CAN_H_

>> +#define _CAN_M_CAN_H_

>> +

>> +#include <linux/can/core.h>

>> +#include <linux/can/led.h>

>> +#include <linux/completion.h>

>> +#include <linux/device.h>

>> +#include <linux/dma-mapping.h>

>> +#include <linux/freezer.h>

>> +#include <linux/slab.h>

>> +#include <linux/uaccess.h>

>> +#include <linux/clk.h>

>> +#include <linux/delay.h>

>> +#include <linux/interrupt.h>

>> +#include <linux/io.h>

>> +#include <linux/kernel.h>

>> +#include <linux/module.h>

>> +#include <linux/netdevice.h>

>> +#include <linux/of.h>

>> +#include <linux/of_device.h>

>> +#include <linux/pm_runtime.h>

>> +#include <linux/iopoll.h>

>> +#include <linux/can/dev.h>

>> +#include <linux/pinctrl/consumer.h>

>> +

>> +/* m_can lec values */

>> +enum m_can_lec_type {

>> +	LEC_NO_ERROR = 0,

>> +	LEC_STUFF_ERROR,

>> +	LEC_FORM_ERROR,

>> +	LEC_ACK_ERROR,

>> +	LEC_BIT1_ERROR,

>> +	LEC_BIT0_ERROR,

>> +	LEC_CRC_ERROR,

>> +	LEC_UNUSED,

>> +};

>> +

>> +enum m_can_mram_cfg {

>> +	MRAM_SIDF = 0,

>> +	MRAM_XIDF,

>> +	MRAM_RXF0,

>> +	MRAM_RXF1,

>> +	MRAM_RXB,

>> +	MRAM_TXE,

>> +	MRAM_TXB,

>> +	MRAM_CFG_NUM,

>> +};

>> +

>> +/* address offset and element number for each FIFO/Buffer in the Message RAM */

>> +struct mram_cfg {

>> +	u16 off;

>> +	u8  num;

>> +};

>> +

>> +struct m_can_priv;

>> +struct m_can_ops {

>> +	/* Device specific call backs */

>> +	int (*clear_interrupts)(struct m_can_priv *m_can_class);

>> +	u32 (*read_reg)(struct m_can_priv *m_can_class, int reg);

>> +	int (*write_reg)(struct m_can_priv *m_can_class, int reg, int val);

>> +	u32 (*read_fifo)(struct m_can_priv *m_can_class, int addr_offset);

>> +	int (*write_fifo)(struct m_can_priv *m_can_class, int addr_offset,

>> +			  int val);

>> +	int (*init)(struct m_can_priv *m_can_class);

>> +};

>> +

>> +struct m_can_priv {

>> +	struct can_priv can;

>> +	struct napi_struct napi;

>> +	struct net_device *net;

>> +	struct device *dev;

>> +	struct clk *hclk;

>> +	struct clk *cclk;

>> +

>> +	struct workqueue_struct *tx_wq;

>> +	struct work_struct tx_work;

>> +	struct sk_buff *tx_skb;

>> +

>> +	struct can_bittiming_const *bit_timing;

>> +	struct can_bittiming_const *data_timing;

>> +

>> +	struct m_can_ops *ops;

>> +

>> +	void *device_data;

>> +

>> +	int version;

>> +	int freq;

>> +	u32 irqstatus;

>> +

>> +	int pm_clock_support;

>> +	int is_peripherial;

>> +

>> +	struct mram_cfg mcfg[MRAM_CFG_NUM];

>> +};

>> +

>> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev);

>> +int m_can_class_register(struct m_can_priv *m_can_dev);

>> +void m_can_class_unregister(struct m_can_priv *m_can_dev);

>> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev);

>> +void m_can_init_ram(struct m_can_priv *priv);

>> +void m_can_config_endisable(struct m_can_priv *priv, bool enable);

>> +

>> +int m_can_class_suspend(struct device *dev);

>> +int m_can_class_resume(struct device *dev);

>> +#endif	/* _CAN_M_H_ */

>> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c

>> new file mode 100644

>> index 000000000000..b02d49f9ee4c

>> --- /dev/null

>> +++ b/drivers/net/can/m_can/m_can_platform.c

>> @@ -0,0 +1,202 @@

>> +// SPDX-License-Identifier: GPL-2.0

>> +// IOMapped CAN bus driver for Bosch M_CAN controller

>> +// Copyright (C) 2014 Freescale Semiconductor, Inc.

>> +//	Dong Aisheng <b29396@freescale.com>

>> +//

>> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/

>> +

>> +#include <linux/platform_device.h>

>> +

>> +#include "m_can.h"

>> +

>> +struct m_can_plat_priv {

>> +	void __iomem *base;

>> +	void __iomem *mram_base;

>> +};

>> +

>> +static u32 iomap_read_reg(struct m_can_priv *cdev, int reg)

>> +{

>> +	struct m_can_plat_priv *priv =

>> +			(struct m_can_plat_priv *)cdev->device_data;

>> +

>> +	return readl(priv->base + reg);

>> +}

>> +

>> +static u32 iomap_read_fifo(struct m_can_priv *cdev, int offset)

>> +{

>> +	struct m_can_plat_priv *priv =

>> +			(struct m_can_plat_priv *)cdev->device_data;

>> +

>> +	return readl(priv->mram_base + offset);

>> +}

>> +

>> +static int iomap_write_reg(struct m_can_priv *cdev, int reg, int val)

>> +{

>> +	struct m_can_plat_priv *priv =

>> +			(struct m_can_plat_priv *)cdev->device_data;

>> +

>> +	writel(val, priv->base + reg);

>> +

>> +	return 0;

>> +}

>> +

>> +static int iomap_write_fifo(struct m_can_priv *cdev, int offset, int val)

>> +{

>> +	struct m_can_plat_priv *priv =

>> +			(struct m_can_plat_priv *)cdev->device_data;

>> +

>> +	writel(val, priv->mram_base + offset);

>> +

>> +	return 0;

>> +}

>> +

>> +static struct m_can_ops m_can_plat_ops = {

>> +	.read_reg = iomap_read_reg,

>> +	.write_reg = iomap_write_reg,

>> +	.write_fifo = iomap_write_fifo,

>> +	.read_fifo = iomap_read_fifo,

>> +};

>> +

>> +static int m_can_plat_probe(struct platform_device *pdev)

>> +{

>> +	struct m_can_priv *mcan_class;

>> +	struct m_can_plat_priv *priv;

>> +	struct resource *res;

>> +	void __iomem *addr;

>> +	void __iomem *mram_addr;

>> +	int irq, ret = 0;

>> +

>> +	mcan_class = m_can_class_allocate_dev(&pdev->dev);

>> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);

>> +	if (!priv)

>> +		return -ENOMEM;

>> +

>> +	mcan_class->device_data = priv;

>> +

>> +	m_can_class_get_clocks(mcan_class);

>> +

>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");

>> +	addr = devm_ioremap_resource(&pdev->dev, res);

>> +	irq = platform_get_irq_byname(pdev, "int0");

>> +	if (IS_ERR(addr) || irq < 0) {

>> +		ret = -EINVAL;

>> +		goto failed_ret;

>> +	}

>> +

>> +	/* message ram could be shared */

>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");

>> +	if (!res) {

>> +		ret = -ENODEV;

>> +		goto failed_ret;

>> +	}

>> +

>> +	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));

>> +	if (!mram_addr) {

>> +		ret = -ENOMEM;

>> +		goto failed_ret;

>> +	}

>> +

>> +	priv->base = addr;

>> +	priv->mram_base = mram_addr;

>> +

>> +	mcan_class->net->irq = irq;

>> +	mcan_class->pm_clock_support = 1;

>> +	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);

>> +	mcan_class->dev = &pdev->dev;

>> +

>> +	mcan_class->ops = &m_can_plat_ops;

>> +

>> +	mcan_class->is_peripherial = false;

>> +

>> +	platform_set_drvdata(pdev, mcan_class->dev);

>> +

>> +	m_can_init_ram(mcan_class);

>> +

>> +	ret = m_can_class_register(mcan_class);

>> +

>> +failed_ret:

>> +	return ret;

>> +}

>> +

>> +static __maybe_unused int m_can_suspend(struct device *dev)

>> +{

>> +	return m_can_class_suspend(dev);

>> +}

>> +

>> +static __maybe_unused int m_can_resume(struct device *dev)

>> +{

>> +	return m_can_class_resume(dev);

>> +}

>> +

>> +static int m_can_plat_remove(struct platform_device *pdev)

>> +{

>> +	struct net_device *dev = platform_get_drvdata(pdev);

>> +	struct m_can_priv *mcan_class = netdev_priv(dev);

>> +

>> +	m_can_class_unregister(mcan_class);

>> +

>> +	platform_set_drvdata(pdev, NULL);

>> +

>> +	return 0;

>> +}

>> +

>> +static int __maybe_unused m_can_runtime_suspend(struct device *dev)

>> +{

>> +	struct net_device *ndev = dev_get_drvdata(dev);

>> +	struct m_can_priv *mcan_class = netdev_priv(ndev);

>> +

>> +	m_can_class_suspend(dev);

>> +

>> +	clk_disable_unprepare(mcan_class->cclk);

>> +	clk_disable_unprepare(mcan_class->hclk);

>> +

>> +	return 0;

>> +}

>> +

>> +static int __maybe_unused m_can_runtime_resume(struct device *dev)

>> +{

>> +	struct net_device *ndev = dev_get_drvdata(dev);

>> +	struct m_can_priv *mcan_class = netdev_priv(ndev);

>> +	int err;

>> +

>> +	err = clk_prepare_enable(mcan_class->hclk);

>> +	if (err)

>> +		return err;

>> +

>> +	err = clk_prepare_enable(mcan_class->cclk);

>> +	if (err)

>> +		clk_disable_unprepare(mcan_class->hclk);

>> +

>> +	m_can_class_resume(dev);

>> +

>> +	return err;

>> +}

>> +

>> +static const struct dev_pm_ops m_can_pmops = {

>> +	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,

>> +			   m_can_runtime_resume, NULL)

>> +	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)

>> +};

>> +

>> +static const struct of_device_id m_can_of_table[] = {

>> +	{ .compatible = "bosch,m_can", .data = NULL },

>> +	{ /* sentinel */ },

>> +};

>> +MODULE_DEVICE_TABLE(of, m_can_of_table);

>> +

>> +static struct platform_driver m_can_plat_driver = {

>> +	.driver = {

>> +		.name = KBUILD_MODNAME,

>> +		.of_match_table = m_can_of_table,

>> +		.pm     = &m_can_pmops,

>> +	},

>> +	.probe = m_can_plat_probe,

>> +	.remove = m_can_plat_remove,

>> +};

>> +

>> +module_platform_driver(m_can_plat_driver);

>> +

>> +MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");

>> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");

>> +MODULE_LICENSE("GPL v2");

>> +MODULE_DESCRIPTION("M_CAN driver for IO Mapped Bosch controllers");

> 

> Wolfgang.

> 



-- 
------------------
Dan Murphy
diff mbox series

Patch

diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
index 04f20dd39007..f7119fd72df4 100644
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
@@ -1,5 +1,14 @@ 
 config CAN_M_CAN
+	tristate "Bosch M_CAN support"
+	---help---
+	  Say Y here if you want support for Bosch M_CAN controller framework.
+	  This is common support for devices that embed the Bosch M_CAN IP.
+
+config CAN_M_CAN_PLATFORM
+	tristate "Bosch M_CAN support for io-mapped devices"
 	depends on HAS_IOMEM
-	tristate "Bosch M_CAN devices"
+	depends on CAN_M_CAN
 	---help---
-	  Say Y here if you want to support for Bosch M_CAN controller.
+	  Say Y here if you want support for IO Mapped Bosch M_CAN controller.
+	  This support is for devices that have the Bosch M_CAN controller
+	  IP embedded into the device and the IP is IO Mapped to the processor.
diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
index 8bbd7f24f5be..057bbcdb3c74 100644
--- a/drivers/net/can/m_can/Makefile
+++ b/drivers/net/can/m_can/Makefile
@@ -3,3 +3,4 @@ 
 #
 
 obj-$(CONFIG_CAN_M_CAN) += m_can.o
+obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 9b449400376b..f2231fb02525 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1,20 +1,14 @@ 
-/*
- * CAN bus driver for Bosch M_CAN controller
- *
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *	Dong Aisheng <b29396@freescale.com>
- *
- * Bosch M_CAN user manual can be obtained from:
+// SPDX-License-Identifier: GPL-2.0
+// CAN bus driver for Bosch M_CAN controller
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+//      Dong Aisheng <b29396@freescale.com>
+// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
+
+/* Bosch M_CAN user manual can be obtained from:
  * http://www.bosch-semiconductors.de/media/pdf_1/ipmodules_1/m_can/
  * mcan_users_manual_v302.pdf
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
-#include <linux/clk.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -28,11 +22,7 @@ 
 #include <linux/can/dev.h>
 #include <linux/pinctrl/consumer.h>
 
-/* napi related */
-#define M_CAN_NAPI_WEIGHT	64
-
-/* message ram configuration data length */
-#define MRAM_CFG_LEN	8
+#include "m_can.h"
 
 /* registers definition */
 enum m_can_reg {
@@ -86,28 +76,11 @@  enum m_can_reg {
 	M_CAN_TXEFA	= 0xf8,
 };
 
-/* m_can lec values */
-enum m_can_lec_type {
-	LEC_NO_ERROR = 0,
-	LEC_STUFF_ERROR,
-	LEC_FORM_ERROR,
-	LEC_ACK_ERROR,
-	LEC_BIT1_ERROR,
-	LEC_BIT0_ERROR,
-	LEC_CRC_ERROR,
-	LEC_UNUSED,
-};
+/* napi related */
+#define M_CAN_NAPI_WEIGHT	64
 
-enum m_can_mram_cfg {
-	MRAM_SIDF = 0,
-	MRAM_XIDF,
-	MRAM_RXF0,
-	MRAM_RXF1,
-	MRAM_RXB,
-	MRAM_TXE,
-	MRAM_TXB,
-	MRAM_CFG_NUM,
-};
+/* message ram configuration data length */
+#define MRAM_CFG_LEN	8
 
 /* Core Release Register (CREL) */
 #define CREL_REL_SHIFT		28
@@ -347,68 +320,72 @@  enum m_can_mram_cfg {
 #define TX_EVENT_MM_SHIFT	TX_BUF_MM_SHIFT
 #define TX_EVENT_MM_MASK	(0xff << TX_EVENT_MM_SHIFT)
 
-/* address offset and element number for each FIFO/Buffer in the Message RAM */
-struct mram_cfg {
-	u16 off;
-	u8  num;
-};
-
-/* m_can private data structure */
-struct m_can_priv {
-	struct can_priv can;	/* must be the first member */
-	struct napi_struct napi;
-	struct net_device *dev;
-	struct device *device;
-	struct clk *hclk;
-	struct clk *cclk;
-	void __iomem *base;
-	u32 irqstatus;
-	int version;
-
-	/* message ram configuration */
-	void __iomem *mram_base;
-	struct mram_cfg mcfg[MRAM_CFG_NUM];
-};
+static u32 m_can_read(struct m_can_priv *priv, enum m_can_reg reg)
+{
+	if (priv->ops->read_reg)
+		return priv->ops->read_reg(priv, reg);
+	else
+		return -EINVAL;
+}
 
-static inline u32 m_can_read(const struct m_can_priv *priv, enum m_can_reg reg)
+static int m_can_write(struct m_can_priv *priv, enum m_can_reg reg, u32 val)
 {
-	return readl(priv->base + reg);
+	if (priv->ops->write_reg)
+		return priv->ops->write_reg(priv, reg, val);
+	else
+		return -EINVAL;
 }
 
-static inline void m_can_write(const struct m_can_priv *priv,
-			       enum m_can_reg reg, u32 val)
+static u32 m_can_fifo_read(struct m_can_priv *priv,
+			   u32 fgi, unsigned int offset)
 {
-	writel(val, priv->base + reg);
+	u32 addr_offset = priv->mcfg[MRAM_RXF0].off + fgi * RXF0_ELEMENT_SIZE +
+			  offset;
+
+	if (priv->ops->read_fifo)
+		return priv->ops->read_fifo(priv, addr_offset);
+	else
+		return -EINVAL;
 }
 
-static inline u32 m_can_fifo_read(const struct m_can_priv *priv,
-				  u32 fgi, unsigned int offset)
+static u32 m_can_fifo_write(struct m_can_priv *priv,
+			    u32 fpi, unsigned int offset, u32 val)
 {
-	return readl(priv->mram_base + priv->mcfg[MRAM_RXF0].off +
-		     fgi * RXF0_ELEMENT_SIZE + offset);
+	u32 addr_offset = priv->mcfg[MRAM_TXB].off + fpi * TXB_ELEMENT_SIZE +
+			  offset;
+
+	if (priv->ops->write_fifo)
+		return priv->ops->write_fifo(priv, addr_offset, val);
+	else
+		return -EINVAL;
 }
 
-static inline void m_can_fifo_write(const struct m_can_priv *priv,
-				    u32 fpi, unsigned int offset, u32 val)
+static u32 m_can_fifo_write_no_off(struct m_can_priv *priv,
+				   u32 fpi, u32 val)
 {
-	writel(val, priv->mram_base + priv->mcfg[MRAM_TXB].off +
-	       fpi * TXB_ELEMENT_SIZE + offset);
+	if (priv->ops->write_fifo)
+		return priv->ops->write_fifo(priv, fpi, val);
+	else
+		return 0;
 }
 
-static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,
-				      u32 fgi,
-				      u32 offset) {
-	return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +
-			fgi * TXE_ELEMENT_SIZE + offset);
+static u32 m_can_txe_fifo_read(struct m_can_priv *priv, u32 fgi, u32 offset)
+{
+	u32 addr_offset = priv->mcfg[MRAM_TXE].off + fgi * TXE_ELEMENT_SIZE +
+			  offset;
+
+	if (priv->ops->read_fifo)
+		return priv->ops->read_fifo(priv, addr_offset);
+	else
+		return -EINVAL;
 }
 
-static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)
+static inline bool m_can_tx_fifo_full(struct m_can_priv *priv)
 {
 		return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);
 }
 
-static inline void m_can_config_endisable(const struct m_can_priv *priv,
-					  bool enable)
+void m_can_config_endisable(struct m_can_priv *priv, bool enable)
 {
 	u32 cccr = m_can_read(priv, M_CAN_CCCR);
 	u32 timeout = 10;
@@ -430,7 +407,7 @@  static inline void m_can_config_endisable(const struct m_can_priv *priv,
 
 	while ((m_can_read(priv, M_CAN_CCCR) & (CCCR_INIT | CCCR_CCE)) != val) {
 		if (timeout == 0) {
-			netdev_warn(priv->dev, "Failed to init module\n");
+			netdev_warn(priv->net, "Failed to init module\n");
 			return;
 		}
 		timeout--;
@@ -438,17 +415,29 @@  static inline void m_can_config_endisable(const struct m_can_priv *priv,
 	}
 }
 
-static inline void m_can_enable_all_interrupts(const struct m_can_priv *priv)
+static inline void m_can_enable_all_interrupts(struct m_can_priv *priv)
 {
 	/* Only interrupt line 0 is used in this driver */
 	m_can_write(priv, M_CAN_ILE, ILE_EINT0);
 }
 
-static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)
+static inline void m_can_disable_all_interrupts(struct m_can_priv *priv)
 {
 	m_can_write(priv, M_CAN_ILE, 0x0);
 }
 
+static void m_can_clean(struct net_device *net)
+{
+	struct m_can_priv *priv = netdev_priv(net);
+
+	if (priv->tx_skb) {
+		net->stats.tx_errors++;
+		dev_kfree_skb(priv->tx_skb);
+		can_free_echo_skb(priv->net, 0);
+		priv->tx_skb = NULL;
+	}
+}
+
 static void m_can_read_fifo(struct net_device *dev, u32 rxfs)
 {
 	struct net_device_stats *stats = &dev->stats;
@@ -633,9 +622,12 @@  static int m_can_clk_start(struct m_can_priv *priv)
 {
 	int err;
 
-	err = pm_runtime_get_sync(priv->device);
+	if (priv->pm_clock_support == 0)
+		return 0;
+
+	err = pm_runtime_get_sync(priv->dev);
 	if (err < 0) {
-		pm_runtime_put_noidle(priv->device);
+		pm_runtime_put_noidle(priv->dev);
 		return err;
 	}
 
@@ -644,7 +636,8 @@  static int m_can_clk_start(struct m_can_priv *priv)
 
 static void m_can_clk_stop(struct m_can_priv *priv)
 {
-	pm_runtime_put_sync(priv->device);
+	if (priv->pm_clock_support)
+		pm_runtime_put_sync(priv->dev);
 }
 
 static int m_can_get_berr_counter(const struct net_device *dev,
@@ -811,9 +804,8 @@  static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,
 	return work_done;
 }
 
-static int m_can_poll(struct napi_struct *napi, int quota)
+static int m_can_rx_handler(struct net_device *dev, int quota)
 {
-	struct net_device *dev = napi->dev;
 	struct m_can_priv *priv = netdev_priv(dev);
 	int work_done = 0;
 	u32 irqstatus, psr;
@@ -831,13 +823,33 @@  static int m_can_poll(struct napi_struct *napi, int quota)
 
 	if (irqstatus & IR_RF0N)
 		work_done += m_can_do_rx_poll(dev, (quota - work_done));
+end:
+	return work_done;
+}
+
+static int m_can_rx_peripherial(struct net_device *dev)
+{
+	struct m_can_priv *priv = netdev_priv(dev);
+
+	m_can_rx_handler(dev, 1);
+
+	m_can_enable_all_interrupts(priv);
 
+	return 0;
+}
+
+static int m_can_poll(struct napi_struct *napi, int quota)
+{
+	struct net_device *dev = napi->dev;
+	struct m_can_priv *priv = netdev_priv(dev);
+	int work_done;
+
+	work_done = m_can_rx_handler(dev, quota);
 	if (work_done < quota) {
 		napi_complete_done(napi, work_done);
 		m_can_enable_all_interrupts(priv);
 	}
 
-end:
 	return work_done;
 }
 
@@ -894,6 +906,9 @@  static irqreturn_t m_can_isr(int irq, void *dev_id)
 	if (ir & IR_ALL_INT)
 		m_can_write(priv, M_CAN_IR, ir);
 
+	if (priv->ops->clear_interrupts)
+		priv->ops->clear_interrupts(priv);
+
 	/* schedule NAPI in case of
 	 * - rx IRQ
 	 * - state change IRQ
@@ -902,7 +917,10 @@  static irqreturn_t m_can_isr(int irq, void *dev_id)
 	if ((ir & IR_RF0N) || (ir & IR_ERR_ALL_30X)) {
 		priv->irqstatus = ir;
 		m_can_disable_all_interrupts(priv);
-		napi_schedule(&priv->napi);
+		if (!priv->is_peripherial)
+			napi_schedule(&priv->napi);
+		else
+			m_can_rx_peripherial(dev);
 	}
 
 	if (priv->version == 30) {
@@ -1155,6 +1173,9 @@  static void m_can_chip_config(struct net_device *dev)
 	m_can_set_bittiming(dev);
 
 	m_can_config_endisable(priv, false);
+
+	if (priv->ops->init)
+		priv->ops->init(priv);
 }
 
 static void m_can_start(struct net_device *dev)
@@ -1173,6 +1194,7 @@  static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
 {
 	switch (mode) {
 	case CAN_MODE_START:
+		m_can_clean(dev);
 		m_can_start(dev);
 		netif_wake_queue(dev);
 		break;
@@ -1188,20 +1210,17 @@  static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
  * else it returns the release and step coded as:
  * return value = 10 * <release> + 1 * <step>
  */
-static int m_can_check_core_release(void __iomem *m_can_base)
+static int m_can_check_core_release(struct m_can_priv *priv)
 {
 	u32 crel_reg;
 	u8 rel;
 	u8 step;
 	int res;
-	struct m_can_priv temp_priv = {
-		.base = m_can_base
-	};
 
 	/* Read Core Release Version and split into version number
 	 * Example: Version 3.2.1 => rel = 3; step = 2; substep = 1;
 	 */
-	crel_reg = m_can_read(&temp_priv, M_CAN_CREL);
+	crel_reg = m_can_read(priv, M_CAN_CREL);
 	rel = (u8)((crel_reg & CREL_REL_MASK) >> CREL_REL_SHIFT);
 	step = (u8)((crel_reg & CREL_STEP_MASK) >> CREL_STEP_SHIFT);
 
@@ -1219,18 +1238,26 @@  static int m_can_check_core_release(void __iomem *m_can_base)
 /* Selectable Non ISO support only in version 3.2.x
  * This function checks if the bit is writable.
  */
-static bool m_can_niso_supported(const struct m_can_priv *priv)
+static bool m_can_niso_supported(struct m_can_priv *priv)
 {
-	u32 cccr_reg, cccr_poll;
-	int niso_timeout;
+	u32 cccr_reg, cccr_poll = 0;
+	int niso_timeout = -ETIMEDOUT;
+	int i;
 
 	m_can_config_endisable(priv, true);
 	cccr_reg = m_can_read(priv, M_CAN_CCCR);
 	cccr_reg |= CCCR_NISO;
 	m_can_write(priv, M_CAN_CCCR, cccr_reg);
 
-	niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,
-					  (cccr_poll == cccr_reg), 0, 10);
+	for (i = 0; i <= 10; i++) {
+		cccr_poll = m_can_read(priv, M_CAN_CCCR);
+		if (cccr_poll == cccr_reg) {
+			niso_timeout = 0;
+			break;
+		}
+
+		usleep_range(1, 5);
+	}
 
 	/* Clear NISO */
 	cccr_reg &= ~(CCCR_NISO);
@@ -1242,107 +1269,79 @@  static bool m_can_niso_supported(const struct m_can_priv *priv)
 	return !niso_timeout;
 }
 
-static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
-			   void __iomem *addr)
+static int m_can_dev_setup(struct m_can_priv *m_can_dev)
 {
-	struct m_can_priv *priv;
+	struct net_device *dev = m_can_dev->net;
 	int m_can_version;
 
-	m_can_version = m_can_check_core_release(addr);
+	m_can_version = m_can_check_core_release(m_can_dev);
 	/* return if unsupported version */
 	if (!m_can_version) {
-		dev_err(&pdev->dev, "Unsupported version number: %2d",
+		dev_err(m_can_dev->dev, "Unsupported version number: %2d",
 			m_can_version);
 		return -EINVAL;
 	}
 
-	priv = netdev_priv(dev);
-	netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);
+	if (!m_can_dev->is_peripherial)
+		netif_napi_add(dev, &m_can_dev->napi,
+			       m_can_poll, M_CAN_NAPI_WEIGHT);
 
 	/* Shared properties of all M_CAN versions */
-	priv->version = m_can_version;
-	priv->dev = dev;
-	priv->base = addr;
-	priv->can.do_set_mode = m_can_set_mode;
-	priv->can.do_get_berr_counter = m_can_get_berr_counter;
+	m_can_dev->version = m_can_version;
+	m_can_dev->can.do_set_mode = m_can_set_mode;
+	m_can_dev->can.do_get_berr_counter = m_can_get_berr_counter;
 
 	/* Set M_CAN supported operations */
-	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
+	m_can_dev->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
 					CAN_CTRLMODE_LISTENONLY |
 					CAN_CTRLMODE_BERR_REPORTING |
 					CAN_CTRLMODE_FD;
 
 	/* Set properties depending on M_CAN version */
-	switch (priv->version) {
+	switch (m_can_dev->version) {
 	case 30:
 		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.x */
 		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
-		priv->can.bittiming_const = &m_can_bittiming_const_30X;
-		priv->can.data_bittiming_const =
-				&m_can_data_bittiming_const_30X;
+		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?
+			m_can_dev->bit_timing : &m_can_bittiming_const_30X;
+
+		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?
+						m_can_dev->data_timing :
+						&m_can_data_bittiming_const_30X;
 		break;
 	case 31:
 		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */
 		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
-		priv->can.bittiming_const = &m_can_bittiming_const_31X;
-		priv->can.data_bittiming_const =
-				&m_can_data_bittiming_const_31X;
+		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?
+			m_can_dev->bit_timing : &m_can_bittiming_const_31X;
+
+		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?
+						m_can_dev->data_timing :
+						&m_can_data_bittiming_const_31X;
 		break;
 	case 32:
-		priv->can.bittiming_const = &m_can_bittiming_const_31X;
-		priv->can.data_bittiming_const =
-				&m_can_data_bittiming_const_31X;
-		priv->can.ctrlmode_supported |= (m_can_niso_supported(priv)
+		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?
+			m_can_dev->bit_timing : &m_can_bittiming_const_31X;
+
+		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?
+						m_can_dev->data_timing :
+						&m_can_data_bittiming_const_31X;
+
+		m_can_dev->can.ctrlmode_supported |=
+						(m_can_niso_supported(m_can_dev)
 						? CAN_CTRLMODE_FD_NON_ISO
 						: 0);
 		break;
 	default:
-		dev_err(&pdev->dev, "Unsupported version number: %2d",
-			priv->version);
+		dev_err(m_can_dev->dev, "Unsupported version number: %2d",
+			m_can_dev->version);
 		return -EINVAL;
 	}
 
-	return 0;
-}
-
-static int m_can_open(struct net_device *dev)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	int err;
-
-	err = m_can_clk_start(priv);
-	if (err)
-		return err;
-
-	/* open the can device */
-	err = open_candev(dev);
-	if (err) {
-		netdev_err(dev, "failed to open can device\n");
-		goto exit_disable_clks;
-	}
-
-	/* register interrupt handler */
-	err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
-			  dev);
-	if (err < 0) {
-		netdev_err(dev, "failed to request interrupt\n");
-		goto exit_irq_fail;
-	}
-
-	/* start the m_can controller */
-	m_can_start(dev);
-
-	can_led_event(dev, CAN_LED_EVENT_OPEN);
-	napi_enable(&priv->napi);
-	netif_start_queue(dev);
+	if (m_can_dev->ops->init)
+		m_can_dev->ops->init(m_can_dev);
 
 	return 0;
-
-exit_irq_fail:
-	close_candev(dev);
-exit_disable_clks:
-	m_can_clk_stop(priv);
-	return err;
 }
 
 static void m_can_stop(struct net_device *dev)
@@ -1361,10 +1360,18 @@  static int m_can_close(struct net_device *dev)
 	struct m_can_priv *priv = netdev_priv(dev);
 
 	netif_stop_queue(dev);
-	napi_disable(&priv->napi);
+	if (!priv->is_peripherial)
+		napi_disable(&priv->napi);
 	m_can_stop(dev);
 	m_can_clk_stop(priv);
 	free_irq(dev->irq, dev);
+
+	if (priv->is_peripherial) {
+		priv->tx_skb = NULL;
+		destroy_workqueue(priv->tx_wq);
+		priv->tx_wq = NULL;
+	}
+
 	close_candev(dev);
 	can_led_event(dev, CAN_LED_EVENT_STOP);
 
@@ -1385,18 +1392,15 @@  static int m_can_next_echo_skb_occupied(struct net_device *dev, int putidx)
 	return !!priv->can.echo_skb[next_idx];
 }
 
-static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
-				    struct net_device *dev)
+static netdev_tx_t m_can_tx_handler(struct m_can_priv *priv)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
-	struct canfd_frame *cf = (struct canfd_frame *)skb->data;
+	struct canfd_frame *cf = (struct canfd_frame *)priv->tx_skb->data;
+	struct net_device *dev = priv->net;
+	struct sk_buff *skb = priv->tx_skb;
 	u32 id, cccr, fdflags;
 	int i;
 	int putidx;
 
-	if (can_dropped_invalid_skb(dev, skb))
-		return NETDEV_TX_OK;
-
 	/* Generate ID field for TX buffer Element */
 	/* Common to all supported M_CAN versions */
 	if (cf->can_id & CAN_EFF_FLAG) {
@@ -1492,14 +1496,117 @@  static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
 		m_can_write(priv, M_CAN_TXBAR, (1 << putidx));
 
 		/* stop network queue if fifo full */
-			if (m_can_tx_fifo_full(priv) ||
-			    m_can_next_echo_skb_occupied(dev, putidx))
-				netif_stop_queue(dev);
+		if (m_can_tx_fifo_full(priv) ||
+		    m_can_next_echo_skb_occupied(dev, putidx))
+			netif_stop_queue(dev);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static void m_can_tx_work_queue(struct work_struct *ws)
+{
+	struct m_can_priv *priv = container_of(ws, struct m_can_priv,
+						tx_work);
+	netdev_tx_t ret;
+
+	ret = m_can_tx_handler(priv);
+	if (ret == NETDEV_TX_OK)
+		priv->tx_skb = NULL;
+}
+
+static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
+				    struct net_device *dev)
+{
+	struct m_can_priv *priv = netdev_priv(dev);
+
+	if (can_dropped_invalid_skb(dev, skb))
+		return NETDEV_TX_OK;
+
+	if (priv->is_peripherial) {
+		if (priv->tx_skb) {
+			netdev_err(dev, "hard_xmit called while tx busy\n");
+			return NETDEV_TX_BUSY;
+		}
+
+		if (priv->can.state == CAN_STATE_BUS_OFF) {
+			m_can_clean(dev);
+		} else {
+			priv->tx_skb = skb;
+			netif_stop_queue(priv->net);
+			queue_work(priv->tx_wq, &priv->tx_work);
+		}
+	} else {
+		priv->tx_skb = skb;
+		return m_can_tx_handler(priv);
 	}
 
 	return NETDEV_TX_OK;
 }
 
+static int m_can_open(struct net_device *dev)
+{
+	struct m_can_priv *priv = netdev_priv(dev);
+	int err;
+
+	err = m_can_clk_start(priv);
+	if (err)
+		return err;
+
+	/* open the can device */
+	err = open_candev(dev);
+	if (err) {
+		netdev_err(dev, "failed to open can device\n");
+		goto exit_disable_clks;
+	}
+
+	/* register interrupt handler */
+	if (priv->is_peripherial) {
+		priv->tx_skb = NULL;
+		priv->tx_wq = alloc_workqueue("mcan_wq",
+					      WQ_FREEZABLE | WQ_MEM_RECLAIM, 0);
+		if (!priv->tx_wq) {
+			err = -ENOMEM;
+			goto out_wq_fail;
+		}
+
+		INIT_WORK(&priv->tx_work, m_can_tx_work_queue);
+
+		err = request_threaded_irq(dev->irq, NULL, m_can_isr,
+					   IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
+					   dev->name, dev);
+	} else {
+		err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
+				  dev);
+	}
+
+	if (err < 0) {
+		netdev_err(dev, "failed to request interrupt\n");
+		goto exit_irq_fail;
+	}
+
+	/* start the m_can controller */
+	m_can_start(dev);
+
+	can_led_event(dev, CAN_LED_EVENT_OPEN);
+
+	if (!priv->is_peripherial)
+		napi_enable(&priv->napi);
+
+	netif_start_queue(dev);
+
+	return 0;
+
+exit_irq_fail:
+	if (priv->is_peripherial)
+		destroy_workqueue(priv->tx_wq);
+out_wq_fail:
+	close_candev(dev);
+exit_disable_clks:
+	m_can_clk_stop(priv);
+	return err;
+}
+
 static const struct net_device_ops m_can_netdev_ops = {
 	.ndo_open = m_can_open,
 	.ndo_stop = m_can_close,
@@ -1515,20 +1622,6 @@  static int register_m_can_dev(struct net_device *dev)
 	return register_candev(dev);
 }
 
-static void m_can_init_ram(struct m_can_priv *priv)
-{
-	int end, i, start;
-
-	/* initialize the entire Message RAM in use to avoid possible
-	 * ECC/parity checksum errors when reading an uninitialized buffer
-	 */
-	start = priv->mcfg[MRAM_SIDF].off;
-	end = priv->mcfg[MRAM_TXB].off +
-		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
-	for (i = start; i < end; i += 4)
-		writel(0x0, priv->mram_base + i);
-}
-
 static void m_can_of_parse_mram(struct m_can_priv *priv,
 				const u32 *mram_config_vals)
 {
@@ -1556,9 +1649,8 @@  static void m_can_of_parse_mram(struct m_can_priv *priv,
 	priv->mcfg[MRAM_TXB].num = mram_config_vals[7] &
 			(TXBC_NDTB_MASK >> TXBC_NDTB_SHIFT);
 
-	dev_dbg(priv->device,
-		"mram_base %p sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
-		priv->mram_base,
+	dev_dbg(priv->dev,
+		"sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
 		priv->mcfg[MRAM_SIDF].off, priv->mcfg[MRAM_SIDF].num,
 		priv->mcfg[MRAM_XIDF].off, priv->mcfg[MRAM_XIDF].num,
 		priv->mcfg[MRAM_RXF0].off, priv->mcfg[MRAM_RXF0].num,
@@ -1566,63 +1658,55 @@  static void m_can_of_parse_mram(struct m_can_priv *priv,
 		priv->mcfg[MRAM_RXB].off, priv->mcfg[MRAM_RXB].num,
 		priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
 		priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
-
-	m_can_init_ram(priv);
 }
 
-static int m_can_plat_probe(struct platform_device *pdev)
+void m_can_init_ram(struct m_can_priv *priv)
 {
-	struct net_device *dev;
-	struct m_can_priv *priv;
-	struct resource *res;
-	void __iomem *addr;
-	void __iomem *mram_addr;
-	struct clk *hclk, *cclk;
-	int irq, ret;
-	struct device_node *np;
-	u32 mram_config_vals[MRAM_CFG_LEN];
-	u32 tx_fifo_size;
-
-	np = pdev->dev.of_node;
+	int end, i, start;
 
-	hclk = devm_clk_get(&pdev->dev, "hclk");
-	cclk = devm_clk_get(&pdev->dev, "cclk");
+	/* initialize the entire Message RAM in use to avoid possible
+	 * ECC/parity checksum errors when reading an uninitialized buffer
+	 */
+	start = priv->mcfg[MRAM_SIDF].off;
+	end = priv->mcfg[MRAM_TXB].off +
+		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
 
-	if (IS_ERR(hclk) || IS_ERR(cclk)) {
-		dev_err(&pdev->dev, "no clock found\n");
-		ret = -ENODEV;
-		goto failed_ret;
-	}
+	for (i = start; i < end; i += 4)
+		m_can_fifo_write_no_off(priv, i, 0x0);
+}
+EXPORT_SYMBOL_GPL(m_can_init_ram);
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
-	addr = devm_ioremap_resource(&pdev->dev, res);
-	irq = platform_get_irq_byname(pdev, "int0");
+int m_can_class_get_clocks(struct m_can_priv *m_can_dev)
+{
+	int ret = 0;
 
-	if (IS_ERR(addr) || irq < 0) {
-		ret = -EINVAL;
-		goto failed_ret;
-	}
+	m_can_dev->hclk = devm_clk_get(m_can_dev->dev, "hclk");
+	m_can_dev->cclk = devm_clk_get(m_can_dev->dev, "cclk");
 
-	/* message ram could be shared */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
-	if (!res) {
+	if (IS_ERR(m_can_dev->cclk)) {
+		dev_err(m_can_dev->dev, "no clock found\n");
 		ret = -ENODEV;
-		goto failed_ret;
 	}
 
-	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!mram_addr) {
-		ret = -ENOMEM;
-		goto failed_ret;
-	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(m_can_class_get_clocks);
 
-	/* get message ram configuration */
-	ret = of_property_read_u32_array(np, "bosch,mram-cfg",
-					 mram_config_vals,
-					 sizeof(mram_config_vals) / 4);
+struct m_can_priv *m_can_class_allocate_dev(struct device *dev)
+{
+	struct m_can_priv *class_dev = NULL;
+	u32 mram_config_vals[MRAM_CFG_LEN];
+	struct net_device *net_dev;
+	u32 tx_fifo_size;
+	int ret;
+
+	ret = fwnode_property_read_u32_array(dev_fwnode(dev),
+					     "bosch,mram-cfg",
+					     mram_config_vals,
+					     sizeof(mram_config_vals) / 4);
 	if (ret) {
-		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
-		goto failed_ret;
+		dev_err(dev, "Could not get Message RAM configuration.");
+		goto out;
 	}
 
 	/* Get TX FIFO size
@@ -1631,66 +1715,74 @@  static int m_can_plat_probe(struct platform_device *pdev)
 	tx_fifo_size = mram_config_vals[7];
 
 	/* allocate the m_can device */
-	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
-	if (!dev) {
-		ret = -ENOMEM;
-		goto failed_ret;
+	net_dev = alloc_candev(sizeof(*class_dev), tx_fifo_size);
+	if (!net_dev) {
+		dev_err(dev, "Failed to allocate CAN device");
+		goto out;
+	}
+
+	class_dev = netdev_priv(net_dev);
+	if (!class_dev) {
+		dev_err(dev, "Failed to init netdev private");
+		goto out;
 	}
 
-	priv = netdev_priv(dev);
-	dev->irq = irq;
-	priv->device = &pdev->dev;
-	priv->hclk = hclk;
-	priv->cclk = cclk;
-	priv->can.clock.freq = clk_get_rate(cclk);
-	priv->mram_base = mram_addr;
+	class_dev->net = net_dev;
+	class_dev->dev = dev;
+	SET_NETDEV_DEV(net_dev, dev);
 
-	platform_set_drvdata(pdev, dev);
-	SET_NETDEV_DEV(dev, &pdev->dev);
+	m_can_of_parse_mram(class_dev, mram_config_vals);
+out:
+	return class_dev;
+}
+EXPORT_SYMBOL_GPL(m_can_class_allocate_dev);
 
-	/* Enable clocks. Necessary to read Core Release in order to determine
-	 * M_CAN version
-	 */
-	pm_runtime_enable(&pdev->dev);
-	ret = m_can_clk_start(priv);
-	if (ret)
-		goto pm_runtime_fail;
+int m_can_class_register(struct m_can_priv *m_can_dev)
+{
+	int ret;
+
+	if (m_can_dev->pm_clock_support) {
+		pm_runtime_enable(m_can_dev->dev);
+		ret = m_can_clk_start(m_can_dev);
+		if (ret)
+			goto pm_runtime_fail;
+	}
 
-	ret = m_can_dev_setup(pdev, dev, addr);
+	ret = m_can_dev_setup(m_can_dev);
 	if (ret)
 		goto clk_disable;
 
-	ret = register_m_can_dev(dev);
+	ret = register_m_can_dev(m_can_dev->net);
 	if (ret) {
-		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
-			KBUILD_MODNAME, ret);
+		dev_err(m_can_dev->dev, "registering %s failed (err=%d)\n",
+			m_can_dev->net->name, ret);
 		goto clk_disable;
 	}
 
-	m_can_of_parse_mram(priv, mram_config_vals);
+	devm_can_led_init(m_can_dev->net);
 
-	devm_can_led_init(dev);
+	of_can_transceiver(m_can_dev->net);
 
-	of_can_transceiver(dev);
-
-	dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",
-		 KBUILD_MODNAME, dev->irq, priv->version);
+	dev_info(m_can_dev->dev, "%s device registered (irq=%d, version=%d)\n",
+		 KBUILD_MODNAME, m_can_dev->net->irq, m_can_dev->version);
 
 	/* Probe finished
 	 * Stop clocks. They will be reactivated once the M_CAN device is opened
 	 */
 clk_disable:
-	m_can_clk_stop(priv);
+	m_can_clk_stop(m_can_dev);
 pm_runtime_fail:
 	if (ret) {
-		pm_runtime_disable(&pdev->dev);
-		free_candev(dev);
+		if (m_can_dev->pm_clock_support)
+			pm_runtime_disable(m_can_dev->dev);
+		free_candev(m_can_dev->net);
 	}
-failed_ret:
+
 	return ret;
 }
+EXPORT_SYMBOL_GPL(m_can_class_register);
 
-static __maybe_unused int m_can_suspend(struct device *dev)
+int m_can_class_suspend(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct m_can_priv *priv = netdev_priv(ndev);
@@ -1708,8 +1800,9 @@  static __maybe_unused int m_can_suspend(struct device *dev)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(m_can_class_suspend);
 
-static __maybe_unused int m_can_resume(struct device *dev)
+int m_can_class_resume(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct m_can_priv *priv = netdev_priv(ndev);
@@ -1733,79 +1826,19 @@  static __maybe_unused int m_can_resume(struct device *dev)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(m_can_class_resume);
 
-static void unregister_m_can_dev(struct net_device *dev)
-{
-	unregister_candev(dev);
-}
-
-static int m_can_plat_remove(struct platform_device *pdev)
-{
-	struct net_device *dev = platform_get_drvdata(pdev);
-
-	unregister_m_can_dev(dev);
-
-	pm_runtime_disable(&pdev->dev);
-
-	platform_set_drvdata(pdev, NULL);
-
-	free_candev(dev);
-
-	return 0;
-}
-
-static int __maybe_unused m_can_runtime_suspend(struct device *dev)
+void m_can_class_unregister(struct m_can_priv *m_can_dev)
 {
-	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
+	unregister_candev(m_can_dev->net);
 
-	clk_disable_unprepare(priv->cclk);
-	clk_disable_unprepare(priv->hclk);
+	m_can_clk_stop(m_can_dev);
 
-	return 0;
+	free_candev(m_can_dev->net);
 }
-
-static int __maybe_unused m_can_runtime_resume(struct device *dev)
-{
-	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
-	int err;
-
-	err = clk_prepare_enable(priv->hclk);
-	if (err)
-		return err;
-
-	err = clk_prepare_enable(priv->cclk);
-	if (err)
-		clk_disable_unprepare(priv->hclk);
-
-	return err;
-}
-
-static const struct dev_pm_ops m_can_pmops = {
-	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
-			   m_can_runtime_resume, NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
-};
-
-static const struct of_device_id m_can_of_table[] = {
-	{ .compatible = "bosch,m_can", .data = NULL },
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, m_can_of_table);
-
-static struct platform_driver m_can_plat_driver = {
-	.driver = {
-		.name = KBUILD_MODNAME,
-		.of_match_table = m_can_of_table,
-		.pm     = &m_can_pmops,
-	},
-	.probe = m_can_plat_probe,
-	.remove = m_can_plat_remove,
-};
-
-module_platform_driver(m_can_plat_driver);
+EXPORT_SYMBOL_GPL(m_can_class_unregister);
 
 MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");
diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
new file mode 100644
index 000000000000..b60f27dd9f33
--- /dev/null
+++ b/drivers/net/can/m_can/m_can.h
@@ -0,0 +1,110 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/* CAN bus driver for Bosch M_CAN controller
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#ifndef _CAN_M_CAN_H_
+#define _CAN_M_CAN_H_
+
+#include <linux/can/core.h>
+#include <linux/can/led.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/freezer.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/iopoll.h>
+#include <linux/can/dev.h>
+#include <linux/pinctrl/consumer.h>
+
+/* m_can lec values */
+enum m_can_lec_type {
+	LEC_NO_ERROR = 0,
+	LEC_STUFF_ERROR,
+	LEC_FORM_ERROR,
+	LEC_ACK_ERROR,
+	LEC_BIT1_ERROR,
+	LEC_BIT0_ERROR,
+	LEC_CRC_ERROR,
+	LEC_UNUSED,
+};
+
+enum m_can_mram_cfg {
+	MRAM_SIDF = 0,
+	MRAM_XIDF,
+	MRAM_RXF0,
+	MRAM_RXF1,
+	MRAM_RXB,
+	MRAM_TXE,
+	MRAM_TXB,
+	MRAM_CFG_NUM,
+};
+
+/* address offset and element number for each FIFO/Buffer in the Message RAM */
+struct mram_cfg {
+	u16 off;
+	u8  num;
+};
+
+struct m_can_priv;
+struct m_can_ops {
+	/* Device specific call backs */
+	int (*clear_interrupts)(struct m_can_priv *m_can_class);
+	u32 (*read_reg)(struct m_can_priv *m_can_class, int reg);
+	int (*write_reg)(struct m_can_priv *m_can_class, int reg, int val);
+	u32 (*read_fifo)(struct m_can_priv *m_can_class, int addr_offset);
+	int (*write_fifo)(struct m_can_priv *m_can_class, int addr_offset,
+			  int val);
+	int (*init)(struct m_can_priv *m_can_class);
+};
+
+struct m_can_priv {
+	struct can_priv can;
+	struct napi_struct napi;
+	struct net_device *net;
+	struct device *dev;
+	struct clk *hclk;
+	struct clk *cclk;
+
+	struct workqueue_struct *tx_wq;
+	struct work_struct tx_work;
+	struct sk_buff *tx_skb;
+
+	struct can_bittiming_const *bit_timing;
+	struct can_bittiming_const *data_timing;
+
+	struct m_can_ops *ops;
+
+	void *device_data;
+
+	int version;
+	int freq;
+	u32 irqstatus;
+
+	int pm_clock_support;
+	int is_peripherial;
+
+	struct mram_cfg mcfg[MRAM_CFG_NUM];
+};
+
+struct m_can_priv *m_can_class_allocate_dev(struct device *dev);
+int m_can_class_register(struct m_can_priv *m_can_dev);
+void m_can_class_unregister(struct m_can_priv *m_can_dev);
+int m_can_class_get_clocks(struct m_can_priv *m_can_dev);
+void m_can_init_ram(struct m_can_priv *priv);
+void m_can_config_endisable(struct m_can_priv *priv, bool enable);
+
+int m_can_class_suspend(struct device *dev);
+int m_can_class_resume(struct device *dev);
+#endif	/* _CAN_M_H_ */
diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
new file mode 100644
index 000000000000..b02d49f9ee4c
--- /dev/null
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -0,0 +1,202 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// IOMapped CAN bus driver for Bosch M_CAN controller
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+//	Dong Aisheng <b29396@freescale.com>
+//
+// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/platform_device.h>
+
+#include "m_can.h"
+
+struct m_can_plat_priv {
+	void __iomem *base;
+	void __iomem *mram_base;
+};
+
+static u32 iomap_read_reg(struct m_can_priv *cdev, int reg)
+{
+	struct m_can_plat_priv *priv =
+			(struct m_can_plat_priv *)cdev->device_data;
+
+	return readl(priv->base + reg);
+}
+
+static u32 iomap_read_fifo(struct m_can_priv *cdev, int offset)
+{
+	struct m_can_plat_priv *priv =
+			(struct m_can_plat_priv *)cdev->device_data;
+
+	return readl(priv->mram_base + offset);
+}
+
+static int iomap_write_reg(struct m_can_priv *cdev, int reg, int val)
+{
+	struct m_can_plat_priv *priv =
+			(struct m_can_plat_priv *)cdev->device_data;
+
+	writel(val, priv->base + reg);
+
+	return 0;
+}
+
+static int iomap_write_fifo(struct m_can_priv *cdev, int offset, int val)
+{
+	struct m_can_plat_priv *priv =
+			(struct m_can_plat_priv *)cdev->device_data;
+
+	writel(val, priv->mram_base + offset);
+
+	return 0;
+}
+
+static struct m_can_ops m_can_plat_ops = {
+	.read_reg = iomap_read_reg,
+	.write_reg = iomap_write_reg,
+	.write_fifo = iomap_write_fifo,
+	.read_fifo = iomap_read_fifo,
+};
+
+static int m_can_plat_probe(struct platform_device *pdev)
+{
+	struct m_can_priv *mcan_class;
+	struct m_can_plat_priv *priv;
+	struct resource *res;
+	void __iomem *addr;
+	void __iomem *mram_addr;
+	int irq, ret = 0;
+
+	mcan_class = m_can_class_allocate_dev(&pdev->dev);
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mcan_class->device_data = priv;
+
+	m_can_class_get_clocks(mcan_class);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
+	addr = devm_ioremap_resource(&pdev->dev, res);
+	irq = platform_get_irq_byname(pdev, "int0");
+	if (IS_ERR(addr) || irq < 0) {
+		ret = -EINVAL;
+		goto failed_ret;
+	}
+
+	/* message ram could be shared */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
+	if (!res) {
+		ret = -ENODEV;
+		goto failed_ret;
+	}
+
+	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!mram_addr) {
+		ret = -ENOMEM;
+		goto failed_ret;
+	}
+
+	priv->base = addr;
+	priv->mram_base = mram_addr;
+
+	mcan_class->net->irq = irq;
+	mcan_class->pm_clock_support = 1;
+	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
+	mcan_class->dev = &pdev->dev;
+
+	mcan_class->ops = &m_can_plat_ops;
+
+	mcan_class->is_peripherial = false;
+
+	platform_set_drvdata(pdev, mcan_class->dev);
+
+	m_can_init_ram(mcan_class);
+
+	ret = m_can_class_register(mcan_class);
+
+failed_ret:
+	return ret;
+}
+
+static __maybe_unused int m_can_suspend(struct device *dev)
+{
+	return m_can_class_suspend(dev);
+}
+
+static __maybe_unused int m_can_resume(struct device *dev)
+{
+	return m_can_class_resume(dev);
+}
+
+static int m_can_plat_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct m_can_priv *mcan_class = netdev_priv(dev);
+
+	m_can_class_unregister(mcan_class);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static int __maybe_unused m_can_runtime_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct m_can_priv *mcan_class = netdev_priv(ndev);
+
+	m_can_class_suspend(dev);
+
+	clk_disable_unprepare(mcan_class->cclk);
+	clk_disable_unprepare(mcan_class->hclk);
+
+	return 0;
+}
+
+static int __maybe_unused m_can_runtime_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct m_can_priv *mcan_class = netdev_priv(ndev);
+	int err;
+
+	err = clk_prepare_enable(mcan_class->hclk);
+	if (err)
+		return err;
+
+	err = clk_prepare_enable(mcan_class->cclk);
+	if (err)
+		clk_disable_unprepare(mcan_class->hclk);
+
+	m_can_class_resume(dev);
+
+	return err;
+}
+
+static const struct dev_pm_ops m_can_pmops = {
+	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
+			   m_can_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
+};
+
+static const struct of_device_id m_can_of_table[] = {
+	{ .compatible = "bosch,m_can", .data = NULL },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, m_can_of_table);
+
+static struct platform_driver m_can_plat_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = m_can_of_table,
+		.pm     = &m_can_pmops,
+	},
+	.probe = m_can_plat_probe,
+	.remove = m_can_plat_remove,
+};
+
+module_platform_driver(m_can_plat_driver);
+
+MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("M_CAN driver for IO Mapped Bosch controllers");