Message ID | 20190205093022.14532-1-linus.walleij@linaro.org |
---|---|
State | New |
Headers | show |
Series | mmc: slot-gpio: Remove override_active_level on WP | expand |
On Tue, 5 Feb 2019 at 10:30, Linus Walleij <linus.walleij@linaro.org> wrote: > > The argument "override_active_level" made it possible to > enforce a specific polarity on the write-protect > GPIO line. All callers in the kernel pass "false" to this > call after I have converted all drivers to use GPIO machine > descriptors, so remove the argument and clean out this. > > This kind of polarity inversion should be handled by the > GPIO descriptor inside the GPIO library if needed. > > This rids us of one instance of the kludgy calls into > the gpiod_get_raw_value() API. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> The change in jz4740_mmc is not needed anymore, because of an earlier clean up I have queued. However, no need to re-spin, I have amended the patch. Applied for next, thanks! Kind regards Uffe > --- > drivers/mmc/core/host.c | 2 +- > drivers/mmc/core/slot-gpio.c | 9 +-------- > drivers/mmc/host/davinci_mmc.c | 2 +- > drivers/mmc/host/jz4740_mmc.c | 2 +- > drivers/mmc/host/mmc_spi.c | 2 +- > drivers/mmc/host/mmci.c | 2 +- > drivers/mmc/host/pxamci.c | 2 +- > drivers/mmc/host/s3cmci.c | 2 +- > drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- > include/linux/mmc/slot-gpio.h | 2 +- > 10 files changed, 10 insertions(+), 17 deletions(-) > > diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c > index cf58ccaf22d5..766a90016e7e 100644 > --- a/drivers/mmc/core/host.c > +++ b/drivers/mmc/core/host.c > @@ -260,7 +260,7 @@ int mmc_of_parse(struct mmc_host *host) > /* Parse Write Protection */ > ro_cap_invert = device_property_read_bool(dev, "wp-inverted"); > > - ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert); > + ret = mmc_gpiod_request_ro(host, "wp", 0, 0, &ro_gpio_invert); > if (!ret) > dev_info(host->parent, "Got WP GPIO\n"); > else if (ret != -ENOENT && ret != -ENOSYS) > diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c > index 319ccd93383d..4afc6b87b465 100644 > --- a/drivers/mmc/core/slot-gpio.c > +++ b/drivers/mmc/core/slot-gpio.c > @@ -22,7 +22,6 @@ > struct mmc_gpio { > struct gpio_desc *ro_gpio; > struct gpio_desc *cd_gpio; > - bool override_ro_active_level; > bool override_cd_active_level; > irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id); > char *ro_label; > @@ -71,10 +70,6 @@ int mmc_gpio_get_ro(struct mmc_host *host) > if (!ctx || !ctx->ro_gpio) > return -ENOSYS; > > - if (ctx->override_ro_active_level) > - return !gpiod_get_raw_value_cansleep(ctx->ro_gpio) ^ > - !!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH); > - > return gpiod_get_value_cansleep(ctx->ro_gpio); > } > EXPORT_SYMBOL(mmc_gpio_get_ro); > @@ -225,7 +220,6 @@ EXPORT_SYMBOL(mmc_can_gpio_cd); > * @host: mmc host > * @con_id: function within the GPIO consumer > * @idx: index of the GPIO to obtain in the consumer > - * @override_active_level: ignore %GPIO_ACTIVE_LOW flag > * @debounce: debounce time in microseconds > * @gpio_invert: will return whether the GPIO line is inverted or not, > * set to NULL to ignore > @@ -233,7 +227,7 @@ EXPORT_SYMBOL(mmc_can_gpio_cd); > * Returns zero on success, else an error. > */ > int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, > - unsigned int idx, bool override_active_level, > + unsigned int idx, > unsigned int debounce, bool *gpio_invert) > { > struct mmc_gpio *ctx = host->slot.handler_priv; > @@ -253,7 +247,6 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, > if (gpio_invert) > *gpio_invert = !gpiod_is_active_low(desc); > > - ctx->override_ro_active_level = override_active_level; > ctx->ro_gpio = desc; > > return 0; > diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c > index 9e68c3645e22..49e0daf2ef5e 100644 > --- a/drivers/mmc/host/davinci_mmc.c > +++ b/drivers/mmc/host/davinci_mmc.c > @@ -1193,7 +1193,7 @@ static int mmc_davinci_parse_pdata(struct mmc_host *mmc) > else if (ret) > mmc->caps |= MMC_CAP_NEEDS_POLL; > > - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); > + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); > if (ret == -EPROBE_DEFER) > return ret; > > diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c > index 33215d66afa2..69eefb1bfe84 100644 > --- a/drivers/mmc/host/jz4740_mmc.c > +++ b/drivers/mmc/host/jz4740_mmc.c > @@ -959,7 +959,7 @@ static int jz4740_mmc_request_gpios(struct jz4740_mmc_host *host, > if (ret == -EPROBE_DEFER) > return ret; > > - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); > + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); > if (ret == -EPROBE_DEFER) > return ret; > > diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c > index 10ba46b728e8..d7a5bbeb391b 100644 > --- a/drivers/mmc/host/mmc_spi.c > +++ b/drivers/mmc/host/mmc_spi.c > @@ -1452,7 +1452,7 @@ static int mmc_spi_probe(struct spi_device *spi) > } > > /* Index 1 is write protect/read only */ > - status = mmc_gpiod_request_ro(mmc, NULL, 1, false, 0, NULL); > + status = mmc_gpiod_request_ro(mmc, NULL, 1, 0, NULL); > if (status == -EPROBE_DEFER) > goto fail_add_host; > if (!status) > diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c > index e352f5ad5801..7dd3ccf5baf0 100644 > --- a/drivers/mmc/host/mmci.c > +++ b/drivers/mmc/host/mmci.c > @@ -2011,7 +2011,7 @@ static int mmci_probe(struct amba_device *dev, > if (ret == -EPROBE_DEFER) > goto clk_disable; > > - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); > + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); > if (ret == -EPROBE_DEFER) > goto clk_disable; > } > diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c > index 8779bbaa6b69..c907bf502a12 100644 > --- a/drivers/mmc/host/pxamci.c > +++ b/drivers/mmc/host/pxamci.c > @@ -743,7 +743,7 @@ static int pxamci_probe(struct platform_device *pdev) > goto out; > } > > - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); > + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); > if (ret && ret != -ENOENT) { > dev_err(dev, "Failed requesting gpio_ro\n"); > goto out; > diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c > index 10f5219b3b40..f31333e831a7 100644 > --- a/drivers/mmc/host/s3cmci.c > +++ b/drivers/mmc/host/s3cmci.c > @@ -1530,7 +1530,7 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host) > return ret; > } > > - ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL); > + ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); > if (ret != -ENOENT) { > dev_err(&pdev->dev, "error requesting GPIO for WP %d\n", > ret); > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > index d0d319398a54..33256b016950 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -1200,7 +1200,7 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev, > host->mmc->parent->platform_data); > /* write_protect */ > if (boarddata->wp_type == ESDHC_WP_GPIO) { > - err = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL); > + err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); > if (err) { > dev_err(mmc_dev(host->mmc), > "failed to request write-protect gpio!\n"); > diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h > index feebd7aa6f5c..9fd3ce64a885 100644 > --- a/include/linux/mmc/slot-gpio.h > +++ b/include/linux/mmc/slot-gpio.h > @@ -22,7 +22,7 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, > unsigned int idx, bool override_active_level, > unsigned int debounce, bool *gpio_invert); > int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, > - unsigned int idx, bool override_active_level, > + unsigned int idx, > unsigned int debounce, bool *gpio_invert); > void mmc_gpio_set_cd_isr(struct mmc_host *host, > irqreturn_t (*isr)(int irq, void *dev_id)); > -- > 2.20.1 >
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index cf58ccaf22d5..766a90016e7e 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -260,7 +260,7 @@ int mmc_of_parse(struct mmc_host *host) /* Parse Write Protection */ ro_cap_invert = device_property_read_bool(dev, "wp-inverted"); - ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert); + ret = mmc_gpiod_request_ro(host, "wp", 0, 0, &ro_gpio_invert); if (!ret) dev_info(host->parent, "Got WP GPIO\n"); else if (ret != -ENOENT && ret != -ENOSYS) diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index 319ccd93383d..4afc6b87b465 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -22,7 +22,6 @@ struct mmc_gpio { struct gpio_desc *ro_gpio; struct gpio_desc *cd_gpio; - bool override_ro_active_level; bool override_cd_active_level; irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id); char *ro_label; @@ -71,10 +70,6 @@ int mmc_gpio_get_ro(struct mmc_host *host) if (!ctx || !ctx->ro_gpio) return -ENOSYS; - if (ctx->override_ro_active_level) - return !gpiod_get_raw_value_cansleep(ctx->ro_gpio) ^ - !!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH); - return gpiod_get_value_cansleep(ctx->ro_gpio); } EXPORT_SYMBOL(mmc_gpio_get_ro); @@ -225,7 +220,6 @@ EXPORT_SYMBOL(mmc_can_gpio_cd); * @host: mmc host * @con_id: function within the GPIO consumer * @idx: index of the GPIO to obtain in the consumer - * @override_active_level: ignore %GPIO_ACTIVE_LOW flag * @debounce: debounce time in microseconds * @gpio_invert: will return whether the GPIO line is inverted or not, * set to NULL to ignore @@ -233,7 +227,7 @@ EXPORT_SYMBOL(mmc_can_gpio_cd); * Returns zero on success, else an error. */ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, - unsigned int idx, bool override_active_level, + unsigned int idx, unsigned int debounce, bool *gpio_invert) { struct mmc_gpio *ctx = host->slot.handler_priv; @@ -253,7 +247,6 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, if (gpio_invert) *gpio_invert = !gpiod_is_active_low(desc); - ctx->override_ro_active_level = override_active_level; ctx->ro_gpio = desc; return 0; diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index 9e68c3645e22..49e0daf2ef5e 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -1193,7 +1193,7 @@ static int mmc_davinci_parse_pdata(struct mmc_host *mmc) else if (ret) mmc->caps |= MMC_CAP_NEEDS_POLL; - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); if (ret == -EPROBE_DEFER) return ret; diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index 33215d66afa2..69eefb1bfe84 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -959,7 +959,7 @@ static int jz4740_mmc_request_gpios(struct jz4740_mmc_host *host, if (ret == -EPROBE_DEFER) return ret; - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); if (ret == -EPROBE_DEFER) return ret; diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 10ba46b728e8..d7a5bbeb391b 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1452,7 +1452,7 @@ static int mmc_spi_probe(struct spi_device *spi) } /* Index 1 is write protect/read only */ - status = mmc_gpiod_request_ro(mmc, NULL, 1, false, 0, NULL); + status = mmc_gpiod_request_ro(mmc, NULL, 1, 0, NULL); if (status == -EPROBE_DEFER) goto fail_add_host; if (!status) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index e352f5ad5801..7dd3ccf5baf0 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -2011,7 +2011,7 @@ static int mmci_probe(struct amba_device *dev, if (ret == -EPROBE_DEFER) goto clk_disable; - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); if (ret == -EPROBE_DEFER) goto clk_disable; } diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 8779bbaa6b69..c907bf502a12 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -743,7 +743,7 @@ static int pxamci_probe(struct platform_device *pdev) goto out; } - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); if (ret && ret != -ENOENT) { dev_err(dev, "Failed requesting gpio_ro\n"); goto out; diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 10f5219b3b40..f31333e831a7 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1530,7 +1530,7 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host) return ret; } - ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL); + ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); if (ret != -ENOENT) { dev_err(&pdev->dev, "error requesting GPIO for WP %d\n", ret); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index d0d319398a54..33256b016950 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1200,7 +1200,7 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev, host->mmc->parent->platform_data); /* write_protect */ if (boarddata->wp_type == ESDHC_WP_GPIO) { - err = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL); + err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); if (err) { dev_err(mmc_dev(host->mmc), "failed to request write-protect gpio!\n"); diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h index feebd7aa6f5c..9fd3ce64a885 100644 --- a/include/linux/mmc/slot-gpio.h +++ b/include/linux/mmc/slot-gpio.h @@ -22,7 +22,7 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, unsigned int idx, bool override_active_level, unsigned int debounce, bool *gpio_invert); int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, - unsigned int idx, bool override_active_level, + unsigned int idx, unsigned int debounce, bool *gpio_invert); void mmc_gpio_set_cd_isr(struct mmc_host *host, irqreturn_t (*isr)(int irq, void *dev_id));
The argument "override_active_level" made it possible to enforce a specific polarity on the write-protect GPIO line. All callers in the kernel pass "false" to this call after I have converted all drivers to use GPIO machine descriptors, so remove the argument and clean out this. This kind of polarity inversion should be handled by the GPIO descriptor inside the GPIO library if needed. This rids us of one instance of the kludgy calls into the gpiod_get_raw_value() API. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/mmc/core/host.c | 2 +- drivers/mmc/core/slot-gpio.c | 9 +-------- drivers/mmc/host/davinci_mmc.c | 2 +- drivers/mmc/host/jz4740_mmc.c | 2 +- drivers/mmc/host/mmc_spi.c | 2 +- drivers/mmc/host/mmci.c | 2 +- drivers/mmc/host/pxamci.c | 2 +- drivers/mmc/host/s3cmci.c | 2 +- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- include/linux/mmc/slot-gpio.h | 2 +- 10 files changed, 10 insertions(+), 17 deletions(-) -- 2.20.1