diff mbox series

[v3,1/1] arm64: dts: sdm845: wireup the thermal trip points to cpufreq

Message ID 6a21a9ee7663e1b32d8ea81ac5e51d187aed25fb.1548093127.git.amit.kucheria@linaro.org
State New
Headers show
Series [v3,1/1] arm64: dts: sdm845: wireup the thermal trip points to cpufreq | expand

Commit Message

Amit Kucheria Jan. 21, 2019, 6:08 p.m. UTC
Since all cpus in the big and little clusters, respectively, are in the
same frequency domain, use all of them for mitigation in the
cooling-map. We end up with two cooling devices - one each for the big
and little clusters.

We throttle lightly at the first trip point, just removing the boost
frequency. At the next trip point we allow ourselves to be throttled to
any extent.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 225 +++++++++++++++++++++++++--
 1 file changed, 209 insertions(+), 16 deletions(-)

-- 
2.17.1

Comments

Matthias Kaehlcke Feb. 7, 2019, 1:57 a.m. UTC | #1
On Wed, Feb 06, 2019 at 11:34:41AM -0800, Matthias Kaehlcke wrote:
> On Wed, Feb 06, 2019 at 04:05:41PM +0530, Amit Kucheria wrote:

> > On Sat, Jan 26, 2019 at 3:50 AM Matthias Kaehlcke <mka@chromium.org> wrote:

> > > > > >                   trips {

> > > > > > -                         cpu_alert0: trip0 {

> > > > > > +                         cpu0_alert1: trip-point@0 {

> > > > > >                                   temperature = <75000>;

> > > > >

> > > > > In my observations a 'switch on/threshold' temperature of 75 degrees

> > > > > leads to aggressive throttling with IPA when the temperature is above

> > > > > this threshold:

> > > > >

> > > > > [  716.760804] cpu_cooling_ratelimit: 31 callbacks suppressed

> > > > > [  716.760836] cpu cpu4: Cooling state set to 10. New max freq = 1920000

> > > > > [  716.773390] power_allocator_ratelimit: 15 callbacks suppressed

> > > > > [  716.773405] thermal thermal_zone5: Controlling power: control_temp=95000 last_temp=73500, curr_temp=75200 total_requested_power=39025 total_granted_power=18654

> > > > > [  749.609336] cpu_cooling_ratelimit: 45 callbacks suppressed

> > > > > [  749.609371] cpu cpu4: Cooling state set to 11. New max freq = 1843200

> > > > > [  749.624300] power_allocator_ratelimit: 24 callbacks suppressed

> > > > > [  749.624323] thermal thermal_zone5: Controlling power: control_temp=95000 last_temp=70800, curr_temp=77200 total_requested_power=40136 total_granted_power=17402

> > > > > [  780.152633] cpu_cooling_ratelimit: 41 callbacks suppressed

> > > > > [  780.152666] cpu cpu4: Cooling state set to 11. New max freq = 1843200

> > > > > [  780.165247] power_allocator_ratelimit: 21 callbacks suppressed

> > > > > [  780.165261] thermal thermal_zone5: Controlling power: control_temp=95000 last_temp=64800, curr_temp=76900 total_requested_power=39719 total_granted_power=1759

> > > > >

> > > > > (the logs come from a local patch in our tree:

> > > > > https://chromium.googlesource.com/chromiumos/third_party/kernel/+/ec1c501a8093fed44a6697a5913ef2765f518e1f)

> > > > >

> > > > > At this point I don't have a clear idea what would be a reasonable

> > > > > value for the 'switch on/threshold' temperature, but probably it

> > > > > should to be higher than 75 degrees, at least with IPA. If there is

> > > > > no reasonable common configuration for different thermal governors I

> > > > > guess we'll have to target a commonly used governor and systems

> > > > > using other 'incompatible' governors need to override the config in

> > > > > their <board>.dtsi.

> > > >

> > 

> > Thanks for the elaborate testing and for sharing the numbers. This is

> > very useful information.

> > 

> > > > On my system I don't see a significant delta in core temperatures for

> > > > 'threshold' temperatures of 80, 85 or 90°C. However Dhrystone

> > > > performance goes up by ~8% when changing the trip point from 80 to

> > > > 85°C. For a switch from 85 to 90°C I see a ~2% performance delta. For

> > > > all trip points the average core temperatures are ~80°C (silver) and

> > > > ~85°C (gold). Interestingly I observed the highest average

> > > > temperatures with the trip point at 80°C (repeated measurements were

> > > > taken for different temperatures).

> > > >

> > > > Supposedly LMH throttling is disabled in the firmware I used for

> > > > these tests, however data suggests that it is still active

> > > > (temperature doesn't rise beyond 95°C, even without throttling in

> > > > Linux; Dhrystone performance drops when raising the temperature beyond

> > > > 95°C with a heat gun. I will do some more testing when I get my hands

> > > > on a FW that effectively disables LMH (or raises the threshold to

> > > > something like 105°C).

> > > >

> > > > From the data collected so far I'd suggest a 'threshold' temperature

> > > > of 90°C or if that seems to high 85°C. Behavior might be different

> > > > with other thermal governors or without LMH throttling..

> > >

> > > Some more data from measurements with different trips points, for the

> > > IPA and the Fair Share governors, LMH throttling was enabled:

> > >

> > >                         IPA

> > >         Dhrystone       Temp Silver     Temp Gold

> > > 75      6M              78.4            84.9

> > > 80      6.21M           81.4            89.8

> > > 85      6.74M           81.7            88.2

> > > 90      6.88M           79.4            84.6

> > >

> > >                         Fair Share

> > >         Dhrystone       Temp Silver     Temp Gold

> > > 75      6.63M           80.1            88.5

> > > 80      6.71M           80.1            88.5

> > > 85      6.77M           81.1            87.8

> > > 90      7.12M           81.2            87.8

> > 

> > Interesting that you get more MIPs out of fair share governor when

> > compared to IPA across the board. What devices were providing energy

> > cost information (dynamic-power-coefficient) to the IPA engine? Just

> > CPU and GPU? Can you point me to those patches in gerrit?

> 

> Only the CPUs provide energy cost information, the GPU isn't fully

> hooked up in our tree yet. The cause of the delta could be that for

> temperatures < 'target' Fair Share only uses the performance states

> specified in 'threshold' for throttling (currently only the boost

> frequency), while IPA may use the full range of states  of the

> 'target' trip point.


I saw that in v4 you allow all performance state to be used for
throttling at the 'threshold' temperature. With this configuration
I get:

               Dhrystone      Temp Silver    Temp Gold

Fair Share     7.29M	      81.4           87.7

IPA            7.14M          81.7           88.3


I have no good sense why we are seeing more MIPs for IPA than with the
previous configuration. As for earlier tests the values are the
average from 4 runs.

In any case it seems like a reasonable default configuration with the
data we have at this point.

> You can find the patches/configuration here:

> 

> https://chromium.googlesource.com/chromiumos/third_party/kernel/+log/refs/sandbox/dianders/190130-wip-tree

> 

> arch/arm64/boot/dts/qcom/sdm845.dtsi

> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi

> 

> > > Within this range the 'threshold' temperature doesn't seem to have a

> > > large impact on the average CPU temperature. There is a bit of

> > > fluctuation between individual measurements, I wouldn't be surprised

> > > if the outliers of Temp Gold for 75 and 90°C converged more with the

> > > other values with some more measurements.

> > >

> > > I learned how to effectively disable LMH throttling, however with that

> > > it was fairly easy to have the CPUs overheat, even with throttling in

> > > Linux. If it is feasible at all to run with LMH disabled some more

> > > actions will be needed (e.g. attaching a heatsink or interrupt support

> > > for thermal sensors instead of polling, ...).

> > 

> > Given that LMH kicks in at 95 and IPA manages to maintain temperatures

> > in the ballpark of 80-90 regardless of the trip point value, I agree

> > that we should move the 1st trip point to 90. This will give maximum

> > performance. So in "threshold" and "target" terms 90 becomes the

> > threshold. And since LMH kicks in at 95, I've left it as the target

> > trip.

> > 

> > These should be sane defaults for upstream and any device can override

> > those numbers in their board file.

> 

> Sounds good, thanks!

> 

> FYI, since I mentioned this earlier: a small heatsink on the SoC

> makes a huge difference, with that I didn't encounter thermal

> shutdowns during my (limited) tests with LMH disabled. Temperatures

> were only slightly higher than with LMH throttling, so it might be

> feasible to raise the LMH threshold and only use it as last resort.

> 

> Cheers

> 

> Matthias
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index c27cbd3bcb0a..878f661d16eb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -13,6 +13,7 @@ 
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -99,6 +100,7 @@ 
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
 				compatible = "cache";
@@ -114,6 +116,7 @@ 
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_100>;
 			L2_100: l2-cache {
 				compatible = "cache";
@@ -126,6 +129,7 @@ 
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_200>;
 			L2_200: l2-cache {
 				compatible = "cache";
@@ -138,6 +142,7 @@ 
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_300>;
 			L2_300: l2-cache {
 				compatible = "cache";
@@ -150,6 +155,7 @@ 
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_400>;
 			L2_400: l2-cache {
 				compatible = "cache";
@@ -162,6 +168,7 @@ 
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_500>;
 			L2_500: l2-cache {
 				compatible = "cache";
@@ -174,6 +181,7 @@ 
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_600>;
 			L2_600: l2-cache {
 				compatible = "cache";
@@ -186,6 +194,7 @@ 
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_700>;
 			L2_700: l2-cache {
 				compatible = "cache";
@@ -1691,18 +1700,41 @@ 
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				cpu_alert0: trip0 {
+				cpu0_alert1: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit0: trip1 {
+				cpu0_alert0: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu1-thermal {
@@ -1712,18 +1744,41 @@ 
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				cpu_alert1: trip0 {
+				cpu1_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit1: trip1 {
+				cpu1_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu2-thermal {
@@ -1733,18 +1788,41 @@ 
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu_alert2: trip0 {
+				cpu2_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit2: trip1 {
+				cpu2_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu3-thermal {
@@ -1754,18 +1832,41 @@ 
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				cpu_alert3: trip0 {
+				cpu3_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit3: trip1 {
+				cpu3_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu4-thermal {
@@ -1775,18 +1876,41 @@ 
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
-				cpu_alert4: trip0 {
+				cpu4_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit4: trip1 {
+				cpu4_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu5-thermal {
@@ -1796,18 +1920,41 @@ 
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				cpu_alert5: trip0 {
+				cpu5_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit5: trip1 {
+				cpu5_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu6-thermal {
@@ -1817,18 +1964,41 @@ 
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				cpu_alert6: trip0 {
+				cpu6_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit6: trip1 {
+				cpu6_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu7-thermal {
@@ -1838,18 +2008,41 @@ 
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu_alert7: trip0 {
+				cpu7_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit7: trip1 {
+				cpu7_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };