| Message ID | 1547735860-5298-1-git-send-email-igor.opaniuk@linaro.org |
|---|---|
| State | Accepted |
| Commit | 246fb9dd9c12f365bf3041547f2c4894dad4f1ab |
| Headers | show |
| Series | [v1,1/1] arm64: dt: poplar: add optee node | expand |
Hi Igor, On Thu, Jan 17, 2019 at 04:37:40PM +0200, Igor Opaniuk wrote: > As Poplar supports running TF-A with OP-TEE as BL32 > payload, add op-tee node in DT, which enables usage of > OP-TEE driver (which provides an interface for requesting services > from OP-TEE). > > Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> I'm fine with the change. But rather than pushing changes to u-boot, can you please push it to kernel repository, which is the DTS upstream right now? We sync DTS changes from kernel when needed, and only maintains u-boot specific changes in hi3798cv200-u-boot.dtsi. Shawn > --- > arch/arm/dts/hi3798cv200-poplar.dts | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/dts/hi3798cv200-poplar.dts b/arch/arm/dts/hi3798cv200-poplar.dts > index 964326e..6bc2a23 100644 > --- a/arch/arm/dts/hi3798cv200-poplar.dts > +++ b/arch/arm/dts/hi3798cv200-poplar.dts > @@ -28,6 +28,13 @@ > reg = <0x0 0x0 0x0 0x80000000>; > }; > > + firmware { > + optee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + }; > + > leds { > compatible = "gpio-leds"; > > -- > 2.7.4 >
On Thu, 17 Jan 2019 at 07:37, Igor Opaniuk <igor.opaniuk@linaro.org> wrote: > > As Poplar supports running TF-A with OP-TEE as BL32 > payload, add op-tee node in DT, which enables usage of > OP-TEE driver (which provides an interface for requesting services > from OP-TEE). > > Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> > --- > arch/arm/dts/hi3798cv200-poplar.dts | 7 +++++++ > 1 file changed, 7 insertions(+) Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/hi3798cv200-poplar.dts b/arch/arm/dts/hi3798cv200-poplar.dts index 964326e..6bc2a23 100644 --- a/arch/arm/dts/hi3798cv200-poplar.dts +++ b/arch/arm/dts/hi3798cv200-poplar.dts @@ -28,6 +28,13 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + leds { compatible = "gpio-leds";
As Poplar supports running TF-A with OP-TEE as BL32 payload, add op-tee node in DT, which enables usage of OP-TEE driver (which provides an interface for requesting services from OP-TEE). Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> --- arch/arm/dts/hi3798cv200-poplar.dts | 7 +++++++ 1 file changed, 7 insertions(+)