broonie-regulator/for-next boot bisection: v5.0-rc2-20-g61b67608c6b9 on r8a7796-m3ulcb

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index b79b757fdd41..51d38d5e776a 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -19,6 +19,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -702,9 +703,7 @@  static struct regulator_init_data bq24022_init_data = {
 	.consumer_supplies      = bq24022_consumers,
 };
 
-static struct gpio bq24022_gpios[] = {
-	{ GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
+static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
 
 static struct gpio_regulator_state bq24022_states[] = {
 	{ .value = 100000, .gpios = (0 << 0) },
@@ -714,12 +713,10 @@  static struct gpio_regulator_state bq24022_states[] = {
 static struct gpio_regulator_config bq24022_info = {
 	.supply_name = "bq24022",
 
-	.enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
-	.enable_high = 0,
 	.enabled_at_boot = 0,
 
-	.gpios = bq24022_gpios,
-	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
+	.gflags = bq24022_gpiod_gflags,
+	.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
 
 	.states = bq24022_states,
 	.nr_states = ARRAY_SIZE(bq24022_states),
@@ -736,6 +733,17 @@  static struct platform_device bq24022 = {
 	},
 };
 
+static struct gpiod_lookup_table bq24022_gpiod_table = {
+	.dev_id = "gpio-regulator",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO96_HX4700_BQ24022_ISET2,
+			    NULL, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN,
+			    "enable", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 /*
  * StrataFlash
  */
@@ -878,6 +886,7 @@  static void __init hx4700_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
+	gpiod_add_lookup_table(&bq24022_gpiod_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 08b079653c3f..6538a7c0e504 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -645,9 +645,8 @@  static struct regulator_init_data bq24022_init_data = {
 	.consumer_supplies	= bq24022_consumers,
 };
 
-static struct gpio bq24022_gpios[] = {
-	{ EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
+
+static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
 
 static struct gpio_regulator_state bq24022_states[] = {
 	{ .value = 100000, .gpios = (0 << 0) },
@@ -657,12 +656,10 @@  static struct gpio_regulator_state bq24022_states[] = {
 static struct gpio_regulator_config bq24022_info = {
 	.supply_name		= "bq24022",
 
-	.enable_gpio		= GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-	.enable_high		= 0,
 	.enabled_at_boot	= 1,
 
-	.gpios			= bq24022_gpios,
-	.nr_gpios		= ARRAY_SIZE(bq24022_gpios),
+	.gflags = bq24022_gpiod_gflags,
+	.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
 
 	.states			= bq24022_states,
 	.nr_states		= ARRAY_SIZE(bq24022_states),
@@ -679,6 +676,17 @@  static struct platform_device bq24022 = {
 	},
 };
 
+static struct gpiod_lookup_table bq24022_gpiod_table = {
+	.dev_id = "gpio-regulator",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2,
+			    NULL, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+			    "enable", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 /*
  * fixed regulator for ads7846
  */
@@ -1027,6 +1035,7 @@  static void __init magician_init(void)
 	regulator_register_always_on(0, "power", pwm_backlight_supply,
 		ARRAY_SIZE(pwm_backlight_supply), 5000000);
 
+	gpiod_add_lookup_table(&bq24022_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 }
 
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index b2f5ec4f658a..0cec163200c8 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -30,16 +30,15 @@ 
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/gpio-regulator.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 struct gpio_regulator_data {
 	struct regulator_desc desc;
 	struct regulator_dev *dev;
 
-	struct gpio *gpios;
+	struct gpio_desc **gpiods;
 	int nr_gpios;
 
 	struct gpio_regulator_state *states;
@@ -82,7 +81,7 @@  static int gpio_regulator_set_voltage(struct regulator_dev *dev,
 
 	for (ptr = 0; ptr < data->nr_gpios; ptr++) {
 		state = (target & (1 << ptr)) >> ptr;
-		gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
+		gpiod_set_value_cansleep(data->gpiods[ptr], state);
 	}
 	data->state = target;
 
@@ -119,7 +118,7 @@  static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
 
 	for (ptr = 0; ptr < data->nr_gpios; ptr++) {
 		state = (target & (1 << ptr)) >> ptr;
-		gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
+		gpiod_set_value_cansleep(data->gpiods[ptr], state);
 	}
 	data->state = target;
 
@@ -138,7 +137,8 @@  of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
 {
 	struct gpio_regulator_config *config;
 	const char *regtype;
-	int proplen, gpio, i;
+	int proplen, i;
+	int ngpios;
 	int ret;
 
 	config = devm_kzalloc(dev,
@@ -153,59 +153,36 @@  of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
 
 	config->supply_name = config->init_data->constraints.name;
 
-	if (of_property_read_bool(np, "enable-active-high"))
-		config->enable_high = true;
-
 	if (of_property_read_bool(np, "enable-at-boot"))
 		config->enabled_at_boot = true;
 
 	of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
 
-	config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
-	if (config->enable_gpio < 0 && config->enable_gpio != -ENOENT)
-		return ERR_PTR(config->enable_gpio);
-
-	/* Fetch GPIOs. - optional property*/
-	ret = of_gpio_count(np);
-	if ((ret < 0) && (ret != -ENOENT))
-		return ERR_PTR(ret);
-
-	if (ret > 0) {
-		config->nr_gpios = ret;
-		config->gpios = devm_kcalloc(dev,
-					config->nr_gpios, sizeof(struct gpio),
-					GFP_KERNEL);
-		if (!config->gpios)
+	/* Fetch GPIO init levels */
+	ngpios = gpiod_count(dev, NULL);
+	if (ngpios > 0) {
+		config->gflags = devm_kzalloc(dev,
+					      sizeof(enum gpiod_flags)
+					      * ngpios,
+					      GFP_KERNEL);
+		if (!config->gflags)
 			return ERR_PTR(-ENOMEM);
 
-		proplen = of_property_count_u32_elems(np, "gpios-states");
-		/* optional property */
-		if (proplen < 0)
-			proplen = 0;
+		for (i = 0; i < ngpios; i++) {
+			u32 val;
 
-		if (proplen > 0 && proplen != config->nr_gpios) {
-			dev_warn(dev, "gpios <-> gpios-states mismatch\n");
-			proplen = 0;
-		}
+			ret = of_property_read_u32_index(np, "gpios-states", i,
+							 &val);
 
-		for (i = 0; i < config->nr_gpios; i++) {
-			gpio = of_get_named_gpio(np, "gpios", i);
-			if (gpio < 0) {
-				if (gpio != -ENOENT)
-					return ERR_PTR(gpio);
-				break;
-			}
-			config->gpios[i].gpio = gpio;
-			config->gpios[i].label = config->supply_name;
-			if (proplen > 0) {
-				of_property_read_u32_index(np, "gpios-states",
-							   i, &ret);
-				if (ret)
-					config->gpios[i].flags =
-							   GPIOF_OUT_INIT_HIGH;
-			}
+			/* Default to high per specification */
+			if (ret)
+				config->gflags[i] = GPIOD_OUT_HIGH;
+			else
+				config->gflags[i] =
+					val ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
 		}
 	}
+	config->ngpios = ngpios;
 
 	/* Fetch states. */
 	proplen = of_property_count_u32_elems(np, "states");
@@ -255,7 +232,8 @@  static int gpio_regulator_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct gpio_regulator_data *drvdata;
 	struct regulator_config cfg = { };
-	int ptr, ret, state;
+	enum gpiod_flags gflags;
+	int ptr, ret, state, i;
 
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
 			       GFP_KERNEL);
@@ -275,26 +253,17 @@  static int gpio_regulator_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	if (config->nr_gpios != 0) {
-		drvdata->gpios = kmemdup(config->gpios,
-					 config->nr_gpios * sizeof(struct gpio),
-					 GFP_KERNEL);
-		if (drvdata->gpios == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate gpio data\n");
-			ret = -ENOMEM;
-			goto err_name;
-		}
-
-		drvdata->nr_gpios = config->nr_gpios;
-		ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
-		if (ret) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(&pdev->dev,
-					"Could not obtain regulator setting GPIOs: %d\n",
-					ret);
-			goto err_memgpio;
-		}
+	for (i = 0; i < config->ngpios; i++) {
+		drvdata->gpiods[i] = devm_gpiod_get_index(&pdev->dev,
+							  NULL,
+							  i,
+							  config->gflags[i]);
+		if (IS_ERR(drvdata->gpiods[i]))
+			return PTR_ERR(drvdata->gpiods[i]);
+		/* This is good to know */
+		gpiod_set_consumer_name(drvdata->gpiods[i], drvdata->desc.name);
 	}
+	drvdata->nr_gpios = config->ngpios;
 
 	drvdata->states = kmemdup(config->states,
 				  config->nr_states *
@@ -303,7 +272,7 @@  static int gpio_regulator_probe(struct platform_device *pdev)
 	if (drvdata->states == NULL) {
 		dev_err(&pdev->dev, "Failed to allocate state data\n");
 		ret = -ENOMEM;
-		goto err_stategpio;
+		goto err_name;
 	}
 	drvdata->nr_states = config->nr_states;
 
@@ -330,7 +299,7 @@  static int gpio_regulator_probe(struct platform_device *pdev)
 	/* build initial state from gpio init data. */
 	state = 0;
 	for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
-		if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH)
+		if (config->gflags[ptr] == GPIOD_OUT_HIGH)
 			state |= (1 << ptr);
 	}
 	drvdata->state = state;
@@ -340,21 +309,19 @@  static int gpio_regulator_probe(struct platform_device *pdev)
 	cfg.driver_data = drvdata;
 	cfg.of_node = np;
 
-	if (gpio_is_valid(config->enable_gpio)) {
-		cfg.ena_gpio = config->enable_gpio;
-		cfg.ena_gpio_initialized = true;
-	}
-	cfg.ena_gpio_invert = !config->enable_high;
-	if (config->enabled_at_boot) {
-		if (config->enable_high)
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
-		else
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
-	} else {
-		if (config->enable_high)
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
-		else
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+	/*
+	 * The signal will be inverted by the GPIO core if flagged so in the
+	 * decriptor.
+	 */
+	if (config->enabled_at_boot)
+		gflags = GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE;
+	else
+		gflags = GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE;
+
+	cfg.ena_gpiod = gpiod_get_optional(&pdev->dev, "enable", gflags);
+	if (IS_ERR(cfg.ena_gpiod)) {
+		ret = PTR_ERR(cfg.ena_gpiod);
+		goto err_memstate;
 	}
 
 	drvdata->dev = regulator_register(&drvdata->desc, &cfg);
@@ -370,10 +337,6 @@  static int gpio_regulator_probe(struct platform_device *pdev)
 
 err_memstate:
 	kfree(drvdata->states);
-err_stategpio:
-	gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
-err_memgpio:
-	kfree(drvdata->gpios);
 err_name:
 	kfree(drvdata->desc.name);
 	return ret;
@@ -384,12 +347,7 @@  static int gpio_regulator_remove(struct platform_device *pdev)
 	struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev);
 
 	regulator_unregister(drvdata->dev);
-
-	gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
-
 	kfree(drvdata->states);
-	kfree(drvdata->gpios);
-
 	kfree(drvdata->desc.name);
 
 	return 0;
diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h
index 19fbd267406d..49c407afb944 100644
--- a/include/linux/regulator/gpio-regulator.h
+++ b/include/linux/regulator/gpio-regulator.h
@@ -21,6 +21,8 @@ 
 #ifndef __REGULATOR_GPIO_H
 #define __REGULATOR_GPIO_H
 
+#include <linux/gpio/consumer.h>
+
 struct regulator_init_data;
 
 enum regulator_type;
@@ -53,9 +55,9 @@  struct gpio_regulator_state {
  *			This is used to keep the regulator at
  *			the default state
  * @startup_delay:	Start-up time in microseconds
- * @gpios:		Array containing the gpios needed to control
- *			the setting of the regulator
- * @nr_gpios:		Number of gpios
+ * @gflags:		Array of GPIO configuration flags for initial
+ *			states
+ * @ngpios:		Number of GPIOs and configurations available
  * @states:		Array of gpio_regulator_state entries describing
  *			the gpio state for specific voltages
  * @nr_states:		Number of states available
@@ -74,8 +76,8 @@  struct gpio_regulator_config {
 	unsigned enabled_at_boot:1;
 	unsigned startup_delay;
 
-	struct gpio *gpios;
-	int nr_gpios;
+	enum gpiod_flags *gflags;
+	int ngpios;
 
 	struct gpio_regulator_state *states;
 	int nr_states;