@@ -9,7 +9,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
@@ -136,7 +136,16 @@ static struct platform_device at2440evb_device_eth = {
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
- .gpio_detect = S3C2410_GPG(10),
+ /* Intentionally left blank */
+};
+
+static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPG(10) */
+ GPIO_LOOKUP("GPG", 10, "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
};
/* 7" LCD panel */
@@ -200,6 +209,7 @@ static void __init at2440evb_init_time(void)
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+ gpiod_add_lookup_table(&at2440evb_mci_gpio_table);
s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
s3c_nand_set_platdata(&at2440evb_nand_info);
s3c_i2c0_set_platdata(NULL);
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/pwm.h>
@@ -459,12 +460,21 @@ static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
}
static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPF(5),
- .gpio_wprotect = S3C2410_GPH(8),
.set_power = h1940_set_mmc_power,
.ocr_avail = MMC_VDD_32_33,
};
+static struct gpiod_lookup_table h1940_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPF(5) */
+ GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect S3C2410_GPH(8) */
+ GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct pwm_lookup h1940_pwm_lookup[] = {
PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
PWM_POLARITY_NORMAL),
@@ -680,6 +690,7 @@ static void __init h1940_init(void)
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
+ gpiod_add_lookup_table(&h1940_mmc_gpio_table);
s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
@@ -15,6 +15,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/serial_core.h>
@@ -234,13 +235,22 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
/* MMC/SD */
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPG(8),
- .gpio_wprotect = S3C2410_GPH(8),
.wprotect_invert = 1,
.set_power = NULL,
.ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
+static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPG(8) */
+ GPIO_LOOKUP("GPG", 8, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect S3C2410_GPH(8) */
+ GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/* NAND Flash on MINI2440 board */
static struct mtd_partition mini2440_default_nand_part[] __initdata = {
@@ -696,6 +706,7 @@ static void __init mini2440_init(void)
}
s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+ gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
s3c_nand_set_platdata(&mini2440_nand_info);
s3c_i2c0_set_platdata(NULL);
@@ -17,6 +17,7 @@
#include <linux/gpio_keys.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
@@ -350,12 +351,21 @@ static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
}
static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
- .gpio_detect = S3C2410_GPF(1),
- .gpio_wprotect = S3C2410_GPG(10),
.ocr_avail = MMC_VDD_32_33,
.set_power = n30_sdi_set_power,
};
+static struct gpiod_lookup_table n30_mci_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPF(1) */
+ GPIO_LOOKUP("GPF", 1, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect S3C2410_GPG(10) */
+ GPIO_LOOKUP("GPG", 10, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct platform_device *n30_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
@@ -549,6 +559,7 @@ static void __init n30_init(void)
s3c24xx_fb_set_platdata(&n30_fb_info);
s3c24xx_udc_set_platdata(&n30_udc_cfg);
+ gpiod_add_lookup_table(&n30_mci_gpio_table);
s3c24xx_mci_set_platdata(&n30_mci_cfg);
s3c_i2c0_set_platdata(&n30_i2ccfg);
@@ -14,6 +14,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
@@ -558,12 +559,21 @@ static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
}
static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPF(5),
- .gpio_wprotect = S3C2410_GPH(8),
.set_power = rx1950_set_mmc_power,
.ocr_avail = MMC_VDD_32_33,
};
+static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPF(5) */
+ GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect S3C2410_GPH(8) */
+ GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct mtd_partition rx1950_nand_part[] = {
[0] = {
.name = "Boot0",
@@ -762,6 +772,7 @@ static void __init rx1950_init_machine(void)
s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+ gpiod_add_lookup_table(&rx1950_mmc_gpio_table);
s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
s3c_i2c0_set_platdata(NULL);
s3c_nand_set_platdata(&rx1950_nand_info);
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/mmc/slot-gpio.h>
#include <plat/gpio-cfg.h>
@@ -1545,25 +1544,19 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host)
if (pdata->wprotect_invert)
mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
- if (pdata->detect_invert)
- mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
-
- if (gpio_is_valid(pdata->gpio_detect)) {
- ret = mmc_gpio_request_cd(mmc, pdata->gpio_detect, 0);
- if (ret) {
- dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
- ret);
- return ret;
- }
+ /* If we get -ENOENT we have no card detect GPIO line */
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ if (ret != -ENOENT) {
+ dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
+ ret);
+ return ret;
}
- if (gpio_is_valid(pdata->gpio_wprotect)) {
- ret = mmc_gpio_request_ro(mmc, pdata->gpio_wprotect);
- if (ret) {
- dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
- ret);
- return ret;
- }
+ ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL);
+ if (ret != -ENOENT) {
+ dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
+ ret);
+ return ret;
}
return 0;
@@ -7,7 +7,6 @@
* @no_wprotect: Set this to indicate there is no write-protect switch.
* @no_detect: Set this if there is no detect switch.
* @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
* @use_dma: Set to allow the use of DMA.
* @gpio_detect: GPIO number for the card detect line.
* @gpio_wprotect: GPIO number for the write protect line.
@@ -31,11 +30,8 @@ struct s3c24xx_mci_pdata {
unsigned int no_wprotect:1;
unsigned int no_detect:1;
unsigned int wprotect_invert:1;
- unsigned int detect_invert:1; /* set => detect active high */
unsigned int use_dma:1;
- unsigned int gpio_detect;
- unsigned int gpio_wprotect;
unsigned long ocr_avail;
void (*set_power)(unsigned char power_mode,
unsigned short vdd);