@@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o pinmux.o
+COBJS += clock.o power.o soc.o system.o pinmux.o tzpc_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
new file mode 100644
@@ -0,0 +1,48 @@
+/*
+ * Lowlevel setup for SMDK5250 board based on S5PC520
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/tzpc.h>
+#include <asm/io.h>
+
+/* Setting TZPC[TrustZone Protection Controller] */
+void tzpc_init(void)
+{
+ struct exynos_tzpc *tzpc;
+ unsigned int addr;
+
+ for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
+ tzpc = (struct exynos_tzpc *)addr;
+
+ if (addr == TZPC0_BASE)
+ writel(R0SIZE, &tzpc->r0size);
+
+ writel(DECPROTXSET, &tzpc->decprot0set);
+ writel(DECPROTXSET, &tzpc->decprot1set);
+
+ if (addr != TZPC9_BASE) {
+ writel(DECPROTXSET, &tzpc->decprot2set);
+ writel(DECPROTXSET, &tzpc->decprot3set);
+ }
+ }
+}
@@ -47,6 +47,34 @@ struct exynos_tzpc {
unsigned int pcellid2;
unsigned int pcellid3;
};
+
+/* TZPC : Register Offsets */
+#define TZPC0_BASE 0x10100000
+#define TZPC1_BASE 0x10110000
+#define TZPC2_BASE 0x10120000
+#define TZPC3_BASE 0x10130000
+#define TZPC4_BASE 0x10140000
+#define TZPC5_BASE 0x10150000
+#define TZPC6_BASE 0x10160000
+#define TZPC7_BASE 0x10170000
+#define TZPC8_BASE 0x10180000
+#define TZPC9_BASE 0x10190000
+
+#define TZPC_BASE_OFFSET 0x10000
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE 0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET 0xFF
+void tzpc_init(void);
+
#endif
#endif
@@ -28,7 +28,6 @@ SOBJS := lowlevel_init.o
COBJS := clock_init.o
COBJS += dmc_common.o dmc_init_ddr3.o
-COBJS += tzpc_init.o
COBJS += smdk5250_spl.o
ifndef CONFIG_SPL_BUILD
@@ -28,18 +28,6 @@
#include <config.h>
#include <asm/arch/dmc.h>
-/* TZPC : Register Offsets */
-#define TZPC0_BASE 0x10100000
-#define TZPC1_BASE 0x10110000
-#define TZPC2_BASE 0x10120000
-#define TZPC3_BASE 0x10130000
-#define TZPC4_BASE 0x10140000
-#define TZPC5_BASE 0x10150000
-#define TZPC6_BASE 0x10160000
-#define TZPC7_BASE 0x10170000
-#define TZPC8_BASE 0x10180000
-#define TZPC9_BASE 0x10190000
-
/* APLL_CON1 */
#define APLL_CON1_VAL (0x00203800)
@@ -458,18 +446,6 @@
/* CLK_GATE_IP_DISP1 */
#define CLK_GATE_DP1_ALLOW (1 << 4)
-/*
- * TZPC Register Value :
- * R0SIZE: 0x0 : Size of secured ram
- */
-#define R0SIZE 0x0
-
-/*
- * TZPC Decode Protection Register Value :
- * DECPROTXSET: 0xFF : Set Decode region to non-secure
- */
-#define DECPROTXSET 0xFF
-
#define DDR3PHY_CTRL_PHY_RESET (1 << 0)
#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0)
@@ -590,5 +566,4 @@ void update_reset_dll(struct exynos5_dmc *, enum ddr_mode);
void sdelay(unsigned long);
void mem_ctrl_init(void);
void system_clock_init(void);
-void tzpc_init(void);
#endif
deleted file mode 100644
@@ -1,48 +0,0 @@
-/*
- * Lowlevel setup for SMDK5250 board based on S5PC520
- *
- * Copyright (C) 2012 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/tzpc.h>
-#include"setup.h"
-
-/* Setting TZPC[TrustZone Protection Controller] */
-void tzpc_init(void)
-{
- struct exynos_tzpc *tzpc;
- unsigned int addr;
-
- for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
- tzpc = (struct exynos_tzpc *)addr;
-
- if (addr == TZPC0_BASE)
- writel(R0SIZE, &tzpc->r0size);
-
- writel(DECPROTXSET, &tzpc->decprot0set);
- writel(DECPROTXSET, &tzpc->decprot1set);
-
- if (addr != TZPC9_BASE) {
- writel(DECPROTXSET, &tzpc->decprot2set);
- writel(DECPROTXSET, &tzpc->decprot3set);
- }
- }
-}
@@ -88,8 +88,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS
-#define TZPC_BASE_OFFSET 0x10000
-
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
tzpc_init is common for all exynos5 boards, hence move it to armv7/exynos so that all other boards can use it. Also update the smdk5250 Makefile and config file. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> --- arch/arm/cpu/armv7/exynos/Makefile | 2 +- arch/arm/cpu/armv7/exynos/tzpc_init.c | 48 +++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/tzpc.h | 28 ++++++++++++++++++ board/samsung/smdk5250/Makefile | 1 - board/samsung/smdk5250/setup.h | 25 ---------------- board/samsung/smdk5250/tzpc_init.c | 48 ------------------------------- include/configs/exynos5250-dt.h | 2 -- 7 files changed, 77 insertions(+), 77 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/tzpc_init.c delete mode 100644 board/samsung/smdk5250/tzpc_init.c