@@ -12,6 +12,7 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/delay.h>
#include <linux/platform_data/rtc-v3020.h>
@@ -294,8 +295,18 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
.gpio_power_invert = 1,
};
+static struct gpiod_lookup_table cmx270_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 83 */
+ GPIO_LOOKUP("gpio-pxa", 83, "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init cmx270_init_mmc(void)
{
+ gpiod_add_lookup_table(&cmx270_mci_gpio_table);
pxa_set_mci_info(&cmx270_mci_platform_data);
}
#else
@@ -464,6 +464,17 @@ static struct pxamci_platform_data cm_x300_mci_platform_data = {
.gpio_power = -1,
};
+static struct gpiod_lookup_table cm_x300_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 82 */
+ GPIO_LOOKUP("gpio-pxa", 82, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 85 */
+ GPIO_LOOKUP("gpio-pxa", 85, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
no detection/ro pins */
static int cm_x300_mci2_init(struct device *dev,
@@ -489,6 +500,7 @@ static struct pxamci_platform_data cm_x300_mci2_platform_data = {
static void __init cm_x300_init_mmc(void)
{
+ gpiod_add_lookup_table(&cm_x300_mci_gpio_table);
pxa_set_mci_info(&cm_x300_mci_platform_data);
pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
}
@@ -14,7 +14,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
@@ -42,17 +42,47 @@ static struct pxamci_platform_data colibri_mci_platform_data = {
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table colibri_pxa270_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO0_COLIBRI_PXA270_SD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table colibri_pxa300_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO13_COLIBRI_PXA300_SD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table colibri_pxa320_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO28_COLIBRI_PXA320_SD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init colibri_mmc_init(void)
{
if (machine_is_colibri()) /* PXA270 Colibri */
colibri_mci_platform_data.gpio_card_detect =
GPIO0_COLIBRI_PXA270_SD_DETECT;
+ gpiod_add_lookup_table(&colibri_pxa270_mci_gpio_table);
if (machine_is_colibri300()) /* PXA300 Colibri */
colibri_mci_platform_data.gpio_card_detect =
GPIO13_COLIBRI_PXA300_SD_DETECT;
+ gpiod_add_lookup_table(&colibri_pxa300_mci_gpio_table);
else /* PXA320 Colibri */
colibri_mci_platform_data.gpio_card_detect =
GPIO28_COLIBRI_PXA320_SD_DETECT;
+ gpiod_add_lookup_table(&colibri_pxa320_mci_gpio_table);
pxa_set_mci_info(&colibri_mci_platform_data);
}
@@ -14,7 +14,7 @@
#include <linux/bitops.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/leds.h>
@@ -57,8 +57,20 @@ static struct pxamci_platform_data income_mci_platform_data = {
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table income_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 0 */
+ GPIO_LOOKUP("gpio-pxa", 0, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 1 */
+ GPIO_LOOKUP("gpio-pxa", 1, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init income_mmc_init(void)
{
+ gpiod_add_lookup_table(&income_mci_gpio_table);
pxa_set_mci_info(&income_mci_platform_data);
}
#else
@@ -24,6 +24,7 @@
#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/backlight.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-pxa.h>
@@ -498,6 +499,18 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
.gpio_power = CORGI_GPIO_SD_PWR,
};
+static struct gpiod_lookup_table corgi_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 9 */
+ GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 7 */
+ GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
/*
* Irda
@@ -731,6 +744,7 @@ static void __init corgi_init(void)
corgi_init_spi();
pxa_set_udc_info(&udc_info);
+ gpiod_add_lookup_table(&corgi_mci_gpio_table);
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
@@ -134,6 +134,19 @@ static struct pxamci_platform_data csb726_mci = {
.gpio_power = -1,
};
+static struct gpiod_lookup_table csb726_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 100 */
+ GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 101 */
+ GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_RO,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct pxaohci_platform_data csb726_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.flags = ENABLE_PORT1 | NO_OC_PROTECTION,
@@ -264,6 +277,7 @@ static void __init csb726_init(void)
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
pxa27x_set_i2c_power_info(NULL);
+ gpiod_add_lookup_table(&csb726_mci_gpio_table);
pxa_set_mci_info(&csb726_mci);
pxa_set_ohci_info(&csb726_ohci_platform_data);
pxa_set_ac97_info(NULL);
@@ -20,6 +20,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/mfd/da903x.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -546,6 +547,15 @@ static inline void em_x270_init_ohci(void) {}
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static struct regulator *em_x270_sdio_ldo;
+static struct gpiod_lookup_table em_x270_mci_wp_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Write protect on GPIO 95 */
+ GPIO_LOOKUP("gpio-pxa", GPIO95_MMC_WP, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
@@ -644,6 +654,7 @@ static void __init em_x270_init_mmc(void)
{
if (machine_is_em_x270())
em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+ gpiod_add_lookup_table(&em_x270_mci_wp_gpio_table);
pxa_set_mci_info(&em_x270_mci_platform_data);
}
@@ -20,7 +20,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/smc91x.h>
@@ -283,8 +283,18 @@ static struct pxamci_platform_data littleton_mci_platform_data = {
.gpio_power = -1,
};
+static struct gpiod_lookup_table littleton_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on MFP (gpio-pxa) GPIO 15 */
+ GPIO_LOOKUP("gpio-pxa", 15, "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init littleton_init_mmc(void)
{
+ gpiod_add_lookup_table(&littleton_mci_gpio_table);
pxa_set_mci_info(&littleton_mci_platform_data);
}
#else
@@ -781,6 +781,18 @@ static struct pxamci_platform_data magician_mci_info = {
.gpio_power = EGPIO_MAGICIAN_SD_POWER,
};
+static struct gpiod_lookup_table magician_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /*
+ * Write protect on EGPIO register 5 index 4, this is
+ * on the second HTC EGPIO chip which starts at regiser
+ * 4, so we need offset 8+4=12 on that particular chip.
+ */
+ GPIO_LOOKUP("htc-egpio-1", 12, "wp", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
/*
* USB OHCI
@@ -979,6 +991,7 @@ static void __init magician_init(void)
i2c_register_board_info(1,
ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+ gpiod_add_lookup_table(&magician_mci_gpio_table);
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
pxa_set_udc_info(&magician_udc_info);
@@ -31,6 +31,7 @@
#include <linux/rtc.h>
#include <linux/leds.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pda_power.h>
@@ -402,6 +403,17 @@ static struct pxamci_platform_data mioa701_mci_info = {
.gpio_power = GPIO91_SDIO_EN,
};
+static struct gpiod_lookup_table mioa701_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 15 */
+ GPIO_LOOKUP("gpio-pxa", 15, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 78 */
+ GPIO_LOOKUP("gpio-pxa", 78, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
/* FlashRAM */
static struct resource docg3_resource = {
.start = PXA_CS0_PHYS,
@@ -743,6 +755,7 @@ static void __init mioa701_machine_init(void)
pr_err("MioA701: Failed to request GPIOs: %d", rc);
bootstrap_init();
pxa_set_fb_info(NULL, &mioa701_pxafb_info);
+ gpiod_add_lookup_table(&mioa701_mci_gpio_table);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
pxa_set_udc_info(&mioa701_udc_info);
@@ -21,7 +21,7 @@
#include <linux/serial_8250.h>
#include <linux/dm9000.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/mtd-nand-pxa3xx.h>
@@ -331,8 +331,20 @@ static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
.gpio_power = -1
};
+static struct gpiod_lookup_table mxm_8x10_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 72 */
+ GPIO_LOOKUP("gpio-pxa", 72, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 84 */
+ GPIO_LOOKUP("gpio-pxa", 84, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
void __init mxm_8x10_mmc_init(void)
{
+ gpiod_add_lookup_table(&mxm_8x10_mci_gpio_table);
pxa_set_mci_info(&mxm_8x10_mci_platform_data);
}
#endif
@@ -126,8 +126,20 @@ static struct pxamci_platform_data palmtc_mci_platform_data = {
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table palmtc_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init palmtc_mmc_init(void)
{
+ gpiod_add_lookup_table(&palmtc_mci_gpio_table);
pxa_set_mci_info(&palmtc_mci_platform_data);
}
#else
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
#include <linux/input.h>
#include <linux/pda_power.h>
#include <linux/pwm.h>
@@ -106,6 +107,17 @@ static struct pxamci_platform_data palmte2_mci_platform_data = {
.gpio_power = GPIO_NR_PALMTE2_SD_POWER,
};
+static struct gpiod_lookup_table palmte2_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
/******************************************************************************
* GPIO keys
@@ -354,6 +366,7 @@ static void __init palmte2_init(void)
pxa_set_stuart_info(NULL);
pxa_set_fb_info(NULL, &palmte2_lcd_screen);
+ gpiod_add_lookup_table(&palmte2_mci_gpio_table);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
pxa_set_ac97_info(&palmte2_ac97_pdata);
@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/regulator/machine.h>
@@ -293,6 +294,16 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
.gpio_power = -1,
};
+static struct gpiod_lookup_table poodle_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
/*
* Irda
@@ -439,6 +450,7 @@ static void __init poodle_init(void)
pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
pxa_set_udc_info(&udc_info);
+ gpiod_add_lookup_table(&poodle_mci_gpio_table);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/leds.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-pxa.h>
@@ -620,8 +621,20 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
.gpio_power = -1,
};
+static struct gpiod_lookup_table spitz_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init spitz_mmc_init(void)
{
+ gpiod_add_lookup_table(&spitz_mci_gpio_table);
pxa_set_mci_info(&spitz_mci_platform_data);
}
#else
@@ -31,6 +31,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/power/gpio-charger.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
@@ -296,6 +297,17 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
.gpio_power = TOSA_GPIO_PWR_ON,
};
+static struct gpiod_lookup_table tosa_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_nSD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_SD_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
/*
* Irda
*/
@@ -908,6 +920,7 @@ static void __init tosa_init(void)
/* enable batt_fault */
PMCR = 0x01;
+ gpiod_add_lookup_table(&tosa_mci_gpio_table);
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
@@ -17,6 +17,7 @@
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -246,8 +247,20 @@ static struct pxamci_platform_data vpac270_mci_platform_data = {
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table vpac270_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO53_VPAC270_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO52_VPAC270_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init vpac270_mmc_init(void)
{
+ gpiod_add_lookup_table(&vpac270_mci_gpio_table);
pxa_set_mci_info(&vpac270_mci_platform_data);
}
#else
@@ -27,6 +27,7 @@
#include <linux/power_supply.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
#include <linux/regulator/machine.h>
@@ -296,8 +297,18 @@ static struct pxamci_platform_data z2_mci_platform_data = {
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table z2_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO96_ZIPITZ2_SD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init z2_mmc_init(void)
{
+ gpiod_add_lookup_table(&z2_mci_gpio_table);
pxa_set_mci_info(&z2_mci_platform_data);
}
#else
@@ -669,6 +669,17 @@ static struct pxamci_platform_data zeus_mci_platform_data = {
.gpio_power = -1
};
+static struct gpiod_lookup_table zeus_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", ZEUS_MMC_CD_GPIO,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", ZEUS_MMC_WP_GPIO,
+ "wp", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/*
* USB Device Controller
*/
@@ -883,6 +894,7 @@ static void __init zeus_init(void)
else
pxa_set_fb_info(NULL, &zeus_fb_info);
+ gpiod_add_lookup_table(&zeus_mci_gpio_table);
pxa_set_mci_info(&zeus_mci_platform_data);
pxa_set_udc_info(&zeus_udc_info);
pxa_set_ac97_info(&zeus_ac97_info);
@@ -19,7 +19,7 @@
#include <linux/leds.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
@@ -232,6 +232,15 @@ static struct pxamci_platform_data zylonite_mci_platform_data = {
.gpio_power = -1,
};
+static struct gpiod_lookup_table zylonite_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("i2c-pca9539-a", 0, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("i2c-pca9539-a", 2, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct pxamci_platform_data zylonite_mci2_platform_data = {
.detect_delay_ms= 200,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
@@ -240,6 +249,15 @@ static struct pxamci_platform_data zylonite_mci2_platform_data = {
.gpio_power = -1,
};
+static struct gpiod_lookup_table zylonite_mci2_gpio_table = {
+ .dev_id = "pxa2xx-mci.1",
+ .table = {
+ GPIO_LOOKUP("i2c-pca9539-a", 1, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("i2c-pca9539-a", 3, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct pxamci_platform_data zylonite_mci3_platform_data = {
.detect_delay_ms= 200,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
@@ -248,12 +266,25 @@ static struct pxamci_platform_data zylonite_mci3_platform_data = {
.gpio_power = -1,
};
+static struct gpiod_lookup_table zylonite_mci3_gpio_table = {
+ .dev_id = "pxa2xx-mci.2",
+ .table = {
+ GPIO_LOOKUP("i2c-pca9539-a", 30, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("i2c-pca9539-a", 31, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init zylonite_init_mmc(void)
{
+ gpiod_add_lookup_table(&zylonite_mci_gpio_table);
pxa_set_mci_info(&zylonite_mci_platform_data);
+ gpiod_add_lookup_table(&zylonite_mci2_gpio_table);
pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
- if (cpu_is_pxa310())
+ if (cpu_is_pxa310()) {
+ gpiod_add_lookup_table(&zylonite_mci3_gpio_table);
pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
+ }
}
#else
static inline void zylonite_init_mmc(void) {}
@@ -230,11 +230,13 @@ static struct pca953x_platform_data gpio_exp[] = {
static struct i2c_board_info zylonite_i2c_board_info[] = {
{
.type = "pca9539",
+ .dev_name = "pca9539-a",
.addr = 0x74,
.platform_data = &gpio_exp[0],
.irq = PXA_GPIO_TO_IRQ(18),
}, {
.type = "pca9539",
+ .dev_name = "pca9539-b",
.addr = 0x75,
.platform_data = &gpio_exp[1],
.irq = PXA_GPIO_TO_IRQ(19),
This adds GPIO descriptor look-up tables for a whole bunch of PXA boards with MMC card detect (CD) and write protect (WP) GPIO lines, so we can move away from the hard-coded GPIO numberspace. In some cases the platforms were compulsively including the <linux/gpio.h> header even if they weren't actually using it, and in these cases I simply replaced that inclusion with the more appropriate <linux/gpio/machine.h> which is what board files should be including most of the time. Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v3: - Split out as separate patch at Robert's request. --- arch/arm/mach-pxa/cm-x270.c | 11 +++++++ arch/arm/mach-pxa/cm-x300.c | 12 ++++++++ arch/arm/mach-pxa/colibri-evalboard.c | 32 ++++++++++++++++++++- arch/arm/mach-pxa/colibri-pxa270-income.c | 14 ++++++++- arch/arm/mach-pxa/corgi.c | 14 +++++++++ arch/arm/mach-pxa/csb726.c | 16 ++++++++++- arch/arm/mach-pxa/em-x270.c | 11 +++++++ arch/arm/mach-pxa/littleton.c | 12 +++++++- arch/arm/mach-pxa/magician.c | 13 +++++++++ arch/arm/mach-pxa/mioa701.c | 13 +++++++++ arch/arm/mach-pxa/mxm8x10.c | 14 ++++++++- arch/arm/mach-pxa/palmtc.c | 12 ++++++++ arch/arm/mach-pxa/palmte2.c | 13 +++++++++ arch/arm/mach-pxa/poodle.c | 12 ++++++++ arch/arm/mach-pxa/spitz.c | 13 +++++++++ arch/arm/mach-pxa/tosa.c | 13 +++++++++ arch/arm/mach-pxa/vpac270.c | 13 +++++++++ arch/arm/mach-pxa/z2.c | 11 +++++++ arch/arm/mach-pxa/zeus.c | 12 ++++++++ arch/arm/mach-pxa/zylonite.c | 35 +++++++++++++++++++++-- arch/arm/mach-pxa/zylonite_pxa300.c | 2 ++ 21 files changed, 291 insertions(+), 7 deletions(-) -- 2.19.1