diff mbox series

[v2] arm64: dts: rockchip: Add DT for nanopc-t4

Message ID 20181123074744.11583-1-tomeu.vizoso@collabora.com
State New
Headers show
Series [v2] arm64: dts: rockchip: Add DT for nanopc-t4 | expand

Commit Message

Tomeu Vizoso Nov. 23, 2018, 7:46 a.m. UTC
This adds a device tree for the NanoPC-T4 SBC, which is based on the
Rockchip RK3399 SoC and marketed by FriendlyELEC.

Known working:

- Serial
- Ethernet
- HDMI
- USB 2.0

All of the interesting stuff is in a .dtsi because there are at least
two other boards that share most of it: NanoPi M4 and NanoPi NEO4.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>


---

v2: - Rename compatible from friendlyelec to friendlyarm, to match
      existing bindings
    - Remove superfluous node spi1
---
 .../devicetree/bindings/arm/rockchip.txt      |   4 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3399-nanopc-t4.dts    |  18 +
 .../boot/dts/rockchip/rk3399-nanopi4.dtsi     | 770 ++++++++++++++++++
 4 files changed, 793 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi

-- 
2.19.1

Comments

Heiko Stuebner Nov. 23, 2018, 12:31 p.m. UTC | #1
Hi Tomeu,

Am Freitag, 23. November 2018, 08:46:30 CET schrieb Tomeu Vizoso:
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt

> index 0cc71236d639..e907d309486e 100644

> --- a/Documentation/devicetree/bindings/arm/rockchip.txt

> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt

> @@ -71,6 +71,10 @@ Rockchip platforms device tree bindings

>      Required root node properties:

>        - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";

>  

> +- FriendlyElec NanoPC-T4 board:

> +    Required root node properties:

> +      - compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";

> +


alphabetical please

>  - ChipSPARK PopMetal-RK3288 board:

>      Required root node properties:

>        - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";

> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile

> index 49042c477870..ed90cd1e5a8b 100644

> --- a/arch/arm64/boot/dts/rockchip/Makefile

> +++ b/arch/arm64/boot/dts/rockchip/Makefile

> @@ -20,3 +20,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb

>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb

>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb

>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb

> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb


alphabetical please

> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi

> new file mode 100644

> index 000000000000..148f85b4bd49

> --- /dev/null

> +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi


[...]

General comment about regulators, the vendor-kernel dts' regularly
don't model regulators in a nice way representing the hardware.

There is obviously schematics available for the board
http://wiki.friendlyarm.com/wiki/images/d/dd/NanoPi-M4-2GB-1807-Schematic.pdf

Please model the regulator tree following the naming scheme from the
schematics and including correct supply chaining, so that
$debug/regulator/regulator_summary looks nice.

This makes it way easier to find issues later on if needed and represents
the hardware in a correct way.

I guess in the end it should look pretty similar to the rock960 or other
rk3399 boards (except gru), as most boards follow the reference schematics
for a big part.

> +	vcc3v3_sys: vcc3v3-sys {

> +		compatible = "regulator-fixed";

> +		regulator-name = "vcc3v3_sys";

> +		regulator-always-on;

> +		regulator-boot-on;

> +		regulator-min-microvolt = <3300000>;

> +		regulator-max-microvolt = <3300000>;

> +	};

> +

> +	vcc5v0_host: vcc5v0-host-regulator {

> +		compatible = "regulator-fixed";

> +		regulator-name = "vcc5v0_host";

> +		regulator-always-on;

> +		regulator-boot-on;

> +		regulator-min-microvolt = <5000000>;

> +		regulator-max-microvolt = <5000000>;

> +	};

> +

> +	vcc5v0_sys: vcc5v0-sys {

> +		compatible = "regulator-fixed";

> +		regulator-name = "vcc5v0_sys";

> +		regulator-always-on;

> +		regulator-boot-on;

> +		regulator-min-microvolt = <5000000>;

> +		regulator-max-microvolt = <5000000>;

> +	};

> +

> +	vccadc_ref: vccadc-ref {

> +		compatible = "regulator-fixed";

> +		regulator-name = "vcc1v8_sys";

> +		regulator-always-on;

> +		regulator-boot-on;

> +		regulator-min-microvolt = <1800000>;

> +		regulator-max-microvolt = <1800000>;

> +	};

> +

> +	vcc_sd: vcc-sd {

> +		compatible = "regulator-fixed";

> +		enable-active-high;

> +		gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;

> +		pinctrl-names = "default";

> +		pinctrl-0 = <&vcc_sd_h>;

> +		regulator-name = "vcc_sd";

> +		regulator-min-microvolt = <3000000>;

> +		regulator-max-microvolt = <3000000>;

> +	};

> +

> +	vcc_phy: vcc-phy-regulator {

> +		compatible = "regulator-fixed";

> +		regulator-name = "vcc_phy";

> +		regulator-always-on;

> +		regulator-boot-on;

> +	};

> +

> +	vcc_lcd: vcc-lcd {

> +		compatible = "regulator-fixed";

> +		regulator-name = "vcc_lcd";

> +		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;

> +		startup-delay-us = <20000>;

> +		enable-active-high;

> +		regulator-min-microvolt = <3300000>;

> +		regulator-max-microvolt = <3300000>;

> +		regulator-boot-on;

> +		vin-supply = <&vcc5v0_sys>;

> +	};

> +

> +	vcc5v0_typec: vcc5v0-typec-regulator {

> +		compatible = "regulator-fixed";

> +		enable-active-high;

> +		gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;

> +		regulator-name = "vcc5v0_typec";

> +		regulator-always-on;

> +		vin-supply = <&vcc5v0_sys>;

> +	};

> +

> +	vdd_log: vdd-log {

> +		compatible = "pwm-regulator";

> +		pwms = <&pwm2 0 25000 1>;

> +		regulator-name = "vdd_log";

> +		regulator-min-microvolt = <800000>;

> +		regulator-max-microvolt = <1400000>;

> +		regulator-always-on;

> +		regulator-boot-on;

> +

> +		/* for rockchip boot on */

> +		rockchip,pwm_id = <2>;

> +		rockchip,pwm_voltage = <900000>;

> +	};


you might want to drop vdd_log for the time being. See
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/commit/?h=v4.20-armsoc/dts64-fixes&id=13682e524167cbd7e2a26c5e91bec765f0f96273

> +	sdio_pwrseq: sdio-pwrseq {

> +		compatible = "mmc-pwrseq-simple";

> +		clocks = <&rk808 1>;

> +		clock-names = "ext_clock";

> +		pinctrl-names = "default";

> +		pinctrl-0 = <&wifi_enable_h>;

> +

> +		/*

> +		 * On the module itself this is one of these (depending

> +		 * on the actual card populated):

> +		 * - SDIO_RESET_L_WL_REG_ON

> +		 * - PDN (power down when low)

> +		 */

> +		reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */


general for all gpios: <&gpio RK_PB2 ...> for new boards please


> +	};

> +};


[...]

> +&rga {

> +	status = "disabled";


Why disabled? It shouldn't hurt.

> +};

> +

> +&cdn_dp {

> +// TODO: typec/fusb302 doesn't have extcon support yet

> +//	status = "enabled";

> +	extcon = <&fusb0>;


extcon is not specified and as we talked about yesterday, the
whole thing doesn't work with the type-c framework yet,
so ideally just remove the whole &cdn_dp node here.

> +	phys = <&tcphy0_dp>;

> +};

> +

> +&hdmi {


general for node-phandles: alphabetical please

> +	ddc-i2c-bus = <&i2c7>;

> +	pinctrl-names = "default";

> +	pinctrl-0 = <&hdmi_cec>;

> +	status = "okay";

> +};

> +

> +&i2c0 {

> +	status = "okay";

> +	i2c-scl-rising-time-ns = <160>;

> +	i2c-scl-falling-time-ns = <30>;

> +	clock-frequency = <400000>;

> +

> +	vdd_cpu_b: syr827@40 {

> +		compatible = "silergy,syr827";

> +		reg = <0x40>;

> +		vin-supply = <&vcc3v3_sys>;

> +		regulator-compatible = "fan53555-reg";


deprecated (and unusued) property

> +		pinctrl-names = "default";

> +		pinctrl-0 = <&vsel1_gpio>;

> +		vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;


not specified in mainline, ideally look at rock960 and friends
for reference

> +		regulator-name = "vdd_cpu_b";

> +		regulator-min-microvolt = <712500>;

> +		regulator-max-microvolt = <1500000>;

> +		regulator-ramp-delay = <1000>;

> +		fcs,suspend-voltage-selector = <1>;

> +		regulator-always-on;

> +		regulator-boot-on;

> +		regulator-initial-state = <3>;

> +			regulator-state-mem {

> +			regulator-off-in-suspend;

> +		};

> +	};

> +

> +	vdd_gpu: syr828@41 {

> +		compatible = "silergy,syr828";

> +		reg = <0x41>;

> +		vin-supply = <&vcc3v3_sys>;

> +		regulator-compatible = "fan53555-reg";

> +		pinctrl-names = "default";

> +		pinctrl-0 = <&vsel2_gpio>;

> +		vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;


same here

> +		regulator-name = "vdd_gpu";

> +		regulator-min-microvolt = <712500>;

> +		regulator-max-microvolt = <1500000>;

> +		regulator-ramp-delay = <1000>;

> +		fcs,suspend-voltage-selector = <1>;

> +		regulator-always-on;

> +		regulator-boot-on;

> +		regulator-initial-state = <3>;

> +			regulator-state-mem {

> +			regulator-off-in-suspend;

> +		};

> +	};

> +


[...]

> +&i2c4 {

> +	status = "okay";

> +	i2c-scl-rising-time-ns = <160>;

> +	i2c-scl-falling-time-ns = <30>;

> +	clock-frequency = <400000>;

> +

> +	fusb0: typec-portc@22 {

> +		compatible = "fcs,fusb302";

> +		reg = <0x22>;

> +		interrupt-parent = <&gpio1>;

> +		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;

> +		pinctrl-names = "default";

> +		pinctrl-0 = <&fusb0_int>;

> +		vbus-supply = <&vcc5v0_typec>;

> +		status = "okay";

> +	};

> +};

> +

> +&i2c7 {

> +	status = "okay";

> +};

> +

> +


double empty line

> +&io_domains {

> +	status = "okay";

> +

> +	bt656-supply = <&vcc1v8_dvp>;		/* bt656_gpio2ab_ms */

> +	audio-supply = <&vcca1v8_codec>;

> +	sdmmc-supply = <&vccio_sd>;		/* sdmmc_gpio4b_ms */

> +	gpio1830-supply = <&vcc_3v0>;		/* gpio1833_gpio4cd_ms */


I think we can do without the comments.

> +};

> +

> +&pmu_io_domains {

> +	status = "okay";

> +	pmu1830-supply = <&vcc_3v0>;

> +};

> +

> +&pcie_phy {

> +	status = "okay";

> +	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;

> +	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;

> +	assigned-clock-rates = <100000000>;

> +};

> +

> +&pcie0 {

> +	status = "okay";

> +	ep-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;

> +	num-lanes = <4>;

> +	max-link-speed = <2>;

> +};

> +

> +&pwm0 {

> +	status = "okay";

> +};

> +

> +&pwm1 {

> +	status = "okay";

> +};

> +

> +&pwm2 {

> +	status = "okay";

> +	pinctrl-names = "active";

> +	pinctrl-0 = <&pwm2_pin_pull_down>;

> +};

> +

> +&saradc {

> +	status = "okay";

> +	vref-supply = <&vccadc_ref>; /* TBD */

> +};

> +

> +&sdhci {

> +	bus-width = <8>;

> +	mmc-hs400-1_8v;

> +	supports-emmc;

> +	non-removable;

> +	keep-power-in-suspend;

> +	mmc-hs400-enhanced-strobe;

> +	status = "okay";

> +};

> +

> +&emmc_phy {

> +	status = "okay";

> +};

> +

> +&sdio0 {

> +	clock-frequency = <50000000>;


We have a ciu clock, so there should be no need for "clock-frquency"

> +	clock-freq-min-max = <200000 50000000>;


Not part of a binding and the mmc code also seems to ignore it

> +	supports-sdio;


unused and undocumented

> +	bus-width = <4>;

> +	disable-wp;

> +	cap-sd-highspeed;

> +	cap-sdio-irq;

> +	keep-power-in-suspend;

> +	mmc-pwrseq = <&sdio_pwrseq>;

> +	non-removable;

> +	num-slots = <1>;


outdated and unused property

> +	pinctrl-names = "default";

> +	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;

> +	sd-uhs-sdr104;

> +	status = "okay";

> +};

> +

> +&sdmmc {

> +	clock-frequency = <150000000>;

> +	clock-freq-min-max = <100000 150000000>;


same as sdio

> +	supports-sd;


unused and undocumented

> +	bus-width = <4>;

> +	cap-mmc-highspeed;

> +	cap-sd-highspeed;

> +	disable-wp;

> +	num-slots = <1>;


outdated and unused property

> +	sd-uhs-sdr104;

> +	vmmc-supply = <&vcc_sd>;

> +	vqmmc-supply = <&vccio_sd>;

> +	pinctrl-names = "default";

> +	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;

> +	status = "okay";

> +};

> +

> +&tsadc {

> +	/* tshut mode 0:CRU 1:GPIO */

> +	rockchip,hw-tshut-mode = <1>;

> +	/* tshut polarity 0:LOW 1:HIGH */

> +	rockchip,hw-tshut-polarity = <1>;

> +	status = "okay";

> +};

> +

> +&tcphy0 {

> +	extcon = <&fusb0>;


right now the fusb302 does not provide this extcon and should also
never do so. When omitting it, the tcphy will at least work in usb3
host mode.

> +	status = "okay";

> +};

> +

> +&tcphy1 {

> +	status = "okay";

> +};

> +

> +&u2phy0 {

> +	status = "okay";

> +	extcon = <&fusb0>;


same with the extcon

> +

> +	u2phy0_otg: otg-port {

> +		status = "okay";

> +	};

> +

> +	u2phy0_host: host-port {

> +		phy-supply = <&vcc5v0_host>;

> +		status = "okay";

> +	};

> +};

> +

> +&u2phy1 {

> +	status = "okay";

> +

> +	u2phy1_otg: otg-port {

> +		status = "okay";

> +	};

> +

> +	u2phy1_host: host-port {

> +		phy-supply = <&vcc5v0_host>;

> +		status = "okay";

> +	};

> +};

> +

> +&usbdrd3_0 {

> +	status = "okay";

> +	extcon = <&fusb0>;


not part of any binding I think?

> +&pinctrl {

> +

> +	hdmi {

> +		/delete-node/ hdmi-i2c-xfer;

> +	};


No need to delete the node, the hdmi-pinctrl above does not use the
internal i2c.


Heiko
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 0cc71236d639..e907d309486e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -71,6 +71,10 @@  Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
 
+- FriendlyElec NanoPC-T4 board:
+    Required root node properties:
+      - compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 49042c477870..ed90cd1e5a8b 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -20,3 +20,4 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
new file mode 100644
index 000000000000..0965712b4464
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -0,0 +1,18 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPC-T4";
+	compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+};
+
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
new file mode 100644
index 000000000000..148f85b4bd49
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -0,0 +1,770 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vccadc_ref: vccadc-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_sd: vcc-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_sd_h>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_lcd: vcc-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lcd";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		/* for rockchip boot on */
+		rockchip,pwm_id = <2>;
+		rockchip,pwm_voltage = <900000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key>;
+
+		button@0 {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 =<&leds_gpio>;
+
+		led@1 {
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+			label = "status_led";
+			linux,default-trigger = "heartbeat";
+			linux,default-trigger-delay-ms = <0>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&vdd_gpu>;
+};
+
+&gmac {
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&rga {
+	status = "disabled";
+};
+
+&cdn_dp {
+// TODO: typec/fusb302 doesn't have extcon support yet
+//	status = "enabled";
+	extcon = <&fusb0>;
+	phys = <&tcphy0_dp>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	clock-frequency = <400000>;
+
+	vdd_cpu_b: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		vin-supply = <&vcc3v3_sys>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-initial-state = <3>;
+			regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		vin-supply = <&vcc3v3_sys>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-initial-state = <3>;
+			regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-name = "vdd_center";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-name = "vdd_cpu_l";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc3v0_tp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-init-microvolt = <3000000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcca3v0_codec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vcc_1v5";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_codec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc_3v0";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_s3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <150>;
+	i2c-scl-falling-time-ns = <30>;
+	clock-frequency = <200000>;
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	clock-frequency = <400000>;
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;		/* bt656_gpio2ab_ms */
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vccio_sd>;		/* sdmmc_gpio4b_ms */
+	gpio1830-supply = <&vcc_3v0>;		/* gpio1833_gpio4cd_ms */
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pcie_phy {
+	status = "okay";
+	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
+	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
+	assigned-clock-rates = <100000000>;
+};
+
+&pcie0 {
+	status = "okay";
+	ep-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	max-link-speed = <2>;
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm2_pin_pull_down>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vccadc_ref>; /* TBD */
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	supports-emmc;
+	non-removable;
+	keep-power-in-suspend;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&sdio0 {
+	clock-frequency = <50000000>;
+	clock-freq-min-max = <200000 50000000>;
+	supports-sdio;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	clock-frequency = <150000000>;
+	clock-freq-min-max = <100000 150000000>;
+	supports-sd;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	num-slots = <1>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&tcphy0 {
+	extcon = <&fusb0>;
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+	extcon = <&fusb0>;
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&usbdrd3_0 {
+	status = "okay";
+	extcon = <&fusb0>;
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&pinctrl {
+
+	hdmi {
+		/delete-node/ hdmi-i2c-xfer;
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	vcc_sd {
+		vcc_sd_h: vcc-sd-h {
+			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rockchip-key {
+		power_key: power-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		leds_gpio: leds-gpio {
+			rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};