diff mbox series

[3/8,v6] regulator: max77686: Pass descriptor instead of GPIO number

Message ID 20181115080124.7789-4-linus.walleij@linaro.org
State Accepted
Commit 96392c3d8ca47f6654dfa40680c926b1a3419754
Headers show
Series Finalize regulator descriptor work | expand

Commit Message

Linus Walleij Nov. 15, 2018, 8:01 a.m. UTC 
Instead of passing a global GPIO number, pass a descriptor looked
up from the device tree configuration node.

Tested on Odroid U3 (with max77686 although not using any GPIOs
for regulators, so at least default paths are not broken).

Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Tested-by: Krzysztof Kozlowski <krzk@kernel.org>

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v4->v6:
- Request regulator nonexclusive as expected by the regulator
  core.
- Adjust numbering to fit the rest of the series.
ChangeLog v3->v4:
- Collected Krzysztof's test tags.
ChangeLog v2->v3:
- Name the regulator "max77686-regulator"
- Set the regulator to NULL on erroneous lookup, restoring the
  old init data lookup behaviour.
ChangeLog v1->v2:
- Rebase the patch on the other changes.
---
 drivers/regulator/max77686-regulator.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

-- 
2.17.2
diff mbox series

Patch

diff --git a/drivers/regulator/max77686-regulator.c b/drivers/regulator/max77686-regulator.c
index bee060937f56..f5cee1775905 100644
--- a/drivers/regulator/max77686-regulator.c
+++ b/drivers/regulator/max77686-regulator.c
@@ -11,8 +11,7 @@ 
 #include <linux/kernel.h>
 #include <linux/bug.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
@@ -76,6 +75,7 @@  enum max77686_ramp_rate {
 };
 
 struct max77686_data {
+	struct device *dev;
 	DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS);
 
 	/* Array indexed by regulator id */
@@ -255,16 +255,20 @@  static int max77686_of_parse_cb(struct device_node *np,
 	case MAX77686_BUCK8:
 	case MAX77686_BUCK9:
 	case MAX77686_LDO20 ... MAX77686_LDO22:
-		config->ena_gpio = of_get_named_gpio(np,
-					"maxim,ena-gpios", 0);
-		config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
-		config->ena_gpio_initialized = true;
+		config->ena_gpiod = devm_gpiod_get_from_of_node(max77686->dev,
+				np,
+				"maxim,ena",
+				0,
+				GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+				"max77686-regulator");
+		if (IS_ERR(config->ena_gpiod))
+			config->ena_gpiod = NULL;
 		break;
 	default:
 		return 0;
 	}
 
-	if (gpio_is_valid(config->ena_gpio)) {
+	if (config->ena_gpiod) {
 		set_bit(desc->id, max77686->gpio_enabled);
 
 		return regmap_update_bits(config->regmap, desc->enable_reg,
@@ -507,6 +511,7 @@  static int max77686_pmic_probe(struct platform_device *pdev)
 	if (!max77686)
 		return -ENOMEM;
 
+	max77686->dev = &pdev->dev;
 	config.dev = iodev->dev;
 	config.regmap = iodev->regmap;
 	config.driver_data = max77686;