@@ -39,15 +39,7 @@ This is example of
Playback: [MEM] -> [SRC2] -> [DVC0] -> [SSIU0/SSI0] -> [codec]
Capture: [MEM] <- [DVC1] <- [SRC3] <- [SSIU1/SSI1] <- [codec]
- &rcar_sound {
- ...
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src2 &dvc0>;
- capture = <&ssi1 &src3 &dvc1>;
- };
- };
- };
+see "Example: simple sound card"
You can use below.
${LINUX}/arch/arm/boot/dts/r8a7790.dts can be good example.
@@ -83,29 +75,8 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
** Asynchronous mode
------------------
-You need to use "simple-scu-audio-card" sound card for it.
-example)
-
- sound {
- compatible = "simple-scu-audio-card";
- ...
- /*
- * SRC Asynchronous mode setting
- * Playback:
- * All input data will be converted to 48kHz
- * Capture:
- * Inputed 48kHz data will be converted to
- * system specified Hz
- */
- simple-audio-card,convert-rate = <48000>;
- ...
- simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
- simple-audio-card,codec {
- ...
- };
- };
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
+see "Example: simple sound card for Asynchronous mode"
------------------
** Synchronous mode
@@ -141,26 +112,8 @@ For more detail information, see below
${LINUX}/sound/soc/sh/rcar/ctu.c
- comment of header
-You need to use "simple-scu-audio-card" sound card for it.
-example)
-
- sound {
- compatible = "simple-scu-audio-card";
- ...
- /*
- * CTU setting
- * All input data will be converted to 2ch
- * as output data
- */
- simple-audio-card,convert-channels = <2>;
- ...
- simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
- simple-audio-card,codec {
- ...
- };
- };
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
+see "Example: simple sound card for channel convert"
Ex) Exchange output channel
Input -> Output
@@ -190,42 +143,13 @@ and these sounds will be merged by MIX.
aplay -D plughw:0,0 xxxx.wav &
aplay -D plughw:0,1 yyyy.wav
-You need to use "simple-scu-audio-card" sound card for it.
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
Ex)
[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
|
[MEM] -> [SRC2] -> [CTU03] -+
- sound {
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "simple-scu-audio-card";
- ...
- simple-audio-card,cpu@0 {
- reg = <0>;
- sound-dai = <&rcar_sound 0>;
- };
- simple-audio-card,cpu@1 {
- reg = <1>;
- sound-dai = <&rcar_sound 1>;
- };
- simple-audio-card,codec {
- ...
- };
- };
-
- &rcar_sound {
- ...
- rcar_sound,dai {
- dai0 {
- playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
- };
- dai1 {
- playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
- };
- };
- };
+see "Example: simple sound card for MIXer"
=============================================
* DVC (Digital Volume and Mute Function)
@@ -304,14 +228,7 @@ This is example if SSI1 want to share WS pin with SSI0
You can use Multi-SSI.
This is example of SSI0/SSI1/SSI2 (= for 6ch)
- &rcar_sound {
- ...
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
- };
- };
- };
+see "Example: simple sound card for Multi channel"
** TDM-SSI
@@ -319,19 +236,7 @@ You can use TDM with SSI.
This is example of TDM 6ch.
Driver can automatically switches TDM <-> stereo mode in this case.
- rsnd_tdm: sound {
- compatible = "simple-audio-card";
- ...
- simple-audio-card,cpu {
- /* system can use TDM 6ch */
- dai-tdm-slot-num = <6>;
- sound-dai = <&rcar_sound>;
- };
- simple-audio-card,codec {
- ...
- };
- };
-
+see "Example: simple sound card for TDM"
=============================================
Required properties:
@@ -647,25 +552,102 @@ Example: simple sound card
};
=============================================
-Example: simple sound card for TDM
+Example: simple sound card for Asynchronous mode
=============================================
- rsnd_tdm: sound {
- compatible = "simple-audio-card";
+sound {
+ compatible = "simple-scu-audio-card";
+ ...
+ /*
+ * SRC Asynchronous mode setting
+ * Playback:
+ * All input data will be converted to 48kHz
+ * Capture:
+ * Inputed 48kHz data will be converted to
+ * system specified Hz
+ */
+ simple-audio-card,convert-rate = <48000>;
+ ...
+ simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+ simple-audio-card,codec {
+ ...
+ };
+};
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
+=============================================
+Example: simple sound card for channel convert
+=============================================
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- dai-tdm-slot-num = <6>;
- };
+sound {
+ compatible = "simple-scu-audio-card";
+ ...
+ /*
+ * CTU setting
+ * All input data will be converted to 2ch
+ * as output data
+ */
+ simple-audio-card,convert-channels = <2>;
+ ...
+ simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+ simple-audio-card,codec {
+ ...
+ };
+};
- sndcodec: simple-audio-card,codec {
- sound-dai = <&xxx>;
+=============================================
+Example: simple sound card for MIXer
+=============================================
+
+sound {
+ compatible = "simple-scu-audio-card";
+ ...
+ simple-audio-card,cpu@0 {
+ sound-dai = <&rcar_sound 0>;
+ };
+ simple-audio-card,cpu@1 {
+ sound-dai = <&rcar_sound 1>;
+ };
+ simple-audio-card,codec {
+ ...
+ };
+};
+
+&rcar_sound {
+ ...
+ rcar_sound,dai {
+ dai0 {
+ playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+ };
+ dai1 {
+ playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
};
};
+};
+
+=============================================
+Example: simple sound card for TDM
+=============================================
+
+rsnd_tdm: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ dai-tdm-slot-num = <6>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&xxx>;
+ };
+};
=============================================
Example: simple sound card for Multi channel