diff mbox series

[v2,1/2] spi: uniphier: fix incorrect property items

Message ID 1540533525-1816-2-git-send-email-hayashibara.keiji@socionext.com
State Accepted
Commit 3511ba7d4ca6f39e2d060bb94e42a41ad1fee7bf
Headers show
Series [v2,1/2] spi: uniphier: fix incorrect property items | expand

Commit Message

Keiji Hayashibara Oct. 26, 2018, 5:58 a.m. UTC 
This commit fixes incorrect property because it was different
from the actual.
The parameters of '#address-cells' and '#size-cells' were removed,
and 'interrupts', 'pinctrl-names' and 'pinctrl-0' were added.

Fixes: 4dcd5c2781f3 ("spi: add DT bindings for UniPhier SPI controller")
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>

---
 Documentation/devicetree/bindings/spi/spi-uniphier.txt | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
index 504a4ec..b04e66a 100644
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -5,18 +5,20 @@  UniPhier SoCs have SCSSI which supports SPI single channel.
 Required properties:
  - compatible: should be "socionext,uniphier-scssi"
  - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - clocks: A phandle to the clock for the device.
- - resets: A phandle to the reset control for the device.
+ - interrupts: a single interrupt specifier
+ - pinctrl-names: should be "default"
+ - pinctrl-0: pin control state for the default mode
+ - clocks: a phandle to the clock for the device
+ - resets: a phandle to the reset control for the device
 
 Example:
 
 spi0: spi@54006000 {
 	compatible = "socionext,uniphier-scssi";
 	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
+	interrupts = <0 39 4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
 	clocks = <&peri_clk 11>;
 	resets = <&peri_rst 11>;
 };