diff mbox

[26/40] ab8500-charger: Add UsbLineCtrl2 reference

Message ID 1360932310-30065-27-git-send-email-lee.jones@linaro.org
State Accepted
Commit b3ea5f451e4e435b650e34142f8552002dc21297
Headers show

Commit Message

Lee Jones Feb. 15, 2013, 12:44 p.m. UTC
From: Marcus Cooper <marcus.xm.cooper@stericsson.com>

When the state of USB Charge detection is changed then the calls
use a define for another register in other bank. This change
creates a new define for the correct register and removes the
magic numbers that are present.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
---
 drivers/power/ab8500_charger.c       |   11 +++++++----
 include/linux/mfd/abx500/ab8500-bm.h |    1 +
 2 files changed, 8 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index bf8b479..64accb2 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -54,6 +54,7 @@ 
 #define VBUS_DET_DBNC1			0x01
 #define OTP_ENABLE_WD			0x01
 #define DROP_COUNT_RESET		0x01
+#define USB_CH_DET			0x01
 
 #define MAIN_CH_INPUT_CURR_SHIFT	4
 #define VBUS_IN_CURR_LIM_SHIFT		4
@@ -2348,8 +2349,9 @@  static void ab8500_charger_usb_link_status_work(struct work_struct *work)
 					AB8500_CHARGER, AB8500_USBCH_CTRL1_REG,
 					USB_CH_ENA, USB_CH_ENA);
 			/*Enable charger detection*/
-			abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
-					AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x01);
+			abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+					USB_CH_DET, USB_CH_DET);
 			di->invalid_charger_detect_state = 1;
 			/*exit and wait for new link status interrupt.*/
 			return;
@@ -2359,8 +2361,9 @@  static void ab8500_charger_usb_link_status_work(struct work_struct *work)
 			dev_dbg(di->dev,
 					"Invalid charger detected, state= 1\n");
 			/*Stop charger detection*/
-			abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
-					AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x00);
+			abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+					USB_CH_DET, 0x00);
 			/*Check link status*/
 			if (is_ab8500(di->parent))
 				ret = abx500_get_register_interruptible(di->dev,
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
index faccdbd..829c352 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -23,6 +23,7 @@ 
  * Bank : 0x5
  */
 #define AB8500_USB_LINE_STAT_REG	0x80
+#define AB8500_USB_LINE_CTRL2_REG	0x82
 #define AB8500_USB_LINK1_STAT_REG	0x94
 
 /*