diff mbox

[2/6,V4] Sound: MAX98095: Add the driver for codec

Message ID 1360907176-18802-3-git-send-email-rajeshwari.s@samsung.com
State Accepted
Commit 5febe8db91a9feca467ce8e0189a69b49cba02e7
Headers show

Commit Message

Rajeshwari Shinde Feb. 15, 2013, 5:46 a.m. UTC
This patch adds the driver for codec MAX98095 required by Snow
Board

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Chnages in V2:
        - None
Changes in V3:
        - None
Changes in V4:
        - None
 drivers/sound/Makefile   |    1 +
 drivers/sound/max98095.c |  550 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/sound/max98095.h |  311 ++++++++++++++++++++++++++
 3 files changed, 862 insertions(+), 0 deletions(-)
 create mode 100644 drivers/sound/max98095.c
 create mode 100644 drivers/sound/max98095.h

Comments

Simon Glass Feb. 16, 2013, 4:21 a.m. UTC | #1
On Thu, Feb 14, 2013 at 9:46 PM, Rajeshwari Shinde
<rajeshwari.s@samsung.com> wrote:
> This patch adds the driver for codec MAX98095 required by Snow
> Board
>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>

Acked-by: Simon Glass <sjg@chromium.org>
prem s April 5, 2013, 11:11 a.m. UTC | #2
Hi all,

I am working on ODROID PC Exynos-4 Board (Cortex-A9). In that board i am
working MAX98089 Audio codec.

How to initialize this audio codec and how to test this one in UBOOT level.

Can you please help me on this.

Thanks

Prem V.

On Sat, Feb 16, 2013 at 9:51 AM, Simon Glass <sjg@chromium.org> wrote:

> On Thu, Feb 14, 2013 at 9:46 PM, Rajeshwari Shinde
> <rajeshwari.s@samsung.com> wrote:
> > This patch adds the driver for codec MAX98095 required by Snow
> > Board
> >
> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>
> Acked-by: Simon Glass <sjg@chromium.org>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
Rajeshwari Birje April 5, 2013, 1:30 p.m. UTC | #3
Hi Prem S,

We initialise MAX98095 using device tree, if you don't have a device
tree support u need to have a  asm/arch/sound.h
which will initialise all values like sample rate, codec type, etc..
Actually in u-boot we have added audio support to play a beep sound.
You can have look at drivers/sound/sound.c
To test the same you can have look at common/cmd_sound.c, where we
have 2 commands
sound init and sound play.

Hope this information will help you.
diff mbox

Patch

diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 8fdffb1..1987ca1 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -28,6 +28,7 @@  LIB	:= $(obj)libsound.o
 COBJS-$(CONFIG_SOUND)	+= sound.o
 COBJS-$(CONFIG_I2S)	+= samsung-i2s.o
 COBJS-$(CONFIG_SOUND_WM8994)	+= wm8994.o
+COBJS-$(CONFIG_SOUND_MAX98095)	+= max98095.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c
new file mode 100644
index 0000000..d69db58
--- /dev/null
+++ b/drivers/sound/max98095.c
@@ -0,0 +1,550 @@ 
+/*
+ * max98095.c -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * Modified for uboot by R. Chandrasekar (rcsekar@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <sound.h>
+#include "i2s.h"
+#include "max98095.h"
+
+enum max98095_type {
+	MAX98095,
+};
+
+struct max98095_priv {
+	enum max98095_type devtype;
+	unsigned int sysclk;
+	unsigned int rate;
+	unsigned int fmt;
+};
+
+static struct sound_codec_info g_codec_info;
+struct max98095_priv g_max98095_info;
+unsigned int g_max98095_i2c_dev_addr;
+
+/* Index 0 is reserved. */
+int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
+		88200, 96000};
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param reg	reg number to be write
+ * @param data	data to be writen to the above registor
+ *
+ * @return	int value 1 for change, 0 for no change or negative error code.
+ */
+static int max98095_i2c_write(unsigned int reg, unsigned char data)
+{
+	debug("%s: Write Addr : 0x%02X, Data :  0x%02X\n",
+		__func__, reg, data);
+	return i2c_write(g_max98095_i2c_dev_addr, reg, 1, &data, 1);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param reg	reg number to be read
+ * @param data	address of read data to be stored
+ *
+ * @return	int value 0 for success, -1 in case of error.
+ */
+static unsigned int max98095_i2c_read(unsigned int reg, unsigned char *data)
+{
+	int ret;
+
+	ret = i2c_read(g_max98095_i2c_dev_addr, reg, 1, data, 1);
+	if (ret != 0) {
+		debug("%s: Error while reading register %#04x\n",
+			__func__, reg);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param reg	codec register
+ * @param mask	register mask
+ * @param value	new value
+ *
+ * @return int value 0 for success, non-zero error code.
+ */
+static int max98095_update_bits(unsigned int reg, unsigned char mask,
+				unsigned char value)
+{
+	int change, ret = 0;
+	unsigned char old, new;
+
+	if (max98095_i2c_read(reg, &old) != 0)
+		return -1;
+	new = (old & ~mask) | (value & mask);
+	change  = (old != new) ? 1 : 0;
+	if (change)
+		ret = max98095_i2c_write(reg, new);
+	if (ret < 0)
+		return ret;
+
+	return change;
+}
+
+/*
+ * codec mclk clock divider coefficients based on sampling rate
+ *
+ * @param rate sampling rate
+ * @param value address of indexvalue to be stored
+ *
+ * @return	0 for success or negative error code.
+ */
+static int rate_value(int rate, u8 *value)
+{
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
+		if (rate_table[i] >= rate) {
+			*value = i;
+			return 0;
+		}
+	}
+	*value = 1;
+
+	return -1;
+}
+
+/*
+ * Sets hw params for max98095
+ *
+ * @param max98095	max98095 information pointer
+ * @param rate		Sampling rate
+ * @param bits_per_sample	Bits per sample
+ *
+ * @return -1 for error  and 0  Success.
+ */
+static int max98095_hw_params(struct max98095_priv *max98095,
+		unsigned int rate, unsigned int bits_per_sample)
+{
+	u8 regval;
+	int error;
+
+	switch (bits_per_sample) {
+	case 16:
+		error = max98095_update_bits(M98095_034_DAI2_FORMAT,
+			M98095_DAI_WS, 0);
+		break;
+	case 24:
+		error = max98095_update_bits(M98095_034_DAI2_FORMAT,
+			M98095_DAI_WS, M98095_DAI_WS);
+		break;
+	default:
+		debug("%s: Illegal bits per sample %d.\n",
+			__func__, bits_per_sample);
+		return -1;
+	}
+
+	if (rate_value(rate, &regval)) {
+		debug("%s: Failed to set sample rate to %d.\n",
+			__func__, rate);
+		return -1;
+	}
+	max98095->rate = rate;
+
+	error |= max98095_update_bits(M98095_031_DAI2_CLKMODE,
+		M98095_CLKMODE_MASK, regval);
+
+	/* Update sample rate mode */
+	if (rate < 50000)
+		error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
+			M98095_DAI_DHF, 0);
+	else
+		error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
+			M98095_DAI_DHF, M98095_DAI_DHF);
+
+	if (error < 0) {
+		debug("%s: Error setting hardware params.\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Configures Audio interface system clock for the given frequency
+ *
+ * @param max98095	max98095 information
+ * @param freq		Sampling frequency in Hz
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_set_sysclk(struct max98095_priv *max98095,
+				unsigned int freq)
+{
+	int error = 0;
+
+	/* Requested clock frequency is already setup */
+	if (freq == max98095->sysclk)
+		return 0;
+
+	/* Setup clocks for slave mode, and using the PLL
+	 * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
+	 *	0x02 (when master clk is 20MHz to 40MHz)..
+	 *	0x03 (when master clk is 40MHz to 60MHz)..
+	 */
+	if ((freq >= 10000000) && (freq < 20000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x10);
+	} else if ((freq >= 20000000) && (freq < 40000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x20);
+	} else if ((freq >= 40000000) && (freq < 60000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x30);
+	} else {
+		debug("%s: Invalid master clock frequency\n", __func__);
+		return -1;
+	}
+
+	debug("%s: Clock at %uHz\n", __func__, freq);
+
+	if (error < 0)
+		return -1;
+
+	max98095->sysclk = freq;
+	return 0;
+}
+
+/*
+ * Sets Max98095 I2S format
+ *
+ * @param max98095	max98095 information
+ * @param fmt		i2S format - supports a subset of the options defined
+ *			in i2s.h.
+ *
+ * @return -1 for error and 0  Success.
+ */
+static int max98095_set_fmt(struct max98095_priv *max98095, int fmt)
+{
+	u8 regval = 0;
+	int error = 0;
+
+	if (fmt == max98095->fmt)
+		return 0;
+
+	max98095->fmt = fmt;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Slave mode PLL */
+		error |= max98095_i2c_write(M98095_032_DAI2_CLKCFG_HI,
+					0x80);
+		error |= max98095_i2c_write(M98095_033_DAI2_CLKCFG_LO,
+					0x00);
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Set to master mode */
+		regval |= M98095_DAI_MAS;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+	case SND_SOC_DAIFMT_CBM_CFS:
+	default:
+		debug("%s: Clock mode unsupported\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		regval |= M98095_DAI_DLY;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		break;
+	default:
+		debug("%s: Unrecognized format.\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		regval |= M98095_DAI_WCI;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		regval |= M98095_DAI_BCI;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		regval |= M98095_DAI_BCI | M98095_DAI_WCI;
+		break;
+	default:
+		debug("%s: Unrecognized inversion settings.\n", __func__);
+		return -1;
+	}
+
+	error |= max98095_update_bits(M98095_034_DAI2_FORMAT,
+		M98095_DAI_MAS | M98095_DAI_DLY | M98095_DAI_BCI |
+		M98095_DAI_WCI, regval);
+
+	error |= max98095_i2c_write(M98095_035_DAI2_CLOCK,
+		M98095_DAI_BSEL64);
+
+	if (error < 0) {
+		debug("%s: Error setting i2s format.\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * resets the audio codec
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_reset(void)
+{
+	int i, ret;
+
+	/*
+	 * Gracefully reset the DSP core and the codec hardware in a proper
+	 * sequence.
+	 */
+	ret = max98095_i2c_write(M98095_00F_HOST_CFG, 0);
+	if (ret != 0) {
+		debug("%s: Failed to reset DSP: %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = max98095_i2c_write(M98095_097_PWR_SYS, 0);
+	if (ret != 0) {
+		debug("%s: Failed to reset codec: %d\n", __func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Reset to hardware default for registers, as there is not a soft
+	 * reset hardware control register.
+	 */
+	for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) {
+		ret = max98095_i2c_write(i, 0);
+		if (ret < 0) {
+			debug("%s: Failed to reset: %d\n", __func__, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Intialise max98095 codec device
+ *
+ * @param max98095	max98095 information
+ *
+ * @returns -1 for error  and 0 Success.
+ */
+static int max98095_device_init(struct max98095_priv *max98095)
+{
+	unsigned char id;
+	int error = 0;
+
+	/* reset the codec, the DSP core, and disable all interrupts */
+	error = max98095_reset();
+	if (error != 0) {
+		debug("Reset\n");
+		return error;
+	}
+
+	/* initialize private data */
+	max98095->sysclk = -1U;
+	max98095->rate = -1U;
+	max98095->fmt = -1U;
+
+	error = max98095_i2c_read(M98095_0FF_REV_ID, &id);
+	if (error < 0) {
+		debug("%s: Failure reading hardware revision: %d\n",
+			__func__, id);
+		goto err_access;
+	}
+	debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A');
+
+	error |= max98095_i2c_write(M98095_097_PWR_SYS, M98095_PWRSV);
+
+	/*
+	 * initialize registers to hardware default configuring audio
+	 * interface2 to DAC
+	 */
+	error |= max98095_i2c_write(M98095_048_MIX_DAC_LR,
+		M98095_DAI2M_TO_DACL|M98095_DAI2M_TO_DACR);
+
+	error |= max98095_i2c_write(M98095_092_PWR_EN_OUT,
+			M98095_SPK_SPREADSPECTRUM);
+	error |= max98095_i2c_write(M98095_045_CFG_DSP, M98095_DSPNORMAL);
+	error |= max98095_i2c_write(M98095_04E_CFG_HP, M98095_HPNORMAL);
+
+	error |= max98095_i2c_write(M98095_02C_DAI1_IOCFG,
+			M98095_S1NORMAL|M98095_SDATA);
+
+	error |= max98095_i2c_write(M98095_036_DAI2_IOCFG,
+			M98095_S2NORMAL|M98095_SDATA);
+
+	error |= max98095_i2c_write(M98095_040_DAI3_IOCFG,
+			M98095_S3NORMAL|M98095_SDATA);
+
+	/* take the codec out of the shut down */
+	error |= max98095_update_bits(M98095_097_PWR_SYS, M98095_SHDNRUN,
+			M98095_SHDNRUN);
+	/* route DACL and DACR output to HO and Spekers */
+	error |= max98095_i2c_write(M98095_050_MIX_SPK_LEFT, 0x01); /* DACL */
+	error |= max98095_i2c_write(M98095_051_MIX_SPK_RIGHT, 0x01);/* DACR */
+	error |= max98095_i2c_write(M98095_04C_MIX_HP_LEFT, 0x01);  /* DACL */
+	error |= max98095_i2c_write(M98095_04D_MIX_HP_RIGHT, 0x01); /* DACR */
+
+	/* power Enable */
+	error |= max98095_i2c_write(M98095_091_PWR_EN_OUT, 0xF3);
+
+	/* set Volume */
+	error |= max98095_i2c_write(M98095_064_LVL_HP_L, 15);
+	error |= max98095_i2c_write(M98095_065_LVL_HP_R, 15);
+	error |= max98095_i2c_write(M98095_067_LVL_SPK_L, 16);
+	error |= max98095_i2c_write(M98095_068_LVL_SPK_R, 16);
+
+	/* Enable DAIs */
+	error |= max98095_i2c_write(M98095_093_BIAS_CTRL, 0x30);
+	error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x07);
+
+err_access:
+	if (error < 0)
+		return -1;
+
+	return 0;
+}
+
+static int max98095_do_init(struct sound_codec_info *pcodec_info,
+			int sampling_rate, int mclk_freq,
+			int bits_per_sample)
+{
+	int ret = 0;
+
+	/* Enable codec clock */
+	set_xclkout();
+
+	/* shift the device address by 1 for 7 bit addressing */
+	g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1;
+
+	if (pcodec_info->codec_type == CODEC_MAX_98095)
+		g_max98095_info.devtype = MAX98095;
+	else {
+		debug("%s: Codec id [%d] not defined\n", __func__,
+				pcodec_info->codec_type);
+		return -1;
+	}
+
+	ret = max98095_device_init(&g_max98095_info);
+	if (ret < 0) {
+		debug("%s: max98095 codec chip init failed\n", __func__);
+		return ret;
+	}
+
+	ret = max98095_set_sysclk(&g_max98095_info, mclk_freq);
+	if (ret < 0) {
+		debug("%s: max98095 codec set sys clock failed\n", __func__);
+		return ret;
+	}
+
+	ret = max98095_hw_params(&g_max98095_info, sampling_rate,
+				bits_per_sample);
+
+	if (ret == 0) {
+		ret = max98095_set_fmt(&g_max98095_info,
+					SND_SOC_DAIFMT_I2S |
+					SND_SOC_DAIFMT_NB_NF |
+					SND_SOC_DAIFMT_CBS_CFS);
+	}
+
+	return ret;
+}
+
+static int get_max98095_codec_values(struct sound_codec_info *pcodec_info,
+				const void *blob)
+{
+	int error = 0;
+#ifdef CONFIG_OF_CONTROL
+	enum fdt_compat_id compat;
+	int node;
+	int parent;
+
+	/* Get the node from FDT for codec */
+	node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_98095_CODEC);
+	if (node <= 0) {
+		debug("EXYNOS_SOUND: No node for codec in device tree\n");
+		debug("node = %d\n", node);
+		return -1;
+	}
+
+	parent = fdt_parent_offset(blob, node);
+	if (parent < 0) {
+		debug("%s: Cannot find node parent\n", __func__);
+		return -1;
+	}
+
+	compat = fdtdec_lookup(blob, parent);
+	switch (compat) {
+	case COMPAT_SAMSUNG_S3C2440_I2C:
+		pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
+		error |= pcodec_info->i2c_bus;
+		debug("i2c bus = %d\n", pcodec_info->i2c_bus);
+		pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
+							"reg", 0);
+		error |= pcodec_info->i2c_dev_addr;
+		debug("i2c dev addr = %x\n", pcodec_info->i2c_dev_addr);
+		break;
+	default:
+		debug("%s: Unknown compat id %d\n", __func__, compat);
+		return -1;
+	}
+#else
+	pcodec_info->i2c_bus = AUDIO_I2C_BUS;
+	pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
+	debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+#endif
+	pcodec_info->codec_type = CODEC_MAX_98095;
+	if (error == -1) {
+		debug("fail to get max98095 codec node properties\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/* max98095 Device Initialisation */
+int max98095_init(const void *blob, int sampling_rate, int mclk_freq,
+			int bits_per_sample)
+{
+	int ret;
+	int old_bus = i2c_get_bus_num();
+	struct sound_codec_info *pcodec_info = &g_codec_info;
+
+	if (get_max98095_codec_values(pcodec_info, blob) < 0) {
+		debug("FDT Codec values failed\n");
+		 return -1;
+	}
+
+	i2c_set_bus_num(pcodec_info->i2c_bus);
+	ret = max98095_do_init(pcodec_info, sampling_rate, mclk_freq,
+				bits_per_sample);
+	i2c_set_bus_num(old_bus);
+
+	return ret;
+}
diff --git a/drivers/sound/max98095.h b/drivers/sound/max98095.h
new file mode 100644
index 0000000..ae5eb14
--- /dev/null
+++ b/drivers/sound/max98095.h
@@ -0,0 +1,311 @@ 
+/*
+ * max98095.h -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MAX98095_H
+#define _MAX98095_H
+
+/*
+ * MAX98095 Registers Definition
+ */
+
+#define M98095_000_HOST_DATA		0x00
+#define M98095_001_HOST_INT_STS		0x01
+#define M98095_002_HOST_RSP_STS		0x02
+#define M98095_003_HOST_CMD_STS		0x03
+#define M98095_004_CODEC_STS		0x04
+#define M98095_005_DAI1_ALC_STS		0x05
+#define M98095_006_DAI2_ALC_STS		0x06
+#define M98095_007_JACK_AUTO_STS	0x07
+#define M98095_008_JACK_MANUAL_STS	0x08
+#define M98095_009_JACK_VBAT_STS	0x09
+#define M98095_00A_ACC_ADC_STS		0x0A
+#define M98095_00B_MIC_NG_AGC_STS	0x0B
+#define M98095_00C_SPK_L_VOLT_STS	0x0C
+#define M98095_00D_SPK_R_VOLT_STS	0x0D
+#define M98095_00E_TEMP_SENSOR_STS	0x0E
+#define M98095_00F_HOST_CFG		0x0F
+#define M98095_010_HOST_INT_CFG		0x10
+#define M98095_011_HOST_INT_EN		0x11
+#define M98095_012_CODEC_INT_EN		0x12
+#define M98095_013_JACK_INT_EN		0x13
+#define M98095_014_JACK_INT_EN		0x14
+#define M98095_015_DEC			0x15
+#define M98095_016_RESERVED		0x16
+#define M98095_017_RESERVED		0x17
+#define M98095_018_KEYCODE3		0x18
+#define M98095_019_KEYCODE2		0x19
+#define M98095_01A_KEYCODE1		0x1A
+#define M98095_01B_KEYCODE0		0x1B
+#define M98095_01C_OEMCODE1		0x1C
+#define M98095_01D_OEMCODE0		0x1D
+#define M98095_01E_XCFG1		0x1E
+#define M98095_01F_XCFG2		0x1F
+#define M98095_020_XCFG3		0x20
+#define M98095_021_XCFG4		0x21
+#define M98095_022_XCFG5		0x22
+#define M98095_023_XCFG6		0x23
+#define M98095_024_XGPIO		0x24
+#define M98095_025_XCLKCFG		0x25
+#define M98095_026_SYS_CLK		0x26
+#define M98095_027_DAI1_CLKMODE		0x27
+#define M98095_028_DAI1_CLKCFG_HI	0x28
+#define M98095_029_DAI1_CLKCFG_LO	0x29
+#define M98095_02A_DAI1_FORMAT		0x2A
+#define M98095_02B_DAI1_CLOCK		0x2B
+#define M98095_02C_DAI1_IOCFG		0x2C
+#define M98095_02D_DAI1_TDM		0x2D
+#define M98095_02E_DAI1_FILTERS		0x2E
+#define M98095_02F_DAI1_LVL1		0x2F
+#define M98095_030_DAI1_LVL2		0x30
+#define M98095_031_DAI2_CLKMODE		0x31
+#define M98095_032_DAI2_CLKCFG_HI	0x32
+#define M98095_033_DAI2_CLKCFG_LO	0x33
+#define M98095_034_DAI2_FORMAT		0x34
+#define M98095_035_DAI2_CLOCK		0x35
+#define M98095_036_DAI2_IOCFG		0x36
+#define M98095_037_DAI2_TDM		0x37
+#define M98095_038_DAI2_FILTERS		0x38
+#define M98095_039_DAI2_LVL1		0x39
+#define M98095_03A_DAI2_LVL2		0x3A
+#define M98095_03B_DAI3_CLKMODE		0x3B
+#define M98095_03C_DAI3_CLKCFG_HI	0x3C
+#define M98095_03D_DAI3_CLKCFG_LO	0x3D
+#define M98095_03E_DAI3_FORMAT		0x3E
+#define M98095_03F_DAI3_CLOCK		0x3F
+#define M98095_040_DAI3_IOCFG		0x40
+#define M98095_041_DAI3_TDM		0x41
+#define M98095_042_DAI3_FILTERS		0x42
+#define M98095_043_DAI3_LVL1		0x43
+#define M98095_044_DAI3_LVL2		0x44
+#define M98095_045_CFG_DSP		0x45
+#define M98095_046_DAC_CTRL1		0x46
+#define M98095_047_DAC_CTRL2		0x47
+#define M98095_048_MIX_DAC_LR		0x48
+#define M98095_049_MIX_DAC_M		0x49
+#define M98095_04A_MIX_ADC_LEFT		0x4A
+#define M98095_04B_MIX_ADC_RIGHT	0x4B
+#define M98095_04C_MIX_HP_LEFT		0x4C
+#define M98095_04D_MIX_HP_RIGHT		0x4D
+#define M98095_04E_CFG_HP		0x4E
+#define M98095_04F_MIX_RCV		0x4F
+#define M98095_050_MIX_SPK_LEFT		0x50
+#define M98095_051_MIX_SPK_RIGHT	0x51
+#define M98095_052_MIX_SPK_CFG		0x52
+#define M98095_053_MIX_LINEOUT1		0x53
+#define M98095_054_MIX_LINEOUT2		0x54
+#define M98095_055_MIX_LINEOUT_CFG	0x55
+#define M98095_056_LVL_SIDETONE_DAI12	0x56
+#define M98095_057_LVL_SIDETONE_DAI3	0x57
+#define M98095_058_LVL_DAI1_PLAY	0x58
+#define M98095_059_LVL_DAI1_EQ		0x59
+#define M98095_05A_LVL_DAI2_PLAY	0x5A
+#define M98095_05B_LVL_DAI2_EQ		0x5B
+#define M98095_05C_LVL_DAI3_PLAY	0x5C
+#define M98095_05D_LVL_ADC_L		0x5D
+#define M98095_05E_LVL_ADC_R		0x5E
+#define M98095_05F_LVL_MIC1		0x5F
+#define M98095_060_LVL_MIC2		0x60
+#define M98095_061_LVL_LINEIN		0x61
+#define M98095_062_LVL_LINEOUT1		0x62
+#define M98095_063_LVL_LINEOUT2		0x63
+#define M98095_064_LVL_HP_L		0x64
+#define M98095_065_LVL_HP_R		0x65
+#define M98095_066_LVL_RCV		0x66
+#define M98095_067_LVL_SPK_L		0x67
+#define M98095_068_LVL_SPK_R		0x68
+#define M98095_069_MICAGC_CFG		0x69
+#define M98095_06A_MICAGC_THRESH	0x6A
+#define M98095_06B_SPK_NOISEGATE	0x6B
+#define M98095_06C_DAI1_ALC1_TIME	0x6C
+#define M98095_06D_DAI1_ALC1_COMP	0x6D
+#define M98095_06E_DAI1_ALC1_EXPN	0x6E
+#define M98095_06F_DAI1_ALC1_GAIN	0x6F
+#define M98095_070_DAI1_ALC2_TIME	0x70
+#define M98095_071_DAI1_ALC2_COMP	0x71
+#define M98095_072_DAI1_ALC2_EXPN	0x72
+#define M98095_073_DAI1_ALC2_GAIN	0x73
+#define M98095_074_DAI1_ALC3_TIME	0x74
+#define M98095_075_DAI1_ALC3_COMP	0x75
+#define M98095_076_DAI1_ALC3_EXPN	0x76
+#define M98095_077_DAI1_ALC3_GAIN	0x77
+#define M98095_078_DAI2_ALC1_TIME	0x78
+#define M98095_079_DAI2_ALC1_COMP	0x79
+#define M98095_07A_DAI2_ALC1_EXPN	0x7A
+#define M98095_07B_DAI2_ALC1_GAIN	0x7B
+#define M98095_07C_DAI2_ALC2_TIME	0x7C
+#define M98095_07D_DAI2_ALC2_COMP	0x7D
+#define M98095_07E_DAI2_ALC2_EXPN	0x7E
+#define M98095_07F_DAI2_ALC2_GAIN	0x7F
+#define M98095_080_DAI2_ALC3_TIME	0x80
+#define M98095_081_DAI2_ALC3_COMP	0x81
+#define M98095_082_DAI2_ALC3_EXPN	0x82
+#define M98095_083_DAI2_ALC3_GAIN	0x83
+#define M98095_084_HP_NOISE_GATE	0x84
+#define M98095_085_AUX_ADC		0x85
+#define M98095_086_CFG_LINE		0x86
+#define M98095_087_CFG_MIC		0x87
+#define M98095_088_CFG_LEVEL		0x88
+#define M98095_089_JACK_DET_AUTO	0x89
+#define M98095_08A_JACK_DET_MANUAL	0x8A
+#define M98095_08B_JACK_KEYSCAN_DBC	0x8B
+#define M98095_08C_JACK_KEYSCAN_DLY	0x8C
+#define M98095_08D_JACK_KEY_THRESH	0x8D
+#define M98095_08E_JACK_DC_SLEW		0x8E
+#define M98095_08F_JACK_TEST_CFG	0x8F
+#define M98095_090_PWR_EN_IN		0x90
+#define M98095_091_PWR_EN_OUT		0x91
+#define M98095_092_PWR_EN_OUT		0x92
+#define M98095_093_BIAS_CTRL		0x93
+#define M98095_094_PWR_DAC_21		0x94
+#define M98095_095_PWR_DAC_03		0x95
+#define M98095_096_PWR_DAC_CK		0x96
+#define M98095_097_PWR_SYS		0x97
+
+#define M98095_0FF_REV_ID		0xFF
+
+#define M98095_REG_CNT			(0xFF+1)
+#define M98095_REG_MAX_CACHED		0X97
+
+/* MAX98095 Registers Bit Fields */
+
+/* M98095_00F_HOST_CFG */
+#define M98095_SEG			(1<<0)
+#define M98095_XTEN			(1<<1)
+#define M98095_MDLLEN			(1<<2)
+
+/* M98095_027_DAI1_CLKMODE, M98095_031_DAI2_CLKMODE, M98095_03B_DAI3_CLKMODE */
+#define M98095_CLKMODE_MASK		0xFF
+
+/* M98095_02A_DAI1_FORMAT, M98095_034_DAI2_FORMAT, M98095_03E_DAI3_FORMAT */
+#define M98095_DAI_MAS			(1<<7)
+#define M98095_DAI_WCI			(1<<6)
+#define M98095_DAI_BCI			(1<<5)
+#define M98095_DAI_DLY			(1<<4)
+#define M98095_DAI_TDM			(1<<2)
+#define M98095_DAI_FSW			(1<<1)
+#define M98095_DAI_WS			(1<<0)
+
+/* M98095_02B_DAI1_CLOCK, M98095_035_DAI2_CLOCK, M98095_03F_DAI3_CLOCK */
+#define M98095_DAI_BSEL64		(1<<0)
+#define M98095_DAI_DOSR_DIV2		(0<<5)
+#define M98095_DAI_DOSR_DIV4		(1<<5)
+
+/* M98095_02C_DAI1_IOCFG, M98095_036_DAI2_IOCFG, M98095_040_DAI3_IOCFG */
+#define M98095_S1NORMAL			(1<<6)
+#define M98095_S2NORMAL			(2<<6)
+#define M98095_S3NORMAL			(3<<6)
+#define M98095_SDATA			(3<<0)
+
+/* M98095_02E_DAI1_FILTERS, M98095_038_DAI2_FILTERS, M98095_042_DAI3_FILTERS */
+#define M98095_DAI_DHF			(1<<3)
+
+/* M98095_045_DSP_CFG */
+#define M98095_DSPNORMAL		(5<<4)
+
+/* M98095_048_MIX_DAC_LR */
+#define M98095_DAI1L_TO_DACR		(1<<7)
+#define M98095_DAI1R_TO_DACR		(1<<6)
+#define M98095_DAI2M_TO_DACR		(1<<5)
+#define M98095_DAI1L_TO_DACL		(1<<3)
+#define M98095_DAI1R_TO_DACL		(1<<2)
+#define M98095_DAI2M_TO_DACL		(1<<1)
+#define M98095_DAI3M_TO_DACL		(1<<0)
+
+/* M98095_049_MIX_DAC_M */
+#define M98095_DAI1L_TO_DACM		(1<<3)
+#define M98095_DAI1R_TO_DACM		(1<<2)
+#define M98095_DAI2M_TO_DACM		(1<<1)
+#define M98095_DAI3M_TO_DACM		(1<<0)
+
+/* M98095_04E_MIX_HP_CFG */
+#define M98095_HPNORMAL			(3<<4)
+
+/* M98095_05F_LVL_MIC1, M98095_060_LVL_MIC2 */
+#define M98095_MICPRE_MASK		(3<<5)
+#define M98095_MICPRE_SHIFT		5
+
+/* M98095_064_LVL_HP_L, M98095_065_LVL_HP_R */
+#define M98095_HP_MUTE			(1<<7)
+
+/* M98095_066_LVL_RCV */
+#define M98095_REC_MUTE			(1<<7)
+
+/* M98095_067_LVL_SPK_L, M98095_068_LVL_SPK_R */
+#define M98095_SP_MUTE			(1<<7)
+
+/* M98095_087_CFG_MIC */
+#define M98095_MICSEL_MASK		(3<<0)
+#define M98095_DIGMIC_L			(1<<2)
+#define M98095_DIGMIC_R			(1<<3)
+#define M98095_DIGMIC2L			(1<<4)
+#define M98095_DIGMIC2R			(1<<5)
+
+/* M98095_088_CFG_LEVEL */
+#define M98095_VSEN			(1<<6)
+#define M98095_ZDEN			(1<<5)
+#define M98095_BQ2EN			(1<<3)
+#define M98095_BQ1EN			(1<<2)
+#define M98095_EQ2EN			(1<<1)
+#define M98095_EQ1EN			(1<<0)
+
+/* M98095_090_PWR_EN_IN */
+#define M98095_INEN			(1<<7)
+#define M98095_MB2EN			(1<<3)
+#define M98095_MB1EN			(1<<2)
+#define M98095_MBEN			(3<<2)
+#define M98095_ADREN			(1<<1)
+#define M98095_ADLEN			(1<<0)
+
+/* M98095_091_PWR_EN_OUT */
+#define M98095_HPLEN			(1<<7)
+#define M98095_HPREN			(1<<6)
+#define M98095_SPLEN			(1<<5)
+#define M98095_SPREN			(1<<4)
+#define M98095_RECEN			(1<<3)
+#define M98095_DALEN			(1<<1)
+#define M98095_DAREN			(1<<0)
+
+/* M98095_092_PWR_EN_OUT */
+#define M98095_SPK_FIXEDSPECTRUM	(0<<4)
+#define M98095_SPK_SPREADSPECTRUM	(1<<4)
+
+/* M98095_097_PWR_SYS */
+#define M98095_SHDNRUN			(1<<7)
+#define M98095_PERFMODE			(1<<3)
+#define M98095_HPPLYBACK		(1<<2)
+#define M98095_PWRSV8K			(1<<1)
+#define M98095_PWRSV			(1<<0)
+
+#define M98095_COEFS_PER_BAND		5
+
+/* Equalizer filter coefficients */
+#define M98095_110_DAI1_EQ_BASE		0x10
+#define M98095_142_DAI2_EQ_BASE		0x42
+
+/* Biquad filter coefficients */
+#define M98095_174_DAI1_BQ_BASE		0x74
+#define M98095_17E_DAI2_BQ_BASE		0x7E
+
+/* function prototype */
+
+/*
+ * intialise max98095 sound codec device for the given configuration
+ *
+ * @param blob			FDT node for codec values
+ * @param sampling_rate		Sampling rate (Hz)
+ * @param mclk_freq		MCLK Frequency (Hz)
+ * @param bits_per_sample	bits per Sample (must be 16 or 24)
+ *
+ * @returns -1 for error and 0 Success.
+ */
+int max98095_init(const void *blob, int sampling_rate, int mclk_freq,
+			int bits_per_sample);
+
+#endif