diff mbox series

spi: davinci: Remove chip select GPIO pdata

Message ID 20180904124128.14826-1-linus.walleij@linaro.org
State Accepted
Commit 56df612afb606dcefba8ab38ab32e052218b6050
Headers show
Series spi: davinci: Remove chip select GPIO pdata | expand

Commit Message

Linus Walleij Sept. 4, 2018, 12:41 p.m. UTC 
The DaVinci SPI can use either:
- Internal chip selects (inside the SPI host)
- External chip selects (using GPIO)
- External chip selects passed in pdata

The last way of passing external chip selects through
platform data is not used in the kernel. Delete it to make
the code simpler when refactoring GPIO.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Michele Dionisio <michele.dionisio@gmail.com>
Cc: Frode Isaksen <fisaksen@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 drivers/spi/spi-davinci.c                 | 7 -------
 include/linux/platform_data/spi-davinci.h | 4 ----
 2 files changed, 11 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index a02099c90c5c..76a87a674b87 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -434,13 +434,6 @@  static int davinci_spi_setup(struct spi_device *spi)
 			retval = gpio_direction_output(
 				      spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
 			internal_cs = false;
-		} else if (pdata->chip_sel &&
-			   spi->chip_select < pdata->num_chipselect &&
-			   pdata->chip_sel[spi->chip_select] != SPI_INTERN_CS) {
-			spi->cs_gpio = pdata->chip_sel[spi->chip_select];
-			retval = gpio_direction_output(
-				      spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
-			internal_cs = false;
 		}
 
 		if (retval) {
diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h
index f4edcb03c40c..0638fb6353bc 100644
--- a/include/linux/platform_data/spi-davinci.h
+++ b/include/linux/platform_data/spi-davinci.h
@@ -36,9 +36,6 @@  enum {
  * @num_chipselect: number of chipselects supported by this SPI master
  * @intr_line:	interrupt line used to connect the SPI IP to the ARM interrupt
  *		controller withn the SoC. Possible values are 0 and 1.
- * @chip_sel:	list of GPIOs which can act as chip-selects for the SPI.
- *		SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
- *		to populate if all chip-selects are internal.
  * @cshold_bug:	set this to true if the SPI controller on your chip requires
  *		a write to CSHOLD bit in between transfers (like in DM355).
  * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
@@ -48,7 +45,6 @@  struct davinci_spi_platform_data {
 	u8			version;
 	u8			num_chipselect;
 	u8			intr_line;
-	u8			*chip_sel;
 	u8			prescaler_limit;
 	bool			cshold_bug;
 	enum dma_event_q	dma_event_q;