Message ID | 20180823160743.45638-11-ming.huang@linaro.org |
---|---|
State | Superseded |
Headers | show |
Series | Upload for D06 platform | expand |
On 23 August 2018 at 17:07, Ming Huang <ming.huang@linaro.org> wrote: > > This patch is relative to D06 SasDxe driver. The SasDxe set a > variable to notice this libray. Here Wait for all disk ready > for 15S at most. > > D06: > For using straight-through hard disk backboard, some disk need > 15 seconds to ready. Actually, wait less 15 seconds here(minus > the time from end of SAS driver to here). > For using expander backboard, wait less 6 seconds here(minus > the time from end of SAS driver to here). > > D03/D05: > As Sas driver don't install PLATFORM_SAS_NOTIFY Protocol, D03/D05 > will skip waiting here. > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ming Huang <ming.huang@linaro.org> > --- > Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf | 4 +++ > Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c | 37 ++++++++++++++++++++ > 2 files changed, 41 insertions(+) > > diff --git a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf > index 7a53befc44..415f8ee36e 100644 > --- a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf > +++ b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf > @@ -36,6 +36,7 @@ > [Packages] > MdeModulePkg/MdeModulePkg.dec > MdePkg/MdePkg.dec > + Silicon/Hisilicon/HisiliconNonOsi.dec > Silicon/Hisilicon/HisiPkg.dec > > [LibraryClasses] > @@ -49,6 +50,7 @@ > MemoryAllocationLib > PcdLib > PrintLib > + TimerLib > UefiBootManagerLib > UefiBootServicesTableLib > UefiLib > @@ -67,8 +69,10 @@ > [Guids] > gEfiEndOfDxeEventGroupGuid > gEfiTtyTermGuid > + gOemConfigGuid This patch still adds a dependency on this guid, but it is not introduced until 14/31, so it breaks the build at 10,11,12,13/31. Also, it is not required for this patch. So introduce it only with the code that first uses it. / Leif > > [Protocols] > gEfiGenericMemTestProtocolGuid > gEfiLoadedImageProtocolGuid > gEsrtManagementProtocolGuid > + gPlatformSasNotifyProtocolGuid > diff --git a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c > index aa6db929ca..77295d0111 100644 > --- a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c > +++ b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c > @@ -20,6 +20,7 @@ > #include <Library/BmcConfigBootLib.h> > #include <Library/DevicePathLib.h> > #include <Library/PcdLib.h> > +#include <Library/TimerLib.h> > #include <Library/UefiBootManagerLib.h> > #include <Library/UefiLib.h> > #include <Protocol/DevicePath.h> > @@ -29,6 +30,7 @@ > #include <Protocol/LoadedImage.h> > #include <Protocol/PciIo.h> > #include <Protocol/PciRootBridgeIo.h> > +#include <Protocol/PlatformSasNotify.h> > #include <Guid/EventGroup.h> > #include <Guid/TtyTerm.h> > > @@ -554,6 +556,40 @@ PlatformBootManagerBeforeConsole ( > PlatformRegisterOptionsAndKeys (); > } > > +STATIC > +VOID > +WaitForDiskReady ( > + VOID > + ) > +{ > + EFI_STATUS Status; > + UINT32 Index; > + PLATFORM_SAS_NOTIFY *SasNotify; > + > + Status = gBS->LocateProtocol ( > + &gPlatformSasNotifyProtocolGuid, > + NULL, > + (VOID **)&SasNotify); > + if (EFI_ERROR (Status)) { > + DEBUG ((DEBUG_INFO, "Locate SasPlatformNotify:%r\n", Status)); > + return; > + } > + > + // Wait for 30 seconds at most. > + for (Index = 0; Index < 30; Index++) { > + Status = gBS->CheckEvent (SasNotify->WaitDiskEvent); > + if (!EFI_ERROR (Status)) { > + DEBUG ((DEBUG_INFO, "WaitDiskEvent is signaled.\n")); > + EfiBootManagerConnectAll (); > + break; > + } > + DEBUG ((DEBUG_ERROR, "%a", Index == 0 ? "Wait for disk." : ".")); > + MicroSecondDelay (1000 * 1000); > + } > + > + return; > +} > + > /** > Do the platform specific action after the console is ready > Possible things that can be done in PlatformBootManagerAfterConsole: > @@ -583,6 +619,7 @@ PlatformBootManagerAfterConsole ( > // Connect the rest of the devices. > // > EfiBootManagerConnectAll (); > + WaitForDiskReady (); > > // > // Enumerate all possible boot options. > -- > 2.18.0 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
diff --git a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf index 7a53befc44..415f8ee36e 100644 --- a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf +++ b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf @@ -36,6 +36,7 @@ [Packages] MdeModulePkg/MdeModulePkg.dec MdePkg/MdePkg.dec + Silicon/Hisilicon/HisiliconNonOsi.dec Silicon/Hisilicon/HisiPkg.dec [LibraryClasses] @@ -49,6 +50,7 @@ MemoryAllocationLib PcdLib PrintLib + TimerLib UefiBootManagerLib UefiBootServicesTableLib UefiLib @@ -67,8 +69,10 @@ [Guids] gEfiEndOfDxeEventGroupGuid gEfiTtyTermGuid + gOemConfigGuid [Protocols] gEfiGenericMemTestProtocolGuid gEfiLoadedImageProtocolGuid gEsrtManagementProtocolGuid + gPlatformSasNotifyProtocolGuid diff --git a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c index aa6db929ca..77295d0111 100644 --- a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c +++ b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c @@ -20,6 +20,7 @@ #include <Library/BmcConfigBootLib.h> #include <Library/DevicePathLib.h> #include <Library/PcdLib.h> +#include <Library/TimerLib.h> #include <Library/UefiBootManagerLib.h> #include <Library/UefiLib.h> #include <Protocol/DevicePath.h> @@ -29,6 +30,7 @@ #include <Protocol/LoadedImage.h> #include <Protocol/PciIo.h> #include <Protocol/PciRootBridgeIo.h> +#include <Protocol/PlatformSasNotify.h> #include <Guid/EventGroup.h> #include <Guid/TtyTerm.h> @@ -554,6 +556,40 @@ PlatformBootManagerBeforeConsole ( PlatformRegisterOptionsAndKeys (); } +STATIC +VOID +WaitForDiskReady ( + VOID + ) +{ + EFI_STATUS Status; + UINT32 Index; + PLATFORM_SAS_NOTIFY *SasNotify; + + Status = gBS->LocateProtocol ( + &gPlatformSasNotifyProtocolGuid, + NULL, + (VOID **)&SasNotify); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_INFO, "Locate SasPlatformNotify:%r\n", Status)); + return; + } + + // Wait for 30 seconds at most. + for (Index = 0; Index < 30; Index++) { + Status = gBS->CheckEvent (SasNotify->WaitDiskEvent); + if (!EFI_ERROR (Status)) { + DEBUG ((DEBUG_INFO, "WaitDiskEvent is signaled.\n")); + EfiBootManagerConnectAll (); + break; + } + DEBUG ((DEBUG_ERROR, "%a", Index == 0 ? "Wait for disk." : ".")); + MicroSecondDelay (1000 * 1000); + } + + return; +} + /** Do the platform specific action after the console is ready Possible things that can be done in PlatformBootManagerAfterConsole: @@ -583,6 +619,7 @@ PlatformBootManagerAfterConsole ( // Connect the rest of the devices. // EfiBootManagerConnectAll (); + WaitForDiskReady (); // // Enumerate all possible boot options.
This patch is relative to D06 SasDxe driver. The SasDxe set a variable to notice this libray. Here Wait for all disk ready for 15S at most. D06: For using straight-through hard disk backboard, some disk need 15 seconds to ready. Actually, wait less 15 seconds here(minus the time from end of SAS driver to here). For using expander backboard, wait less 6 seconds here(minus the time from end of SAS driver to here). D03/D05: As Sas driver don't install PLATFORM_SAS_NOTIFY Protocol, D03/D05 will skip waiting here. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ming Huang <ming.huang@linaro.org> --- Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf | 4 +++ Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c | 37 ++++++++++++++++++++ 2 files changed, 41 insertions(+) -- 2.18.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel