@@ -35,6 +35,9 @@
* -DPAA2
* -u-boot will allocate a range of stream IDs to be used by the Management
* Complex for containers and will set these values in the MC DPC image.
+ * -u-boot will fixup the iommu-map property in the fsl-mc node in the
+ * device tree (see Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+ * for more info on the msi-map definition)
* -the MC is responsible for allocating and setting up 'isolation context
* IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices.
*
@@ -575,6 +575,8 @@ int ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS);
+ fdt_fsl_mc_fixup_iommu_map_entry(blob);
+
fsl_fdt_fixup_flash(blob);
#ifdef CONFIG_FSL_MC_ENET
@@ -127,6 +127,8 @@ int ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_memory_banks(blob, base, size, 2);
+ fdt_fsl_mc_fixup_iommu_map_entry(blob);
+
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
fdt_fixup_board_enet(blob);
#endif
@@ -332,6 +332,8 @@ int ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_memory_banks(blob, base, size, 2);
+ fdt_fsl_mc_fixup_iommu_map_entry(blob);
+
fsl_fdt_fixup_dr_usb(blob, bd);
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
@@ -394,6 +394,8 @@ int ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_memory_banks(blob, base, size, 2);
+ fdt_fsl_mc_fixup_iommu_map_entry(blob);
+
fsl_fdt_fixup_dr_usb(blob, bd);
fsl_fdt_fixup_flash(blob);
@@ -278,6 +278,40 @@ static int mc_fixup_dpl_mac_addr(void *blob, int dpmac_id,
MC_FIXUP_DPL);
}
+void fdt_fsl_mc_fixup_iommu_map_entry(void *blob)
+{
+ u32 *prop;
+ u32 iommu_map[4];
+ int offset;
+ int lenp;
+
+ /* find fsl-mc node */
+ offset = fdt_path_offset(blob, "/soc/fsl-mc");
+ if (offset < 0)
+ offset = fdt_path_offset(blob, "/fsl-mc");
+ if (offset < 0) {
+ printf("%s: fsl-mc: ERR: fsl-mc node not found in DT, err %d\n",
+ __func__, offset);
+ return;
+ }
+
+ prop = fdt_getprop_w(blob, offset, "iommu-map", &lenp);
+ if (!prop) {
+ debug("%s: fsl-mc: ERR: missing iommu-map in fsl-mc bus node\n",
+ __func__);
+ return;
+ }
+
+ iommu_map[0] = cpu_to_fdt32(FSL_DPAA2_STREAM_ID_START);
+ iommu_map[1] = *++prop;
+ iommu_map[2] = cpu_to_fdt32(FSL_DPAA2_STREAM_ID_START);
+ iommu_map[3] = cpu_to_fdt32(FSL_DPAA2_STREAM_ID_END -
+ FSL_DPAA2_STREAM_ID_START + 1);
+
+ fdt_setprop_inplace(blob, offset, "iommu-map",
+ iommu_map, sizeof(iommu_map));
+}
+
static int mc_fixup_dpc_mac_addr(void *blob, int dpmac_id,
struct eth_device *eth_dev)
{
@@ -51,6 +51,7 @@ struct mc_ccsr_registers {
u32 reg_error[];
};
+void fdt_fsl_mc_fixup_iommu_map_entry(void *blob);
int get_mc_boot_status(void);
int get_dpl_apply_status(void);
#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
The iommu-map property in the fsl-mc node is updated by valid stream-ids by u-boot. This patch is to fixup this property for LS208x and LS1088. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> --- This patch fixes iommu-map property added for fsl-mc in kernel patch series: https://patchwork.codeaurora.org/patch/569431/ The kernel series adds iommu-map property for fsl-mc devices and this patch fixes that property. The patch only prints a debug log if the property is not found in the kernel. .../asm/arch-fsl-layerscape/stream_id_lsch3.h | 3 ++ board/freescale/ls1088a/ls1088a.c | 2 ++ board/freescale/ls2080a/ls2080a.c | 2 ++ board/freescale/ls2080aqds/ls2080aqds.c | 2 ++ board/freescale/ls2080ardb/ls2080ardb.c | 2 ++ drivers/net/fsl-mc/mc.c | 34 ++++++++++++++++++++++ include/fsl-mc/fsl_mc.h | 1 + 7 files changed, 46 insertions(+)