diff mbox

[10/13] i2c/i2c-nomadik: change the TX and RX threshold

Message ID BANLkTinxSR1uqMymwjMrH5L_TpvGK8aHiw@mail.gmail.com
State Accepted
Headers show

Commit Message

Linus Walleij May 10, 2011, 11:48 p.m. UTC 
---------- Forwarded message ----------
From: Linus Walleij <linus.walleij@linaro.org>
Date: 2011/5/9
Subject: [PATCH 10/13] i2c/i2c-nomadik: change the TX and RX threshold
To: Ben Dooks <ben-linux@fluff.org>, linux-i2c@vger.kernel.org
Kopia: Virupax Sadashivpetimath
<virupax.sadashivpetimath@stericsson.com>, Linus Walleij
<linus.walleij@linaro.org>


From: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>

1) Increase RX FIFO threshold so that there is a reduction in
the number of interrupts handled to complete a transaction.

2) Fill TX FIFO in the write function.

Signed-off-by: Virupax Sadashivpetimath
<virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/i2c/busses/i2c-nomadik.c |   39 +++++++++++++++++++++++++------------
 1 files changed, 26 insertions(+), 13 deletions(-)

--
1.7.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index bf061e1..916e4db 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -447,6 +447,24 @@  static int read_i2c(struct nmk_i2c_dev *dev)
       return status;
 }

+static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes)
+{
+       int count;
+
+       for (count = (no_bytes - 2);
+                       (count > 0) &&
+                       (dev->cli.count != 0);
+                       count--) {
+               /* write to the Tx FIFO */
+               writeb(*dev->cli.buffer,
+                       dev->virtbase + I2C_TFR);
+               dev->cli.buffer++;
+               dev->cli.count--;
+               dev->cli.xfer_bytes++;
+       }
+
+}
+
 /**
 * write_i2c() - Write data to I2C client.
 * @dev: private data of I2C Driver
@@ -474,8 +492,13 @@  static int write_i2c(struct nmk_i2c_dev *dev)
       init_completion(&dev->xfer_complete);

       /* enable interrupts by settings the masks */
-       irq_mask = (I2C_IT_TXFNE | I2C_IT_TXFOVR |
-                       I2C_IT_MAL | I2C_IT_BERR);
+       irq_mask = (I2C_IT_TXFOVR | I2C_IT_MAL | I2C_IT_BERR);
+
+       /* Fill the TX FIFO with transmit data */
+       fill_tx_fifo(dev, MAX_I2C_FIFO_THRESHOLD);
+
+       if (dev->cli.count != 0)
+               irq_mask |= I2C_IT_TXFNE;

       /*
        * check if we want to transfer a single or multiple bytes, if so
@@ -702,17 +725,7 @@  static irqreturn_t i2c_irq_handler(int irq, void *arg)
                        */
                       disable_interrupts(dev, I2C_IT_TXFNE);
               } else {
-                       for (count = (MAX_I2C_FIFO_THRESHOLD - tft - 2);
-                                       (count > 0) &&
-                                       (dev->cli.count != 0);
-                                       count--) {
-                               /* write to the Tx FIFO */
-                               writeb(*dev->cli.buffer,
-                                       dev->virtbase + I2C_TFR);
-                               dev->cli.buffer++;
-                               dev->cli.count--;
-                               dev->cli.xfer_bytes++;
-                       }
+                       fill_tx_fifo(dev, (MAX_I2C_FIFO_THRESHOLD - tft));
                       /*
                        * if done, close the transfer by disabling the
                        * corresponding TXFNE interrupt