diff mbox

[08/13] i2c/i2c-nomadik: use pm_runtime API

Message ID BANLkTinVnVgfpjJNRQAAjYkxbQdwohZJMg@mail.gmail.com
State Accepted
Headers show

Commit Message

Linus Walleij May 10, 2011, 11:46 p.m. UTC 
---------- Forwarded message ----------
From: Linus Walleij <linus.walleij@linaro.org>
Date: 2011/5/9
Subject: [PATCH 08/13] i2c/i2c-nomadik: use pm_runtime API
To: Ben Dooks <ben-linux@fluff.org>, linux-i2c@vger.kernel.org
Kopia: Rabin Vincent <rabin.vincent@stericsson.com>, Linus Walleij
<linus.walleij@linaro.org>


From: Rabin Vincent <rabin.vincent@stericsson.com>

Use the pm_runtime API for pins control.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/i2c/busses/i2c-nomadik.c |   51 +++++++++++++++++++++++++++++++++----
 1 files changed, 45 insertions(+), 6 deletions(-)

               dev_err(&pdev->dev, "could not get i2c clock\n");
@@ -958,6 +995,7 @@ static int __devinit nmk_i2c_probe(struct
platform_device *pdev)
 err_no_clk:
       if (dev->regulator)
               regulator_put(dev->regulator);
+       pm_runtime_disable(&pdev->dev);
       free_irq(dev->irq, dev);
 err_irq:
       iounmap(dev->virtbase);
@@ -990,6 +1028,7 @@ static int __devexit nmk_i2c_remove(struct
platform_device *pdev)
       clk_put(dev->clk);
       if (dev->regulator)
               regulator_put(dev->regulator);
+       pm_runtime_disable(&pdev->dev);
       platform_set_drvdata(pdev, NULL);
       kfree(dev);

@@ -1000,10 +1039,10 @@ static struct platform_driver nmk_i2c_driver = {
       .driver = {
               .owner = THIS_MODULE,
               .name = DRIVER_NAME,
+               .pm = &nmk_i2c_pm,
       },
       .probe = nmk_i2c_probe,
       .remove = __devexit_p(nmk_i2c_remove),
-       .suspend = nmk_i2c_suspend,
 };

 static int __init nmk_i2c_init(void)
--
1.7.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index c8bf81a..f3a0af0 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -23,6 +23,7 @@ 
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>

 #include <plat/i2c.h>

@@ -576,6 +577,7 @@  static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,

       if (dev->regulator)
               regulator_enable(dev->regulator);
+       pm_runtime_get_sync(&dev->pdev->dev);

       status = init_hw(dev);
       if (status)
@@ -634,6 +636,7 @@  static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 out:
       clk_disable(dev->clk);
 out2:
+       pm_runtime_put_sync(&dev->pdev->dev);
       if (dev->regulator)
               regulator_disable(dev->regulator);

@@ -839,19 +842,50 @@  static irqreturn_t i2c_irq_handler(int irq, void *arg)


 #ifdef CONFIG_PM
-static int nmk_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
+static int nmk_i2c_suspend(struct device *dev)
 {
-       struct nmk_i2c_dev *dev = platform_get_drvdata(pdev);
+       struct platform_device *pdev = to_platform_device(dev);
+       struct nmk_i2c_dev *nmk_i2c = platform_get_drvdata(pdev);

-       if (dev->busy)
+       if (nmk_i2c->busy)
               return -EBUSY;
-       else
-               return 0;
+
+       /*
+        * During system suspend, runtime suspend transitions are disabled.
+        * This check and direct call are here so that even if some driver
+        * performs i2c transactions in its suspend rountine, we would properly
+        * runtime suspend the i2c driver.
+        */
+       if (!pm_runtime_suspended(dev))
+               if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
+                       dev->bus->pm->runtime_suspend(dev);
+
+       return 0;
+}
+
+static int nmk_i2c_resume(struct device *dev)
+{
+       if (!pm_runtime_suspended(dev))
+               if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
+                       dev->bus->pm->runtime_resume(dev);
+
+       return 0;
 }
 #else
 #define nmk_i2c_suspend        NULL
+#define nmk_i2c_resume NULL
 #endif

+/*
+ * We use noirq so that we suspend late and resume before the wakeup interrupt
+ * to ensure that we do the !pm_runtime_suspended() check in resume before
+ * there has been a regular pm runtime resume (via pm_runtime_get_sync()).
+ */
+static const struct dev_pm_ops nmk_i2c_pm = {
+       .suspend_noirq  = nmk_i2c_suspend,
+       .resume_noirq   = nmk_i2c_resume,
+};
+
 static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
 {
       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -913,6 +947,9 @@  static int __devinit nmk_i2c_probe(struct
platform_device *pdev)
               dev->regulator = NULL;
       }

+       pm_suspend_ignore_children(&pdev->dev, true);
+       pm_runtime_enable(&pdev->dev);
+
       dev->clk = clk_get(&pdev->dev, NULL);
       if (IS_ERR(dev->clk)) {