diff mbox series

[v5,07/13] soundwire: Add stream configuration APIs

Message ID 1524649163-12088-8-git-send-email-vkoul@kernel.org
State New
Headers show
Series soundwire: Add stream support | expand

Commit Message

Vinod Koul April 25, 2018, 9:39 a.m. UTC 
From: Sanyog Kale <sanyog.r.kale@intel.com>


Add APIs for prepare, enable, disable and de-prepare stream.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>

Signed-off-by: Shreyas NC <shreyas.nc@intel.com>

Signed-off-by: Vinod Koul <vkoul@kernel.org>

---
 drivers/soundwire/bus.c       |   9 ++
 drivers/soundwire/stream.c    | 246 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/soundwire/sdw.h |   4 +
 3 files changed, 259 insertions(+)

-- 
2.7.4

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Comments

Sanyog Kale April 26, 2018, 4 a.m. UTC | #1 
On Wed, Apr 25, 2018 at 03:09:17PM +0530, Vinod Koul wrote:
> From: Sanyog Kale <sanyog.r.kale@intel.com>

> 

> Add APIs for prepare, enable, disable and de-prepare stream.

> 

> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>

> Signed-off-by: Shreyas NC <shreyas.nc@intel.com>

> Signed-off-by: Vinod Koul <vkoul@kernel.org>

> ---

>  drivers/soundwire/bus.c       |   9 ++

>  drivers/soundwire/stream.c    | 246 ++++++++++++++++++++++++++++++++++++++++++

>  include/linux/soundwire/sdw.h |   4 +

>  3 files changed, 259 insertions(+)

> 

> +

> +static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)

> +{

> +	struct sdw_master_runtime *m_rt = stream->m_rt;

> +	struct sdw_bus *bus = m_rt->bus;

> +	int ret = 0;

> +

> +	/* De-prepare port(s) */

> +	ret = sdw_prep_deprep_ports(m_rt, false);

> +	if (ret < 0) {

> +		dev_err(bus->dev, "De-prepare port(s) failed: %d", ret);

> +		return ret;

> +	}

> +

> +	/* TODO: Update this during Device-Device support */

> +	bus->params.bandwidth -= m_rt->stream->params.rate *

> +		m_rt->ch_count * m_rt->stream->params.bps;

> +


We should have kept zero bandwidth check here because there is no need
to perform sdw_program_params when no stream is running on bus.

> +	/* Program params */

> +	ret = sdw_program_params(bus);

> +	if (ret < 0) {

> +		dev_err(bus->dev, "Program params failed: %d", ret);

> +		return ret;

> +	}

> +

> +	return do_bank_switch(stream);


Change the state to DEPREPARE and then return.

> +

> +	stream->state = SDW_STREAM_DEPREPARED;

> +

> +	return ret;

> +}

> +

>  

> -- 

> 2.7.4

> 


-- 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Vinod Koul April 26, 2018, 4:28 a.m. UTC | #2 
On Thu, Apr 26, 2018 at 09:30:16AM +0530, Sanyog Kale wrote:
> On Wed, Apr 25, 2018 at 03:09:17PM +0530, Vinod Koul wrote:

> > From: Sanyog Kale <sanyog.r.kale@intel.com>

> > 

> > Add APIs for prepare, enable, disable and de-prepare stream.

> > 

> > Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>

> > Signed-off-by: Shreyas NC <shreyas.nc@intel.com>

> > Signed-off-by: Vinod Koul <vkoul@kernel.org>

> > ---

> >  drivers/soundwire/bus.c       |   9 ++

> >  drivers/soundwire/stream.c    | 246 ++++++++++++++++++++++++++++++++++++++++++

> >  include/linux/soundwire/sdw.h |   4 +

> >  3 files changed, 259 insertions(+)

> > 

> > +

> > +static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)

> > +{

> > +	struct sdw_master_runtime *m_rt = stream->m_rt;

> > +	struct sdw_bus *bus = m_rt->bus;

> > +	int ret = 0;

> > +

> > +	/* De-prepare port(s) */

> > +	ret = sdw_prep_deprep_ports(m_rt, false);

> > +	if (ret < 0) {

> > +		dev_err(bus->dev, "De-prepare port(s) failed: %d", ret);

> > +		return ret;

> > +	}

> > +

> > +	/* TODO: Update this during Device-Device support */

> > +	bus->params.bandwidth -= m_rt->stream->params.rate *

> > +		m_rt->ch_count * m_rt->stream->params.bps;

> > +

> 

> We should have kept zero bandwidth check here because there is no need

> to perform sdw_program_params when no stream is running on bus.


Looking at it I think it helps to program the calculated values, we may get
a new stream even before we get a chance to suspend. And frankly at bus, we
should not make any assumptions about suspend behaviour they may change with
platforms and archs :)

> 

> > +	/* Program params */

> > +	ret = sdw_program_params(bus);

> > +	if (ret < 0) {

> > +		dev_err(bus->dev, "Program params failed: %d", ret);

> > +		return ret;

> > +	}

> > +

> > +	return do_bank_switch(stream);

> 

> Change the state to DEPREPARE and then return.


good spot will fix

> 

> > +

> > +	stream->state = SDW_STREAM_DEPREPARED;

> > +

> > +	return ret;

-- 
~Vinod
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Sanyog Kale April 26, 2018, 4:38 a.m. UTC | #3 
On Thu, Apr 26, 2018 at 09:58:56AM +0530, Vinod Koul wrote:
> On Thu, Apr 26, 2018 at 09:30:16AM +0530, Sanyog Kale wrote:

> > On Wed, Apr 25, 2018 at 03:09:17PM +0530, Vinod Koul wrote:

> > > From: Sanyog Kale <sanyog.r.kale@intel.com>

> > > 

> > > Add APIs for prepare, enable, disable and de-prepare stream.

> > > 

> > > Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>

> > > Signed-off-by: Shreyas NC <shreyas.nc@intel.com>

> > > Signed-off-by: Vinod Koul <vkoul@kernel.org>

> > > ---

> > >  drivers/soundwire/bus.c       |   9 ++

> > >  drivers/soundwire/stream.c    | 246 ++++++++++++++++++++++++++++++++++++++++++

> > >  include/linux/soundwire/sdw.h |   4 +

> > >  3 files changed, 259 insertions(+)

> > > 

> > > +

> > > +static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)

> > > +{

> > > +	struct sdw_master_runtime *m_rt = stream->m_rt;

> > > +	struct sdw_bus *bus = m_rt->bus;

> > > +	int ret = 0;

> > > +

> > > +	/* De-prepare port(s) */

> > > +	ret = sdw_prep_deprep_ports(m_rt, false);

> > > +	if (ret < 0) {

> > > +		dev_err(bus->dev, "De-prepare port(s) failed: %d", ret);

> > > +		return ret;

> > > +	}

> > > +

> > > +	/* TODO: Update this during Device-Device support */

> > > +	bus->params.bandwidth -= m_rt->stream->params.rate *

> > > +		m_rt->ch_count * m_rt->stream->params.bps;

> > > +

> > 

> > We should have kept zero bandwidth check here because there is no need

> > to perform sdw_program_params when no stream is running on bus.

> 

> Looking at it I think it helps to program the calculated values, we may get

> a new stream even before we get a chance to suspend. And frankly at bus, we

> should not make any assumptions about suspend behaviour they may change with

> platforms and archs :)

>


Whats the use of computing & programming values when there is
no stream running? The computing and programming of values for new stream
will be done in new stream setup flow ie. in prepare, nothing needs to be
done here.

I agree we should not make any suspend behaviour assumption here. In
case of zero bandwidth, we should just change the stream state to
DEPREPARE and return.


> > 

> > > +	/* Program params */

> > > +	ret = sdw_program_params(bus);

> > > +	if (ret < 0) {

> > > +		dev_err(bus->dev, "Program params failed: %d", ret);

> > > +		return ret;

> > > +	}

> > > +

> > > +	return do_bank_switch(stream);

> > 

> > Change the state to DEPREPARE and then return.

> 

> good spot will fix

> 

> > 

> > > +

> > > +	stream->state = SDW_STREAM_DEPREPARED;

> > > +

> > > +	return ret;

> -- 

> ~Vinod


-- 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Vinod Koul April 26, 2018, 5:23 a.m. UTC | #4 
On Thu, Apr 26, 2018 at 10:08:13AM +0530, Sanyog Kale wrote:
> On Thu, Apr 26, 2018 at 09:58:56AM +0530, Vinod Koul wrote:


> > > We should have kept zero bandwidth check here because there is no need

> > > to perform sdw_program_params when no stream is running on bus.

> > 

> > Looking at it I think it helps to program the calculated values, we may get

> > a new stream even before we get a chance to suspend. And frankly at bus, we

> > should not make any assumptions about suspend behaviour they may change with

> > platforms and archs :)

> 

> Whats the use of computing & programming values when there is

> no stream running? The computing and programming of values for new stream

> will be done in new stream setup flow ie. in prepare, nothing needs to be

> done here.

> 

> I agree we should not make any suspend behaviour assumption here.


That is why programming this is required :)

> In case of zero bandwidth, we should just change the stream state to

> DEPREPARE and return.


Yes agreed and have fixed it, perhaps you missed below:
> > > 

> > > Change the state to DEPREPARE and then return.

> > 

> > good spot will fix


-- 
~Vinod
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
diff mbox series

Patch

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 084bf71b2b87..dcc0ff9f0c22 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -17,6 +17,7 @@ 
  */
 int sdw_add_bus_master(struct sdw_bus *bus)
 {
+	struct sdw_master_prop *prop = NULL;
 	int ret;
 
 	if (!bus->dev) {
@@ -79,9 +80,17 @@  int sdw_add_bus_master(struct sdw_bus *bus)
 	}
 
 	/*
+	 * Initialize clock values based on Master properties. The max
+	 * frequency is read from max_freq property. Current assumption
+	 * is that the bus will start at highest clock frequency when
+	 * powered on.
+	 *
 	 * Default active bank will be 0 as out of reset the Slaves have
 	 * to start with bank 0 (Table 40 of Spec)
 	 */
+	prop = &bus->prop;
+	bus->params.max_dr_freq = prop->max_freq * SDW_DOUBLE_RATE_FACTOR;
+	bus->params.curr_dr_freq = bus->params.max_dr_freq;
 	bus->params.curr_bank = SDW_BANK0;
 	bus->params.next_bank = SDW_BANK1;
 
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index 98348c38d0e0..68252f252841 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -1242,3 +1242,249 @@  struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
 
 	return NULL;
 }
+
+static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
+{
+	struct sdw_master_runtime *m_rt = stream->m_rt;
+	struct sdw_bus *bus = m_rt->bus;
+	struct sdw_master_prop *prop = NULL;
+	struct sdw_bus_params params;
+	int ret;
+
+	prop = &bus->prop;
+	memcpy(&params, &bus->params, sizeof(params));
+
+	/* TODO: Support Asynchronous mode */
+	if ((prop->max_freq % stream->params.rate) != 0) {
+		dev_err(bus->dev, "Async mode not supported");
+		return -EINVAL;
+	}
+
+	/* Increment cumulative bus bandwidth */
+	/* TODO: Update this during Device-Device support */
+	bus->params.bandwidth += m_rt->stream->params.rate *
+		m_rt->ch_count * m_rt->stream->params.bps;
+
+	/* Program params */
+	ret = sdw_program_params(bus);
+	if (ret < 0) {
+		dev_err(bus->dev, "Program params failed: %d", ret);
+		goto restore_params;
+	}
+
+	ret = do_bank_switch(stream);
+	if (ret < 0) {
+		dev_err(bus->dev, "Bank switch failed: %d", ret);
+		goto restore_params;
+	}
+
+	/* Prepare port(s) on the new clock configuration */
+	ret = sdw_prep_deprep_ports(m_rt, true);
+	if (ret < 0) {
+		dev_err(bus->dev, "Prepare port(s) failed ret = %d",
+				ret);
+		return ret;
+	}
+
+	stream->state = SDW_STREAM_PREPARED;
+
+	return ret;
+
+restore_params:
+	memcpy(&bus->params, &params, sizeof(params));
+	return ret;
+}
+
+/**
+ * sdw_prepare_stream() - Prepare SoundWire stream
+ *
+ * @stream: Soundwire stream
+ *
+ * Documentation/soundwire/stream.txt explains this API in detail
+ */
+int sdw_prepare_stream(struct sdw_stream_runtime *stream)
+{
+	int ret = 0;
+
+	if (!stream) {
+		pr_err("SoundWire: Handle not found for stream");
+		return -EINVAL;
+	}
+
+	mutex_lock(&stream->m_rt->bus->bus_lock);
+
+	ret = _sdw_prepare_stream(stream);
+	if (ret < 0)
+		pr_err("Prepare for stream:%s failed: %d", stream->name, ret);
+
+	mutex_unlock(&stream->m_rt->bus->bus_lock);
+	return ret;
+}
+EXPORT_SYMBOL(sdw_prepare_stream);
+
+static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
+{
+	struct sdw_master_runtime *m_rt = stream->m_rt;
+	struct sdw_bus *bus = m_rt->bus;
+	int ret;
+
+	/* Program params */
+	ret = sdw_program_params(bus);
+	if (ret < 0) {
+		dev_err(bus->dev, "Program params failed: %d", ret);
+		return ret;
+	}
+
+	/* Enable port(s) */
+	ret = sdw_enable_disable_ports(m_rt, true);
+	if (ret < 0) {
+		dev_err(bus->dev, "Enable port(s) failed ret: %d", ret);
+		return ret;
+	}
+
+	ret = do_bank_switch(stream);
+	if (ret < 0) {
+		dev_err(bus->dev, "Bank switch failed: %d", ret);
+		return ret;
+	}
+
+	stream->state = SDW_STREAM_ENABLED;
+	return 0;
+}
+
+/**
+ * sdw_enable_stream() - Enable SoundWire stream
+ *
+ * @stream: Soundwire stream
+ *
+ * Documentation/soundwire/stream.txt explains this API in detail
+ */
+int sdw_enable_stream(struct sdw_stream_runtime *stream)
+{
+	int ret = 0;
+
+	if (!stream) {
+		pr_err("SoundWire: Handle not found for stream");
+		return -EINVAL;
+	}
+
+	mutex_lock(&stream->m_rt->bus->bus_lock);
+
+	ret = _sdw_enable_stream(stream);
+	if (ret < 0)
+		pr_err("Enable for stream:%s failed: %d", stream->name, ret);
+
+	mutex_unlock(&stream->m_rt->bus->bus_lock);
+	return ret;
+}
+EXPORT_SYMBOL(sdw_enable_stream);
+
+static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
+{
+	struct sdw_master_runtime *m_rt = stream->m_rt;
+	struct sdw_bus *bus = m_rt->bus;
+	int ret;
+
+	/* Disable port(s) */
+	ret = sdw_enable_disable_ports(m_rt, false);
+	if (ret < 0) {
+		dev_err(bus->dev, "Disable port(s) failed: %d", ret);
+		return ret;
+	}
+
+	stream->state = SDW_STREAM_DISABLED;
+
+	/* Program params */
+	ret = sdw_program_params(bus);
+	if (ret < 0) {
+		dev_err(bus->dev, "Program params failed: %d", ret);
+		return ret;
+	}
+
+	return do_bank_switch(stream);
+}
+
+/**
+ * sdw_disable_stream() - Disable SoundWire stream
+ *
+ * @stream: Soundwire stream
+ *
+ * Documentation/soundwire/stream.txt explains this API in detail
+ */
+int sdw_disable_stream(struct sdw_stream_runtime *stream)
+{
+	int ret = 0;
+
+	if (!stream) {
+		pr_err("SoundWire: Handle not found for stream");
+		return -EINVAL;
+	}
+
+	mutex_lock(&stream->m_rt->bus->bus_lock);
+
+	ret = _sdw_disable_stream(stream);
+	if (ret < 0)
+		pr_err("Disable for stream:%s failed: %d", stream->name, ret);
+
+	mutex_unlock(&stream->m_rt->bus->bus_lock);
+	return ret;
+}
+EXPORT_SYMBOL(sdw_disable_stream);
+
+static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
+{
+	struct sdw_master_runtime *m_rt = stream->m_rt;
+	struct sdw_bus *bus = m_rt->bus;
+	int ret = 0;
+
+	/* De-prepare port(s) */
+	ret = sdw_prep_deprep_ports(m_rt, false);
+	if (ret < 0) {
+		dev_err(bus->dev, "De-prepare port(s) failed: %d", ret);
+		return ret;
+	}
+
+	/* TODO: Update this during Device-Device support */
+	bus->params.bandwidth -= m_rt->stream->params.rate *
+		m_rt->ch_count * m_rt->stream->params.bps;
+
+	/* Program params */
+	ret = sdw_program_params(bus);
+	if (ret < 0) {
+		dev_err(bus->dev, "Program params failed: %d", ret);
+		return ret;
+	}
+
+	return do_bank_switch(stream);
+
+	stream->state = SDW_STREAM_DEPREPARED;
+
+	return ret;
+}
+
+/**
+ * sdw_deprepare_stream() - Deprepare SoundWire stream
+ *
+ * @stream: Soundwire stream
+ *
+ * Documentation/soundwire/stream.txt explains this API in detail
+ */
+int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
+{
+	int ret = 0;
+
+	if (!stream) {
+		pr_err("SoundWire: Handle not found for stream");
+		return -EINVAL;
+	}
+
+	mutex_lock(&stream->m_rt->bus->bus_lock);
+
+	ret = _sdw_deprepare_stream(stream);
+	if (ret < 0)
+		pr_err("De-prepare for stream:%d failed: %d", ret, ret);
+
+	mutex_unlock(&stream->m_rt->bus->bus_lock);
+	return ret;
+}
+EXPORT_SYMBOL(sdw_deprepare_stream);
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index ff4b0134897e..7cebb7da1a8c 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -791,6 +791,10 @@  int sdw_stream_remove_master(struct sdw_bus *bus,
 		struct sdw_stream_runtime *stream);
 int sdw_stream_remove_slave(struct sdw_slave *slave,
 		struct sdw_stream_runtime *stream);
+int sdw_prepare_stream(struct sdw_stream_runtime *stream);
+int sdw_enable_stream(struct sdw_stream_runtime *stream);
+int sdw_disable_stream(struct sdw_stream_runtime *stream);
+int sdw_deprepare_stream(struct sdw_stream_runtime *stream);
 
 /* messaging and data APIs */