| Message ID | 20180701172305.15663-5-manivannan.sadhasivam@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index d0ba35df9015..57ae374cfb5a 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "s900.dtsi" +#include "s900-bubblegum-96-pins.dtsi" / { compatible = "ucrobotics,bubblegum-96", "actions,s900"; @@ -35,6 +36,16 @@ clocks = <&cmu CLK_UART5>; }; +&i2c1 { + status = "okay"; + clocks = <&cmu CLK_I2C1>; +}; + +&i2c2 { + status = "okay"; + clocks = <&cmu CLK_I2C2>; +}; + /* * GPIO name legend: proper name = the GPIO line is used as GPIO * NC = not connected (pin out but not routed from the chip to
Enable I2C1 and I2C2 exposed on the low speed expansion connector in Bubblegum-96 board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/actions/s900-bubblegum-96.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) -- 2.17.1